UHPLC–MS/MS method for the determination of bisphenol A and its chlorinated derivatives,bisphenol S,parabens, and benzophenones in human urine samples

In the present work, a new method based on a sample treatment by dispersive liquid–liquid microextraction (DLLME) for the extraction of six bisphenols (bisphenol A, bisphenol S, and monochloro-, dichloro-, trichloro-, and tetrachlorobisphenol A), four parabens (methyl-, ethyl-, propyl-, and butylparaben), and six benzophenones (benzophenone-1, benzophenone-2, benzophenone-3, benzophenone-6, benzophenone-8, and 4-hydroxybenzophenone) in human urine samples, followed by ultrahigh-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) analysis, is validated. An enzymatic treatment allows determining the total content of the target EDCs. The extraction parameters were accurately optimized using multivariate optimization strategies. Ethylparaben ring-¹³C₆, benzophenone-d₁₀, and bisphenol A-d₁₆ were used as surrogates. Limits of quantification ranging from 0.1 to 0.6 ng mL^?1 and interday variabilities (evaluated as relative standard deviations) from 2.0 to 13.8 % were obtained. The method was validated using matrix-matched standard calibration followed by a recovery assay with spiked samples. Recovery rates ranged from 94 to 106 %. A good linearity, for concentrations up to 300 ng mL^?1 for parabens and 40 ng mL^?1 for benzophenones and bisphenols, was also obtained. The method was satisfactorily applied for the determination of target compounds in human urine samples from 20 randomly selected individuals.     

In-vitro oxidation of bisphenol A: Is bisphenol A catechol a suitable biomarker for human exposure to bisphenol A?

The extensive use of bisphenol A (BPA) in the manufacture of consumer products results in widespread human exposure to the chemical. In the body, BPA undergoes first-pass metabolism to form BPA glucuronide, considered to be a major BPA byproduct. Concentrations of total (free plus conjugated) urinary species of BPA are used to assess human exposure to BPA. However, because BPA can be present in numerous consumer and household products, potential contamination with parent BPA during collection and handling may pose a challenge when measuring BPA in such biological samples as blood or urine. In this study we investigated the in-vitro phase I metabolism of BPA in rat and human liver microsomes by using on-line solid-phase extraction–high-performance liquid chromatography–tandem mass spectrometry to identify phase I metabolites (e.g., BPA oxidation products) that could be used as potential alternative biomarkers of BPA exposure. We unambiguously identified 5-hydroxy BPA (BPA catechol) as an in-vitro oxidative metabolite of BPA, but human microsomes oxidized only about 10% of BPA to BPA catechol. We evaluated the usefulness of BPA catechol as a potential biomarker of human exposure to BPA by measuring total concentrations of BPA catechol and BPA in 20 urine samples. We detected BPA catechol at much lower concentrations and frequency than those of BPA. Furthermore, we found that free BPA catechol was rather unstable in urine, which highlights the importance of sampling techniques to adequate interpretation of biomonitoring data. Together, these findings suggest that BPA catechol may not be a suitable biomarker of environmental exposure to BPA, but could be used to confirm BPA exposure in special populations or in situations when urine specimens were potentially contaminated with BPA.     

Synthetic polymers adsorbing bisphenol A and its analogues prepared by covalent molecular imprinting using bisphenol A dimethacrylate as a template molecule

Synthetic polymers which can adsorb bisphenol A (BPA) and related compounds were prepared by a covalent molecular imprinting technique. BPA dimethacrylate, used as template molecule, was polymerized with a crosslinker, triethylene glycol dimethacrylate (TEGDMA) or trimethylol propane trimethacrylate (TRIM). After the polymerization treatment with dilute NaOH was used to cleave BPA from the polymers. For high recovery of BPA with low polymer matrix degradation, the hydrolysis conditions were determined to be treatment with 1.0 mol L^–1 NaOH for 48 h. The binding sites generated by the hydrolysis were evaluated by determination of the retentivity of BPA, BPA analogues, and other endocrine disruptors. The polymers strongly adsorbed compounds with two hydroxyl groups at the 4,4-positions. Generally the TEGDMA-based polymers had stronger affinity than the TRIM-based polymers, although the TRIM-based polymer adsorbed steroidal hormones with two hydroxyl groups, for example 17-estradiol and 17-estradiol, more strongly than the TEGDMA-based polymer, meaning that the crosslinkers affected the properties of the binding sites and, depending upon the target molecules, suitable crosslinkers should be chosen in this system.     

