Preconcentration and Determination of Toxic Metals by A New Calix[4]arene Bonded HPLC Column

The present study deals with the preconcentration and determination of toxic metal ions using p-tetranitrocalix[4]arene (3) appended silica-based new HPLC column. The synthesized material was characterized using Fourier transform infrared and scanning electron microscopy techniques. The sorption characteristics of the HPLC column were investigated for three toxic metals (Cd²⁺, Hg²⁺ and Pb²⁺) in column agreement. The experiments were performed in five steps that were monitored using a UV–visible diode-array detector. However, all the HPLC experimental results were reconfirmed by using atomic absorption spectrophotometer. The effect of concentration on the sorption efficiency of the column was evaluated for all the three metals and the data obtained were investigated using Langmuir, Freundlich and Dubinin–Redushkevich (D–R) sorption isotherms. The value of coefficient of determination (R ²), i.e. 0.99, suggested that the Freundlich sorption isotherm was found to be the best-fit model for all the three toxic metal ions, whereas, mean free energy was calculated from the D–R isotherm as 5.3, 5.7, and 5.8 kJ/mol for Pb²⁺, Cd²⁺, and Hg²⁺, respectively; suggesting that physical electrostatic force is involved in the sorption process. The developed method was validated for system efficiency, accuracy, and precision.

     

Surface Modification of Porous Silica with Bi-thiophene Tripodal Ligand and Aplication to Adsorption of Toxic Metal Cations

The immobilization of a thiophene-based tripodal ligand, with a donor sulfur, on the surface of an epoxide group containing a silica gel phase for the synthesis of a newly functionalized material based on porous silica-bound bi-thiophene tripodal ligand (SGBT) is described. The modified silica surface was characterized by ¹³C NMR of a solid sample, elemental analysis, and infrared spectra. This new material was also studied and evaluated by determination of the surface area using the BET equation, the adsorption and desorption capability using the isotherm of nitrogen and BJH pore sizes, respectively. The target material exhibits good thermal stability as determined by thermogravimetry curves. The synthesized material was utilized in column and batch methods for adsorption of Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Zn²⁺, K⁺, Na⁺, and Li⁺, and the material exhibits an affinity only towards toxic heavy metals.     

Removal of Cu(II), Cd(II) and Cr(III) ions from aqueous solution by dam silt

The removal of heavy metals, such as Cu(II), Cd(II) and Cr(III) from aqueous solution was studied using Chorfa silt material (Mascara, Algeria). The main constituents of silt sediment are quartz, calcite and mixture of clays. The experimental data were described using Freundlich, Langmuir, Dubinin–Radushkevich (D–R) and Langmuir–Freundlich models. The adsorbed amounts of chromium and copper ions were very high (95% and 94% of the total concentration of the metal ions), whereas cadmium ion was adsorbed in smaller (55%) amounts. The Langmuir–Freundlich isotherm model was the best to describe the experimental data. The maximum sorption capacity was found to be 26.30, 11.76 and 0.35 mg/g for Cr³⁺, Cu²⁺ and Cd²⁺, respectively. The results of mean sorption energy, E (kJ/mol) calculated from D–R equation, confirmed that the adsorption of copper, chromium and cadmium on silt is physical in nature.     

Effect of Toxic Metal Ions on Photosensitized Singlet Oxygen Generation for Photodegradation of Polyaromatic Hydrocarbon Derivatives and Inactivation of Escherichia coli

