Synthesis and photophysical evaluation of charge neutral thiourea or urea based fluorescent PET sensors for bis-carboxylates and pyrophosphate

The synthesis of the fluorescent photoinduced electron transfer (PET) chemosensors 1-3 for bis-anions such as bis-carboxylates and pyrophosphate in organic solvents is described herein. These sensors are based on the receptor-spacer-fluorophore-spacer-receptor motif where the receptors are charge neutral aromatic thiourea or urea receptors and the fluorophore is anthracene. The anion recognition was evaluated using 1H NMR as well as absorption and fluorescence spectroscopy in DMSO. For simple anions such as acetate or fluoride, the recognition was shown to be through hydrogen bonding of the corresponding anion to the receptors. This gave rise to only minor changes in the absorption spectra, but significant changes in the fluorescence emission spectra, which was substantially (70-95%) quenched. Analysis of these recognition events implied a 1 : 2 (sensor : anion) binding and ideal PET behaviour for ions such as AcO- and H2PO4-. For F-, the luminescent quenching indicated a 1 : 1 binding, but we deduced that this was due more to complete quenching of the excited state after the addition of one equivalent of the anion. For all of the anions, the quenching contributed to enhanced efficiency of PET from the receptors to the excited state of the fluorophore. In the case of the bis-anions (ambient), such as di-carboxylates, similar fluorescence quenching was observed. However, here either a 1 : 1 or a 1 : 2 binding was observed depending on the length of the spacer separating the two carboxylate moieties and the nature of the receptor. Whereas both pyrophosphate and malonate gave rise to a 1 : 1 binding, glutarate gave rise to approximately 1 : 2 binding for the thiourea sensors 1 and 2. However, for the urea based sensor 3, the binding was found to be 1 : 1 for all the bis-anions. For such a 1 : 1 binding we propose that the anion most likely bridges the fluorophore moiety. This was also evident from the 1H NMR (DMSO-d6) spectrum where the anthracene resonances were significantly affected. By simply modifying the electronic structure of the receptor, the sensitivity of the recognition process could also be modified; e.g. compound 1, bearing the trifluoromethyl substituent, showed stronger binding to the bis-anions than 2, which possessed a simple phenyl moiety.     

Modular functional integration of a two-input INH logic gate with a fluorophore-spacer-receptor1-spacer-receptor2 conjugate

The synthesis and photophysical characterization of a fluorophore-spacer-receptor 1-spacer-receptor 2 system, which combines the 1,8-naphthalimide fluorophore with amine and urea receptor units, is reported. Photoinduced electron transfer (PET) from the amino group was blocked by protonation, leading to a drastic fluorescence enhancement (ca. 20 times). Interaction of the urea receptor with anions (F (-), AcO (-), H 2PO 4 (-)) via hydrogen bonding or urea NH deprotonation resulted in significant fluorescence quenching of the 1,8-naphthalimide chromophore in an appropriately chosen model compound (ca. 30-45%). In the presence of both chemical input species, protons and anions, the fluorescence was also quenched. The binding of the anions by NH (+) ammonium receptor has been assumed. The apparent anion binding constants of the protonated conjugate follow the basicity trend of the anions: AcO (-) approximately F (-) > H 2PO 4 (-). The investigated system constitutes an example for the flexible and modular realization of functionally integrated INH logic at the molecular level, using protons and anions as chemical input species and the fluorescence of a PET-active signaling unit as output.     

Ion Interactions with a New Ditopic Naphthalimide‐Based Receptor: A Photophysical,NMR and Theoretical (DFT) Study

A new multi‐component chemosensor system comprising a naphthalimide moiety as fluorophore is designed and developed to investigate receptor–analyte binding interactions in the presence of metal and non‐metal ions. A dimethylamino moiety is utilized as receptor for metal ions and a thiourea receptor, having acidic protons, for binding anions. The system is characterized by conventional analytical methods. The absorption and fluorescence spectra of the system consist of a broad band typical for an intramolecular charge transfer (ICT). The effects of various metal‐ion additives on the spectral behavior of the present sensor system are examined in acetonitrile. It is found that among the metal ions studied, alkali/alkaline earth‐metal ions and transition‐metal ions modulate the absorption and fluorescence spectra of the system. As an additional feature, the anion signaling behavior of the system in acetonitrile is studied. A decrease in fluorescence efficiency of the system is observed upon addition of fluoride and acetate anions. Fluorescence quenching is most effective in the case of fluoride ions. This is attributed to the enhancement of the photoinduced electron transfer from the anion receptor to the fluorophore moiety. Hydrogen‐bond interactions between the acidic NH protons of the thiourea moiety and the F^? anions are primarily attributed to the fluoride‐selective signaling behavior. Interestingly, a negative cooperativity for the binding event is observed when the interactions of the system are studied in the presence of both Zn²⁺ and F^? ions. NMR spectroscopy and theoretical calculations are also carried out to better understand the receptor–analyte binding.     