Depolymerization of Poly（bisphenol A carbonate） in Subcritical and Supercritical Toluene

The depolymerization of poly(bisphenol A carbonate)(PC) in subcritical and supercritical toluene was studied. The experimental parameters, which influence the depolymerization reaction such as temperature (570-633 K), pressure (4.0-7.0 MPa), reaction time (5-60 min), and toluene to PC weight ratio (3.0-11.0), were investigated, and the reaction products were determined by GC, GC/MS and FT-IR spectrometer. It was found that the main product of the depolymerization reaction was bisphenol A(BPA). BPA accounted for over 55.7% of the depolymerization products at reaction temperature 613 K, pressure 5.0-6.0 MPa, reaction time 15 min and toluene/PC weight ratio of around 7.0.     

A high concentration of genistein down-regulates activin A, Smad3 and other TGF-β pathway genes in human uterine leiomyoma cells

Previously, we found that high doses of genistein show an inhibitory effect on uterine leiomyoma (UtLM) cell proliferation. In this study, using microarray analysis and Ingenuity Pathways Analysis™, we identified genes (up- or down-regulated, ≥ 1.5 fold, P ≤ 0.001), functions and signaling pathways that were altered following treatment with an inhibitory concentration of genistein (50 µg/ml) in UtLM cells. Downregulation of TGF-β signaling pathway genes, activin A, activin B, Smad3, TGF-β2 and genes related to cell cycle regulation, with the exception of the upregulation of the CDK inhibitor P15, were identified and validated by real-time RT-PCR studies. Western blot analysis further demonstrated decreased protein expression of activin A and Smad3 in genistein-treated UtLM cells. Moreover, we found that activin A stimulated the growth of UtLM cells, and the inhibitory effect of genistein was partially abrogated in the presence of activin A. Overexpression of activin A and Smad3 were found in tissue samples of leiomyoma compared to matched myometrium, supporting the contribution of activin A and Smad3 in promoting the growth of UtLM cells. Taken together, these results suggest that down-regulation of activin A and Smad3, both members of the TGF-β pathway, may offer a mechanistic explanation for the inhibitory effect of a high-dose of genistein on UtLM cells, and might be potential therapeutic targets for treatment of clinical cases of uterine leiomyomas.     

On-line solid-phase microextraction of triclosan, bisphenol A, chlorophenols, and selected pharmaceuticals in environmental water samples by high-performance liquid chromatography–ultraviolet detection

A method using on-line solid-phase microextraction (SPME) on a carbowax-templated fiber followed by liquid chromatography (LC) with ultraviolet (UV) detection was developed for the determination of triclosan in environmental water samples. Along with triclosan, other selected phenolic compounds, bisphenol A, and acidic pharmaceuticals were studied. Previous SPME/LC or stir-bar sorptive extraction/LC-UV for polar analytes showed lack of sensitivity. In this study, the calculated octanol–water distribution coefficient (log D) values of the target analytes at different pH values were used to estimate polarity of the analytes. The lack of sensitivity observed in earlier studies is identified as a lack of desorption by strong polar–polar interactions between analyte and solid-phase. Calculated log D values were useful to understand or predict the interaction between analyte and solid phase. Under the optimized conditions, the method detection limit of selected analytes by using on-line SPME-LC-UV method ranged from 5 to 33 ng?L^?1, except for very polar 3-chlorophenol and 2,4-dichlorophenol which was obscured in wastewater samples by an interfering substance. This level of detection represented a remarkable improvement over the conventional existing methods. The on-line SPME-LC-UV method, which did not require derivatization of analytes, was applied to the determination of TCS including phenolic compounds and acidic pharmaceuticals in tap water and river water and municipal wastewater samples.

Determination of bisphenol A and bisphenol B in canned seafood combining QuEChERS extraction with dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry

