Preparation of luminescent ZnS:Cu nanoparticles for the functionalization of transparent acrylate polymers

Highly luminescent ZnS:Cu nanoparticles were synthesized in a coprecipitation route using aqueous salt solutions and thiopropionic acid as stabilizer. The method yields a stable, transparent particle dispersion in water and allows for a good control over particle size in the range of 3-10 nm as determined by dynamic light scattering, small angle X-ray scattering and transmission electron microscopy. Strong luminescence of the nanoparticles was observed under UV-excitation and emission colors could be adjusted in the range of blue to green by varying the Cu-doping concentration. The phase transfer of the ZnS:Cu nanoparticles into non-polar solvents using octylamine was used for a hydrophobic surface functionalization. The hydrophobic particles were used for the fabrication of transparent bulk nanocomposites via in situ-polymerization of dispersions in laurylacrylate. A high transparency of the composite materials, and the luminescence of the ZnS:Cu nanoparticles is retained during the phase transfer and the polymerization process allowing for the integration of a new luminescent functionality into the polymer material.     

Fabrication of titanium dioxide nanofibers containing hydroxyapatite nanoparticles

In the present study, we introduce titanium dioxide (TiO₂) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals has been employed to synthesize HAp NPs through calcination of bovine bones. Typically, a colloidal gel consisting of titanium isopropoxide/HAp was prepared to produce nanofibers embedded with solid NPs by electrospinning process. The SEM results confirmed well oriented nanofibers and good dispersion of HAp NPs over the nanofibers. XRD results demonstrated well crystalline feature of both TiO₂ and HAp. Physiochemical aspects of prepared nanofibers were characterized for TEM and TEM-EDS which confirmed nanofibers were well oriented and had good dispersion of HAp NPs. Accordingly, these results strongly recommend the use of obtained nanofiber mats as a future candidate for hard tissue engineering applications.     

Microstructure and photocatalytic activity of titanium dioxide nanoparticles

Titanium dioxide nanoparticles with an average diameter of about 10 nm are fabricated using a sintering method. The degradation of methyl orange indicates that the photocatalytic efficiency is greatly enhanced, which is measured to be 62.81%. Transmission electron microscopy is used to investigate the microstructure of TiO 2 nanoparticles in order to correlate their photocatalytic properties. High-resolution transmission electron microscopy examinations show that all the nanoparticles belong to the anatase phase, and pure edge dislocations exist in some nanoparticles. The great enhancement of photocatalytic efficiency is attributed to two factors, the quantum size effect and the surface defects in the nanoparticles.     

Surface functionalization of silica-coated magnetic nanoparticles for covalent attachment of cholesterol oxidase

A systematic approach towards the fabrication of highly functionalized silica shell magnetic nanoparticles, presently used for enzyme immobilization, is herein fully presented. The synthesis of bare maghemite (γ-Fe₂O₃) nanoparticles was accomplished by thermal co-precipitation of iron ions in ammonia alkaline solution at harsh reaction conditions, respectively. Primary surface engineering of maghemite nanoparticles was successfully performed by the proper deposition of silica onto nanoparticles surface under strictly regulated reaction conditions. Next, the secondary surface functionalization of the particles was achieved by coating the particles with organosilane followed by glutaraldehyde activation in order to enhance protein immobilization. Covalent immobilization of cholesterol oxidase was attempted afterwards. The structural and magnetic properties of magnetic silica nanocomposites were characterized by TEM and vibrating sample magnetometer (VSM) instruments. X-ray diffraction measurements confirmed the spinel structure and average size of uncoated maghemite nanoparticles to be around 20 nm in diameter. SEM-EDS spectra indicated a strong signal for Si, implying the coating procedure of silica onto the particles surface to be successfully accomplished. Fourier transform infrared (FT-IR) spectra analysis confirmed the binding of amino silane molecules onto the surface of the maghemite nanoparticles mediated Si-O-Si chemical bonds. Compared to the free enzyme, the covalently bound cholesterol oxidase retained 50% of its activity. Binding of enzyme onto chemically modified magnetic nanoparticles via glutaraldehyde activation is a promising method for developing biosensing components in biomedicine.     

