Synthesis of New Calix[4]arenes Functionalizated by Acetylhydrazide Groups

A series of new calix[4]phenols, calix[4]resorcinols and calix[4]pyrogallols with acetylhydrazide substitutes has been␣synthesized with high yields by hydrazinolysis of ester group containing calix[4]arenes. The synthesized calix[4]phenols adopt the cone conformation while the calix[4]resorcinol and calix[4]pyrogallol derivatives prefer the boat conformation. The amide fragment of the hydrazide groups predominantly exists in the trans-conformation. The binding ability of synthesized calix[4]arenes toward transition and alkali metals by solvent extraction has been investigated.     

Construction of Hydrocarbon Nanobelts

Linearly fused hydrocarbon nanobelts are a unique type of double‐stranded macrocycles that would serve as not only the powerful hosts in supramolecular science but also the templates to grow zig‐zag carbon nanotubes with defined diameters. Fully conjugated hydrocarbon nanobelts such as belt[n]arenes would also possess unique physical and chemical properties. Despite the importance, both fully conjugated and (partially) saturated hydrocarbon nanobelts remain largely unexplored because of the lack of cyclization methods. Reported here is the construction of nanometer sized H₁₂‐belt[12]arenes based on the strategy to close up all fjords of resorcin[6]arene by means of six‐fold intramolecular alkylation reactions of resorcin[6]arene derivatives. All resulting H₁₂‐belt[12]arenes produce a very similar nanobelt core structure with six benzene rings and six boat 1,4‐cyclohexadiene rings being alternately linear‐fused to give a nearly equilateral hexagonal cylinder. The average long diagonal is around 1 nm and the height of the cylinder is about 0.3 nm. The acquired H₁₂‐belt[12]arenes would be the potential precursors to various hydrocarbon nanobelts including fully conjugated belt[12]arenes.     

Analysis of Calix[4]arenes Using Nonaqueous Capillary Electrophoresis

In nonaqueous capillary electrophoresis (NACE), an organic solvent is used in place of an aqueous medium as the background solution to improve the solubility and selectivity for hydrophobic analytes. In this study, we employed NACE with UV detection for the analysis of eight calix[4]arenes. We examined the influence of several parameters—the buffer composition, the nonaqueous solvent‘s composition and proportion, and the concentration of the electrolyte of the nonaqueous buffer—on the efficiency of the electrophoretic separation. The separation was achieved through the analyte's different effective mobility via different degrees of deprotonation on the phenolic OH groups of the calix[4]arene. This deprotonation can further affect the analyte's ability to form a complex with the metal ion. The optimized background electrolyte (BGE), comprising a mixture of N‐methylformamide/acetonitrile (30:70, v/v) and 100 mM AcOH/20 mM NH₄OAc, provided rapid (<11 min) separation of the calix[4]arenes with good resolution. The relative standard deviations of the migration times for the eight analytes were all less than 1%. Within the calibration concentration range, the coefficients of determination (R²) were all greater than 0.9914. Thus, the present study demonstrated NACE can provide adequate separation for the analysis of calix[4]arenes.     

Synthesis and Complexing Properties of Four New Tetraamido-type p-tert-Butyl Calix[4]arenes Presenting Two Proximal Binding Subunits

The synthesis of four new tetraamido-type p-tert-butylcalix[4]arenes presenting two proximal binding subunits is reported. Complexation of alkalimetals and zinc picrates with these ligands have been carried out and monitored by ¹H-NMR inCDCl₃. It is shown that hard cations are included in the tetraamido cavity while thezinc cation is chelated to the pyridine rings of one of the ligands. The formation of a 1:1:1heterobinuclear complex is also described     

Synthesis and evaluation of neutral anion receptors based on acylhydrazide-appended calix[4]arenes

A new class of neutral receptors based upon acylhydrazide-appended calix[4]arenes was synthesised and evaluated for recognition of anions. Detailed NMR and single-crystal X-ray analyses of one of the synthesised compounds reveal that anion recognition in such derivatives is achieved through cooperative hydrogen bond interactions. The presence of three centred NH–O and two OH–O hydrogen bonds at the lower rim of the synthesised calixarene architecture apparently helps the molecular scaffold to retain cone conformation to enable deployment of intermolecular hydrogen bonds for selective recognition of HSO₄ ^? ion in preference to F^?, Cl^?, Br^?, I^?, ClO₄ ^?, AcO^? and PF₆ ^? ions.     

