Allgemeiner Zugang zu Polyaminen mit Ethan-1,2-diamin-Einheiten: Synthese von nicht natürlich vorkommenden homologen und isomeren N1,4-Di(4-cumaroyl)sperminen

█tl="American"█The synthesis of the three N,N′-di(4-coumaroyl)tetramines, i.e., of (E,E)-N-{3-[(2-aminoethyl)amino]propyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1a ), (E,E)-N-{4-[(2-aminoethyl)amino]butyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1b ), and (E,E)-N-{6-[(2-aminoethyl)amino]hexyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1c ), is described. It proceeds through stepwise construction of the symmetric polyamine backbone including protection and deprotection steps of the amino functions. Their behavior on TLC in comparison with that of 1,4-di(4-coumaroyl)spermine (=(E,E)-N-{4-[(3-aminopropyl)amino]butyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(propane-1,3-diyl)bis[prop-2-enamide]; 2 ) is discussed.     

Synthesis of some imidazole- and pyrazole- derived chelating agents

Procedures involving condensation of o-phenylenediamines with carboxylic acids, and reaction of bifunctional alkyl halides with bifunctional nucleophiles are described. Syntheses are reported of 2,6-bis-(2-benzimidazyl)-pyridine, 1,3-bis(2-benzimidazyl)-2-thiapropane, 1,7-bis(2-benzimidazyl)-2,6-dithiaheptane, 2-hydroxymethyl-5,6-dimethylbenzimidazole, 2-chloromethyl-5,6-dimethylbenzimidazole hydrochloride, 1,7-bis(5,6-dimethyl-2-benzimidazyl)-2,6-dithiaheptane, 3,6-bis(1-pyrazolyl)pyridazine, 2-(2-hydroxy-3-methyl–phenyl)benzimidazole, 2-(2-hydroxyphenyl)benzimidazole, 5-(2-hydroxphenyl)-3-methyl-1-phenylpyrazole, 3(5)-(2-hydroxyphenyl)-5(3)-methylpyrazole, 3(5)-(2-hydroxyphenyl)-5(3)-phenylpyrazole, and 1,3-bis((5-methylpyridyl)imino)isoindoline.     

Structural studies on new diphenyl formazans and their lanthanide(III) complexes

Summary Potentiometric, u.v., i.r., n.m.r. and t.g.a. studies have been carried out on 1,5-bis(o-carboxyphenyl)-3-acetyl-formazan and 1-(o-carboxyphenyl-5-(o-hydroxyphenyl)-3-acetylformazan and their complexes with trivalent lanthanide ions. The ionization constants of formazans and the formation constants of their complexes have been determined potentiometrically by the Bjerrum-Calvin method (Irving and Rossotti modification). Complexation has also been studied by a conductimetric titration method.     

Synthesis of some benzimidazole-, pyridine- and imidazole-derived chelating agents

Procedures are described for the preparation of various bidentate and potentially tridentate chelating agents. These incorporate pyridyl, benzimidazole, imidazole or phenolic moieties. Phillips condensations of carboxylic acids with o-phenylenediamines were carried out in 4 M hydrochloric acid. Syntheses are reported for 2, 6-bis(N′-methylimidazol-2′-ylthiomethyl)pyridine, 2, 6-bis(benzimidazol-2′-ylthiomethyl)pyridine, 2-(4′-piperidyl)benzimidazole, 2-(3′-piperidyl)benzimidazole, 2-(3-N′-methylpiperidyl)benziinidazole, 2-(3-N′-methylpiperidyl)-N-methylbenzimidazole, 2-(2′-hydroxybenzyl)benzimidazole and 2-(2′-hydroxyben-zyl)N-methylbenzimidazole. The compounds were characterized where appropriate by their mass, uv, and ¹H-nmr spectra. 2-(2′-Hydroxybenzyl)benzimidazole hydrochloride acts as a gelling agent in aqueous solution.     

Synthesis and properties of novel aromatic polyamides based on “multi-ring” flexible dicarboxylic acids