Here, we report an experimental study of the effect of toxic metal ions on photosensitized singlet oxygen generation for photodegradation of PAH derivatives, Anthracene‐9,10‐dipropionic acid disodium salt (ADPA) and 1,5‐dihydroxynapthalene (DHN) and photoinactivation of Escherichia coli bacteria by using cationic meso‐tetra(N‐methyl‐4‐pyridyl)porphine tetrachloride (TMPyP) as a singlet oxygen photosensitizer. Three s‐block metals ions, such as Na⁺, K⁺ and Ca²⁺ and five toxic metals such as Cd²⁺, Cu²⁺, Hg²⁺, Zn²⁺ and Pb²⁺ were studied. The s‐block metal ions showed no change in the rate of photodegradation of ADPA or DHN by TMPyP, whereas a dramatic change in the photodegradation of ADPA and DHN was observed in the presence of toxic metals. The maximum photodegradation rate constants of ADPA and DHN were observed for Cd²⁺ ions [(3.91 ± 0.20) × 10^?3 s^?1 and (7.18 ± 0.35) × 10^?4 s^?1, respectively]. Strikingly, the photodegradation of ADPA and DHN was almost completely inhibited in the presence of Hg²⁺ ions and Cu²⁺ ions. A complete inhibition of growth of E. coli was observed upon visible light irradiation of E. coli solutions with TMPyP and toxic metal ions particularly, Cd²⁺, Hg²⁺, Zn²⁺ and Pb²⁺ ions, except for Cu²⁺ ions where a significantly slow inhibition of E. coli's growth was observed.     

Metal Ions as Activators of Hypoxia Inducible Factor

Activation of antihypoxic program under the action of a number of transition and heavy metals has been studied using cell-based HIF1 ODD-luc and HRE-luc reporters. It has been demonstrated that Au³⁺, Pb²⁺, Sn²⁺, Hg²⁺ are weak HIF1 ODD-luc activators, likely reflecting their weak competition for the ironbinding site in the active center of HIF prolyl hydroxylase. Metals capable of replacing iron–Mn²⁺, Zn²⁺, Cu²⁺ и Ni²⁺–activate at high submillimolar concentrations, which indicates low permeability of the cell membrane for transition metals. The highest activation is observed for Co²⁺ and Cd²⁺, however, Cd²⁺ is highly toxic even at 10 μM, in contrast to Co²⁺, which activates both reporters without toxicity signs up to 25 μM for 24 h. A significant activation by Co²⁺ is observed already in low micromolar range of concentrations, which can be recommended for use in hypoxia mimicking.     

Quantitative Trennung von Schwermetallen mit Chelataustauschern auf der Basis von Polystyrol

Zusammenfassung Die Trennung und Isolierung von folgenden Schwermetallen bei einem hohen Überschuß an Fremdionen mit Hilfe neuer selektiver Chelataustauscher wird beschrieben: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; Abtrennung von Hg²⁺. Unter gleichen Bedingungen war mit dem handelsüblichen Austauscher Dowex A-1 keine Trennung möglich.

---

Quantitative separation of heavy metals by means of chelating exchangers based on polystyrol

Summary The separation and isolation of the following heavy metals in presence of a high excess of foreign ions by means of new selective chelating exchangers is described: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; separation of Hg²⁺. Under the same conditions no separation could be achieved by the ion-exchanger Dowex A-1.

     

Homogeneous Chemiluminescent Determination of Mercury(II) Using a Peroxidase-Mimicking DNAzyme Assay

Environmental pollution in manufacturing sectors is often accompanied by the release of diverse forms of pollutants including heavy metals. Mercury is one of the most toxic heavy metals. Here, we describe a homogeneous chemiluminescent method for Hg²⁺ detection based on allosteric activation of peroxidase-mimicking DNAzyme and formation of Hg²⁺-thymine bonds in DNA duplex with T–T mismatches in the presence of mercury. The formation of such duplex increased the activity of peroxidase-mimicking DNAzyme. The analysis conditions and structures of probes were optimized. Under the favorable conditions, the limit of detection and a linear range of the assay were 12 and 12–600?nM, respectively. The values of coefficient of variation measured within the working range varied from 0.7 to 3.0%. The study of cross-reactivity of Hg²⁺, Ag⁺, Pb²⁺, Ca²⁺, Zn²⁺, Bi³⁺, Ni²⁺, Co²⁺, Ba²⁺, Mn²⁺, Cd²⁺, Mg²⁺, and Cr³⁺ showed that only mercury in concentration nanoscale activates peroxidase-mimicking DNAzyme that indicates high specificity of the developed Hg²⁺ assay. Thus, an easy-to-use, specific, rapid, and sensitive method for Hg²⁺ detection was developed.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.     

