Influence of anions on the dimensionality of extended networks based on Cu I cations and 1,4,5,8,9,12-hexaazatriphenylene (HAT) ligands

Reactions of Cu I salts with 1,4,5,8,9,12-hexaazatriphenylene (HAT) afford three types of cationic coordination polymers depending on the anion present in the reaction solution. In the crystal structure of {[Cu(HAT)][BF4]x1/3(C6H6)}infinity, (1), Cu ions and HAT molecules form extended layers that are best described as strongly distorted honeycomb nets. The space between the layers is occupied by [BF4]- anions and solvent molecules. {[Cu(HAT)][PF6]}infinity, (2), crystallizes as a chiral (10,3)-a net with [PF6]- anions residing in the cavities of the three-dimensional metal-organic framework. The crystal structure of {[Cu4(HAT)3][SbF6]4x3C6H6}infinity, (3), is based on unique extended [Cu4(HAT)3]infinity "nanotubules" filled with solvent molecules and [SbF6]- anions.     

Copper(I) complexes of tripodal tris(imidazolyl) ligands: potential mimics of the Cu(A) site of hydroxylase enzymes

Copper(I) complexes of tripodal tris(N-methyl-4,5-diphenyl-imidazolyl)methane ligands, N3CR (1a-c, R = OH, OMe, H), have been prepared as models for the Cu(A) site of copper hydroxylase enzymes. In the absence of additional donors, the ligands 1 react with [Cu(CH3CN)4]PF6 (2) to produce dinuclear complexes [(N3CR)2Cu2](PF6)2 (3) in which the tripodal ligands bridge two trigonal Cu centers; the structures of 3b and 3c are established by X-ray diffraction. Mononuclear adducts [(N3CR)CuL]Z are produced with L = acetonitrile (4), carbon monoxide (5), and t-BuNC (6, 7). The carbonyl complexes 5 are in dynamic equilibrium with the dimeric complexes 3, but 5c (R = H) can be isolated. The structures of the isocyanide derivatives depend critically on the tripod methane substituent, R. Thus, the X-ray structures of 6 (R = OMe) and 7 (R = H) show trigonal and tetrahedral geometries, respectively, with bi- or tridentate coordination of the tripod. A trinuclear complex [Cu3(N3COH)2(t-BuNC)2](PF6)3 (8) is formed from N3COH (1a) which features both three-coordinate and two-coordinate Cu atoms and bidentate tripod coordination. Reactions of dioxygen with dinuclear 3c or mononuclear [(N3CR)CuL]Z are sluggish, producing from the latter in acetone [(N3CH)CuII(L)(L')](PF6)2 (9, L = acetone, L' = H2O).     

Tetra-, di-, and mononuclear copper(I) complexes containing (S,S)-iPr-pybox and (R,R)-Ph-pybox ligands

Tetranuclear [Cu4I4{(S,S)-iPr-pybox}2] (1) and dinuclear [Cu2Cl-{(S,S)-iPr-pybox}2][CuCl2] (2) copper(I) complexes have been synthesized by reaction of iPr-pybox with CuI and CuCl, respectively. Furthermore, dinuclear [Cu2(R-pybox)2][PF6]2 [R-pybox = (R,R)-Ph-pybox (3), (S,S)-iPr-pybox (4)] and mononuclear complexes [Cu(R-pybox)2][PF6] [R-pybox = (R,R)-Ph-pybox (5), (S,S)-iPr-pybox (6)] have been prepared by reaction of [Cu(MeCN)4][PF6] and the corresponding pybox. The structures of complexes 1-3 have been determined by X-ray diffraction analyses.     

A meso-helical coordination polymer from achiral dinuclear [Cu2(H3CCN)2(micro-pydz)3][PF6]2 and 1,3-bis(diphenylphosphanyl)propane-synthesis and crystal structure of 1 to infinity Cu(mu-pydz)2][PF6 (pydz=pyridazine)

Reaction of achiral [Cu2(H3CCN)2(mu-pydz)3][PF6]2 (1) (pydz = pyridazine) with bidendate 1,3-bis(diphenylphosphanyl)propane (2) in acetonitrile at room temperature in a 1:1 ratio yielded the mononuclear copper(I) complex [Cu[CH2(CH2PPh2)2]2][PF6] (3) together with new one-dimensional coordination polymer 1 to infinity[[Cu(mu-pydz)2][PF6]] (4). Air-sensitive single crystals of 4, suitable for X-ray structure determination, were grown from a mixture of dichloromethane/ hexane [crystal system: monoclinic; space group: C2/c: a = 21.910(3), b = 12.130(2), c = 25.704(3) A,beta = 110.08(10) degrees, V = 6416.65(16) A3]. The one-dimensional coordination polymer 1 to infinity[[Cu(mu-pydz)2][PF6]] (4) exhibits as outstanding feature the rare structure of a meso-helix.     