N-amidothiourea based PET chemosensors for anions

Neutral N-amidothiourea based PET anion sensors bearing a pyrene fluorophore, 1-3, were synthesized and their fluorescent response toward anions was assessed. The anion quenching and binding constants were found to be much higher than those of the corresponding PET sensors bearing a simple thiourea receptor despite a higher oxidation potential of the electron donor and a relatively longer spacer (CH(2))(3) between the signal reporter and binding receptor in 1-3. This was explained in terms of a much more substantial increase in the electron donating ability of amidothiourea upon anion binding.     

Fluorescent sensing of anions with acridinedione based neutral PET chemosensor

Newly synthesised fluorescent chemosensor ADDTU contains the thiourea receptor connected to the acridinedione (ADD) fluorophore via a covalent bond, giving rise to a fluorophore-receptor motif. In this fluorescent chemosensor, the anion recognition takes place at the receptor site which result in the concomitant changes in the photophysical properties of a ADD fluorophore by modulation of photoinduced electron transfer (PET) process. The binding ability of these sensor with the anions F(-), Cl(-), Br(-), I(-), HSO(4)(-), ClO(4)(-), AcO(-), H(2)PO(4)(-) and BF(4)(-) (as their tetrabutylammounium salts) in acetonitrile were investigated using UV-vis, steady state and time-resolved emission techniques. ADDTU system allows for the selective fluorescent sensing of AcO(-), H(2)PO(4)(-) and F(-) over other anions in acetonitrile.     

Fluorescent sensing of pyrophosphate and bis-carboxylates with charge neutral PET chemosensors

[reaction: see text] The fluorescent photoinduced electron transfer (PET) chemosensors 2 and 3 were designed for the recognition of anions possessing two binding sides such as dicarboxylates and pyrophosphate; the anion recognition in DMSO takes place through the two charge neutral thiourea receptor sites with concomitant PET quenching of the anthracene moiety. The anion binding of acetate, phosphate, and pyrophosphate to 2 and 3 was also evaluated by using 1H NMR in DMSO-d6.     

Selective fluorescent PET sensing of fluoride (F) using naphthalimide-thiourea and -urea conjugates

The thiourea and urea functionalised 4-amino-1,8-naphthalimide sensors 1-3, based on the fluorophore-spacer-receptor principle, were synthesised in high yield in three steps. The sensors were shown to signal selectively the detection of fluoride in the fluorescence emission spectrum in DMSO. On all occasions the emission was quenched due to enhanced photoinduced electron transfer quenching (PET) from the receptor to the excited state of the fluorophore upon recognition of F⁻, particularly for the thiourea sensors 1 and 2. In comparison, the changes in the absorption spectra were minor for all three, even after the addition of 80-100 equiv of F⁻. The sensing of acetate or dihydrogenphosphate gave rise to only ∼5-20% quenching.     

Coumarin-strapped calix[4]pyrrole: a fluorogenic anion receptor modulated by cation and anion binding

A new strapped calix[4]pyrrole containing a fluorophore as part of the strap has been synthesized and characterized. Association constants with various anions have been determined using both fluorescence titration and isothermal titrations calorimetry (ITC). The two sets of association constants were found to be in good agreement with one another. The fluorescence emission properties of this new receptor could be controlled by addition of Na+ (or H2O) and anions. However, the fluorescence quenching by anions is only observed in the presence of Na+ (or H2O). All the experimental evidence is consistent with the notion that independent PET processes are modulated by separate cation and anion recognition events. As such, this system operates as an elementary logic gate wherein anion and cation concentrations serve as the input and fluorescence intensity changes provide the output.     

Anion recognition and sensing in organic and aqueous media using luminescent and colorimetric sensors

This review article focuses primarily on the work carried in our laboratories over the last few years using luminescent and colorimetric sensors, where the anion recognition occurs through hydrogen bonding in organic or aqueous solvents. This review begins with the story of the discovery of fluorescent photoinduced electron transfer (PET) sensors for anions using charged neutral urea or thiourea receptors where both fluorescent and NMR spectroscopic methods monitored anion recognition. This work led to the development of dual luminescent and colorimetric anion sensors based on the use of the ICT based naphthalimide chromophore, where ions such as fluoride gave rise to changes in both the fluorescence and the absorption spectra of the sensors, but at different concentrations. Here, the former changes were due to hydrogen bonding interactions, whereas the latter was due to the deprotonation of acidic protons, giving rise to the formation of the bifluoride anion (HF₂⁻). Modification of the 4-amino-l,8-naphthalimide moiety has facilitated the formation of colorimetric anion sensors that work both in organic or aqueous solutions. Such charge neutral receptor motifs have also been incorporated into organic scaffolds with norbomyl and calixarene backbones, which have enabled us to produce anion directed self-assembled structures.     

