Intramolecular interactions in poly(styrene-co-acrylonitrile)/poly(ε-caprolactone) blends

Specific interactions in blends of poly(ε-caprolactone) (PCL) and poly(styrene-co-acry-lonitrile) (SAN) were studied as a function of copolymer composition and blend ratio by using Fourier-transform infrared spectroscopy (FTIR). It was shown that miscibility occurred within a certain range of copolymer compositions because the presence of PCL reduced the thermodynamically unfavorable repulsion between styrene and acrylonitrile segments in the random copolymer. This effect was observed in terms of a shift to higher frequencies in the 700 cm^-1 γ-CH out-of-plane deformation vibration absorption of styrene and in the approximately 2236 cm^?1 C?N stretching frequency band in acrylonitrile segments. Specific intermolecular interactions between SAN and PCL were not observed in this study. © 1993 John Wiley & Sons, Inc.     

Mechanical and dynamic viscoelastic properties of hydroxyapatite reinforced poly(ε-caprolactone)

Poly(ε-caprolactone)/hydroxyapatite (PCL/HA) composites as potential bone substitutes were prepared by melt-blending. The melting, crystallization and glass transition temperatures deduced from differential scanning calorimetery and dynamic mechanical thermal analysis (DMTA) were all changed by the addition of HA, suggesting an interaction at the interface of these two phases. Quasi-static mechanical testing shows that the yield strength and Young's modulus of PCL were increased by the addition of the reinforcement filler, HA. Dynamic viscoelastic properties were investigated using DMTA and an advanced rheometric expansion system. The results show that both the storage modulus and viscous modulus are enhanced by HA, and the PCL composite melts still behave like pseudo-plastic liquid.     

Poly(ε-caprolactone) modified by functional groups: Preparation and chemical–physical investigation

Functionalization of polymers is a particular relevant approach in the field of biodegradable polymers, where modifications are often required to allow these materials to replace more conventional, not biodegradable polymers in a wider range of applications. This article will report on functionalization of poly(ε-caprolactone) with unsaturated monomers bearing either anhydride groups (PCL-g-(MA-GMA)) or tertiary amines (PCL-g-DMAEA), obtained through radical grafting in a Brabender mixer. Crystallization kinetics parameters have been determined with several techniques (rheology, optical microscopy and differential scanning calorimetry) and the results obtained are in good agreement. It was observed that the crystallization rate significantly increases in the case of the modified polymers.     

A study of phase separation of crystalline and miscible polymer blends. Poly(ε-caprolactone)/poly(styrene-co-acrylonitrile)

The phase separation of a crystalline and miscible polymer blend, poly(ε-caprolactone) /poly(styrene-co-acrylonitrile) (PCL/SAN), has been studied by differential scanning calorimetry (DSC), using a SAN containing 28.3% of acrylonitrile units. Several phenomena can be associated with the occurrence of phase separation depending upon the composition of the mixture. Following annealing at high temperatures, below and above the phase separation temperature T_c, three cases can be distinguished. In Case I, there is no sign of crystallization during quenching and DSC scanning, but a melting peak is observed at T_c, and above. In Case II, there is no crystallization on quenching but it does occur during the DSC run; the shift of the crystallization peak can then be related to T_c. In Case III, there is crystallization on quenching, and additional crystallization during the DSC run; the change of area of the crystallization peak is indicative of T_c. From these observations, the phase diagram of the system was determined. © 1993 John Wiley & Sons, Inc.     

Modeling of reactive systems in twin-screw extrusion: challenges and applications

Reactive extrusion processes involve the difficulties of mastering classical polymer processes, such as twin-screw extrusion for example, and the problems of controlling a chemical reaction in very specific conditions (high-viscosity medium, high temperatures, short residence times). Therefore, it is often very difficult to intuitively understand all the aspects of the process and to clarify the complex interactions between the numerous variables, and then to properly design and optimize the industrial process. Numerical modeling can be a very efficient tool to overcome these difficulties. However, it remains a real challenge, as it necessitates to couple flow simulation in complex geometry, reaction kinetics and evolutionary rheological behavior. Moreover, the information needed is sometimes difficult to obtain with the required accuracy. After a general presentation of the principles of the different reactive extrusion modeling methodologies, we will focus on the models we developed, based on continuum mechanics. Different examples of applications are presented for illustrating the interest of this method. To cite this article: B. Vergnes et al., C. R. Chimie 9 (2006).     