Mechanistic studies of copper(I)-catalyzed allylic amination

The reactions of nitrosobenzene and N,N'-diethyl-4-nitrosoaniline with [Cu(CH3CN)4]PF6 provide novel Cu(I) complexes, [Cu(PhNO)3]PF6 (1) and [Cu(Et2NPhNO)3]PF6 (2); in 2 the copper atom is N-coordinated to the nitrosoarenes in a distorted trigonal planar geometry. Complex 1 is strongly implicated as a reactive intermediate in the Cu(I)-catalyzed allylic amination of olefins based on (i) its isolation from the catalytic reaction, (ii) its stoichiometric regioselective allylic amination of alpha-methyl styrene (AMS), (iii) the non-involvement of free PhNO in its amination of AMS, and (iv) its function as a catalyst for the amination of alkenes from phenylhydroxylamine. The reaction between AMS and 1 (80 degrees C, dioxane) is first order in both alkene and 1. Relative rate studies of the reaction of 1 with para substituted AMS derivatives gives a Hammett rho value of -0.035. Alkene adducts isolated from the reaction of 1 with styrene and alpha-methylstyrene are formulated as [(PhNO)3Cu(eta(2)-alkene)]PF6 (7,8) on the basis of spectroscopic characterization and thermolysis. PM3 and DFT MO calculations support the role of [(alkene)Cu(RNO)3]+ and (eta(1)- or eta(3)-allyl)Cu(RNO)2(RNHOH)+ complexes as probable catalytic intermediates and address the origin of the distinctive reaction regioselectivity. A mechanistic scheme is proposed which is consistent with the accumulated experimental and computational results.     

3[(dx2-y2,dxy)(pz)] excited state of binuclear copper(I) phosphine complexes: effect of copper-ligand and copper-copper interactions on excited state properties and photocatalytic reductions of the 4,4'-dimethyl-2,2'-bipyridinium ion in alcohols

A comprehensive study of the structural and spectroscopic properties of two-, three-, and four-coordinate copper(I) complexes with aliphatic phosphine ligands is presented. All complexes described in this work are characterized by X-ray crystallography. The intramolecular Cu...Cu separations in [Cu2(dcpm)2]X2, [Cu2(dcpm)2-(CH3CN)2]X2, and [Cu2(dmpm)3]-(ClO4)2 (dcpm=bis(dicyclohexylphosphino)methane; dmpm=bis(dimethylphosphino)methane; X=ClO4- and PF6-) are in the range 2.639(2)-3.021(2) A. The anion...CuI interaction is weak, as evidenced by the nearest O...Cu separation of 2.558(6) A in [Cu2(dcpm)2](ClO4)2 and the closest Cu...F separation of 2.79(1) A in [Cu2(dcpm)2](PF6)2. The absorption bands of [Cu2(dcpm)2]X2 and [Cu2(dcpm)2(CH3CN)2]X2 (X=ClO4- and PF6-) at lambda max 307-311 nm in CH2Cl2 are assigned as 1[3d sigma* --> 4p sigma] transitions; this has been confirmed by resonance Raman spectroscopy. The triplet emissions in the visible region from these complexes exhibit long lifetimes and are sensitive to the environment. The lowest emissive excited state is tentatively ascribed as 3[(dx2-y2, dxy)(pz)] in nature. For [Cu2(dcpm)2]2+ salts in CH3CN, the emissive species is postulated to be [Cu2(dcpm)2(CH3CN)n]2+ (n > or = 3). Efficient photocatalytic reduction of MV2+ (4,4'-dimethyl-2,2'-bipyridinium) to MV+ in alcoholic solutions by using [Cu2(dcpm)2](PF6)2 or [Cu2(dppm)2(CH3CN)4](ClO4)2 (dppm=bis(diphenylphosphino)methane) as a catalyst has been observed. The addition of CH3CN or use of [Cu2(dmpm)3]-(ClO4)2 as a catalyst did not allow photocatalytic reduction processes to occur.     

