用稳定自由基聚合及光引发聚合制备嵌段共聚物

介绍了稳定自由基聚合的反应原理、引发剂设计，以及用稳定自由基聚合制备嵌段共聚物的几种方法：连续加料法、双官能团引发剂法和一步法。对于光引发聚合的原理及硫自由基的稳定性对聚合反应的影响也进行了讨论。     

硫代-Iniferters法活性自由基嵌段共聚合

自由基活性聚合近来发展很快,本文在概述了自由基活性聚合及其最新进展的基础上,对硫代－Ｉｎｉｆｅｒｔｅｒｓ法自由基活性聚合的机理,硫代－Ｉｎｉｆｅｒｔｅｒｓ法大分子引发剂的合成以及这些大分子引发剂在嵌段共聚物的制备等方面进行了综述。     

双官能度自由基引发剂应用研究的进展

双官能度引发剂在自由基聚合中的应用不断受到重视，本文介绍了常用的双官能度引发剂，并综述了其在制备嵌段共聚物及引发乙烯类单体（如苯乙烯、氯乙烯、丙烯酰胺等）聚合的研究进展。     

非线形嵌段共聚物的合成

主要介绍了非线形嵌段共聚物,如星型嵌段共聚物、杂臂星型共聚物、梳型聚合物等的合成方法,包括多官能团引发剂法、大分子引发剂法等。各种活性聚合方法,如阳离子开环聚合、原子转移自由基聚合(ATRP)和氮氧稳定自由基聚合等都可以用于合成非线形嵌段共聚物。     

大分子引发剂的合成及其在嵌段共聚中的应用

一、前言大分子引发剂(macroinitiator)是指在分子链上带有可分解成自由基的偶氮、过氧基的高分子化合物。早在五十年代,Shah就报道过这种高分子化合物的合成,他用邻苯二甲酰氯与过氧化钠反应制成聚邻苯二甲酸过氧化     

甲基丙烯酸甲酯的反向原子转移自由基聚合反应 研究

在较低的温度(60℃)和较低的AIBN/CuCl~2/配位剂摩尔比(1:2:4)条件下,用乙腈为溶剂,实现了甲基丙烯酸甲酯(MMA)的反向原子转移自由基聚合(RATRP)。联二吡啶(bpy)为配位剂时,所合成的聚甲基丙烯酸甲酯(PMMA)的分子量分布可低至1.08。用1,10-菲咯啉(phen)代替bpy,MMA的聚合反应速率加快,但其分子量分布稍宽(1.40左右),并进一步研究了bpy和phen作为混合配位剂时对MMA反向ATRP聚合的影响。用RATRP反应所得的带有卤素端基的PMMA作为苯乙烯ATRP的大分子引发剂,成功地合成了具有预期结构的苯乙烯与甲基丙烯酸甲酯嵌段共聚物,大分子引发剂的引发效率接近于1,说明在RATRP过程中由自由基引发剂引发MMA进行一般自由基聚合反应的可能性甚微。     

用ATRP法和RAFT法制备线形嵌段共聚物

嵌段共聚物是将不同性质的聚合物连接在同一分子内，表现出特殊的性质，受到高分子科学家及工业部门的广泛关注。本文简要介绍了嵌段共聚物的结构、性能以及可能的应用。它有多种制备方法，这里着重介绍近年来通过原子转移自由基聚合(ATRP)和可逆加成-裂解链转移(RAFT)法制备嵌段共聚物的研究现状和进展情况。对于加料顺序、大分子引发剂末端基团、单体的反应活性以及大分子引发剂的引发效率、配体种类、大分子链转移剂的链转移常数等对嵌段共聚反应的影响也进行了讨论。     

用大分子引发剂法制备嵌段共聚物

主要介绍了用大分子引发剂法制备嵌段共聚物的方法。大分子引发剂是从已商品化的功能聚合物制得或用其它活性聚合方法合成。从单封端的端羟基聚合物、其它单官能团或双官能团聚合物以及双功能基团缩聚物制得大分子引发剂．然后用于原子转移自由基聚合(ATRP)、氮氧稳定自由基聚合以及可逆加成裂解链转移(RAFT)聚合等．可制得结构可控、分子量分布窄的嵌段共聚物。     