Ternary blends of phenoxy/SAN/poly(-ε-caprolactone)

The compatibilizing effect of poly(ε-caprolactone) (PCL) on the blends of two immiscible polymers, poly(hydroxy ether of bisphenol A) (phenoxy) and poly(styrene-co-acrylonitrile) (SAN) has been investigated. The phase behavior of the ternary blends was affected by the AN content in the SAN copolymers and a maximum miscible region was observed at 19.5 wt % of AN. The effect of AN content on the phase behavior of the ternary blends was interpreted in terms of the relative magnitude of the segmental interaction energy densities, which were obtained by combining a melting point depression and an extended binary interaction model. When a small amount of PCL was added to the phenoxy/SAN blends, the phase morphology showed a finer phase dispersion, indicating that the interfacial tension between the phenoxy and SAN is considerably reduced. However, the improvement in tensile properties was limited despite the morphological change with the PCL content. From the results of the DSC measurements, SEM, and tensile testing, it was understood that the PCL acted as a compatibilizer for the immiscible phenoxy/SAN blends. © 1994 John Wiley & Sons, Inc.     

Ring-Opening polymerization of ε-caprolactone by rare earth coordination catalysts. I. Characteristics,kinetics, and mechanism of ε-caprolactone polymerization with nd(acac)3.3H2O-ALET3 system

Ring-opening polymerization of ε-caprolactone has been carried out by using rare earth coordination catalysts for the first time. The rare earth compounds, RE(acac)₃.3H₂O, Nd(P₂₀₄)₃, Nd(P₅₀₇)₃, Nd(naph)₃, Nd(BA)₃.2H₂O, etc. (where RE = La, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Lu, Y; acac = acetylacetone; BA = benzoylacetone), combined with trialkyl aluminum, greatly increased the degree of conversion and the molecular weight of poly(ε-caprolactone) (PCL). The influence of reaction conditions on the polymerization of ε-caprolactone catalyzed by the Nd (acac)₃.3H₂O-AlEt₃ system has been examined in detail. The kinetics indicates that the polymerization rate has the first-order in monomer and a half-order in catalyst. The overall activation energy of the ring-opening polymerization amounts to 59.4 kJ/mol. By IR and UV-Vis spectra, ¹H- and ¹³C-NMR data, it is assumed that the ring-opening polymerization of ε-caprolactone catalyzed by the Nd(acac)₃.3H₂O-AlEt₃ system proceeds via complexation of monomer to catalyst, acyl-oxygen cleavage insertion propagation mechanism. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(ϵ-caprolactone)-poly(ethylene glycol) block copolymer

Poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone) triblock copolymers (PECL) covering a wide range of poly(ethylene glycol) (PEG) lengths were synthesized with alkali metal alkoxide derivatives of poly(ethylene glycol). The effects of various factors, such as amount of the initiator, reaction time and temperature, polarity of solvent, length of PEG segment, and counterion on the polymerization were investigated. The copolymers were characterized by ¹H-NMR, IR, GPC, and DSC. It was found that THF system is superior to toluene system. The conversion of the monomer increased with increase of the initiator concentration. High molecular weight of the copolymer and high conversion of the monomer was obtained at below 30°C within 5 min. The polymerization process was studied by GPC and the coexistence of propagation and transesterification reaction was found, which leaded to relatively broad molecular weight distribution of the copolymers. © 1997 John Wiley & Sons, Inc.     

