生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究

制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.     

活性聚合法合成结构精确的含氟嵌段共聚物

结构精确的含氟嵌段共聚物具有优异而独特的化学和物理性能,有广阔的应用前景,因此受到广泛的关注.含氟嵌段共聚物可分为两类,一类是侧基含氟嵌段共聚物,另一类是主链含氟嵌段共聚物.活性聚合为嵌段共聚物的合成提供了最为重要的方法,利用它可以合成结构精确、分子量可控、分子量分布窄的嵌段共聚物.根据单体的反应特性选择不同的聚合方法,可以得到不同的含氟嵌段共聚物.本文主要综述了近几年利用各种活性聚合方法合成结构精确的含氟嵌段共聚物方面的进展.     

蓖麻油与乳酸的共聚物合成与表征

用熔融聚合法合成了一种蓖麻油和乳酸的共聚物.以丁二酸酐作为共聚体系的引发剂和封端剂,制得端羧基共聚物P(LA-CO)-COOH.研究了反应条件对共聚物分子量的影响,通过核磁共振表征了共聚物的结构.DSC和TG研究表明,蓖麻油链段的引入破坏了聚乳酸的结晶性,提高了共聚物的热稳定性.     

乙烯基单体-N-取代马来酰亚胺共聚物玻璃化温度研究

用差示扫描量热仪对乙烯基单体/N-取代马来酰亚胺共聚物的玻璃化温度(T_g)进行测定.研究了共聚物组成、序列结构、乙烯基单体和N-取代马来酰亚胺种类对共聚物T_g的影响.提出了含共聚物组成和序列结构的T_g预测方程,该方程不仅适合于无规共聚物,还适合于具有严重交替倾向的共聚物.     

偶氮液晶嵌段共聚物自组装和光响应性研究进展

偶氮液晶嵌段共聚物是指分子中带有偶氮苯基团的液晶嵌段共聚物.偶氮液晶嵌段共聚物兼具偶氮聚合物的光响应性和液晶嵌段共聚物自组装形成多尺度有序结构的特性,是一类有重要应用前景的新材料.本文简要综述了近10年来偶氮液晶嵌段共聚物的研究进展,以几种典型的偶氮液晶嵌段共聚物为例,介绍嵌段共聚物在本体以及溶液状态下自组装,自组装形貌的光致变化,以及偶氮液晶嵌段共聚物在光全息存储领域等的研究进展.     

~(13)C-NMR方法研究酚酞聚芳醚酮砜共聚物的序列结构

通过亲核共缩聚合成了一系列酚酞聚芳醚酮砜共聚物和嵌段共聚物 ,并利用1 3C NMR方法研究了共聚物的链结构 ,通过观察酚酞单元中三个位置的季碳原子的化学位移及其相应强度的变化 ,计算共聚物中不同链段的共聚物的组成、平均序列长度和无规度 .结果表明 ,除嵌段共聚物外 ,其它共聚物的无规度均接近 1 ,表明共聚物为无规共聚物 ,而且对三个位置的季碳原子分析均得出了相同的结果 .     

接枝共聚合

在高分子组成中,含有两种以上单体环节者称为共聚物,它们的合成方法称为共聚合,共聚物按其结构来分可以有下面四种类型:1.无规共聚物……AABABBBAABBAA……2.交替共聚物……ABABABAB……3.嵌段共聚物……AAAAAAA—BBBBBB—     

环氧丙烷聚醚三元醇/聚乳酸嵌段共聚物的合成与性能

以低不饱和度环氧丙烷聚醚三元醇与L型及DL型丙交酯为原料, 合成了不同单体物质的量比的聚醚与聚乳酸嵌段共聚物. 采用FTIR, 1H NMR, GPC对共聚物的结构进行了表征; 用DSC, DTA对共聚物的玻璃化转变温度、熔点及热分解温度进行了研究. 结果表明, 丙交酯在聚醚多元醇端羟基的引发下发生开环反应, 得到聚环氧丙烷L型乳酸(POLLA)或聚环氧丙烷DL型乳酸(PODLA)二嵌段共聚物. POLLA二嵌段共聚物具有结晶能力, 且随着L型聚乳酸链段的增长而增强. PODLA二嵌段共聚物为非晶态聚合物. 两种共聚物的玻璃化转变温度与共聚物的组成有关, 其值介于聚醚和聚乳酸玻璃化转变温度之间. 与聚醚三元醇相比, 二嵌段共聚物的耐热性得到提高, 其热分解温度提高了30～60 ℃, 约为235～262 ℃. 共聚物的结构和组成对材料的热降解机制有很大影响. PODLA在高温区发生热氧化降解.     