A new simple and reliable method combining an acetonitrile partitioning extractive procedure followed by dispersive solid-phase cleanup (QuEChERS) with dispersive liquid–liquid microextraction (DLLME) and further gas chromatography mass spectrometry analysis was developed for the simultaneous determination of bisphenol A (BPA) and bisphenol B (BPB) in canned seafood samples. Besides the great enrichment factor provided, the final DLLME extractive step was designed in order to allow the simultaneous acetylation of the compounds required for their gas chromatographic analysis. Tetrachloroethylene was used as extractive solvent, while the acetonitrile extract obtained from QuEChERS was used as dispersive solvent, and anhydride acetic as derivatizing reagent. The main factors influencing QuEChERS and DLLME efficiency including nature of QuEChERS dispersive-SPE sorbents, amount of DLLME extractive and dispersive solvents and nature and amount of derivatizing reagent were evaluated. DLLME procedure provides an effective enrichment of the extract, allowing the required sensitivity even using a single quadropole MS as detector. The optimized method showed to be accurate (>68?% recovery), reproducible (<21?% relative standard deviation) and sensitive for the target analytes (method detection limits of 0.2?μg/kg for BPA and 0.4?μg/kg for BPB). The screening of several canned seafood samples commercialized in Portugal (total?=?47) revealed the presence of BPA in more than 83?% of the samples with levels ranging from 1.0 to 99.9?μg/kg, while BPB was found in only one sample at a level of 21.8?μg/kg.     

Oxomolybdenum(VI) complexes with glycine bisphenol [O,N,O,O′] ligand: synthesis and catalytic studies

The oxomolybdenum(VI) complex [MoOCl(L)] with a tetradentate glycine bisphenol ligand (H₃L) was prepared by reaction of [MoO₂Cl₂(DMSO)₂] with a ligand precursor in hot toluene. The product was isolated in moderate yield as separable cis and trans isomers along with the third minor component, [MoO₂(HL)]. The solid-state structure of trans-[MoOCl(L)] was determined by X-ray diffraction. The ligand has tetradentate coordination through three oxygens and one nitrogen, which is located trans to the terminal oxo whereas the sixth coordination site is occupied by a chloride. Both cis and trans isomers of [MoOCl(L)] are active catalysts for epoxidation of cis-cyclooctene and sulfoxidation of tolyl methyl sulfide. The cis isomer gave higher activity in epoxidation and sulfoxidation reactions at room temperature than the trans isomer but they performed identically at 50?°C.     

Total synthesis of infectopyrone,aplysiopsenes A–C,ent-aplysiopsene D,phomapyrones A and D, 8,9-dehydroxylarone,and nectriapyrone

The total synthesis of the 2-pyrone natural products nectriapyrone, aplysiopsenes A–C, ent-aplysiopsene D, phomapyrones A and D, and of 8,9-dehydroxylarone were achieved by Wittig olefination starting with vermopyrone. Infectopyrone was synthesized by Horner–Wadsworth–Emmons reaction starting with phomapyrone D. Racemic phomapyrone C methyl ether was obtained by hydrogenation of nectriapyrone. The total syntheses were achieved starting from commercially available 3,5-heptanedione and led to the desired natural products in 18–46% over 5–6 steps, whereupon all five-step syntheses were carried out with a single chromatographic workup. The total synthesis of infectopyrone, aplysiopsenes A–D, of phomapyrones A and D, and of 8,9-dehydroxylarone were achieved for the first time, giving unambiguous proof for the proposed structures of these natural products.     

CuS–MWCNT based electrochemical sensor for sensitive detection of bisphenol A

The rapid and simple detection of bisphenol A is very important for the safety and reproduction of organisms. Here, a sensitive and reliable electrochemical sensor was established for bisphenol A detection based on the high amplification effect of copper sulfide-multi-walled carbon nanotube (CuS–MWCNT) nanocomposites. The flower-like CuS–MWCNT were successfully synthesized by a simple hydrothermal method accompanied by polyvinylpyrrolidone (PVP). Compared with bare glassy carbon electrode (GCE), CuS–MWCNT modified GCE could amplify the electrochemical signals in about ten times, which was attributed to the synergistic effect of CuS and MWCNT. The MWCNT could increase the specific surface area of electrodes and improve the electrode activity. The integration of CuS could further enhance the electrode conductivity as well as accelerate the electron transfer rate. Raman spectra and transmission electron microscope (TEM) were used to characterize the successful fabrication of CuS–MWCNT nanocomposites and its uniform and monodispersed morphology. Under optimizing conditions, the oxidation currents of bisphenol A via the differential pulse voltammetric (DPV) showed a good linear relationship with its concentration in a wide range of 0.5–100 μM, with a detection limit of 50 nM. This electrochemical sensor of bisphenol A provided a convenient and economical platform with high sensitivity and reproducibility, which had great potential in environmental monitoring.     

Is the bisphenol A biradical formed in the pyrolysis of polycarbonate?