25-Alkoxy-26-benzoyloxycalix[4]arenes: the reaction mechanism of benzoyl migration

In the presence of K₂CO₃ as reaction base, the 25-alkoxy-27-benzoyloxy-calix[4]arenes were converted into 25-alkoxy-26-benzoyloxy derivatives by benzoyl-migration. A benzoyl-migrated reaction mechanism with a cyclic orthobenzoate-like intermediate was proposed, and the mechanism was supported by the identical reaction results on the conversion of 25-ethoxy-27-benzoyloxycalix[4]arene to 25-ethoxy-26-benzoyloxycalix[4]arene, and vice versa.     

Calixarene-Based Dendrimers. A Timely Review

This timely review focuses on the synthesis of dendrimers from calix[4]arenes and thiacalix[4]arenes. Some interesting features of these calix-dendrimers are given.     

Intramolecular co-operative hydrogen bond in calix[<Emphasis Type="Italic">n</Emphasis>]arenes (<Emphasis Type="Italic">n</Emphasis> = 4, 6, 8) bearing bulky substituents

Based on the Fourier transform IR spectroscopy together with the published NMR and X-ray data, it was shown that cyclic co-operative intramolecular hydrogen bond in calix[n]arene (n = 4, 6, 8) molecules is mainly responsible for their conformational state irrespective of the presence or absence of bulky substituents at the upper rim of the molecules. In accordance with the size of a macrocycle (n = 4, 6, 8), the stable conformation, secured by such a hydrogen bond, constitutes a cone, a pinched cone, and a pleated loop, respectively. The new, potentially competing system of hydrogen bonds in calix[6]arenes with 3-carboxymethyl-1-adamantyl substituents does not affect the conformational state of the macrocycle and its H-bonding. Six carboxy groups at the upper rim form in pairs three cyclic dimers, which does not disturb the hydrogen bonds of the hydroxy groups and the conformation of the macrocycle. In addition, the cavity of the molecule is considerably enlarged. The removal or rearrangement of the guest molecules in the solid calixarene by heating up to 180 °C only slightly affects the conformational state of macrocycles bearing bulky substituents, whereas in calixarenes devoid of such substituents, the similar procedure leads to somewhat of a distortion of the macrocycles (judging from the IR spectral indications of hydrogen bonding). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1062–1068, June, 2007.     

Design,synthesis and structure determination of new inherently chiral para-bromoalkoxycalix[4]arenes

The preparative method for the synthesis of inherently chiral para-bromoalkoxycalix[4]arenes based on para-bromination, stepwise regioselective debenzoylation and the following alkylation of the readily available 25-propoxy-26,27-dibenzoyloxycalix[4]arene with propyl bromide or (R)-N-(1-phenylethyl)bromoacetamide has been developed. Three types of the inherently chiral calix[4]arenes in cone or partial cone conformations with asymmetrical (_AHHH^HBHH, _AAHH^HBHH, _AHBH^HCHH) substitution of both upper and lower rims have been obtained in racemic, diastereomerically pure or enantiomerically pure forms. Their structure and the absolute configuration have been determined by NMR and X-ray.     

Expanded Mercaptocalixarenes: A New Kind of Macrocyclic Ligands for Stabilization of Polynuclear Thiolate Clusters

The syntheses and properties of expanded 4-tert-butyl-mercaptocalix[4]arenes, in which the methylene linkers are replaced by −CH₂NRCH₂− or −CH₂NRCH₂− and −CH₂NRCH₂CH₂CH₂NRCH₂− units, are described. The new macrocycles were obtained in a step-wise manner, utilizing fully protected, i. e. S-alkylated, derivatives of the oxidation-sensitive thiophenols in the cyclisation steps. Reductive cleavage of the macrobicyclic or macrotricyclic intermediates ( 6 , 7 , 11 ) afforded the free thiophenols (H₄ 8 , H₄ 9 , and H₄ 12 ) in preparative yields as their hydrochloride salts. The protected proligands can exist in two conformations, resembling the “cone” and “1,3-alternate” conformations found for the parent calix[4]arenes. The free macrocycles do not show conformational isomerism, but are readily oxidized forming intramolecular disulfide linkages. Preliminary complexation experiments show that these expanded mercaptocalixarenes can serve as supporting ligands for tetranuclear thiolato clusters.     