Effect of titanium dioxide nanoparticles on polymer network formation

This work presents a study of the effect of nanoparticles on polymer composites to develop a powerful polymer dispersed liquid crystal materials. Tri propylene glycol diarcrylate/titanium dioxide nanocomposites were produced at various titanium dioxide fractions ranging between 0 and 1?wt%, through ultraviolet curing technique during 30?min. Different technics such as polarized optical microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermal gravimetric analysis were used to characterize the samples. A dynamic swelling of polymer network was also investigated. The evolution of the acrylic double-bond conversion shows a decrease in the absorption intensity at 1637?cm^?1. It is noted that the conversion rate decreases from 0.1 to 1?wt% of titanium dioxide nanoparticles. An increase in glass transition temperature is observed by differential scanning calorimetry. The thermogravimetric analysis results reveal a highly improved thermal stability upon the addition of the reinforcing phase. The follow of kinetics swelling of polymer network shows a decrease of the swell ratio with the inclusion of titanium dioxide nanoparticles.     

Optical investigation on sulfur-doping effects in titanium dioxide nanoparticles

The sulfur-doping (S-doping) effects in TiO₂ nanoparticles are investigated by means of Raman spectroscopy and UV–Vis spectroscopy with different S-doping levels (10 and 50%). Raman spectra indicate that the rutile and anatase phases dominate for the low S-doped (10%) and high S-doped (50%) TiO₂ nanoparticles, respectively. The variation of phase with different S-doping levels has been ascribed to the different S-doping processes into TiO₂ nanoparticles. In addition, an extra absorption band is observed in both the S-doped TiO₂ nanoparticles. With increasing S-doping level from 10 to 50%, the extra absorption band shows a blue-shift from 470 to 445 nm, which may be ascribed to the variation of phase from rutile to anatase for TiO₂.     

Electrochemical capacitance from carbon nanotubes decorated with titanium dioxide nanoparticles in acid electrolyte

The electrochemical activity of an electrode of carbon nanotubes (CNTs) attached with TiO₂ nanoparticles was investigated. A chemical-wet impregnation was used to deposit different TiO₂ particle densities onto the CNT surface, which was chemically oxidized by nitric acid. Transmission electron microscopy showed that each TiO₂ nanoparticle has an average size of 30-50 nm. Nitrogen physisorption measurement indicated that the porosity of CNTs is partially hindered by some titania aggregations at high surface coverage. Cyclic voltammetry measurements in 1 M H₂SO₄ showed that (i) an obvious redox peak can be found after the introduction of TiO₂ and (ii) the specific peak current is proportional to the TiO₂ loading. This enhancement of electrochemical activity was attributed to the fact that TiO₂ particles act as a redox site for the improvement of energy storage. According to our calculation, the electrochemical capacitance of TiO₂ nanocatalysts in acid electrolyte was estimated to be 180 F/g. Charge-discharge cycling demonstrated that the TiO₂-CNT composite electrode maintains stable cycleability of over 200 cycles.     

Targeted sonocatalytic cancer cell injury using avidin-conjugated titanium dioxide nanoparticles

In this study, we applied sonodynamic therapy to cancer cells based on the delivery of titanium dioxide (TiO₂) nanoparticles (NPs) modified with avidin protein, which preferentially discriminated cancerous cells from healthy cells. Subsequently, hydroxyl radicals were generated from the TiO₂ NPs after activation by external ultrasound irradiation (TiO₂/US treatment). Although 30% of the normal breast cells (human mammary epithelial cells) exhibited the uptake of avidin-modified TiO₂ NPs, over 80% of the breast cancer cells (MCF-7) exhibited the uptake of avidin-TiO₂ NPs. Next the effect of the TiO₂/US treatment on MCF-7 cell growth was examined for up to 96 h after 1-MHz ultrasound was applied (0.1 W/cm², 30 s) to cells that incorporated the TiO₂ NPs. No apparent cell injury was observed until 24 h after the treatment, but the viable cell concentration declined to 68% compared with the control at 96 h.     