The five benzene rings-containing (hereafter referred to as “five-ring”) dicarboxylic acids α,α′-bis[4-(4-carboxyphenoxy)phenyl]-1,4-diisopropylbenzene (p- III ) and α,α′-bis[4-(4-carboxyphenoxy)phenyl]-1,3-diisopropylbenzene (m- III ) were prepared by the fluoro-displacement of α,α′-bis(4-hydroxyphenyl)-1,4-diisopropylbenzene and α,α′-bis(4-hydroxyphenyl)-1,3-diisopropylbenzene with p-fluorobenzonitrile, and subsequent alkaline hydrolysis of the intermediate dinitriles. A number of high-molecular-weight polyamides based on these two “five-ring” dicarboxylic acids (p- III and m- III ) and various aromatic diamines were directly synthesized in N-methyl-2-pyrrolidone (NMP) containing lithium chloride (LiCl) or calcium chloride (CaCl₂) using triphenyl phosphite and pyridine as condensing agents. These polyamides were obtained with inherent viscosities above 0.51 and up to 0.91 dL/g. The weight-average molecular weight were in the range of 51,000–211,000. Most of these polyamides were amorphous and readily soluble in polar solvents such as NMP, N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO), and afforded tough, flexible, and transparent films by solution-casting. The films had tensile strength of 50–83 MPa, elongation to break of 4–8%, and tensile modulus of 1.3–2.0 GPa. Most polyamides showed distinct glass transitions on the differential scanning calorimetry (DSC) curves ranging from 147 to 177°C. In nitrogen or air, all the polymers showed no significant weight loss up to 490°C, as indicated by thermogravimetric analysis (TG). © 1996 John Wiley & Sons, Inc.     

Synthesis of 2-(Substituted Benzylideneamino)-4-(4′-hydroxyphenyl) Thiazoles and Their O-Glucosides

2-Amino-4-(4′-hydroxyphenyl) thiazole 1a was prepared from reaction between p-hydroxyacetophenone, thiourea, and iodine; compound 1a was treated with several (aryl/hetro aryl) aldehydes to form 2-(substituted benzylideneamino)-4-(4′-hydroxyphenyl) thiazoles 2a–j, which were glucosylated by using acetobromoglucose as a glucosyl donor to afford 2-(substituted benzylideneamino)-4-(2, 3, 4, 6-tetera-o-acetyl-4′-o-β-d-glucosidoxyphenyl) thiazoles 3a–j, which further on during deacetylation produced 2-(substituted benzylideneamino)-4-(4′-o-β-d-glucosidoxyphenyl) thiazoles 4a–j. These compounds were evaluated for biological activity, and their structure was confirmed by IR, NMR, mass spectra, elemental, and chemical analysis.

     

Antibacterial,Antioxidant and Binding Studies of Some Novel Diaryl Sulphide Derivatives

Abstract

A series of novel acyclic and cyclic diaryl sulphides was synthesized from 2,2′-dithiobenzoic acid. The various diaryl sulphides were characterized by use of spectral (IR, ¹H and ¹³C NMR, ESI/MS) and elemental analyses. The antimicrobial activities of the compounds were evaluated in terms of their minimum inhibition concentration (MIC) against a panel of clinical isolates bacteria and were found to possess only moderate antimicrobial activities. N,N′-Bis(2-hydroxyphenyl)-2,2′-thiodibenzamide (13), exhibiting a hydroxy group at the phenyl ring, was the most active antimicrobial agent within the series, with MIC values of 0.05 mg mL^–1 and 10 mg mL^–1 against Staphylococcus aureus and Bacillus cereus, respectively. The antioxidant efficiency of the diaryl sulphides was determined by 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity with 13 being the most active compound. The interaction of 2,2′-thiodibenzanilide, N,N′-bis(2-methylphenyl)-2,2′-thiodibenzamide, and N,N′-bis(2-hydroxyphenyl)-2,2′-thiobenzamide with guanine, glutamic acid, and urea were studied quantitatively with binding constants ranging from 1 × 10³ M^?1 to 2.7 × 10⁴ M^?1.     

Electrospray-Ionization Mass Spectrometry. Part III. Acid-Catalyzed Isomerization of N,N′-Bis[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines by the Zip Reaction

The electrospray tandem mass spectra (ESI-MS/MS) of the three N,N′-bis[(E)-3-(4-hydroxyphenyl)prop-2-enoyl]spermidines 1–3 displayed the same fragment-ion signals. These isomers could not be differentiated by ESI-MS/MS, since their fragmentation patterns are similar. (E,E)-N-(3-[¹⁵N]Aminopropyl)-3,3′-bis(4- hydroxyphenyl)-N,N′-(butane-1,4-diyl)bis[prop-2-enamide] ([¹⁵N(1)])-( 1 ) was synthesized in order to get further information about the fragmentation mechanisms. The comparison of the ESI-MS/MS of 1 and [¹⁵N(1)]- 1 revealed a transamidation, the Zip reaction, under mass-spectral conditions of the [ 1 + H]⁺ ions. Because of this reaction, the three isomers 1–3 could not be distinguished.     

Synthesis of 1,5-Benzodiazepines with Unusual Substitution Pattern from Chalcones Under Solvent-Free Microwave Irradiation Conditions

1,5-Benzodiazepines have been synthesized from the corresponding 2′-hydroxychalcones [1-(2-hydroxyphenyl)-3-aryl-2-propen-1-ones] and o-phenylenediamine, both in methanol, under reflux and under solvent-free microwave irradiation conditions on alumina. The latter method proved to be advantageous.     