Silver(I) complexes of fixed, polytopic bis(pyrazolyl)methane ligands: influence of ligand geometry on the formation of discrete metallacycles and coordination polymers

Reactions of the arene-linked bis(pyrazolyl)methane ligands m-bis[bis(1-pyrazolyl)methyl]benzene, (m-[CH(pz)2]2C6H4, Lm), p-bis[bis(1-pyrazolyl)methyl]benzene, (p-[CH(pz)2]2C6H4, Lp), and 1,3,5-tris[bis(1-pyrazolyl)methyl]benzene (1,3,5-[CH(pz)2]3C6H3, L3) with AgX salts (pz = 1-pyrazolyl; X = BF4- or PF6-) yield two types of molecular motifs depending on the arrangement of the ligating sites about the central arene ring. Reactions of the m-phenylene-linked Lm with AgBF4 and AgPF6 afford complexes consisting of discrete, metallacyclic dications: [Ag2(mu-Lm)2](BF4)2 (1) and [Ag2(mu-Lm)2](PF6)2 (2). When the p-phenylene-linked Lp is treated with AgBF4 and AgPF6, acyclic, cationic coordination polymers are obtained: {[Ag(mu-Lp)]BF4}infinity (3) and {[Ag(mu-Lp)]PF6}infinity (4). Reaction of the ligand L3, containing three bis(pyrazolyl)methane units in a meta arrangement, with an equimolar amount of AgBF4 again yields discrete metallacyclic dications in which one bis(pyrazolyl)methane unit on each ligand remains unbound: [Ag2(mu-L3)2](BF4)2 (5). Treatment of L3 with an excess of AgBF4 affords a polymer of metallacycles, {[Ag3(mu-L3)2](BF4)3}infinity (6), with one of the bis(pyrazolyl)methane units on each ligand bound to a silver cation bridging two metallacycles. The supramolecular structures of the silver(I) complexes 1-6 are organized by noncovalent interactions, including weak hydrogen bonding, pi-pi, and anion-pi interactions.     

Unexpected reactivities of Cu2(diphosphine)2 complexes in alcohol: isolation, x-ray crystal structure, and photoluminescent properties of a remarkably stable [Cu3(diphosphine)3(mu3-H)]2+ hydride complex

Treatment of [Cu2(dcpm)2]Y2 (dcpm = bis(dicyclohexylphosphino)methane, Y = ClO4-, BF4-, PF6-, CF3SO3-) with refluxing MeOH in the presence of KOH afforded hydride complexes [Cu3(dcpm)3(mu3-H)]Y2 (1) in about 85% yield. Refluxing [Cu2(dcpm)2](PF6)2 with MeOH in the presence of NH3.H2O and air gave a carboxylate complex [Cu2(dcpm)2(O2CCH2OH)]PF6 (2) in 40% yield. All of the complexes 1 and 2 have been characterized by X-ray crystallography. The Cu3 cores in 1 are almost perfectly shielded by the dcpm ligands. Intense photoluminescence was observed for 1 both in the solid state and in solution.     

Structural variations and spectroscopic properties of luminescent mono- and multinuclear silver(I) and copper(I) complexes bearing phosphine and cyanide ligands

Reaction of equimolar amounts of AgCN and PCy3 gave the polymer [(Cy3P)Ag(NCAgCN)]infinity (1), whereas employment of excess PCy3 yielded the discrete compound [(Cy3P)2Ag(NCAgCN)] (2). Reacting bis(dicyclohexylphosphino)methane (dcpm) with AgCN in 1:1 and 1:2 molar ratios gave two crystalline forms, namely [Ag2(mu-dcpm)2][Ag(CN)2]2 x (CH3OH)2 (3a x (CH3OH)2) and [Ag2(mu-dcpm)2][Ag(CN)2]2 (3b), respectively. The similar reaction of CuCN with PCy3 afforded the polymeric compound [{(Cy3P)Cu(CN)}3]infinity (4), whereas treatment of CuCN with dcpm gave [Cu2(mu-dcpm)2(CN)2] (5). Employment of diphosphine ligands with longer -(CH2)n- spacers, such as 1,2-bis(dicyclohexylphosphino)ethane (dcpe, n = 2) and 1,3-bis(diphenylphosphino)propane (dppp, n = 3), in reactions with [Cu(CH3CN)4]PF6 and KCN afforded the macrocylic compounds [{Cu(dcpe)}2(CN)(mu-dcpe)]PF6 (6(PF6)) and [{Cu(dppp)}3(CN)2(mu-dppp)]PF6 (7(PF6)), respectively. The hexanuclear complex [Cu(CN)(PCy3)]6 (8) was obtained by reacting CuCN with PCy3 in the presence of sodium pyridine-2-thiolate. The UV-vis absorption spectrum of 1 in acetonitrile displays a weak shoulder at 245 nm (epsilon = 350 dm3 mol(-1) cm(-1)). For 3a, 3b, and 5, the intense absorption bands at lambdamax = 257-276 nm with epsilon values of (1.73-1.80) x 10(4) dm3 mol(-1) cm(-1) are assigned to [ndsigma --> (n + 1)psigma] transitions. Complexes 3a and 3b emit at lambdamax = 365 nm in CH3CN (quantum yield approximately 6 x10(-3), lifetime approximately 0.2 micros). The solid-state emission of 5 (lambdamax = 470 and 488 nm at 298 and 77 K) is red-shifted in energy from that of 4 (lambdamax = 401 and 405 nm at 298 and 77 K, respectively). In 77 K MeOH/EtOH (1:4) glassy solution, complexes 4-8 display intense emission with lambdamax at 382-416 nm, which is assigned to the [3d --> (4s, 4p)] triplet excited state.     