Steady state and time resolved laser-induced fluorescence of garlic plants treated with titanium dioxide nanoparticles

The study involves investigation of the effect of the interaction of titanium dioxide nanoparticles with garlic plant by spectroscopy techniques. For this, garlic plants have been grown in the laboratory under controlled conditions of light flux, temperature, humidity, and nutrient media. The growth and biomass parameters in terms of shoot length, fresh, and dry mass are found to increase upon the treatment of titanium dioxide nanoparticles while a reduction is observed in the root length of the garlic plants. The steady state laser-induced fluorescence, time resolved laser-induced fluorescence, and ultraviolet visible spectra of the control and titanium dioxide nanoparticles-treated plants have been acquired. The curve fitting data reveal that titanium dioxide nanoparticles decrease the intensity and fluorescence intensity ratio of red and far red chlorophyll fluorescence bands indicating increase in the photosynthetic activity and chlorophyll content. The evaluation of life time of the excited chlorophyll molecule shows that life time is effected by the treatment of the titanium dioxide nanoparticles. The results pertaining to ultraviolet visible measurement indicate increase in the concentration of chlorophyll a, chlorophyll b, total chlorophyll, carotenoid, and quercetin in the leaves of garlic plants treated with titanium dioxide nanoparticles.     

Optimized method of dispersion of titanium dioxide nanoparticles for evaluation of safety aspects in cosmetics

Nanoparticles agglomerate when in contact with biological solutions, depending on the solutions’ nature. The agglomeration state will directly influence cellular response, since free nanoparticles are prone to interact with cells and get absorbed into them. In sunscreens, titanium dioxide nanoparticles (TiO₂-NPs) form mainly aggregates between 30 and 150 nm. Until now, no toxicological study with skin cells has reached this range of size distribution. Therefore, in order to reliably evaluate their safety, it is essential to prepare suspensions with reproducibility, irrespective of the biological solution used, representing the above particle size distribution range of NPs (30–150 nm) found on sunscreens. Thus, the aim of this study was to develop a unique protocol of TiO₂ dispersion, combining these features after dilution in different skin cell culture media, for in vitro tests. This new protocol was based on physicochemical characteristics of TiO₂, which led to the choice of the optimal pH condition for ultrasonication. The next step consisted of stabilization of protein capping with acidified bovine serum albumin, followed by an adjustment of pH to 7.0. At each step, the solutions were analyzed by dynamic light scattering and transmission electron microscopy. The final concentration of NPs was determined by inductively coupled plasma-optical emission spectroscopy. Finally, when diluted in dulbecco’s modified eagle medium, melanocytes growth medium, or keratinocytes growth medium, TiO₂–NPs displayed a highly reproducible size distribution, within the desired size range and without significant differences among the media. Together, these results demonstrate the consistency achieved by this new methodology and its suitability for in vitro tests involving skin cell cultures.     

Surface functionalisation of polymer nanofibres by sputter coating of titanium dioxide

The surface properties of nanofibres are of importance in various applications. In this work, electrospun polyamide nanofibres were used as substrates for creating functional nanostructures on the nanofibre surfaces. A RF magnetron sputter coating was used to deposit the functional layer of titanium dioxide (TiO₂) onto the nanofibres. Atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and environmental scanning electron microscopy (ESEM) were employed to study the topography, grain structure and wetting of the nanofibre surfaces, respectively. The AFM results indicated a significant difference in the morphology of the nanofibres before and after the TiO₂ sputter coating. The XRD analysis showed the amorphous structures of the TiO₂ deposition layer. XPS spectra reflected the chemical features of the deposited nanostructures. The ESEM observation revealed that the surface wettability of TiO₂ sputter coated nanofibres was significantly improved after UV irradiation.     