Covalently assembled resorcin[4]arenes and molecular tweezers: a chiral recognition rationale by NMR

Chiral diamides and tetramidic resorcin[4]arenes deriving from (R,R)-1,2-diaminocyclohexane and (S,S)-1,2-diphenylethylendiamine, and a valine containing resorcin[4]arene have been compared by NMR in the enantiodiscrimination of mandelic acid. The relevance of cooperation between side arms and external surface of resorcin[4]arene core has been ascertained.     

Proximal heteroalkylation of monoalkoxycalix[4]arenes in synthesis of inherently chiral molecules

Proximal heteroalkylation of monoalkyl ethers of calix[4]arenes or p-tert-butylcalix[4]arenes in NaH/CH₃CN or NaOH/DMSO, respectively, was applied for synthesis of inherently chiral calixarenes with ABHH substitution pattern. The introduction by the method of (R)- or (S)-N-(α-phenylethyl)acetamide chiral auxiliary group gives mixtures of diastereomeric derivatives of inherently chiral calixarenes, which were separated by column chromatography. The chiral calixarenes were thoroughly characterized by ¹H, ¹³C NMR, and X-ray diffraction methods.     

Extraction of technetium(vii) by calix[4]arene tetraketones and tetraesters from acidic and basic media

Tetrasubstituted on the lower rim calix[4]arenes, containing carbonyl and ester groups, and existing in a cone conformation are selective and efficient extracting agents for Tc^VII extraction from both acidic and basic solutions.     

Design of Organoiron Macromolecules Based on Upper Rim Functionalized Calix[4]arenes

The versatility of cationic cyclopentadienyliron complexes is demonstrated for the generation of calix[4]arene‐based dendrimers and polymers. Dendrimers were prepared from a branched organoiron calix[4]arene through subsequent reactions of azo dyes and organoiron complexes. The resulting azo dye‐containing metallocalix[4]arenes were soluble in polar organic solvents and displayed λ_max ranging between 430 and 456 nm. Upon addition of various acids, the λ_max shifted to higher wavelengths (513–535 nm). In the solid state and in solution, the azo dye‐containing metallocalix[4]arenes reversibly changed colour in the presence of acid and base, indicating their potential use as acid sensors. Cyclic voltammetric studies showed that the iron centres of the metallocalix[4]arenes were reversibly reduced at E_1/2 = −1.49 V. When non‐branching organoiron‐based calix[4]arene were reacted with dithiols, polymers containing calix[4]arenes either in their side chains or main chains were obtained. The polymers possessed weight average molecular weights between 35 000 and 53 000. The polymers were determined to be thermally stable with backbone decomposition occurring above 500 °C.

     

Design and Synthesis of Novel Amino Acid‐Bearing Macrocyclic Calix[4]Arenes

Abstract

A new family of macrocyclic calix[4]arenes (4a–d) potentially capable of chiral recognition were synthesized by incorporating the chirality inducing moieties, bis α‐amino acylated polyethylene glycols, or tripeptide bis‐Phe Cystine(OMe)₂ to the lower rim.     

p-tert-Butylthiacalix[4]arenes containing guanidinium groups: synthesis and self-assembly into nanoscale aggregates

New p-tert-butylthiacalix[4]arenes with several different substituents at the lower rim have been synthesised. A method for the selective introduction of one or two guanidinium fragments into the structure of p-tert-butylthiacalix[4]arenes has been developed. The 1,3-alternate thiacalix[4]arenes containing guanidinium groups interact with silver nitrate and oxalic acid in methanol with a logK_assoc of about 3.5 and 1:1 stoichiometry, while the macrocycle in the cone conformation interacts with oxalic acid with logK_assoc of 7.4 and 2:1 stoichiometry. The new p-tert-butylthiacalix[4]arenes form nanoscale aggregates with hydrodynamic radii of about 70 nm by self-association and by mediation with silver cations and oxalic acid.     