Miscibility of poly(ε-caprolactone), a semicrystalline polymer,with amorphous poly(styrene-4-hydroxystyrene) copolymers

The miscibility of poly(ε caprolactone) (PCL) with poly(styrene-co-4-hydroxystyrene) (PHS) copolymers was investigated as a function of comonomer composition experimentally and with calculations by two models; the binary interaction model and the association model. PCL was found to be completely miscible with PHS copolymers containing 5 or more mole percent of 4-hydroxystyrene (HS) comonomer units for the entire range of blend compositions. Segmental interaction densities, B_ijs, were determined by the analysis of the equilibrium melting point depression and by the application of the binary interaction model. By correlating the segmental interaction energy densities with the binary interaction model, thermodynamic miscibility is for comonomer composition over five mole percent of 4-hydroxystyrene, which is in agreement with the experimental phase behavior. Application of the association model for specific interactions to blends also predicts the experimental miscibility boundary and phase behavior for all the PHS copolymers/PCL blends. © 1995 John Wiley & Sons, Inc.     

Miscibility of poly(ϵ-caprolactone) and of poly(styrene-co-acrylonitrile) with poly(styrene-co-acrylic acid)

The miscibility of poly (?-caprolactone) (PCL) with poly (styrene-co-acrylic acid) (SAA) and of poly (styrene-co-acrylonitrile) (SAN) with SAA was examined as a function of the comonomer composition in the copolymers. For PCL/SAA blends it was found that PCL is miscible with SAA within a specific range of copolymer compositions. Segmental interaction energy densities were evaluated by analysis of the equilibrium melting point depression and application of a binary interaction model. The results suggest that the intramolecular repulsion in SAA copolymer plays an important role in inducing the miscibility. Additionally, the critical AA content in SAA for the blend to be homogeneous was predicted by correlating the segmental interaction energy densities with the binary interaction model. For SAN/SAA blends, it was also found that SAA is miscible with SAN within a specific range of copolymer compositions. From the binary interaction model, segmental interaction energy denisties between different monomer units were estimated from the miscibility map and were found to be positive for all pairs, indicating that the miscibility of the blends is due to the strong repulsion in the SAA copolymers.     

Composites of poly(ε‐caprolactone) and Mo6S3I6 Nanowires

Composites of poly(ε‐caprolactone) (PCL) and molybdenum sulfur iodine (MoSI) nanowires were prepared using twin‐screw extrusion. Extensive microscopic examination of the composites revealed the nanowires were well dispersed in the PCL matrix, although bundles of Mo₆S₃I₆ ropes were evident at higher loadings. Secondary electron imaging (SEI) showed the nanowires had formed an extensive network throughout the PCL matrix, resulting in increased electrical conductivity of PCL, by eight orders of magnitude, and an electrical percolation threshold of 6.5 × 10^?3 vol%. Thermal analysis (DSC), WAXD, and hot stage polarized optical microscopy (HSPOM) experiments revealed Mo₆S₃I₆ addition altered PCL crystallization kinetics, nucleation density, and crystalline content. A greater number of smaller spherulites were formed via heterogeneous nucleation. The onset of thermal decomposition (TGA) of PCL decreased by 70°C, a consequence of the thermal degradation of Mo₆S₃I₆ to MoO₃, which in turn accelerates the formation of volatile gases during the first stage of PCL decomposition. Copyright © 2010 John Wiley & Sons, Ltd.     

Biodegradable materials by reactive extrusion: from catalyzed polymerization to functionalization and blend compatibilization

This contribution aims at reviewing how reactive extrusion (REx) technique can participate in the design and development of biodegradable polymeric materials more particularly based on aliphatic polyesters issued from both renewable (agrochemical) and fossil (petrochemical) resources. On one side, REx will be approached for producing in a continuous way biodegradable aliphatic polyesters by ring-opening polymerization of lactones. Tin and aluminum-based catalysts will be considered for quantitatively converting the cyclic monomer in high molecular weight polyester chains within residence time of a few minutes only. On the other hand, such polyesters will undergo various chemical modifications again performed by REx. Self-branching reactions will be investigated in order to compensate the characteristic molecular weight reduction of the polyester chains as triggered by hydrolysis and/or transesterification side-reactions. Controlled functionalization reactions by maleic anhydride treatment will be studied as well. Finally biodegradable composite materials will be produced by REx and will rely upon the interface compatibilization between the polyester matrix and natural fillers such as starch granules or talc microparticles. To cite this article: J.-M. Raquez, et al., C. R. Chimie 9 (2006).     