Fabrication of optically transparent chitin nanocomposites

This paper demonstrates the preparation of chitin nanofibers from crab shells using a simple mechanical treatment. The nanofibers are small enough to retain the transparency of neat acrylic resin. Possessing hydroxyl and amine/N-acetyl functionalities, water suspension of chitin nanofibers was vacuum-filtered 9 times faster than cellulose nanofibers to prepare a nanofiber sheet of 90 mm in diameter. This is a prominent advantage of chitin nanofibers over cellulose nanofibers in terms of commercial application. Interestingly, chitin acrylic resin films exhibited much higher transparency than cellulose acrylic resin films owing to the close affinity between less hydrophilic chitin and hydrophobic resin. Furthermore, the incorporation of chitin nanofibers contributes to the significant improvement of the thermal expansion and mechanical properties of the neat acrylic resin. The properties of high light transmittance and low thermal expansion make chitin nanocomposites promising candidates for the substrate in a continuous roll-to-roll process in the manufacturing of various optoelectronic devices such as flat panel displays, bendable displays, and solar cells.     

Acute effects of sono-activated photocatalytic titanium dioxide nanoparticles on oral squamous cell carcinoma

Sonodynamic therapy (SDT) is a new treatment modality using ultrasound to activate certain chemical sensitizers for cancer therapy. In this study, effects of high intensity focused ultrasound (HIFU) combined with photocatalytic titanium dioxide (TiO₂) nanoparticles on human oral squamous cell line HSC-2 were investigated. Viability of HSC-2 cells after 0, 0.1, 1, or 3 s of HIFU irradiation with 20, 32, 55 and 73 W cm⁻² intensities in the presence or absence of TiO₂ was measured immediately after the exposures in vitro. Immediate effects of HIFU (3 s, 73 W cm⁻²) combined with TiO₂ on solid tumors were also examined by histological study. Cytotoxic effect of HIFU + TiO₂ in vitro was significantly higher than that of TiO₂ or HIFU alone with the tendency to increase for higher HIFU intensity, duration, and TiO₂ concentration in the suspension. In vivo results showed significant necrosis and tissue damage in HIFU and HIFU + TiO₂ treated samples. However, penetration of TiO₂ nanoparticles into the cell cytoplasm was only observed in HIFU + TiO₂ treated tissues. In this study, our findings provide a rational basis for the development of an effective HIFU based sonodynamic activation method. This approach offers an attractive non-invasive therapy technique for oral cancer in future.     

Synthesis and surface functionalization of silica nanoparticles for nanomedicine

There are a wide variety of silica nanoformulations being investigated for biomedical applications. Silica nanoparticles can be produced using a wide variety of synthetic techniques with precise control over their physical and chemical characteristics. Inorganic nanoformulations are often criticized or neglected for their poor tolerance; however, extensive studies into silica nanoparticle biodistributions and toxicology have shown that silica nanoparticles may be well tolerated, and in some case are excreted or are biodegradable. Robust synthetic techniques have allowed silica nanoparticles to be developed for applications such as biomedical imaging contrast agents, ablative therapy sensitizers, and drug delivery vehicles. This review explores the synthetic techniques used to create and modify an assortment of silica nanoformulations, as well as several of the diagnostic and therapeutic applications.     

Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites

Pulp fibers were fibrillated uniformly into nano-sized fibers using a grinder with a specially designed set of grinding disks. To investigate the effect of the fibrillation through the grinder on the physical properties of the composites, dissolved pulp fibers were subjected to various passes through the grinder, and the resulting fibrillated pulp fibers were used to make fibrillated pulp fibers/acrylic resin composites. Scanning electron microscopy observations showed that at above five passes, the structure of the fibrillated pulp fibers did not change significantly. The light transmittances of the composites were increased to 80% up to five passes through the grinder, and did not change after further passes. However, the tensile test and thermal expansion analysis indicated that a degradation of the fibrillated pulp occurred during the grinding treatment. To evaluate the fiber degradation, the degree of crystallinity and degree of polymerization of cellulose were measured. Both decreased as the number of passes through the grinder increased. In addition, to reduce the thermal expansion of composites, the fibrillated pulp fibers were additionally treated by sulfuric acid. The thermal expansion of composites was decreased, because the amorphous region of cellulose was removed. PACS 81.05.Lg; 81.05.Qk; 81.07.-b     

Surface functionalization of chitosan-coated magnetic nanoparticles for covalent immobilization of yeast alcohol dehydrogenase from Saccharomyces cerevisiae