Synthesis of nitrosylruthenium complexes containing 2,2':6',2"-terpyridine by reactions of alkoxo complexes with acids

Nitrosylruthenium complexes containing 2,2':6',2"-terpyridine (terpy) have been synthesized and characterized. The three alkoxo complexes trans-(NO, OCH3), cis-(Cl, OCH3)-[RuCl(OCH3)(NO)(terpy)]PF6 ([2]PF6), trans-(NO, OC2H5), cis-(Cl, OC2H5)-[RuCl(OC2H5)(NO)(terpy)]PF6 ([3]PF6), and [RuCl(OC3H7)(NO)(terpy)]PF6 ([4]PF6) were synthesized by reactions of trans-(Cl, Cl), cis-(NO, Cl)-[RuCl2(NO)(terpy)]PF6 ([1]PF6) with NaOCH3 in CH3OH, C2H5OH, and C3H7OH, respectively. Reactions of [3]PF6 with an acid such as hydrochloric acid and trifluoromethansulforic acid afford nitrosyl complexes in which the alkoxo ligand is substituted. The geometrical isomer of [1]PF6, trans-(NO, Cl), cis-(Cl, Cl)-[RuCl2(NO)(terpy)]PF6 ([5]PF6), was obtained by the reaction of [3]PF6 in a hydrochloric acid solution. Reaction of [3]PF6 with trifluoromethansulforic acid in CH3CN gave trans-(NO, Cl), cis-(CH3CN, Cl)-[RuCl(CH3CN)(NO)(terpy)]2+ ([6]2+) under refluxing conditions. The structures of [3]PF6, [4]PF6.CH3CN, [5]CF3SO3, and [6](PF6)2 were determined by X-ray crystallograpy.     

Synthesis and reactivity of copper(I) complexes containing a bis(imidazolin-2-imine) pincer ligand

The new pincer ligand 2,6-bis[(1,3-di-tert-butylimidazolin-2-imino)methyl]pyridine (TL(tBu)) has been prepared in high yield from 2,6-bis(hydroxymethyl)pyridine (1) and 1,3-di-tert-butylimidazolin-2-imine (3). Reaction of TL(tBu) with [Cu(MeCN)4]PF6 affords the highly reactive copper(I) complex [(TL(tBu))Cu]PF6, [5]PF6, which forms the stable copper(I) isocyanide complexes [6a]PF6 (nu(CN) = 2179 cm(-1)) and [6b]PF6 (nu(CN) = 2140 cm(-1)) upon addition of tert-butyl or 2,6-dimethylphenyl isocyanide, respectively. For the cations 6a and 6b, DFT calculations reveal ground-state electronic structures of the type [(TL(tBu)-kappaN(1):kappaN(2))Cu(CNR)] with tricoordinate geometries around the copper atoms. Exposure of [5]PF6 to the air readily leads to trapping of atmospheric CO2 to form the square-planar complex [(TL(tBu))Cu(HCO3-kappaO)]PF6, [7]PF6, with the bicarbonate ligand adopting a rarely observed monodentate coordination mode. In chlorinated solvents such as dichloromethane or chloroform, [5]PF(6) rapidly abstracts chloride by reductive dechlorination of the solvent to yield [(TL(tBu))CuCl]PF6, [8]PF6 quantitatively. Reaction of TL(tBu) with copper(I) bromide or chloride affords complexes 9a and 9b, respectively, for which X-ray diffraction analysis, low-temperature NMR experiments and DFT calculations reveal the presence of a kappa(2)-coordinated ligand of the type [(TL(tBu)-kappaN(1):kappaN(2))CuX]. In solution, complex 9b undergoes slow disproportionation forming the mixed-valence copper(II)/copper(I) system [(TL(tBu))CuCl][CuCl2], [8]CuCl2 with a linear dichlorocuprate(I) counterion.     

