交联聚苯乙烯包覆二氧化锆柱填料的制备与评价

交联聚苯乙烯包覆二氧化锆固定相是在溶液体系中通过自由基引发乙基苯乙烯、二乙烯基苯和乙烯基二氧化锆共聚反应获得。IR和SEM表征这种填料的表面特征，考察了这种交联聚合物包覆柱填料的色谱性能和化学稳定性，并用这种填料分离了苯甲酸酯类和碱性化合物。     

包覆聚合物高效液相色谱柱填料的研究进展

评述了用于高效液相色谱的包覆聚合物填料的研究进展．该类填料以无机载体为基质，包覆以多种有机聚合物层．这些新型填料既保留了有机聚合物和无机基质的优点，又克服了它们各自的缺陷．包覆的聚合物类型包括聚烃、聚醚、聚酰胺、多糖、多肽、聚硅氧烷、聚胺及多核苷酸等，无机基质包括硅胶、铝胶、钛胶、钻胶及多孔石墨化碳等．包覆聚合物固定相可用于几乎所有色谱方式，如反相高效液相色谱、高效离子交换色谱、手性固定相、超临界流体色谱、体积－排阻色谱，以及亲合色谱．     

PICA法制备用于高效液相色谱的锆胶基质柱填料

迄今 ,硅胶基质固定相在 HPLC领域仍占据主导地位 ,但由于它的 p H使用范围窄 ,尤其在碱性条件下基质逐渐溶解 ,其使用受到限制 [1] .为此 ,寻找稳定性能高的新基质成为当前色谱学研究的热点之一 ,二氧化锆因具有良好化学稳定性和机械强度而受到关注 .目前 ,制备微米级、球形和多孔二氧化锆基质柱填料的常用方法有两种 :(1 )油乳化法 (OEM) ;(2 )聚合诱导胶体凝聚法 (PICA) .OEM法操作简单 ,但制备的二氧化锆微球粒径分布宽且孔径较小 .Carr[2 ,3] ,Unger[4 ] ,Rassi[5,6 ]和 Kawahara等[7,8] 在用 OEM法制备二氧化锆微球方面做了…     

液相色谱交联聚苯乙烯固定相的填充

装柱技术是影响液相色谱柱效能的重要因素之一,对硅胶基填料的填充已有深入研究,并有规范操作方法,而对于聚合物微球填料的填充则报道很少。聚合物微球中交联聚苯乙烯不仅具有较好的化学稳定性,而且根据其孔的大小既适于小分子的反     

树状大分子接枝型聚合物色谱分离材料研究进展

随着色谱固定相制备技术和材料科学领域的不断发展,目前已经有大量修饰方法和新型材料被用于固相萃取、高效液相色谱以及离子色谱聚合物固定相填料的功能化修饰。其中聚酰胺-胺(PAMAM)树状大分子由于其独特的结构和性质,在色谱分离材料结构完善和性能提升中也发挥了重要的作用。该文主要综述了PAMAM树状大分子在以聚合物为基质的色谱分离材料修饰中的应用,并对其今后的发展进行了展望。     

气体分离用MOF基混合基质膜的界面构建策略

混合基质膜结合多孔填料优异的气体分离性能和聚合物材料良好的加工性能,被认为是最具有应用前景的一种气体分离膜材料。金属-有机框架材料(MOF)由于具有高比表面积和孔隙率、可调节的孔径以及可修饰的表面性能,成为制备混合基质膜的重要多孔材料。本文针对MOF基混合基质膜制备中所面临的主要挑战,聚焦于MOF和聚合物界面缺陷问题,分析了界面缺陷的产生原因及其对性能的影响,重点阐述了改善MOF填料和聚合物基质界面相容性的策略,以期为制备具有良好的界面形态和优异的气体分离性能的混合基质膜提供借鉴思路。     

附聚型锆胶基质阴离子交换微球的制备

离子色谱作为离子性物质(特别是无机阴离子)的最佳分离分析方法,一直受到分析工作者的关注[1].在离子色谱中,固定相是关键之一[2].当前广泛使用的离子色谱固定相主要有两类:一类是聚合物基质,如Dionex公司推广的薄壳型阴离子树脂填料,动力学性能十分出色].这类填料不仅用于无机正负离子,而且由于其对生物活性分子的相容性,也用于蛋白质等生物样品,它们的pH值适用范围宽,但不耐有机溶剂,刚性较差,高压下会变形,影响溶质传递速率.第二类是聚合物-载体复合基质,最常见的是在硅胶微粒表面键合上各种离子交换基团,如聚苯乙烯涂敷硅胶离子交换剂用于蛋白质、核苷酸的分离[4],国内杨瑞琴也报道了用聚马来酸包覆硅胶分离一价阳离子[5].     