A novel and efficient immobilization of yeast alcohol dehydrogenase (YADH, EC1.1.1.1) from Saccharomyces cerevisiae has been developed by using the surface functionalization of chitosan-coated magnetic nanoparticles (Fe₃O₄/KCTS) as support. The magnetic Fe₃O₄/KCTS nanoparticles were prepared by binding chitosan alpha-ketoglutaric acid (KCTS) onto the surface of magnetic Fe₃O₄ nanoparticles. Later, covalent immobilization of YADH was attempted onto the Fe₃O₄/KCTS nanoparticles. The effect of various preparation conditions on the immobilized YADH process such as immobilization time, enzyme concentration and pH was investigated. The influence of pH and temperature on the activity of the free and immobilized YADH using phenylglyoxylic acid as substrate has also been studied. The optimum reaction temperature and pH value for the enzymatic conversion catalyzed by the immobilized YADH were 30 °C and 7.4, respectively. Compared to the free enzyme, the immobilized YADH retained 65% of its original activity and exhibited significant thermal stability and good durability.     

Surface-modification of indium tin oxide nanoparticles with titanium dioxide by a nonaqueous process and its photocatalytic properties

Indium tin oxide nanoparticles prepared by co-precipitation were re-dispersed in benzyl alcohol and modified successfully with titanium dioxide using titanium tetrachloride as precursor. The morphologies and the re-dispersing processes of both the initial and modified indium tin oxide nanoparticles were investigated, respectively. The photocatalytic properties of the modified nanoparticles were compared with commercial P25 photocatalyst. It was found that (i) the average diameter of the initial indium tin oxide nanoparticles was 10.7 nm and that of the surface-modified nanoparticles was 14.5 nm; (ii) the optimal ultrasonication time was 10.0 min and 8.0 min for the initial and surface-modified ITO nanoparticles, respectively; (iii) the modified particles possessed a higher photocatalytic activity than commercial P25 photocatalyst in the photodegradation of rhodamine B in aqueous medium at pH 5.00; (iv) the pH of the medium markedly influences the photodegradation efficiency.     

Synthesis and functionalization of magnetite nanoparticles with different amino-functional alkoxysilanes

Superparamagnetic iron oxide (SPIO) nanoparticles show great promise for many biotechnological applications. This paper addresses the synthesis and characterization of SPIO nanoparticles grafted with three different alkoxysilanes: 3-aminopropyl-triethoxysilane (APTES), 3-aminopropyl-ethyl-diethoxysilane (APDES) and 3-aminopropyl-diethy-ethoxysilane (APES). SPIO nanoparticles with an average particle diameter of 10 nm were prepared by chemical sonoprecipitation. As confirmed by Fourier transform infrared (FTIR) spectroscopy, silylation of these nanoparticles occurs through a two-step process. Decreasing the number of alkoxide groups reduced the concentration of free amino groups on the SPIO surface ([SPIO-NH₂]—APTES>APDES>APES). This phenomenon results from steric contributions and the formation of H-bonded amines provided by the ethyl groups present in the APDES and APES molecules. A simulation of SPIO nanoparticles in a saline physiologic solution shows that the ethyl groups impart larger steric stability onto the ferrofluids, which reduces aggregation. The magnetization (M) versus magnetic field (H) curves show that the synthesized iron oxide nanoparticles display superparamagnetic behavior. The zero-field cooling (ZFC) and field cooling (FC) curves show that the changes in the blocking temperature depend on the alkoxysilane-functionalized particle surface.     

Sintering of titanium dioxide nanoparticles: a comparison between molecular dynamics and phenomenological modeling

Molecular dynamics simulations were used to determine the melting points of anatase and rutile nanoparticles. The melting points decrease with decrease in particle diameter and are in reasonable agreement with the empirical formula derived by Buffat and Borel. The phenomenological model of Koch and Friedlander is unable to predict the temperature rise during initial stages of sintering with acceptable accuracy. It is argued that the Koch and Friedlander assumption of linear surface reduction rate upon sintering may be inadequate for the time scales under consideration. A theoretical model using direct area measurement from molecular dynamics simulations and a single adjustable parameter is able to predict temperature rise during initial stages of sintering within acceptable error limits.