聚醚醚酮链段连接方式与其性能关系的研究

利用亲核取代反应,通过缩聚法合成了一种新型聚芳醚酮50％交替共聚物PEDEK-PETMDEK,通过¹HNMR证明其具有预期的结构.通过考察50％无规共聚物、50％交替共聚物、均聚物PEDEK和PET-MDEK的溶解性和热性能,发现聚醚醚酮共聚物的链段连接方式对聚合物性能有很大影响.50％交替共聚物是一种无定形固体,易溶于通常的有机溶剂,而50％无规共聚物却是半结晶聚合物,除浓硫酸外几乎不溶于任何溶剂;50％交替共聚物具有比50％无规共聚物更高的玻璃化转变温度.     

聚(L-丙氨酸-co-羟丙-L-谷氨酰胺)无规共聚物的两亲性及其胶束行为研究

采用丙氨酸作为疏水聚合单体,谷氨酸作为亲水聚合单体,一步开环聚合反应,合成了具有两亲性的聚氨基酸无规共聚物.利用IR,1H-NMR等方法对所合成的聚合物进行了详细的表征,结果表明两种单体都能够按照投料比参加聚合反应生成无规共聚物.对比聚丙氨酸-聚羟丙谷氨酰胺嵌段共聚物,探讨了无规共聚物与嵌段共聚物在两亲性及结构性质上的差异和特点.研究表明,聚(L-丙氨酸-co-羟丙-L-谷氨酰胺)无规共聚物与嵌段共聚物一样,具有两亲性,在水溶液中也能够形成胶束,但胶束尺寸较嵌段共聚物要小,胶束形态也不像嵌段共聚物是规整的球形.实验发现,亲疏水单体的比例对胶束的形成有很大影响,P(A10-co-HPG40)所制得的胶束分散最为均匀.所形成的胶束以疏水的聚丙氨酸为内核,亲水的聚羟丙谷氨酰胺为外壳.     

甲基丙烯酸甲酯-苯乙烯-N-苯基马来酰亚胺三元共聚物的研究

 研究了甲基丙烯酸甲酯-苯乙烯-N-苯基马来酰亚胺三元共聚体系的组成以及分子量分布对共聚物的耐热及物理机械性能的影响.实验结果表明:在一定条件下如果适当控制混合单体比例,可望获得一种综合性能较优越的共聚物材料.     

耐热聚氯乙烯的耐热机理研究

用悬浮聚合方法制得了氯乙烯 N 苯基马来酰亚胺 ( 丙烯腈 )共聚物 ,研究了该共聚物的维卡软化点、玻璃化温度、动态力学行为以及形态结构 .发现当耐热组分达到一定含量时 ,耐热性能的增加幅度发生变化、出现两个动态力学内耗峰、形态上出现双连续相结构 .基于这些实验现象 ,提出了“刚性有效网架”可以使耐热性能大幅度提高的观点 ,并探讨了耐热机理 ,给出了物理模型 .讨论了相容性对“刚性有效网架”形成的影响     

Surface and bulk modification of ethylene-propylene-diene terpolymer elastomer: Adhesion to polyurethane and mechanical properties

Effect of adding millable polyurethane as adhesion promoter to the ethylene-propylene-diene terpolymer as well as to the terpolymer modified by grafting of maleic anhydride on the adhesion between the terpolymer and polyurethane coating was studied. The results of peel test and water contact angle measurements showed that surface and bulk modification of terpolymer cause a significant improvement in its adhesion properties. The effect of the composition of the polymer blends on the loss tangent was studied to evaluate the extent of polymer compatibility and damping characteristics. Results demonstrated that modification of terpolymer with maleic anhydride can improve its compatibility with polyurethane, which was further confirmed by the results of the mechanical and morphological study.     

Study of the physicochemical properties of aminostyrene copolymers modified by plasma treatment

The change in the surface and mechanical properties of styrene-butyl methacrylate-aminostyrene terpolymer films by plasma treatment was investigated. It was found that treatment in a direct-current discharge enhanced the mechanical strength of the terpolymer surface, which can be associated with the crosslinking of linear macromolecules into a three-dimensional network structure. It was shown that the most substantial changes in the mechanical strength are achieved in the case of terpolymer film treatment at the anode.     

Polyolefin blends

Polyolefin blends of proper morphology exhibit physical properties from high-extension, low-modulus elastomers to high-modulus tough resins. The morphology is controlled by rheology of the polymers, blending conditions and the use of graft polymer compatibilizers. The graft polymers were synthesized by polymerizing isotactic polypropylene with unsaturation in an ethylene-propylene-diene terpolymer. Graft copolymers result in smaller phase sizes and a more stable morphology for the blends. The development of polyolefin blends is reviewed with emphasis on materials with high concentration of elastomer phase.     