A unique NH-spacer for N-benzamidothiourea based anion sensors. Substituent effect on anion sensing of the ICT dual fluorescent N-(p-dimethylaminobenzamido)-N'-arylthioureas

A series of N-(p-dimethylaminobenzamido)-N'-(substituted-phenyl)thioureas (substituent = p-CH3, H, p-Cl, p-Br, m-Br, m-NO2, and p-NO2) were designed as anion sensors in order to better understand the -NH-spacer via a substituent effect investigation. In these molecules the dual fluorescent intramolecular charge transfer (ICT) fluorophore p-dimethylaminobenzamide as the signal reporter was linked to the anion-binding site, the thiourea moiety, via an N-N single bond. Correlation of the NMR signals of the aromatic and -NH protons with substituents in these molecules indicated that the N-N single bond stopped the ground-state electronic communication between the signal reporter and the anion-binding site. Dual fluorescence was observed in highly polar solvents such as acetonitrile with the former five derivatives. The fact that the CT emission wavelength and the CT to LE emission intensity ratio of the sensors were independent of the substituent existing in the anion-binding moiety suggested that the substituent electronic effect could not be communicated to the CT fluorophore in the excited-state either. Yet in acetonitrile both the CT dual fluorescence and the absorption of the sensors were found to be highly sensitive toward anions. A conformation change around the N-N bond in the sensor molecules was suggested to occur upon anion binding that established the electronic communication between the signal reporter and the anion-binding site. The anion binding constants of the N-(p-dimethylaminobenzamido)thiourea sensors were found higher than those of the corresponding traditional N-phenylthiourea counterparts and the substituent effect on the anion binding constant was much higher than that in the latter. "-NH-" was shown to be a unique spacer that affords N-benzamidothiourea allosteric anion sensors.     

基于咪唑的荧光传感器对磷酸二氢根离子的高选择性识别

设计并合成了基于咪唑基团的高选择性的荧光传感器, 分别利用荧光和紫外-可见光谱研究了其对阴离子的识别. 结果显示, 该类荧光传感器只在H₂PO₄^-离子存在下发生显著的荧光猝灭现象, 并且产生一个新的荧光发射峰, 因此可用于乙腈溶液中H₂PO₄^-的快速有效检测.     

A novel colorimetric and fluorescent anion chemosensor based on the flavone quasi-crown ether-metal complex

The metal-ligand complex 1 ([Mg (L)] (2+)) (or 2 ([Ca (L)]( 2+))) was demonstrated to selectively bind HSO(4)(-) (or H(2)PO(4)(-)) over other anions by using UV-vis absorption and fluorescence spectroscopy. The studied complex exhibits the remarkable color change and fluorescence quenching upon introducing HSO(4)(-) (or H(2)PO(4)(-)) anion in acetonitrile. Both the mechanism and structure of the secondary complex of complex 1 with anion were proposed on the basis of theoretical computation.     

Development of N-benzamidothioureas as a new generation of thiourea-based receptors for anion recognition and sensing