One-step Bioluminescence ATPase Assay for the Evaluation of Neurotoxic Effects of Metal Ions

Summary. Membrane-bound ATPases, such as Na,K-ATPase and nucleotide triphospho-diphosphohydrolase (NTPDase), being one of the first targets of a toxic action are generally considered as good markers for estimating toxicity. A bioluminescence assay was applied for fast and sensitive evaluation of heavy metals effect on the rat brain synaptosomal membrane ATPase activity. The assay consists of ATP-consuming reaction catalyzed by synaptic plasma membrane ATPases coupled to the luminescent firefly luciferase reaction, which consumes residual ATP after the course of ATPase reaction. The bioluminescence ATPase assay was applied to study the effect of heavy and transitional metals (Cu²⁺, Pb²⁺, Cd²⁺, Hg²⁺) on rat brain ATPase activity after assay optimization. All metals applied inhibited synaptic membrane ATPase activity in a concentration dependent manner. The IC ₅₀ values (Hg²⁺ < Cu²⁺ < Cd²⁺ < Pb²⁺) obtained with the bioluminescence assay were highly correlated with those obtained by the spectrophotometric method. The fast bioluminescence ATPase assay with small sample and substrate requirements could be adjusted for high-throughput environmental and pharmacological screening.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Comparative of the removal of Pb2+, Cd2+ and Ni2+ by nano crystallite hydroxyapatite from aqueous solutions: Adsorption isotherm study

Release of heavy metal onto the water and soil as a result of agricultural and industrial activities may pose a serious threat to the environment. In this study, the adsorption behavior of nano hydroxyapatite with respect to Pb²⁺, Cd²⁺ and Ni²⁺ has been studied in order to consider its application to purity metal finishing wastewater. The batch method has been employed, using metal concentrations in solution ranging from 100 to 400 mg/L. The uptake capacity and distribution coefficients (K_d) were determined for the adsorption system as a function of sorbate concentration. The Langmuir, Freundlich, and Dubinin–Kaganer–Radushkevich (DKR) isotherms applied for sorption studies showed that the amount of metal sorbed on nano hydroxyapatite. It was found that the adsorption phenomena depend on charge density and hydrated ion diameter. According to the equilibrium studies, the selectivity sequence can be given as Pb²⁺ > Cd²⁺ > Ni²⁺. These results show that nano hydroxyapatite holds great potential to remove cationic heavy metal species from industrial wastewater.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

New generation of functionalized bipyrazolic tripods: synthesis and study of their coordination properties towards metal cations

A simple and easily synthesis of new generation of N-donor bipyrazolic tripods by coupling of functionalized pyrazole derivatives and an appropriate primary amine derivative via condensation or nucleophilic substitution reaction is presented. The complexation capacity of these compounds towards bivalent metal ions (Hg²⁺, Cu²⁺, Pb²⁺, Cd²⁺) and alkaline metal ions (Li⁺, Na⁺, K⁺) were investigated using the liquid–liquid extraction process. The percentage limits of extraction were determined by atomic absorption measurements.     

Structural and sorption characteristics of carbon adsorbents from waste formed in wood processing

The structural and sorption characteristics of microporous sorbents from industrial lignin with respect to some toxic substances, Pb²⁺, Cd²⁺, Cu²⁺, and NH⁺ ₄ ions, and also the possibility of accumulation of methane on these carbons were studied. Simple procedures for modification of the carbon surface to improve the sorption power of the carbons were suggested.     