An unknown species has been detected in the analysis of the products in a pyrolysis of polycarbonate using Li(+) ion-attachment mass spectrometry (IAMS). The mass spectra exhibited a Li(+) adduct peak at m/z 233 that was tentatively assigned to bisphenol A (BPA) biradical. Experimentally, this assignment was supported by the observation that the production rate increased under an inert nitrogen atmosphere. To further confirm the assignment, the stability of the BPA biradical to intramolecular rearrangement reactions as well as unimolecular decomposition has been analyzed via density functional theory calculations [B3LYP/6-311+G(3df,2p)]. The results show that the bisphenol A biradical is an open-shell biradical singlet that is stable to unimolecular decomposition. Although some of the proposed intramolecular rearrangement products have lower energies than those of the BPA diradical, these pathways have large reaction barriers and the kinetic lifetime of the radical is expected to be of the order of hours under the conditions of the experiment. The calculations also reveal that the bisphenol A diradical has large Li(+) affinities supporting the fact that these Li(+) complexes could be detected in the Li(+) ion attachment mass spectrometry. On the basis of these results the Li(+) adduct peak at m/z 233 detected in the pyrolysis of polycarbonate is assigned to the bisphenol A biradical.     

A multianalyte ELISA for immunochemical screening of sulfonamide,fluoroquinolone and ß-lactam antibiotics in milk samples using class-selective bioreceptors

A multianalyte ELISA has been developed for the simultaneous determination of the most frequently used antibiotic families in the veterinary field following the typical planar microarray configuration, where the identity of the target analyte is encoded by its location in the detection platform (Master et al. in Drug Discovery Today 11:1007-1011, 2006). To accomplish this aim, two individual enzyme-linked immunosorbent assays for sulfonamide and fluoroquinolone antibiotics and an enzyme-linked receptor assay for ss-lactam antibiotics have been combined. The strategy uses microplates coated with the corresponding haptenized proteins in specific sections of the microplate. The samples are mixed with a cocktail containing the bioreagents, and distributed in the wells of the microplate. Identification of the antibiotic present in a particular sample is consequently accomplished by detecting a positive response on the corresponding microplate section. Since the bioreceptors used show a wide recognition of the congeners of each antibiotic family, the multianalyte method is able to detect more than 25 different antibiotics from the three most important antibiotic families. The detectability reached in full-fat milk samples is below the European maximum residue limits. The accuracy and reliability of this multiplexed bioanalytical method have been demonstrated by analyzing blind spiked samples.     

Synthesis and mesomorphic properties of new liquid crystalline compounds with ß-hydroxy-, ß-chloroketone and a,ß-unsaturated ketone moieties in the terminal chains

The syntheses of new liquid crystalline compounds containing β-hydroxy-, β-chloroketone and α,β-unsaturated ketone moieties are described. The key intermediate 1-(4-hydroxyphenyl)-3-hydroxyoctan-1-one was obtained by the hydrogenolysis of the heterocycle in 3-(4-hydroxyphenyl)-5-pentyl-2-isoxazoline. Dehydratation of the intermediate β-hydroxyketone led to 1-(4-hydroxyphenyl)-oct-2-en-1-one. Reaction of 1-(4-hydroxyphenyl)-3-hydroxyoctan-1-one with hydrochloric acid yielded 1-(4-hydroxyphenyl)-3-chlorooctan-1-one. The target liquid crystalline compounds were synthesized by the esterification of these phenols with corresponding acids. The relationships between the moiety type in the terminal chain and the liquid crystalline properties are discussed.     

Quantification of urinary conjugates of bisphenol A, 2,5-dichlorophenol,and 2-hydroxy-4-methoxybenzophenone in humans by online solid phase extraction–high performance liquid chromatography–tandem mass spectrometry

Urinary concentrations of phenols or their metabolites have been used as biomarkers to assess the prevalence of exposure to these compounds in the general population. Total urinary concentrations, which include both free and conjugated (glucuronide and sulfated) forms of the compounds, are usually reported. From a toxicologic standpoint, the relative concentrations of the free species compared with their conjugated analogs can be important because conjugation may reduce the potential biologic activity of the phenols. In this study, we determined the percentage of glucuronide and sulfate conjugates of three phenolic compounds, bisphenol A (BPA), 2,5-dichlorophenol (2,5-DCP), and 2-hydroxy-4-methoxybenzophenone (benzophenone-3, BP-3) in 30 urine samples collected between 2000 and 2004 from a demographically diverse group of anonymous adult volunteers. We used a sensitive on-line solid phase extraction–isotope dilution–high performance liquid chromatography–tandem mass spectrometry method. These three phenols were detected frequently in the urine samples tested. Only small percentages of the compounds (9.5% for BPA, and 3% for 2,5-DCP and BP-3) were excreted in their free form. The percentage of the sulfate conjugate was about twice that of the free compound. The glucuronide conjugate was the major metabolite, representing 69.5% (BPA), 89% (2,5-DCP), and 84.6% (BP-3) of the total amount excreted in urine. These results are in agreement with those reported before which suggested that BPA-glucuronide was an important BPA urinary metabolite in humans. To our knowledge, this is the first study describing the distribution of urinary conjugates of BP-3 and 2,5-DCP in humans.     