A series of neutral N-(substituted-benzamido)-N'-phenylthioureas (substituent = p-OC(2)H(5), p-CH(3), m-CH(3), H, p-Cl, p-Br, m-Cl, and p-NO(2)) were designed as anion receptors, in which the thiourea binding site was attached to the benzamido moiety via an N-N bond. The absorption spectra of these N-benzamidothioureas in acetonitrile peaked at ca. 270 nm were found to show unprecedented red shifts by 7 373 to 14 325 cm(-1) in the presence of anions such as AcO(-), F(-), and H(2)PO(4)(-). Under the same conditions, the classic neutral thiourea receptors, N-(substituted-phenyl)-N'-phenylthioureas, showed absorption spectral shifts in most cases of less than 800 cm(-1) with one exception of 6501 cm(-1). Control experiments, effects of protic solvent, and (1)H NMR titration confirmed the formation of hydrogen-bonding complexes between the new N-benzamidothiourea receptors and anions. The binding constants with AcO(-), for example, are at 10(5)-10(7) mol(-1) L order of magnitude, which are 13 to 590 times those of the corresponding classic N-phenylthioureas in the same solvent. It was found that, whereas the absorption of the N-benzamidothiourea receptors showed essentially no dependence on the substituent, the substantially red-shifted new absorption band of the N-benzamidothiourea-anion binding complex was sensitively subject to the substituent. A linear relationship was found between the absorption energies of the N-benzamidothiourea-acetate binding complexes and the Hammett constants of the substituents with a negative slope of -0.34 eV. This led to the assignment that the substantially red-shifted absorption band was the ground-state intramolecular charge-transfer absorption with the substituent locating in the electron acceptor moiety. It was concluded that anion binding to the thiourea moiety of the N-benzamidothiourea receptors switched on their ground-state charge transfer. An anion-binding induced structural change was suggested to occur around the N-N bond in N-benzamidothioureas, which resulted in a substantially increased electron donating ability of the electron donor in the receptor molecules. As a consequence, the ground-state charge transfer takes place in the N-benzamidothiourea-anion binding complexes, leading to unprecedented red shifts in the absorption spectra and substantially enhanced anion binding affinities than those of the corresponding N-phenylthiourea receptors. N-Benzamido-N'-phenylthioureas represent a new generation of neutral thiourea-based anion receptors that show substantially improved anion binding performance important for anion sensing and recognition.     

Enantioselective fluorescent sensor for dibenzoyl tartrate anion based on chiral binaphthyl derivatives bearing an amino acid unit

The fluorescent photoinduced electron transfer (PET) chemosensors 1–3 based on (S)-1,1′-bi-2-naphthol were designed for their recognition of dibenzoyl tartrate anions. The binding properties for hydroxy acid anions were examined by the fluorescence and ¹H NMR spectra. The results indicated that receptor 1 exhibit excellent enantioselectivity toward the enantiomers of dibenzoyl tartrate anion.     

Selective recognition of fluoride and acetate by a newly designed ruthenium framework: experimental and theoretical investigations

An effective anion sensor, [Ru(II)(bpy)(2)(H(2)L(-))](+) (1(+)), based on a redox and photoactive {Ru(II)(bpy)(2)} moiety and a new ligand (H(3)L = 5-(1H-benzo[d]imidazol-2-yl)-1H-imidazole-4-carboxylic acid), has been developed for selective recognition of fluoride (F(-)) and acetate (OAc(-)) ions. Crystal structures of the free ligand, H(3)L and [1](ClO(4)) reveal the existence of strong intramolecular and intermolecular hydrogen bonding interactions. The structure of [1](ClO(4)) shows that the benzimidazole N-H of H(2)L(-) is hydrogen bonded with the pendant carboxylate oxygen while the imidazole N-H remains free for possible hydrogen bonding interaction with the anions. The potential anion sensing features of 1(+) have been studied by different experimental and theoretical (DFT) investigations using a wide variety of anions, such as F(-), Cl(-), Br(-), I(-), HSO(4)(-), H(2)PO(4)(-), OAc(-) and SCN(-). Cyclic voltammetry and differential pulse voltammetry established that 1(+) is an excellent electrochemical sensor for the selective recognition of F(-) and OAc(-) anions. 1(+) is also found to be a selective colorimetric sensor for F(-) or OAc(-) anions where the MLCT band of the receptor at 498 nm is red shifted to 538 nm in the presence of one equivalent of F(-) or OAc(-) with a distinct change in colour from reddish-orange to pink. The binding constant between 1(+) and F(-) or OAc(-) has been determined to be logK = 7.61 or 7.88, respectively, based on spectrophotometric titration in CH(3)CN. The quenching of the emission band of 1(+) at 716 nm (λ(ex) = 440 nm, Φ = 0.01 at 298 K in CH(3)CN) in the presence of one equivalent of F(-) or OAc(-), as well as two distinct lifetimes of the quenched and unquenched forms of the receptor 1(+), makes it also a suitable fluorescence-based sensor. All the above experiments, in combination with (1)H NMR, suggest the formation of a 1:1 adduct between the receptor (1(+)) and the anion (F(-) or OAc(-)). The formation of 1:1 adduct {[1(+)·F(-)] or [1(+)·OAc(-)]} has been further evidenced by in situ ESI-MS(+) in CH(3)CN. Though the receptor, 1(+), is comprised of two N-H protons associated with the coordinated H(2)L(-) ligand, only the free imidazole N-H proton participates in the hydrogen bonding interactions with the incoming anions, while the intramolecularly hydrogen bonded benzimidazole N-H proton remains intact as evidenced by the crystal structure of the final product (1). The hydrogen bond mediated anion sensing mechanism, over the direct deprotonation pathway, in 1(+) has been further justified by a DFT study and subsequent NBO analysis.     