Angular ligand constraint yields an improved olefin aziridination catalyst

[reaction: see text] The use of a pyridinophane, a macrocycle composed of three pyridines linked, via all ortho positions through CH(2) or CH(2)CH(2) groups, bound to copper, gives good performance (rate and yield) catalyzing the conversion of substituted aliphatic olefins and PhINTs to aziridines. Advantages also derive from using CH(2)Cl(2) solvent and the weakly coordinating anions BAr(4)(-) (Ar = C(6)H(5) or 3,5-C(6)H(3)(CF(3))(2)). Reactions are complete in minutes at 20 degrees C, and yields are almost quantitative for olefins not bearing secondary allylic CH bonds; however, cis-cyclooctene gives only the aziridine despite the allylic hydrogens.     

The intramolecular aryl embrace: from light emission to light absorption

6-(1-Methylpyrrol-2-yl)-2,2'-bipyridine, 3, and 6-(selenophene-2-yl)-2,2'-bipyridine, 4, have been prepared and characterized in solution and by structural determinations. Copper(I) complexes [CuL(2)][PF(6)] in which L is 2,2'-bipyridine substituted in the 6-position by furyl, thienyl, N-methylpyrrolyl, selenopheneyl, methyl or phenyl, (L = 1-6) have been synthesized. The complexes have been characterized by electrospray mass spectrometry, and solution NMR and UV-VIS spectroscopies. The single crystal structures of [Cu(1)(2)][PF(6)], [Cu(2)(2)][PF(6)], [Cu(3)(2)][PF(6)], [Cu(5)(2)][PF(6)] and [Cu(6)(2)][PF(6)] have been determined. In those compounds containing an aromatic substituent attached to the bpy unit, the substituent is twisted with respect to the latter. In [Cu(3)(2)][PF(6)] and [Cu(5)(2)][PF(6)], this results in intra-cation π-stacking between ligands which is very efficient in [Cu(3)(2)](+) despite the steric requirements of the N-methyl substituents. Face-to-face stacking between the ligands in the [Cu(2)(2)](+) ion is achieved by complementary substituent twisting and elongation of one Cu-N bond, but there is no analogous intra-cation π-stacking in [Cu(1)(2)](+). Ligand exchange reactions between [CuL(2)][PF(6)] (L = 1-6) and TiO(2)-anchored ligands 7-10 (L' = 2,2'-bipyridine-based ligands with CO(2)H or PO(OH)(2) anchoring groups) have been applied to produce 24 surface-anchored heteroleptic copper(i) complexes, the formation of which has been evidenced by using MALDI-TOF mass spectrometry and thin layer solid state diffuse reflectance electronic absorption spectroscopy. The efficiencies of the complexes as dyes in DSCs have been measured, and the best efficiencies are observed for [CuLL'] with L' = 10 which contains phosphonate anchoring groups.     

Syntheses, reactions, and ethylene polymerization of titanium complexes with [N,N,S] ligands

Tridentate dianionic arylsulfide free ligands [ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (3a); Ar = 2,4,6-trimethylphenyl (3b); Ar = 2,6-diisopropylphenyl (3c)) have been prepared by reduction of the corresponding imine compounds [ArN[double bond, length as m-dash]CHC(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (2a); Ar = 2,4,6-trimethylphenyl (2b); Ar = 2,6-diisopropylphenyl (2c)) with LiAlH(4) in high yields. Reactions of TiCl(4) with the tridentate dianionic arylsulfide free ligands (3a-3c) afford five-coordinate and four-coordinate titanium complexes [κS, κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = Ph (4a); Ar = 2,4,6-trimethylphenyl (4b)] and [κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = 2,6-diisopropylphenyl (4c)], respectively. The molecular structures of compounds 2b, 2c, 3b and 3c·HCl have been characterized by single crystal X-ray diffraction analyses. Complexes 2a-4c are characterized by IR,(1)H-NMR spectra, and elemental analysis. EXAFS spectroscopy performed on complexes 4b and 4c reveals the expected different coordination geometry due to steric hindrance effect. When activated by excess methylaluminoxane (MAO), 4a-4c can be used as catalysts for ethylene polymerization and exhibit moderate to good activities.     