Sonolysis of actinide(IV) β-diketonates in alkanes

Ultrasonic irradiation with the frequency of 20–22 kHz and absorbed acoustic power about 0.4 W ml^–1 causes degradation of An(IV) tetrakis-β-diketonates, AnL₄, where An(IV) is Th(IV), Np(IV), and Pu(IV), and HL is hexafluoroacetylacetone (HFAA) and dibenzoylmethane (HDBM), in hexadecane solutions in the presence of argon. The rate of the sonochemical process corresponds to a first-order kinetic law with respect to metal β-diketonate concentrations. The first-order rate constant of sonolysis increases with the increase in the volatility of the metal complexes. Solid sonication products consisted of a mixture of actinide carbides and partial degradation products, PDP, of initial metal β-diketonates. It is assumed that metal carbides are formed within the cavitating bubbles as a result of high-temperature process with participation of actinide(IV) β-diketonates and solvent vapours. PDP formation is attributed to the thermolysis of the complexes in a liquid reaction zone surrounding the cavitating bubble. To cite this article: S.I. Nikitenko et al., C. R. Chimie 7 (2004).

Résumé

L’irradiation ultrasonore avec une fréquence de 20–22 kHz et une intensité acoustique de 0,4 W ml^–1 conduit à la décomposition de An(IV) tétrakis-β-dicétones, AnL₄, où An(IV) est Th(IV), Np(IV) et Pu(IV), et HL est l’hexafluoroacétylacétone (HFAA) et le dibenzoylméthane (HDBM) en milieu hexadécane sous argon. La cinétique de décomposition sonochimique est d’ordre 1 par rapport à la concentration du complexe et la cinétique augmente avec la volatilité du complexe métallique. Les produits solides de décomposition sont un mélange de carbure d’actinides et de produits de décomposition partielle PDP. Il a été observé que les carbures d’actinide sont formés dans la bulle de cavitation compte tenu des fortes températures et de la présence simultanée du complexe métallique volatil et du solvant (hexadécane). La formation des PDP est attribuée à la thermolyse du complexe à l’interface de la bulle de cavitation. Pour citer cet article : S.I. Nikitenko et al., C. R. Chimie 7 (2004).     

Pendant groups fine‐tuning thermal gelation of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) aqueous solution

Novel poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (PCL‐PEG‐PCL) bearing pendant hydrophobic γ‐(carbamic acid benzyl ester) groups (PECB) and hydrophiphilic amino groups (PECN) were synthesized based on the functionalized comonomer γ‐(carbamic acid benzyl ester)‐ε‐caprolactone (CABCL). The thermal gelation behavior of the amphiphilic copolymer aqueous solutions was examined. The phase transition behavior could be finely tuned via the pendant groups, and an abnormal phenomenon occurred that the sol–gel transition temperature shifted to a higher temperature for PECB whereas a lower temperature for PECN. The micelles percolation was adopted to clarify the hydrogel mechanism, and the effect of the pendant groups on the micellization was further investigated in detail. The results demonstrated that the introduction of γ‐(carbamic acid benzyl ester) pendant groups significantly decreased the crystallinity of the copolymer micelles whereas amino pendant groups made the micelles easy to aggregate. Thus, the thermal gelation of PEG/PCL aqueous solution could be finely tuned by the pendant groups, and the pendant groups modified PEG/PCL hydrogels are expected to have great potential biomedical application. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2571–2581     

Hydrolytic degradation of poly(ε‐caprolactone) with different end groups and poly(ε‐caprolactone‐co‐γ‐butyrolactone): characterization and kinetics of hydrocortisone delivery

