纳米Fe3 O4 颗粒的正电子湮没谱学研究

测量了磁性纳米Fe₃O₄颗粒的X射线衍射谱(XRD)、正电子湮没寿命谱(PALS)和符合多普勒展宽谱(CDBS),研究了不同压力和退火温度对磁性纳米Fe₃O₄颗粒物相、电子结构、缺陷及电子动量分布等的影响. XRD,PALS,CDBS测量结果表明:纳米Fe₃O₄颗粒的缺陷浓度随压力的增加而增大,但物相和缺陷类型并未发生变化;磁性纳米Fe₃O_{4< 关键词： 正电子 3}O₄')" href="#">Fe₃O₄ 寿命谱 多普勒展宽谱     

Investigation of the free volume and ionic conducting mechanism of poly（ethylene oxide）-LiClO_4 polymeric electrolyte by positron annihilating lifetime spectroscopy

The positron annihilation lifetime and ionic conductivity are each measured as a function of organophilic rectorite（OREC） content and temperature in a range from 160 K to 300 K.According to the variation of ortho-positronium（o-Ps） lifetime with temperature,the glassy transition temperature is determined.The continuous maximum entropy lifetime（MELT） analysis clearly shows that the OREC and temperature have important effects on o-Ps lifetime and free volume distribution.The experimental results show that the temperature dependence of ionic conductivity obeys the Vogel-Tammann-Fulcher（VTF） and Williams-Landel-Ferry（WLF） equations,implying a free-volume transport mechanism.A linear least-squares procedure is used to evaluate the apparent activation energy related to the ionic transport in the VTF equation and several important parameters in the WLF equation.It is worthwhile to notice that a direct linear relationship between the ionic conductivity and free volume fraction is established using the WLF equation based on the free volume theory for nanocomposite electrolyte,which indicates that the segmental chain migration and ionic migration and diffusion could be explained by the free volume theory.     

掺镧PbWO4闪烁晶体的缺陷研究

利用正电子湮没寿命谱(PAT)和X射线电子能谱(XPS)研究了掺镧所引起的PbWO₄ 晶体缺陷的变化.结果表明：掺镧后,PbWO₄晶体中的正电子捕获中心铅空位(V< sub>Pb)浓度增加,并进一步诱导低价氧浓度的增加.讨论了掺La的作用机制,认为掺 La将抑制晶体中的氧空位,增加铅空位浓度. 关键词： 掺镧钨酸铅晶体 正电子湮没寿命谱 X射线电子能谱 缺陷     

Au/SiO2纳米复合薄膜的微结构及光吸收特性研究

用多靶磁控溅射技术制备了Au/SiO₂纳米多层薄膜.利用透射电子显微镜以及吸 收光谱对Au/SiO₂复合薄膜的微观结构、表面形貌及光学性能进行了表征和测试 .研究结果表明：单层Au/SiO₂薄膜中Au沉积时间小于10s时，分散在SiO_{2< /sub>中的Au颗粒随Au的沉积时间的延长而增大；当沉积时间超过10s后，Au颗粒的尺寸几乎 不随沉积时间变化，但Au颗粒的形状由网络状结构变为薄膜状结构.［Au(t1关键词： 尺寸效应 纳米复合薄膜 吸收光谱 有效媒质理论}     

MoO3/Al2O3催化剂中Mo分散的正电子研究

用浸渍法制备了一系列不同Mo含量的MoO₃/Al₂O₃催化剂.测量了这些样品的正电子湮没寿命谱(PALS)与符合多普勒展宽(CDB)谱,以研究其孔洞结构以及Mo分散.正电子寿命测量结果表明,Al₂O₃载体中存在两种不同尺寸的孔洞.掺入MoO₃之后,Mo原子主要进入Al₂O₃的大孔中,使孔洞体积减小.符合多普勒展宽谱结果表明,当MoO 关键词： 3/Al₂O₃催化剂')" href="#">MoO₃/Al₂O₃催化剂 正电子湮没寿命谱 符合多普勒展宽 Mo 分散     

1,2-丙二醇辅助溶胶凝胶法制备NASICON型Li1.3Al0.3Ti1.7(PO4)3固体电解质

通过1,2-丙二醇辅助的溶胶凝胶方法制备了具有NASICON结构的固体锂离子导体Li_1.3Al_0.3Ti_1.7(PO₄)₃,并且通过热重/差热分析、X射线衍射分析、比表面观测、电化学阻抗谱以及计时电流法等对其各方面性能进行了表征. 通过使用1,2-丙二醇辅助方法,未额外添加络合剂,也未对pH值进行调整得到均匀的溶胶前驱体,并且通过在850～950oC不同高温段烧结得到无杂相的具有NASICON结构     