锆胶基质阳离子色谱柱填料的制备

以10μm锆胶微球包覆聚苯乙烯制成强酸、弱酸型的阳离子色谱柱填料,具有良好的色谱性能。使用D ionex-120型双柱离子色谱仪,较好地分离碱金属、碱土金属离子及铵离子,比较了不同交换基团对溶质保留的影响。由于锆胶基质具有高的化学稳定性和机械强度,用作离子色谱柱填料有良好的应用前景。     

基于原子转移自由基聚合和“Click”化学方法制备手性色谱固定相

应用原子转移自由基聚合(ATRP)法和"Click"化学方法,以含叠氮基的烯类化合物为单体,在硅胶表面引发聚合,制备了"梳状"手性固定相.该固定相的合成采用"接出"方法接枝聚合物链,使接枝层更为均匀,并且避免了传统合成方法(如物理吸附等)稳定性差的缺点.所得到的"梳状"手性固定相实现了对一些手性药物的分离;并考察了该固定相中聚合物链的密度和长度对其手性分离能力的影响.     

硅胶基质高效液相色谱填料研究进展

高效液相色谱(HPLC)不仅是一种有效的分析分离手段,也是一种重要的高效制备分离技术。色谱柱是HPLC系统的核心,不同性能的填料是HPLC广泛应用的基础。硅胶是开发最早、研究最为深入、应用最为广泛的HPLC固定相基质,其制备方法主要有喷雾干燥法、溶胶-凝胶法、聚合诱导胶体凝聚法及模板法等。近年来,亚2μm小粒径硅胶、核-壳型硅胶、双孔径硅胶、介孔性硅胶、有机杂化硅胶等新型硅胶应用于HPLC并取得了色谱分离技术的飞速发展,例如基于亚2μm填料的超高压液相色谱技术、基于核-壳型填料的快速分离技术、基于杂化硅胶填料的高温液相色谱技术等。硅胶经表面化学键合、聚合物包覆等有机改性可制得先进的大分子限进填料、温敏性填料、手性填料等,大大扩展了HPLC的应用范围。本文对液相色谱用硅胶的制备方法、改性与修饰方法以及硅胶基质固定相的评价方法加以系统综述,概述了新型硅胶在HPLC中的应用进展,并对硅胶基质填料的发展方向与应用前景进行了展望。     

含酯基包覆聚合物液相色谱柱填料

以丙烯酸甲酯或辛酯和二乙烯苯为原料，在溶液中用游离基聚合法制备了一系列含酯基包覆聚合物反相液相色谱柱填料．用傅立叶红外光谱、电子显微镜和元素分析鉴定了聚合物层，并评价了诸如硅羟基、柱压降、柱效和峰对称性等特性．该类填料适合于含氨基和羟基化合物的分离，作为应用实例，对洛伐他汀（Lovastatin）的分析展示其优良的色谱性能。     

单分散高纯硅胶色谱柱填料的制备

在氨水和氨气催化下使单晶硅粉水解, 合成了单分散、高纯的纳米二氧化硅水溶胶; 再利用聚合诱导胶体凝聚法(PICA)制备单分散脲醛二氧化硅复合微球, 经过高温煅烧后得到球形硅胶色谱柱填料. 通过电感耦合等离子-质谱(ICP-MS)、电子显微镜和BET比表面积测试等手段对球形硅胶的纯度、粒径分布及比表面积进行了表征, 并通过色谱分离对硅胶填料的性能进行了评价. 实验结果表明, 该方法合成的色谱柱填料具有纯度高、粒径分布均匀、机械强度高及分离能力强等优点.     