Asymmetric telechelic α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone) (HA‐PCL), α‐hydroxyl‐ω‐(benzylic ester)‐poly(ε‐caprolactone) (HBz‐PCL), and an asymmetric telechelic copolymer α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone‐co‐γ‐butyrolactone) (HA‐PCB) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL). CL and CL/γ‐butyrolactone mixture were used to obtain homopolymers and copolymer respectively at 150°C and 2 hr using ammonium decamolybdate (NH₄) [Mo₁₀O₃₄] (Dec) as a catalyst. Water (HA‐PCL and HA‐PCB) or benzyl alcohol (HBz‐PCL) were used as initiators. The three polylactones reached initial molecular weights between 2000 and 3000 Da measured by proton nuclear magnetic resonance (¹H‐NMR). Compression‐molded polylactone caplets were allowed to degrade in 0.5 M aqueous p‐toluenesulfonic acid at 37°C and monitored up to 60 days for weight loss behavior. Data showed that the copolymer degraded faster than the PCL homopolymers, and that there was no difference in the weight loss behavior between HA‐PCL and HBz‐PCL. Caplets of the three polylactones containing 1% (w/w) hydrocortisone were placed in two different buffer systems, pH 5.0 with citrate buffer and pH 7.4 with phosphate buffer at 37°C, and monitored up to 50 days for their release behavior. The release profiles of hydrocortisone presented two stages. The introduction of a second monomer in the polymer chain significantly increased the release rate, the degradation rate for HA‐PCB being faster than those for HBz‐PCL and HA‐PCL. At the pH studied, only slight differences on the liberation profiles were observed. SEM micrographs indicate that hydrolytic degradation occurred mainly by a surface erosion mechanism. Copyright © 2009 John Wiley & Sons, Ltd.     

Microwave syntheses of poly(ε‐caprolactam‐co‐ε‐caprolactone)

Microwave irradiation was applied to synthesize poly(ε‐caprolactam‐co‐ε‐caprolactone) directly from the anionic catalyzed ring opening of two cyclic monomers, ε‐caprolactam and ε‐caprolactone using a variable frequency microwave furnace, programmed to a set temperature and controlled by a pulsed power on–off system. Dielectric properties of ε‐caprolactam, ε‐caprolactone, and their mixture were measured in the microwave range from 0.4 to 3 GHz, showing that both ε‐caprolactam and ε‐caprolactone exhibited effective absorption of microwave energy to induce a fast chemical reaction. The microwave induced anionic copolymerization of ε‐caprolactam and ε‐caprolactone generated copoly(amide‐ester)s in yields as high as 70%. Conventional thermal and microwave copolymerization studies were also conducted for comparison with the microwave results. These studies demonstrated that an effective and efficient microwave method to copolymerize ε‐caprolactam with ε‐caprolactone in higher yield, higher amide content, and higher T_g 's, relative to the thermal process, has been developed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1379–1390, 2000     

Synthesis and structure of the unsymmetrical β-diimine precursor: The β-iminoamine

The reaction of benzoylacetone with ortho-substituted aniline derivatives gives the unsymmetrical β-iminoamine ligands (5–8) with high yields. A convenient synthesis is described. These compounds have been characterized by NMR and IR spectroscopies. The structure of the β-iminoamine 5, 3-N-(2,6-diisopropylphenylamino)-1-phenyl-1N-(2,6-diisopropylphenylimino)but-2-ene, was solved by X-ray diffraction methods.     

Nonisothermal crystallization kinetics of poly(ε‐caprolactone) blocks in double crystalline triblock copolymers containing poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) and poly(ε‐caprolactone) units

The poly(3‐hydroxbutyrate‐co‐3‐hydroxyvalerate)/poly(ε‐caprolactone) block copolymers (PHCLs) with three different weight ratios of PCL blocks (38%, named PHCL‐38; 53%, named PHCL‐53; and 60%, named PHCL‐60) were synthesized by using PHBV with two hydroxyl end groups to initiate ring‐opening polymerization of ε‐caprolactone. During DSC cooling process, melt crystallization of PHCL‐53 at relatively high cooling rates (9, 12, and 15 °C min^?1) and PHCL‐60 at all the selected cooling rates corresponded to PCL blocks so that PHCL‐53 and PHCL‐60 were used to study the nonisothermal crystallization behaviors of PCL blocks. The kinetics of PCL blocks in PHCL‐53 and PHCL‐60 under nonisothermal crystallization conditions were analyzed by Mo equation. Mo equation was successful in describing the nonisothermal crystallization kinetics of PCL blocks in PHCLs. Crystallization activation energy were estimated using Kissinger's method. The results of kinetic parameters showed that both blocks crystallized more difficultly than corresponding homopolymers. With the increase of PCL content, the crystallization rate of PCL block increased gradually. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010