Metal Complexes of Mesitylphosphine: Synthesis, Structure, and Spectroscopy

A series of primary phosphine homoleptic complexes [ML(4)](n)()(+)X(n)() (1, M = Ni, n = 0; 2, M = Pd, n = 2, X = BF(4); 3, M = Cu, n = 1, X = PF(6); 4, M = Ag, n = 1, X = BF(4); L = PH(2)Mes, Mes = 2,4,6-Me(3)C(6)H(2)] was prepared from mesitylphosphine and Ni(COD)(2), [Pd(NCMe)(4)][BF(4)](2), [Cu(NCMe)(4)]PF(6), and AgBF(4), respectively. Reactions of 1-4 with MeC(CH(2)PPh(2))(3) (triphos) or [P(CH(2)CH(2)PPh(2))(3)] (tetraphos) afforded the derivatives [M(L')L](n)()(+)X(n)() (L' = triphos; 6, M = Ni, n = 0; 7, M = Cu, n = 1, X = PF(6); 8, M = Ag, n = 1, X = BF(4); L' = tetraphos; 9, M = Pd, n = 2, X = BF(4)). Addition of NOBF(4) to 1 yielded the nitrosyl compound [NiL(3)(NO)]BF(4), 5. The solution structure and dynamics of 1-9 were studied by (31)P NMR spectroscopy (including the first reported analyses of a 12-spin system for 1-2). Complexes 1, 3, 6, and 7.solvent were characterized crystallographically. The structural and spectroscopic studies suggest that the coordination properties of L are dominated by its relatively small cone angle and that the basicity of L is comparable to that of more commonly used tertiary phosphines.     

Synthesis, spectroscopic, and structural studies on transition metal complexes involving homoleptic tripodal selenoether and telluroether coordination

The reaction of [MCl2(NCMe)2] (M = Pd or Pt) with 2 molar equiv of MeC(CH2ER)3 (E = Se, R = Me; E = Te, R = Me or Ph) and 2 molar equiv of TlPF6 affords the bis ligand complexes [M(MeC(CH2ER)3)2][PF6]2. The crystal structure of [Pt(MeC(CH2SeMe)3)2][PF6]2 (C16H36F12P2PtSe6, a = 12.272(10) A, b = 18.563(9) A, c = 15.285(7) A, beta = 113.18(3) degrees, monoclinic, P2(1)/n, Z = 4) confirms distorted square planar Se4 coordination at Pt(II), derived from two bidentate tripod selenoethers with the remaining arm not coordinated and directed away from the metal center. Solution NMR studies indicate that these species are fluxional and that the telluroether complexes are rather unstable in solution. The octahedral bis tripod complexes [Ru(MeC(CH2SMe)3)2][CF3-SO3]2 and [Ru(MeC(CH2TePh)3)2][CF3SO3]2 are obtained from [Ru(dmf)6][CF3SO3]3 and tripod ligand in EtOH solution. The thioether complex (C18H36F6O6RuS8, a = 8.658(3) A, b = 11.533(3) A, c = 8.659(2) A, alpha = 108.33(2) degrees, beta = 91.53(3) degrees, gamma = 106.01(2) degrees, triclinic, P1, Z = 1) is isostructural with its selenoether analogue, involving two facially coordinated trithioether ligands in the syn configuration. NMR spectroscopy confirms that this configuration is retained in solution for all of the bis tripod Ru(II) complexes. These low-spin d6 complexes show unusually high ligand field splittings. The hexaselenoether Rh(III) complex [Rh(MeC(CH2SeMe)3)2][PF6]3 was obtained by treatment of [Rh(H2O)6]3+ with 2 molar equiv of MeC(CH2SeMe)3 in aqueous MeOH in the presence of excess PF6- anion, while the iridium(III) analogue [Ir(MeC(CH2SeMe)3)2][PF6]3 was obtained via the reaction of the Ir(I) precursor [IrCl(C8H14)2]2 with the selenoether tripod in MeOH/aqueous HBF4. NMR studies reveal different invertomers in solution for both the Rh and Ir species. The Cu(I) complexes [Cu(MeC(CH2ER)3)2]PF6 were obtained from [Cu(NCMe)4]PF6 and tripod ligand in CH2Cl2 solution. The corresponding Ag(I) species [Ag(MeC(CH2TeR)3)2]CF3SO3 (R = Me or Ph) were obtained from Ag[CF3SO3] and tripod telluroether. In contrast, a similar reaction with 2 molar equiv of MeC(CH2SeMe)3 afforded only the 1:1 complex [Ag(MeC(CH2SeMe)3)]CF3SO3. The structure of this species (C9H18AgF3O3SSe3, a = 8.120(3) A, b = 15.374(3) A, c = 14.071(2) A, beta = 93.86(2) degrees, monoclinic, P2(1)/n, Z = 4) reveals a distorted trigonal planar geometry at Ag(I) derived from one bidentate selenoether and one monodentate selenoether. These units are then linked to adjacent Ag(I) ions to give a one-dimensional linear chain cation.     