Development and characterisation of vinyloxyaminosilane grafted ethylene-propylene-diene terpolymer (EPDM-g-VOS) for engineering applications

A novel and new copolymer of vinyloxyaminosilane grafted ethylene-propylene-diene terpolymer (EPDM-g-VOS) has been synthesised in toluene using dicumyl peroxide as initiator. The grafting efficiency of vinyloxyaminosilane (VOS) onto ethylene-propylene-diene terpolymer (EPDM) has been studied as a function of EPDM content, reaction time, reaction temperature and initiator concentration. Using the optimum grafting efficiency conditions, EPDM-g-VOS has also been developed in a Haake Rheocord-90, torque rheometer. The grafting of vinyloxyaminosilane onto ethylene-propylene-diene terpolymer (EPDM-g-VOS) has been confirmed by Fourier-transform infrared spectroscopy. The mechanical, thermal, and electrical, properties of hot water cured EPDM-g-VOS and peroxide cured EPDM are compared. The mechanical properties of EPDM-g-VOS are decreased due to the flexibility imparted by VOS. However thermal and dielectric properties are increased due to the introduction of VOS onto EPDM as well as the formation of thermally stable three dimensional network through Si-O-Si- linkage.     

Étude de la compatibilité d'un système polyamide/phase caoutchoutique modifiée par l'anhydride maléique—I. Étude de la modification de la phase caoutchoutique par l'anhydride maléique

The study deals with the variation of physical properties of a blend (50/50 polyethylene/terpolymer ethylene-propylene-diene monomer) due to chemical modification by maleic anhydride. This compound is generally used as a rubbery domain in polyamide resins. The chemical modification induces cross-linking the amount of which is clearly revealed by the variation of the elastic modulus and the residual deformation of the samples. The crystallization ratio of the polyethylene, measured by differential scanning calorimetry, is also related to the chemical modification. This effect may be due to an increase in the miscibility of the two constituents of the blend.     

Nanoscale indentation of polymer and composite polymer-silica core-shell submicrometer particles by atomic force microscopy

Atomic force microscopy was employed to probe the mechanical properties of surface-charged polymethylmethacrylate (PMMA)-based terpolymer and composite terpolymer core-silica shell particles in air and water media. The composite particles were achieved with two different approaches: using a silane coupling agent (composite A) or attractive electrostatic interactions (composite B) between the core and the shell. Young's moduli (E) of 4.3+/-0.7, 11.1+/-1.7, and 8.4+/-1.7 GPa were measured in air for the PMMA-based terpolymer, composite A, and composite B, respectively. In water, E decreases to 1.6+/-0.2 GPa for the terpolymer; it shows a slight decrease to 8.0+/-1.2 GPa for composite A, while it decreases to 2.9+/-0.6 GPa for composite B. This trend is explained by considering a 50% swelling of the polymer in water confirmed by dynamic light scattering. Close agreement is found between the absolute values of elastic moduli determined by nanoindentation and known values for the corresponding bulk materials. The thickness of the silica coating affects the mechanical properties of composite A. In the case of composite B, because the silica shell consists of separate particles free to move in the longitudinal direction that do not individually deform when the entire composite deforms, the elastic properties of the composites are determined exclusively by the properties of the polymer core. These results provide a basis for tailoring the mechanical properties of polymer and composite particles in air and in solution, essential in the design of next-generation abrasive schemes for several technological applications.     

Efficient formation of multicompartment hydrogels by stepwise self-assembly of thermoresponsive ABC triblock terpolymers

The gelation behavior of a poly(ethylene-alt-propylene)-b-poly(ethylene oxide)-b-poly(N-isopropylacrylamide) (PON) triblock terpolymer and a poly(N-isopropylacrylamide)-b-poly(ethylene oxide)-b-poly(N-isopropylacrylamide) (NON) triblock copolymer was studied by rheology over the concentration range 1-5 wt %. In comparison to the NON copolymer, gelation of the PON terpolymer was achieved at a much lower concentration, with a much sharper sol-gel transition. This is due to a stepwise gelation of PON terpolymers involving micellization at room temperature and gelation at elevated temperatures. The separation of micellization and gelation leads to the formation of a two-compartment network as observed by cryoTEM. The results highlight the intricate and tunable nanostructures and new properties accessible from ABC terpolymer hydrogels.     

Mechanical and thermo‐mechanical studies of double networks based on thermoplastic elastomers

A new approach to prepare and characterize double network elastomeric systems was investigated. A styrene‐ethylene‐co‐butylene‐styrene (SEBS) triblock copolymer system containing physical crosslinks was used to achieve a double network by additional crosslinking using ultra‐violet (UV) light. An ethylene–propylene–diene monomer (EPDM) terpolymer system containing chemical crosslinks was used to achieve a conventional double network using UV crosslinking. Properties from conventional monotonic tensile tests, dynamic mechanical analysis, and thermomechanical properties were investigated. These double network elastomers show a transition between competitive and collaborative behavior in their mechanical properties and lower coefficients of thermal expansion arising from a competition of the networks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 778–789, 2010