甲基丙烯酸丁酯和苯乙烯的原子转移自由基共聚

研究了甲基丙烯酸丁酯（ＢＭＡ）和苯乙烯（Ｓ）这两种不同极性单体的原子转移自由基嵌段共聚和无规共聚,得到了实测分子量与理论分子量相近,分子量分布较窄的嵌段共聚物和无规共聚物．聚合过程中分子量和单体转化率成比例增加,多分散性指数变化不大．用１Ｈ ＮＭＲ法测定共聚组成,Ｋｅｌｅｎ Ｔｕｄｏｓ法计算竞聚率．得到ｒＳｔ＝０９１,ｒＢＭＡ＝０３２．     

4,4‘—偶氮二（4氰基戊酰对甲苯胺）的合成及其用作嵌段共聚合引发剂

合成了一类新型的含偶氮基和对甲苯基氨基甲酰基的多功能引发剂，４，４’偶氮二（４氰基戊酰对甲苯胺）．测定其偶氮键热分解反应为一级反应，分解活化能为１２４６ＫＪ·ｍｏｌ－１．利用引发剂中对甲苯氨基甲酰与Ｃｅ（ＩＶ）盐的氧化还原引发单体聚合，得到含有偶氮端的预聚物，它在６５℃热分解引发另一单体聚合生成嵌段共聚物．纯化后的共聚物，经ＩＲ等结构表征为嵌段共聚物     

Synthesis of star polymers via nitroxide mediated free‐radical polymerization: A “core‐first” approach using resorcinarene‐based alkoxyamine initiators

The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007     

Versatile cobalt complexes for initiating immortal ring‐opening polymerization (ROP) of lactide (LA), mediating living radical polymerization of t‐butyl acrylate (tBA) and catalyzing copolymerization of LA and tBA by combination of ROP and organometallic‐mediated radical polymerization

Low‐cost, highly active and versatile amino‐bis(phenolate) cobalt complexes are developed. The cobalt complexes can control living polymerization of different categories of monomers including lactide (LA) by immortal ring‐opening polymerization in argon and even in air and acrylate via living radical polymerization (LRP). The cobalt‐based catalysts were used for copolymerization of LA and acrylate. The immortal polymerization of LA using the cobalt complexes as initiators proceeds in argon and even in air and without the requirement for extensive drying techniques or inert atmosphere whilst retaining end‐group fidelity. The cobalt complexes are used to mediate LRP of t‐butyl acrylate (tBA) in methanol. The block copolymerization of LA and tBA catalyzed by single‐site cobalt organometallic catalyst is also reported for the first time. This cobalt system offers a versatile and green way to produce homopolymers and block copolymers.     

温敏性嵌段共聚物纳米胶束的制备及其稳定性

通过N-异丙基丙烯酰胺(NIPAAm)和N,N-二甲基丙烯酰胺(DMAAm)在链转移剂巯基乙醇存在下的自由基共聚,制备了具有端羟基的共聚物P(NIPAAm-co-DMAAm).利用其端羟基在异辛酸亚锡催化下引发己内酯开环聚合,得到了两亲性嵌段共聚物P(NIPAAm-co-DMAAm)-b-PCL,并在聚己内酯(PCL)链末端引入可光催化反应的不饱和双键.通过1H-NMR、GPC和相转变温度(LCST)等方法对聚合物进行了结构表征,测定了嵌段共聚物形成胶束的临界胶束浓度和胶束粒径,比较了核交联前后胶束的粒径和稳定性.结果表明:通过调节共聚物的组成,可获得LCST在40℃附近的胶束,胶束经核交联后,粒径有所减小,但稳定性明显提高,可用于对药物的温敏控制释放.     

RAFT聚合合成高分子量嵌段聚合物

以合成高分子量聚合物为目标,以苯基二硫代乙酸-1-苯基乙酯(PEPDTA)作为RAFT试剂,研究引发剂的种类(偶氮二异丁腈(AIBN)、1-1′-偶氮环己腈(ACC))、用量及聚合温度对苯乙烯/丙烯酸丁酯RAFT共聚合过程和聚合物结构的影响.结果发现,由于体系中RAFT浓度很低,相应的引发剂浓度要比传统自由基聚合低得多,只有采用较高的聚合温度和低分解速率常数的引发剂(ACC),才能制得无活性聚合物分率低(<0.1)、分子量高的聚合物,并进一步得到杂质含量少、分子量分布窄的嵌段聚合物.     