KAg4I5-AgI复合体系的电导率研究

采用固相反应法将市购的AgI和KI按4.1 ∶1的摩尔组分配比,在避光干燥的条件下混合加热,制备出了KAg₄I₅ (10%AgI )复合体系.用X射线衍射谱、扫描电子显微镜、复阻抗谱、差示扫描量热等分析手段,对复合体系的结构、形貌、离子导电特性及相变温度进行了研究.结果发现,两相均为快离子导体的材料复合后,其复合体系的离子电导率比各自为纯相时都高,并且升降温-电导率曲线为迟滞回线,AgI的升降温相变温度分别滞后5和10 ℃.用界面间相互作用、空间电荷模型及Gou 关键词： 离子电导率 电化学势 空间电荷区 相变温度     

Fe3O4-C核壳型纳米纤维的正电子研究

利用正电子手段研究新型多功能材料Fe₃O₄-C 纳米管核壳结构纳米纤维的内部电子结构,通过测量和分析正电子湮没寿命谱和符合双多普勒展宽谱,发现在这种材料中部分正电子在Fe₃O₄内部的单空位中发生湮灭,部分正电子在Fe₃O₄的微空洞中发生湮灭,部分正电子在壳层碳纳米管中湮灭.并估算了各个部分的湮灭比例,在一定程度上揭示了Fe₃O₄-C 关键词： 正电子 纳米纤维 寿命 符合多普勒     

Co:BaTiO3/Si(100)纳米复合薄膜制备、微结构及其紫外光电子能谱研究

采用脉冲激光气相沉积(PLD)方法,在Si(100)晶面上制备了Co:BaTiO₃纳米复合薄膜.采用X射线衍射(XRD)结合透射电镜(TEM)方法研究了两种厚度Co:BaTiO₃纳米复合薄膜的晶体结构,当薄膜厚度约为30 nm时,薄膜为单一择优取向;当薄膜厚度约为100nm时,薄膜呈多晶结构.原子力显微镜(AFM)分析表明,当膜厚为30nm时,薄膜呈现明显的方形晶粒.采用紫外光电子能谱(UPS)研究了Co的价态和Co:BaTiO₃纳米复合薄 关键词： 3')" href="#">BaTiO₃ 纳米复合薄膜 紫外光电子能谱     

非晶纳米发光材料(Y,Eu)2O3-SiO2发射光谱的分析研究

EXAFS测定表明sol-gel方法制备的纳米非晶(Y,Eu)₂O₃-SiO₂发光材料中,发光中心Eu³⁺的局域环境和晶态X₂型Y₂SiO₅Eu中Eu³⁺离子的局域环境相似。以此结构为依据,用M. F. Reid的方案计算了晶场迭加模型中的能级参数及光谱强度参数,并得到了与实验结果基本一致的理论光谱图.     

A computer simulation study of ionic conductivity in polymer electrolytes

In this paper we present a computer simulation study of ionic conductivity in solid polymeric electrolytes. The multiphase nature of the material is taken into account. The polymer is represented by a regular lattice whose sites represent either crystalline or amorphous regions with the charge carrier performing a random walk. Different waiting times are assigned to sites corresponding to the different phases. A random walk (RW) is used to calculate the conductivity through the Nernst-Einstein relation. Our walk algorithm takes into account the reorganization of the different phases over time scales comparable to time scales for the conduction process. This is a characteristic feature of the polymer network. The qualitative nature of the variation of conductivity with salt concentration agrees with the experimental values for PEO-NH₄I and PEO-NH₄SCN. The average jump distance estimated from our work is consistent with the reported bond lengths for such polymers.     

Structure, microstructure and ionic conductivity of the solid solution LiTi2−xSnx(PO4)3

The Nasicon compounds with the composition LiTi_2−xSn_x(PO₄)₃ (x=0-1.8) were synthesised by the solid state reaction. Their structures were determined from X-ray powder diffraction using Rietveld analysis. All the compositions present the space group R-3c. The refinements show that the Ti and Sn cations are statistically distributed over the same position while the Li ones are exclusively located on the M1 site. The lattice constants a and c exhibit linear variation over the whole composition range. The bond lengths are in accordance with those of other Nasicon structures. The SEM micrographs of the samples show relative porous microstructures. The ionic conductivity is about 10⁻⁴-10⁻⁵ S cm⁻¹; for the activation energy, a typical value of 0.32 eV is obtained for x=0.6 composition whereas significant deviation from linearity in the temperature dependence of the dc conductivity, is observed for the Sn-rich ones. This tendency is discussed along with the structural features.     

The effect of composition,electron irradiation and quenching on ionic conductivity in a new solid polymer electrolyte: (PEG)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>NH<Subscript>4</Subscript>I

We have prepared, characterized and investigated a new PEG-2000 based solid polymer electrolyte (PEG) _x NH₄I. Ionic conductivity measurements have been made as a function of salt concentration as well as temperature in the range 265–330 K. Selected compositions of the electrolyte were exposed to a beam of 8 MeV electrons to an accumulated dose of 10 kGy to study the effect on ionic conductivity. The electrolyte samples were also quenched at liquid nitrogen temperature and conductivity measurements were made. The ionic conductivity at room temperature exhibits a characteristic double peak for the composition x = 20 and 70. Both electron beam irradiation and quenching at low temperature have resulted in an increase in conductivity by 1–2 orders of magnitude. The enhancement of conductivity upon irradiation and quenching is interpreted as due to an increase in amorphous region and decrease in crystallinity of the electrolyte. DSC and proton NMR measurements also support this conclusion.      