A Novel, Simple and Efficient Synthesis of Ferrocenyl Enones and Alkynols

Propargylic alcohols are versatile precursors to many organic molecules including natural products and pharmaceutical compounds.[1] In our continuing interest in the development of practical methods for synthesis of ferrocene derivatives, we decided to investigate the efficiencies of ferrocenylacetylene addition to aromatic aldehydes under t-BuOKcatalyzed condition.[2] Interestingly, we found that the usually reliable coupling reaction between terminal alkyne of type 1 and aromatic aldehydes of type 2 does not furnish the expected propargylic alcohols, but that the isomeric aryl enones 3are found in high yield and very short reaction time (10～20 min). This provided a promising protocol for preparation of ferrocenyl chalcones in a practical, economical and mild sense compared with the traditional method. To the best of our knowledge, this unusual reaction was first observed for the addition of ferrocenylacetylene to aldehyde in a base-catalyzed manner (Eq. 1).     

Total Syntheses of Kopsaporine,Kopsinol and Kopsiloscine A

Kopsia alkaloids represent a complex class of natural products bearing a polycyclic ring system with two or three consecutive quaternary carbon centers. In this article, we report the first total synthesis of Kopsaporine related alkaloids. Features of our structure-unit-based strategy are an intramolecular Pummerer rearrangement induced nucleophilic cyclization/aza-Prins cyclization to construct the highly functional hexahydrocarbazole skeleton, an olefin migration vinylogous alkylation to establish the C20 all-carbon quaternary center, an iridium complex mediated radical addition to fuse the aspidofractine framework, an unprecedented IBX oxidation to introduce the α-hydroxyketone moiety, and a bioinspired retro-Aldol/Aldol reaction to convert kopsaporine to kopsiloscine A.     

Dispersive liquid–liquid microextraction combined with high-performance liquid chromatography-UV detection as a very simple,rapid and sensitive method for the determination of bisphenol A in water samples

Dispersive liquid–liquid microextraction (DLLME) coupled with high-performance liquid chromatography (HPLC)-UV detection was applied for the extraction and determination of bisphenol A (BPA) in water samples. An appropriate mixture of acetone (disperser solvent) and chloroform (extraction solvent) was injected rapidly into a water sample containing BPA. After extraction, sedimented phase was analyzed by HPLC-UV. Under the optimum conditions (extractant solvent: 142 μL of chloroform, disperser solvent: 2.0 mL of acetone, and without salt addition), the calibration graph was linear in the range of 0.5–100 μg L⁻¹ with the detection limit of 0.07 μg L⁻¹ for BPA. The relative standard deviation (RSD, n = 5) for the extraction and determination of 100 μg L⁻¹ of BPA in the aqueous samples was 6.0%. The results showed that DLLME is a very simple, rapid, sensitive and efficient analytical method for the determination of trace amount of BPA in water samples and suitable results were obtained.     

A,D-Oligomethylenic capping of α- and β-cyclodextrins

α- and β-cyclodextrins have easily been converted into basket molecules, the handle being an oligomethylenic chain bridging A and D positions on the primary rim. The size of the handle influences the complexing properties of these cyclodextrins. To cite this article: T. Lecourt et al., C. R. Chimie 6 (2003) 000–000.     

TiCl4, Dioxane—A Facile and Efficient System for De-O-Benzylation,De-O-Allylation,and De-O-Xylylation of Phenolic Ethers

Abstract

Simultaneous de-O-xylylation and reductive coupling was observed when 1 equiv. of the dialdehyde 2a/2b was treated with 5 equiv. of each TiCl₄ and Zinc which lead to the development of TiCl₄ in dioxane as a new system for the facile deprotection of phenolic ethers 4a–4d, 5a–5d, and 6a–6c.