4-(Cyclic Amidino)phenols - Preparation and Use In A Diamidine Synthesis

The Pinner synthesis was applied to the preparation of 4-(cyclic amidino)phenols in high yields from readily available 4-hydroxybenzimidic acid methyl ester hydrochloride and diaminoalkanes. An alternative attempt was made to convert 4-(hydroxy)thiobenzamide to 4-(1,4,5,6-tetrahydro-5-hydroxy-2-pyrimidiyl)phenol. A procedure for the preparation of 3,6-bis(4-hydroxyphenyl)- 1,2,4,5-tetrazine is reported here. The syntheses of 2,4-bis[4-(4,5-dihydro-lH-imidazol-2-yl)phenoxy]pyrimidine and 2-chloro-4-[4-(4,5-dihydro-lH-imidazol-2-yl)- phenoxylpyrimidine exemplify the use of the title synthetic intermediates.     

Derivatives Of ditraizinylamine and tritriazinylamine

2-Arylamino-4,6-dichloro-s-triazine reacts with cyanuric chloride in the presence of alkali to yield N,N-bis(4,6-dichloro-s-triazin-2-yl)-arylamine. In like manner, 2-substituted o-chloro-, p-chloro-, o-nitro- and p-carbomethoxyphenylamino-4,6-dimethoxy-s-triazines react with cyanuric chloride to yield the corresponding 4,6-dichloro-s-triazin-2-yl-4′,6′-dimethoxy-s-triazin-2′-ylaryl-amine, while anilino-, p-toluidino, o- and p-methoxyphenylamino and o-carbomethoxyphenylamino derivatives did not. The reaction of cyanuric chloride with 2,4-dichloro-6-ethylamino-s-triazine in the presence of alkali yields the condensation product of the ditriazinylamine type and the reaction of cyanuric chloride with ammonia yields N,N-bis(4,6-dichloro-s-triazin-2-yl)- or tris(4,6-dichloro-s-triazin-2-yl)amine.     

Hydroxyphenyl-1-methylpyridinium-jodide als potentielle Reaktivatoren von mit Organophosphor-Verbindungen vergifteten Acetylcholinesterasen

Hydroxyphenyl-1-methylpyridinium-iodide as Potential Reactivators of Acetylcholinesterase Poisoned with Organophosphorus Compounds . It was our aim to reactivate acetylcholinesterase poisoned with sarin. We synthesized 2-(o-hydroxyphenyl)-1-methylpyridinium-iodide ( 9 ), 2-(p-hydroxyphenyl)-1-methylpyridinium-iodide ( 19 ) and 4-(o-hydroxyphenyl)-1-methylpyridinium-iodide ( 14 ) as potential reactivators. All substances showed moderate toxicity against mice; their reactivity potency in vitro and in vivo was negligible.     

Über die Natur von Schwermetallkomplexen aus 2-(2-Hydroxyphenyl)-4-carboxy-2-H-napht[1.2-d]triazolen

2-(2-hydroxyphenyl)-4-carboxy-naphtho [1.2-d] triazoles are terdentate ligands which can form 1:1 complexes with Cu^II and Ni^II ions, and 1:1 as well as 1:2 complexes with Cr^III-ions. All these complexes are characterized by ortho-condensed 6/6-membered rings, the 1:2 chromium complexes having the DREW -PFITZNER arrangement. This behaviour, which differs from that of comparable o-hydroxy-o′-carboxy-diaryl azo-dyestuffs, is due to the different dimensions of the compared ligands.     

Structure and behavior of organic analytical reagents : Stability of chelates of 2-(o-hydroxyphenyl)-benzimidazole and analogous reagents1

Stabilities of chelates of 2-(o-hydroxyphenyl)-pyridine, 2-(o-hydroxyphenyl)-quinoline, 1-(o-hydroxyphenyl)-isoquinoline, 2-(o-hydroxyphenyl)-benzimidazole, and 2-(o-hydroxyphenyl)-imidazoline were determined by the Calvin-Bjerrum potentiometric titration technique. The results have been interpreted in terms of steric considerations.     

An N2O2 Tetradentate Ligand 6,6′-Bis(Acylamino)-2,2′-Bipyridine. Oxidation-Reduction Properties of Cobalt Complexes

Abstract

Recently, we reported the syntheses and the properties of a new type of N₂O₂ tetradentate ligands, 6,6′-bis(acylamino)-2,2′-bipyridines and their copper(II) complexes. ¹. These ligands form two different types of square-planar complexes, i.e., Type 1 and Type 2, depending on the pH of the solution. ^1,2 In addition, the deprotonated complexes (Type 2) are suggested to have strong ligand field, and are regarded as analogues of salen complexes. In this paper, we report syntheses and properties of cobalt complexes of 6,6′-bis(benzoylamino)-2,2′-bipyridine (babpH₂), and the interaction of the Type 2 complex with molecular oxygen.     