新型大孔硅质酰胺型聚合物键合相的制备及其对蛋白质的分离

大孔硅胶与乙烯基硅烷反应后,再与甲基丙烯酰胺和二乙烯基苯共聚成一种新型分离蛋白质的色谱柱填料。考察了这种色谱填料对蛋白质的分离能力,认为其具有柱效高、惰性好和分离效率高的优点,聚合物键合相的制备重复性好。并探讨了流动相中离子强度和ｐＨ值对蛋白质分离的影响。     

DETERMINATION OF THE DEGREE OF BONDED PHASE ON THE SURFACE OF SILICA GEL BY XPS

Attention is being increasingly paid to the new material prepared by bonding organic molecules on the surface of silica gel in the preparation of catalyst or packing material for liquid chrotnatographic column.There has not been a quantitative method for determination or characterizing the degree of bonded phase on surface of silica gel yet.This paper provides a new semi-quantitative method.     

Use of alumina with anchored polymer coating as packing material for reversed-phase high-performance liquid chromatography

A new material with anchored polymer coating on alumina can be used as a packing material for the reversed-stationary phase of HPLC columns. The coatings are formed by in situ polymerization of maleic acid adsorbed on alumina with 1-octadecene, with cross-linking by 1,4-divinylbenzene. The chromatographic performance of this material was studied and compared with that of 20–30 μm octadecyl-bonded silica particles and a commercial column packed with 5 μm octadecyl-bonded silica. The results indicate that this new material is a promising alternative to silica-based reversed-phase packings due to its competitive performance and stability in acidic and basic media.     

Endcapping of high performance liquid chromatography packings derived from silica gel

The effect of endcapping a reversed phase chromatographic packing material derived from silica gel depends on the degree of derivatization of the phase. The effect can be dramatic for phases with low loading. Whether an octadecylated silica gel has been endcapped or not can be ascertained by chromatographing the pair naphthalene/1-nitronaphthalene with a water/methanol eluent producing at least k' ≈ 10 for naphthalene. The ratio of the two k' values is 1.4 or higher for an endcapped material, while it is only 1.1 -1.2 for a non-endcapped phase. A similar approach fails to give conclusions of similar utility for octylated silica gels.     

Dynamically modified silica — the use of bare silica in reversed-phase high-performance liquid chromatography

A new approach to reversed-phase high-performance liquid chromatography has been developed and investigated in some detail. Bare silica is used as the column packing material with an aqueous eluent containing a buffer, an organic solvent as the modifier and a long-chain quaternary ammonium ion. The eluent exhibits a high affinity to the silica surface at pH values above 5, thus, dynamically, forming a nonpolar stationary phase.     

Mechanism of ion stacking in aqueous partition chromatographic processes

It has been reported that ion enrichment phenomena are observed in liquid chromatographic processes with an aqueous mobile phase on the columns packed with nonionic materials. However, the mechanism of the ion enrichment is not at all well understood. In this study, we investigated the retention and enrichment behaviors of simple inorganic anions on a C18‐bonded silica column and a cross‐linked hydroxylated methacrylic polymer gel column with pure aqueous mobile phases containing various electrolytes. We show that the stacking of ionic solutes can successfully be accounted for by the ion partition model, and it takes place due to the effect of the background coion in the eluent and/or sample solution on the distribution of the ions between the bulk water and the water incorporated in the packing material, which acts as the stationary phase. Using the ion exclusion effect of fixed anionic charges on a packing material as well as the ion stacking by partition, we developed a simple and versatile method for effective enrichment of anionic solutes in aqueous solutions. The enrichment factor and the elution time of the stacked ion zone can be predicted by the ion partition model.     

High performance liquid chromatography characterization of macromolecules

A new method, temperature gradient interaction chromatography(TGIC) is employed for the characterization of macromolecules. Fine and reproducible control of interaction between polymer chains and the alkyl chain bonded silica packing material can be achieved by varying the temperature of the column. This method provides a far superior resolution to the conventional size exclusion chromatography. In addition, this method has a high sample loading capacity to be effective for preparative purpose. Furthermore, this method can be used to characterize binary polymer mixtures, where one component of a polymer mixture is separated by the size exclusion mechanism and the other is by the interaction mechanism simultaneously from single isocratic elution.