Fluorescence spectroscopic evidence for hydrogen bonding and deprotonation equilibrium between fluoride and a thiourea derivative

Interaction of anions with thiourea-linked acridinedione fluorophore was studied by absorption, (1)H NMR, steady-state and time-resolved fluorescence techniques. Addition of AcO(-) and H(2)PO(4)(-) shows a genuine H-bonded complex with thiourea receptor; whereas, F(-) shows stepwise H-bonding and deprotonation of thiourea NH as confirmed by (1)H NMR titration. Free receptor 1 shows emission maximum at 418 nm; whereas, H-bonded complex of 1·F(-) shows a new redshifted emission maximum at 473 nm and the deprotonated 1 exhibits an emission peak at 502 nm. Presence of these three different emitting species was probed by 3D emission spectroscopic studies. Equilibrium between the free receptor 1, 1·F(-) H-bonded complex and deprotonated 1 was confirmed by time-resolved fluorescence studies. Time-resolved area normalised emission spectra (TRANES) of 1 in the presence of F(-) shows two isoemissive points at 456 and 479 nm between time delays of 0-0.5 ns and 1-20 ns, respectively, due to the existence of three emitting species in equilibrium. Observation of such an equilibrium based on fluorescence spectroscopic studies further proves the earlier reported absorption and (1)H NMR spectroscopic studies of H-bonding and deprotonation processes and also illustrates the dynamics of anion-receptor interactions.     

UV–vis and fluorescence detection by receptors based on an isophthalamide bearing a phenylethynyl group

We have successfully prepared 5-(2-phenylethynyl)isophathalilc acid as a signaling unit and the corresponding derivatives for an anion receptor 2 and a barbiturate receptor 4. Receptor 2 showed characteristic UV–vis changes and dramatic fluorescence quenching upon the addition of anions and receptor 4 showed UV–vis and an OFF-ON fluorescence changes upon the addition of dibutylbarbituric acid based on the diphenylethyne moiety.     

Fluorescent sensing of anions based on excited state intramolecular proton transfer in <Emphasis Type="Italic">N</Emphasis>-(3-hydroxy-2-naphthamido)-<Emphasis Type="Italic">N</Emphasis>′-phenylthiourea

A neutral N-amidothiourea-based excited state intramolecular proton transfer (ESIPT) anion receptor bearing an o-hydroxynaphthamide fluorophore and a thiourea binding site, N-(3-hydroxy-2-naphthamide)-N′-phenylthiourea (1a), was designed and synthesized. Fluorescence and absorption response of 1a toward anions were assessed in acetonitrile. IR and NMR experiments indicated that the “OH⋯O=C” intramolecular hydrogen bond (IHB) in 1a was weak so that it only exhibited the short-wavelength normal emission other than ESIPT fluorescence. Due to the high anion binding affinity of the N-amidothiourea binding site and the formation of a hydrogen binding network in the 1a-anion complex, 1a underwent structural change upon anion binding that strengthens the “OH⋯O=C” IHB, leading to the ESIPT and the observation of the long-wavelength ESIPT emission whereas the normal fluorescence is quenched. On the basis of NMR and fluorescence titrations and control experiments with model compounds, a sensing mechanism of the anion-binding-induced ESIPT was proposed. Supported by the National Natural Science Foundation of China (Grant Nos. 20425518, 20675069 & 20835005) and the National Fund for Fostering Talents of Basic Science (Grant No. J0630429)     

Dual responsive chemosensors for anions: the combination of fluorescent PET (Photoinduced Electron Transfer) and colorimetric chemosensors in a single molecule

The design and synthesis of two novel fluorescent PET anion sensors is described, based on the principle of ‘fluorophore-spacer-(anion)receptor’. The sensors 1 and 2 employ simple diaromatic thioureas as anion receptors, and the fluorophore is a naphthalimide moiety that absorbs in the visible part of the spectrum and emits in the green. Upon recognition of anions such as F⁻ and AcO⁻ in DMSO, the fluorescence emission of 1 and 2 was ‘switched off’, with no significant changes in the UV-vis spectra. This recognition shows a 1:1 binding between the receptor and the anions. In the case of F⁻, further additions of the anion, gave rise to large changes in the UV-vis spectra, where the λ_max at 455 nm was shifted to 550 nm. These changes are thought to be due to the deprotonation of the 4-amino moiety of the naphthalimide fluorophore. This was in fact found to be the case, using simple naphthalimide derivatives such as 6. Sensors 1 and 2 can thus display dual sensing action; where at low concentrations, the fluorescence emission is quenched, and at higher concentrations the absorption spectra are modulated.