Polymerization and Copolymerization Studies of Orthoacrylates: A Novel Class of Acrylic Esters

Although ortho-esters constitute a well-known class of organic compounds, the orthoacrylates were unknown prior to a report from these laboratories in 1972. To date, this novel class of acrylic esters has not been investigated as polymerization monomers. We report here polymerization and copolymerization studies of representative members of this class of compounds. Although the orthoacrylates studied did not polymerize in the presence of conventional cationic initiators nor radical initiators, they did respond to radical-initiated copolymerization with a variety of conventional vinyl monomers. Their corresponding reactivity ratios were determined, as well as the Q and e parameters. Monomer syntheses and characterization are reported, as well as structural and properties studies on the copolymers.     

The anionic ring-opening polymerization and copolymerization of cyclic carbonates

Cyclic carbonates are eligible to ring-opening polymerization using a wide variety of initiators such as carbanionic or alcoholate species as well as initiators known to be effective for the ring-opening polymerization of lactones and for the group transfer polymerization of vinyl monomers. Depending on the catalyst, high molecular weight polymers may be obtained in high yields (kinetically controlled regime) or a ring-chain equilibrium is observed upon end-biting, back-biting and transesterification reactions (thermodynamically controlled regime). The polymerizability of the cyclic carbonates is strongly dependent on their structure. Five-membered cycles generally cannot be polymerized, whereas six-membered cycles can be polymerized and copolymerized in an ideal manner. The polymerizability of higher cyclics, in particular when containing aromatic ring systems, is highly dependent on the substitution pattern of the aromatics. Since the active species in the polymerization of aliphatic cyclic carbonates was disclosed to be of alcoholate type, a copolymerization with ϵ-caprolactone is easily achieved, the reactivity of the cyclic carbonate, however, being by far larger than that of the lactone. On the other hand, the copolymerization with pivalolactone exerts a different behaviour, since the active species of the growing pivalolactone chain after a few steps assumes the character of a carboxylate anion which is unable to promote the ring-opening polymerization of cyclic carbonates. Since carbanionic species may be used as initiators for the ring-opening polymerization of cyclic carbonates, polystyryl, polybutadienyl, and polyisoprenyl anions may be used as initiators to achieve the corresponding block copolymers. To obtain block copolymers with poly(methyl methacrylate) blocks a group transfer polymerization of the respective acrylate has to be performed, followed by the polymerization of the cyclic carbonate. The latter, however, rather proceeds by a metal- free anionic process than by a group transfer process. The ring-opening polymerization and copolymerization of cyclic carbonates allows the preparation of a broad variety of new polymers with remarkable properties.     

Rare earth metal initiated ring‐opening polymerization of lactones

The progress in the synthesis of organolanthanide complexes supports the exploration of these compounds as initiators for ring‐opening polymerization (ROP) of lactones. The performance of these initiators in terms of yield, molecular weight, polydispersity, stereoregularity is affected by the ligands and by the oxidation state of the respective rare earth metals. Several initiators are known to initiate living polymerization of lactones with excellent polydispersities of the thus obtained polymers. Differences in the performance of the initiators are caused by differences in the initiation mechanism, chain growth mechanism, or side reactions. ROP of lactones was extended to block‐ and graft copolymerization with polylactones, polylactides, and polyolefins either by simply utilizing living polymer chain ends, by transformation of living polymer chain ends, or by usage of polyinitiators.     

Coagulum formation and elimination in emulsion copolymerization of tribromostyrene with styrene

Coagulum formation in emulsion polymerization of tribromostyrene and also in its copolymerization with styrene has been shown to be due to thermal polymerization. The latter takes place in the monomer reservoirs, even in the absence of radical generating initiators, converting them into sticky particles which then form the undesired coagulum. The coagulum formation phenomenon can thus be remedied by reducing the thermal initiation level through a semi-batch emulsion polymerization method, by lowering the polymerization temperature, and reduction of the collision frequency of monomer/polymer particles.     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

Resorcinarene‐based ATRP initiators for star polymers

Two novel multifunctional initiators for atom transfer radical polymerization (ATRP) were synthesized by derivatization of tetraethylresorcinarene. The derivatization induced a change in the conformation of the resorcinarene ring, which was confirmed by NMR spectroscopy. The initiators were used in ATRP of tert‐butyl acrylate and methyl methacrylate, producing star polymers with controlled molar masses and low polydispersities. Instead of the expected star polymers with eight arms, polymers with four arms were obtained. Conformational studies on the initiators by rotating‐frame nuclear Overhauser and exchange spectroscopy NMR and molecular modeling suggested that of eight initiator functional groups on tetraethylresorcinarene, four are too close to each other to be able to initiate the chain growth. Starlike poly(tert‐butyl acrylate) macroinitiators were used further in the block copolymerization of methyl methacrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4189–4201, 2004