A reactive electrode (reactrode) for the voltammetric determination of heavy metals in laboratories and for use as a passive monitor in remote analysis

The use of a reactive electrode (reactrode) consisting of graphite, a solid ion exchanger (HYPHAN) and paraffin for the batch analysis of Cd²⁺, Cu²⁺, Pb²⁺ and Hg²⁺ in aqueous samples and as a passive monitor for these metal ions is described. The metal ions are accumulated on the reactrode surface at an open-circuit potential in an ion-exchange reaction. After the accumulation, the ion exchanger-bonded metal ions are reduced to the metals which remain on the electrode surface. In a following step, the metals are anodically dissolved which is recorded by differential-pulse voltammetry. The 3s detection limits for the analysis of drinking water are: 1.1×10^-7 mol/l for Pb²⁺, 5×10^-8 mol/l for Hg²⁺ and 2.4×10^-7 mol/l for Cu²⁺.The reactrode developed can be used for the passive monitoring of heavy metals in aqueous streams if the reactrode is mounted in a wall-jet cell which is part of a flow-through system. Using this arrangement, it has been possible to determine Hg²⁺, Cu²⁺ and Pb²⁺ in drinking water after 20 hours of accumulation.     

Simultaneous Determination of Cadmium,Lead, Copper and Mercury Ions Using Organofunctionalized SBA‐15 Nanostructured Silica Modified Graphite–Polyurethane Composite Electrode

A new sensor has been developed for the simultaneous detection of cadmium, lead, copper and mercury, using differential pulse and square wave anodic stripping voltammetry (DPASV and SWASV) at a graphite–polyurethane composite electrode with SBA‐15 silica organofunctionalized with 2‐benzothiazolethiol as bulk modifier. The heavy metal ions were preconcentrated on the surface of the modified electrode at ?1.1 V vs. SCE where they complex with 2‐benzothiazolethiol and are reduced to the metals, and are then reoxidized. Optimum SWASV conditions lead to nanomolar detection limits and simultaneous determination of Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ in natural waters was achieved.     

Sorption of heavy metal ions by silica gel-immobilized, proton-ionizable calix[4]arenes

Silica gel-immobilized, di-ionizable calix[4]arenes are employed as stationary phases in ion-exchange chromatography for selected heavy metal ions. Sorption efficiencies for Pb²⁺ are dependent on the structure of the calix[4]arene ligand and the linker that joins the ligand to the silica gel, as well as the acidity of the sample solution. Although the resins exhibit only poor sorption of Cd²⁺, they are found to be scavengers for Hg²⁺. Competitive sorption studies are conducted with selected resins.     

Electrochemical Sensing of Mercury over Cadmium and Lead Cations by the Redox-Active Polyazacycloalkane Ligand 1,1″: 1′,1′′′-Bis[ethane-1,2-diylbis(iminomethylene)]bis[ferrocene]

The coordination behaviour of the redox-active polyazacycloalkane L¹ against the toxic heavy-metal ions Cd²⁺, Pb²⁺, and Hg²⁺ was studied in THF/H₂O 70 : 30 (containing 0.1 mol⋅dm⁻³ of (Bu₄N)ClO₄). The crystal and molecular structure of the cadmium complex [Cd(L¹)(NO₃)₂] ( 1 ) was determined by X-ray single-crystal analysis. The cadmium ion is in a 4+2 surrounding with the ligand L¹ acting as tetradentate and the apical positions occupied by the O-atoms of the nitrate anions. An electrochemical study reveals that L¹ shows a selective electrochemical response against Hg²⁺ over Cd²⁺ and Pb²⁺.     

Bile acid based receptors for multiple metal ion recognition

A series of bile acid based receptors having triazole unit along with some additional heteroatom containing moieties as coordinating units for transition metal ion recognition has been synthesized. The UV–Vis studies revealed that these receptors show significant multiple binding affinity for Hg²⁺, Cd²⁺, Pb²⁺ and Cu²⁺ ions.