Tuning charge recombination rate constants through inner-sphere coordination in a copper(I) donor-acceptor compound

The coordination compounds [Cu(bpy-MV2+)(PPh3)2](PF6)3, where bpy-MV2+ is the 1-(4-(4'-methyl-2,2'-bipyridin-4-yl)butyl)-1'-methyl-4, 4'-bipyridinediium(2+) cation, and [Cu(dmb)(PPh3)2](PF6), where dmb is 4,4'-dimethyl-2,2'-bipyridine, have been prepared and characterized. Visible light (417 nm) excitation of [Cu(bpy-MV2+)(PPh3)2]3+ at room temperature leads to rapid intramolecular electron transfer, kcs > 1 x 10(8) s-1, to form a charge-separated state with an electron localized on the pendant viologen group and a copper(II) metal center, abbreviated [CuII-bpy-MV.+]. This state recombines to ground-state products with first-order rate constants that can be tuned with solvent over a approximately 10(7)-10(5) s-1 range. The activation parameters were determined from temperature-dependent electron-transfer data with Arrhenius analysis. A model is proposed wherein a solvent molecule is coordinated to Cu(II) in the charge-separated state, [(S)CuII-bpy-MV.+]. Visible light excitation of [Cu(dmb)(PPh3)2](PF6) in argon-saturated dichloromethane produces long-lived photoluminescent excited states, tau = 80 ns, that are dynamically quenched by the addition of Lewis basic solvents. The measured quenching constants each correlate well with the lifetime of the charge-separated state measured after excitation of [Cu(bpy-MV2+)(PPh3)2]3+ in the corresponding solvent.     

Anion-pi interactions as controlling elements in self-assembly reactions of Ag(I) complexes with pi-acidic aromatic rings

Reactions of 3,6-bis(2'-pyridyl)-1,2,4,5-tetrazine (bptz) and 3,6-bis(2'-pyridyl)-1,2-pyridazine (bppn) with the AgX salts (X = [PF6]-, [AsF6]-, [SbF6]-, and [BF4]-) afford complexes of different structural motifs depending on the pi-acidity of the ligand central ring and the outer-sphere anion. The bptz reactions lead to the polymeric [[Ag(bptz)][PF6]]infinity (1) and the dinuclear compounds [Ag2(bptz)2(CH3CN)2][PF6]2 (2) and [Ag2(bptz)2(CH3CN)2][AsF6]2 (3), as well as the propeller-type species [Ag2(bptz)3][AsF6]2 (4) and [Ag2(bptz)3][SbF6]2 (5a and 5b). Reactions of bppn with AgX produce the grid-type structures [Ag4(bppn)4][X]4 (6-9), regardless of the anion present. In 6-9, pi-pi stacking interactions are maximized, whereas multiple and shorter (therefore stronger) anion-pi interactions between the anions and the tetrazine rings are established in 1-5b. These differences reflect the more electron-rich character of the bppn pyridazine ring as compared to the bptz tetrazine ring. The evidence gleaned from the solid-state structures was corroborated by density functional theory calculations. In the electrostatic potential maps of the free ligands, a higher positive charge is present in the bptz as compared to the bppn central ring. Furthermore, the electrostatic potential maps of 3, 4, and 5b indicate an electron density transfer from the anions to the pi-acidic rings. Conversely, upon addition of the [AsF6]- ions to the cation of 7, there is negligible change in the electron density of the central pyridazine ring, which supports the presence of weaker anion-pi interactions in the bppn as compared to the bptz complexes. From the systems studied herein, it is concluded that anion-pi interactions play an important role in the outcome of self-assembly reactions.     