Calix[4]arenes bearing a tropylium substituent as hosts for organic cations

Four novel calix[4]arenes bearing one cycloheptatrienyl substituent and two calix[4]arenes with one tropylium substituent at the wider rim were synthesized. Cycloheptatrienyl- and tropylium-calixarenes represent two states of a potentially photoswitchable calixarene host. The complexation of selected hosts with organic cations such as quinolinium, ammonium and tropylium ions was studied. It was found that the complexation of organic cations by the tropylium-substituted host was much stronger in CDCl₃ solution than by the related cycloheptatrienyl-host. Aryltropylium ions are bound by tropylium hosts. Accordingly, dimers of the host itself are formed both in CDCl₃ solution and in the gas phase. Because of the intramolecular charge transfer tropyliumcalix[4]arenes are qualified as chromogenic hosts. These undergo two acid-base equilibriums depending on the concentration and the solvent. Electronic Supplementary Material The online version of this article (doi: ) contains supplementary material, which is available to authorized users.     

Mono‐ and Binuclear Rhodium and Platinum Complexes of 1, 3, 5‐Trimethyl‐1, 3, 5‐triaza‐2σ3λ3‐phosphorin‐4, 6‐dionyloxy‐substituted Calix[4]arenes

The reaction behaviour of 1, 3, 5‐triaza‐2σ³λ³‐phosphorin‐4, 6‐dionyloxy‐substituted calix[4]arenes towards mono‐ and binuclear rhodium and platinum complexes was investigated. Special attention was directed to structure and dynamic behaviour of the products in solution and in the solid state. Depending on the molar ratio of the reactands, the reaction of the tetrakis(triazaphosphorindionyloxy)‐substituted calix[4]arene ( 4 ) and its tert‐butyl‐derivative ( 1 ) with [(cod)RhCl]₂ yielded the mono‐ and disubstituted binuclear rhodium complexes 2 , 3 , and 5 . In all cases, a C₂‐symmetrical structure was proved in solution, apparently caused by a fast intramolecular exchange process between cone conformation and 1, 3‐alternating conformation. The X‐ray crystal structure determination of 5 confirmed [(calixarene)RhCl]₂‐coordination through two opposite phosphorus atoms with a P ⃜P separation of 345 pm. The complex displays crystallographic inversion symmetry, and the Rh₂Cl₂ core is thus exactly planar. Reaction of 1 and of the bis(triazaphosphorindionyloxy)‐bis(methoxy)‐substituted tert‐butyl‐calix‐[4]arene ( 7 ) with (cod)Rh(acac) in equimolar ratio and subsequent reaction with HBF₄ led to the expected cationic monorhodium complexes 5 and 8 , involving 1, 3‐alternating P‐Rh‐P‐coordination. The cone conformation in solution was proved by NMR spectroscopy and characteristic values of the ¹J(PRh) coupling constants in the ³¹P‐NMR‐spectra. Reaction of equimolar amounts of 4 with (cod)Rh(acac) or (nbd)Rh(acac) led, by substitution of the labile coordinated acetylacetonato and after addition of HBF₄, to the corresponding mononuclear cationic complexes 9 and 10 . Only two of the four phosphorus atoms in 9 and 10 are coordinated to the central metal atom. Displacement of either cycloocta‐1, 5‐diene or norbornadiene was not observed. For both compounds, the cone conformation was proved by NMR spectroscopy. Reaction of 4 with (cod)PtCl₂ led to the PtCl₂‐complex ( 11 ). As for all compounds mentioned above, only two phosphorus atoms of the ligand coordinate to platinum, while two phosphorus atoms remain uncoordinated (proved by δ³¹P and characteristic values of ¹J(PPt)). NMR‐spectroscopic evidence was found for the existence of the cone conformation in the cis‐configuration of 11 .     

Synthesis of （p-Formylphenyl）azo Calix[4]arenes

Five novel azo calix[4]arenes were reported. The p-aminobenzaldehyde was diazotized with sodium nitrite in aqueous hydrochloride solution. Mono-, bis-, tris- and tetrakis(p-formylphenyl)azo calix[4]arenes (including proximal and distal isomers) were obtained respectively by diazo-coupling in different molar ratio to calix[4]arene(1) under pH=7.5--8.5 at 0-5℃. All (p-formylphenyl)azo calix[4]arenes were characterized by ^1H NMR, ^13C NMR, IR, MS (ESIMS) spectroscopies and elemental analysis.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.