Ionic conductivity of PVdF-co-HFP/LiClO4 in terms of free volume defects probed by positron annihilation lifetime spectroscopy

ABSTRACT

Polymers based on ionic conducting materials have important interest because of their potential applications in polymer electrolytes and membranes for fuel cell application. PVdF-co-HFP poly(viniliden-co-hexafluoropropylene) was chosen as a polymer matrix because of its high ionic conductivity and better mechanical properties. Polymer matrix composites were prepared with various amounts of LiClO₄ salt by a solution casting method. The sample-ionic conductivity measurements were recorded by AC impedance analyzer at different frequencies from 0.1?Hz to 20?MHz and at different temperatures from 273 to 373?K.

The changes of nanoscopic free volume and free volume fraction in these materials were investigated in terms of temperature from 273 to 373?K using Positron Annihilation Lifetime Spectroscopy (PALS) and Simha-Somcynsky (SS) Hole Theory. The free volume had a bump at about 3% in weight percentage of the salt and there is a slight increase after 10%. The effects of weight percentages of LiClO₄ and temperature were investigated. The mechanism of the ac ionic conductivity was presented in terms of the free volume models, however thermo-occupancy function justifies the best accurate representation of the data.     

Investigations on the effect of complexation of NaF salt with polymer blend (PEO/PVP) electrolytes on ionic conductivity and optical energy band gaps

Sodium ion conducting polymer blend electrolyte films, based on polyethylene oxide (PEO) and polyvinyl pyrrolidone (PVP) complexed with NaF salt, were prepared using solution casting technique. The complexation of the salt with the polymer blend was confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-vis spectroscopy. Electrical conductivity of the films was measured with impedance analyzer in the frequency range of 1 Hz to 1 MHz and in the temperature range of 303-348 K. It was observed that the magnitude of conductivity increased with the increase in the salt concentration as well as the temperature. UV-vis absorption spectra in wavelength region of 200-800 nm were used to evaluate the optical properties like direct and indirect optical energy band gaps, optical absorption edge. The optical band gaps decreased with the increase in Na⁺ ion concentration. This suggests that NaF, as a dopant, is a good choice to improve the electrical properties of PEO/PVP polymer blend electrolytes.     

On the power-law behavior of the AC conductivity of the mixed crystal (NH4)3H(SO4)1.42(SeO4)0.58

A power law used to describe the AC conductivity from 299 to 393 K of the mixed crystal (NH₄)₃H(SO₄)_1.42(SeO₄)_0.58 led to fractional exponent values ranging from 1.08 to 0.91, depending on structural changes induced on temperature variation [B. Louati, M. Gargouri, K. Guidara and T. Mhiri, J. Phys. Chem. Solids 66 (2005) 762]. In the present note, we suggest that the fractional law exhibits features of lattice relaxation. Despite the structural changes, the parameters of the power law are mutually interconnected to yield a temperature independent phenomenon. Such behavior is probably of general validity and characterizes the universal fractional dispersion of the AC conductivity, as it was also observed in glasses of different composition.     

Studies of ionic conductivity and structural phase transitions of Na3H(SO4)2 crystal

The complex electrical impedance of Na₃H(SO₄)₂ along the b_m-axis has been measured from 25°C to 316°C in the frequency range 4 kHz–40 MHz. The temperature dependence of the electrical conductivity shows remarkable changes in the temperature range 160°C–260°C. The sample crystal becomes a fast ionic conductor above 260°C. The conduction mechanisms of proton and sodium ions in the different phases are analyzed in detail with respect to the structural features of the sample crystal.     

Mesoporous silica (MCM-41) effect on (PEO + LiAsF6) solid polymer electrolyte

Composite polymer electrolyte films consisting of polyethylene oxide (PEO), LiAsF₆ and mesoporous silica (MCM-41) with fixed PEO/LiAsF₆ = 90/10 but different weight percent ratios of MCM-41 were prepared using the solution casting method. The polymer electrolyte films were characterized using XRD, DSC, SEM and electrical impedance spectroscopy. In corporation of MCM-41 in a (PEO + LiAsF₆) polymer electrolyte facilitates salt dissociation, enhances ion conductivity, and improves miscibility between organic and inorganic moieties. The scanning electron microscopy (SEM) photographs indicates the electrolytes are miscible and homogeneous up to 10 wt.% of MCM-41, and an optimized conductivity is found at this composition (10 wt.%). However, at higher weight ratios (>10 wt.%), the Li/MCM-41-rich domain developed, and the conductivity decreased with increasing mesoporous material. The electrochemical performance of fabricated electrochemical cells of configuration Li/(PEO + LiAsF₆ + MCM-41)/(MoO₃ + C + PTFE) were investigated.