Fluorous biphasic catalysis: synthesis and characterization of copper(I) and copper(II) fluoroponytailed 1,4,7-Rf-TACN and 2,2'-Rf-bipyridine complexes--their catalytic activity in the oxidation of hydrocarbons,olefins, and alcohols,including mechanistic implications

In this contribution on fluorous biphasic catalysis (FBC), we present the synthesis and characterization of new copper complexes, and define their role, as precatalysts, in the FBC oxidation of hydrocarbons, olefins, and alcohols. Thus the previously reported, but poorly characterized, fluoroponytailed ligand, 2,2'-R(f)-bipyridine (R(f)=-(CH(2))(3)C(8)F(17)) 2, as well as the new Cu(II) fluoroponytailed carboxylate synthon complex [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)] 3, will be addressed. Moreover, the reaction of previously described ligands, 1,4,7-R(f)-TACN 1, or 2,2'-R(f)-bipyridine 2 with 3 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-tacn)] 4 and [Cu(C(8)F(17)(CH(2))(2)CO(2))(2)(R(f)-bpy)] 5, respectively. The reaction of 1 with [Cu(CH(3)CN)(4)]PF(6) or [CuCl] provided new Cu(I) complexes, which could be isolated and fully characterized as [Cu(R(f)-tacn)X']X, in which X=PF(6) (6) or X'=Cl (7) (soluble in perfluoroheptane). The Cu(II) and Cu(I) complexes, 4-7, were characterized by elemental analysis, mass spectrometry, and IR, diffuse reflectance UV/Vis, and EPR spectroscopies; complex 7 was also characterized by (1)H and (19)F[(1)H] NMR spectroscopy. Complexes 4 and 5, as well as 6 and 7 generated in situ, were evaluated as precatalysts for hydrocarbon and olefin functionalization. The oxidation reactions of these substrates in the presence of the necessary oxidants, tert-butyl hydroperoxide (TBHP) and oxygen gas, proceeded under FBC conditions for 5, 7, and Cu(I) salts with 2. However, the complexes with ligand 2 could not be recycled, owing to significant ligand dissociation. The Cu(II) complex 4, with the ligand 1, provide the oxidation of 4-nitrobenzyl alcohol to 4-nitrobenzaldehyde under single-phase FBC conditions at 90 degrees C with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxy) and O(2); the precatalyst 4, can be utilized for an additional four catalytic cycles without loss of activity. Plausible mechanisms concerning these FBC oxidation reactions will be discussed.     

A new family of chelating diphosphines with a transition metal stereocenter in the backbone: novel applications of "chiral-at-rhenium" complexes in rhodium-catalyzed enantioselective alkene hydrogenations

The title compounds are accessed by sequences starting with racemic and enantiomerically pure [(eta5-C5H5)Re(NO)(PPh3)(CH3)]. Reactions with chlorobenzene/HBF4, PPh2H, and tBuOK give the phosphido complex [(eta5-C5H5)Re(NO)(PPh3)(PPh2)] (3). Reactions with Ph3C+ BF4-, PPh2H, and tBuOK give the methylene homologue [(eta5-C5H5)Re(NO)(PPh3)(CH2PPh2)] (9). Treatment of 3 or 9 with nBuLi or tBuLi and then PPh3Cl gives the diphosphido systems [(eta5-C5H4PPh2)Re(NO)(PPh3)((CH2)nPPh2)] (n = 0/1, 5/11). Reactions of 5 and 11 with [Rh(NBD)Cl]2/AgPF6 (NBD = norbornadiene) give the rhenium/rhodium chelate complexes [(eta5-C5H4PPh2)Re(NO)(PPh3)((mu-CH2)nPPh2)Rh(NBD)]+ PF6- (n = 0/1, 6+/12+ PF6-; 30-32% overall from commercial Re2(CO)10). The crystal structures of 6+ PF6- and 12+ PF6- are compared to those of 3 and 9, and other rhodium complexes of chelating bis(diphenylphosphines). The chiral pockets defined by the PPh2 groups show unusual features. Four alkenes of the type (Z)-RCH=C(NHCOCH3)CO2R' are treated with H2 (1 atm) and (R)-6+ PF6- or (S)-12+ PF6- (0.5 mol%) in THF at room temperature. Protected amino acids are obtained in 70-98% yields and 93-82% ee [(R)-6- PF6-] or 72-60% ee [(S)-12+ PF6-]. Pressure and temperature effects are defined, and turnover numbers of > 1600 are realized.