The Diyne Reaction of 3, 3′-Bis(phenylethynyl)-2, 2′-bithiophene Derivatives via Rhodium Complexes: A novel approach to condensed benzo[2, 1-b :3, 4-b′]dithiophenes

The syntheses of benzo-fused benzo[2, 1-b:3, 4-b′]dithiophenes 1 and benzo[2, 1-b:3, 4-b′:5, 6-c″]trithiophenes 2 are described. The treatment of easily available 3, 3′-bis(phenylethynyl)-2, 2′-bithiophene derivatives 5a and 6 (via Pd^II-catalyzed alkynylation of the corresponding 3, 3′-dibromo-2, 2′-bithiophenes; see Scheme 1) with chlorotris-(triphenylphosphine)rhodium(I) yields the corresponding cyclic rhodium complexes 7 (Scheme 2) which smoothly react with acetylenes and sulfur to give 1 and 2 in good yields (Schemes 3–5).     

Preparation of the enantiopure 1,2-diamine monomer and its polymerization: The efficient polymeric chiral ligand of an asymmetric hydrogenation catalyst

An enantiopure 1,2-diamine monomer possessing a p-vinylbenzyl group as a polymerizable group was synthesized from chiral 1,2-bis(p-hydroxyphenyl)-N,N′-bis(tert-butoxycarbonyl)-1,2-diaminoethane. The chiral monomer was copolymerized with styrene, and this was followed by the deprotection of the tert-butoxycarbonyl group, which yielded the polymer-supported chiral 1,2-diamine. The polymeric catalyst system was established with the polymeric chiral 1,2-diamine complexed with 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl/RuCl₂. In the presence of potassium tert-butoxide (t-BuOK), the polymeric catalyst system worked well in the asymmetric hydrogenation of aromatic ketones. The corresponding chiral secondary alcohols were obtained in quantitative yields with a high level of enantioselectivity. The insolubility of the catalyst, caused by the crosslinked structure of the polymer, made it recyclable. The polymeric catalyst was reused several times without a loss of catalytic activity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4556–4562, 2004     

Synthesis and reactions with <Emphasis Type="Italic">N</Emphasis>-nucleophiles of 1-(thien-2-yl)- and 1-(4-hydroxyphenyl)-3,4,4-trichloro-3-buten-1-ones

Acylation of thiophene and phenol with 3,4,4-trichloro-3-butenoyl chloride afforded the corresponding 1-(thien-2-yl)- and 1-(4-hydroxyphenyl)-3,4,4-trichloro-3-buten-1-ones, whose reaction with amines led to the formation of 3-amino-1-(thien-2-yl, 4-hydroxyphenyl)-4,4-dichloro-2-buten-1-ones The heterocyclization of the initial ketones into pyrazole structure was not observed, and the reaction with hydrazine hydrate provided bispyrazole products, N,N′-bis(5-thien-2-yl)- and N,N′-bis[5-(4-hydroxyphenyl)-1H-pyrazol-3-ylmethylene]hydrazines.     

Conversion of 2-(O-hydroxyphenyl) alkyl ketones into 2-hydroxymethylchroman derivatives

2-Hydroxymethylchromans are the only products arising from the oxidation by m-chloro-perbenzoic acid of the β-(o-hydroxyphenyl) olefins VI, obtained in turn form 2-(o-hydroxy-phenyl) alkyl ketones (I) by the Wittig olefination with triphenylphosphonium methylide.     

1,2,3-benzotriazines. II. Reactions of benzimidazo[1,2-c][1,2,3]benzotriazines and naphth[1′,2′(2′,1′):4,5]imidazo[1,2-c][1,2,3]benzotriazine

A number of methyl- and halogeno-substituted benzimidazo[1,2-c][1,2,3]benzotriazines were subjected to a series of hydrolytic cleavages in acid media. The reactions of these compounds with dilute sulfuric acid yielded 2-(o-hydroxyphenyl)benzimidazoles. Concentrated hydrochloric acid produced a mixture of 2-(o-chlorophenyl)- and 2-(o-hydroxyphenyl)benzimidazoles. Hydrogen chloride in ethanol caused the formation of 2- phenylbenzimidazoles contaminated with small amounts of 2 - (o-chlorophenyl)benzimidazoles. The benzimidazo[1,2-c][1,2,3]benzotriazines underwent the Sandmeyer reaction to form 2-(o-chlorophenyl)- and 2-(o-bromophenyl)benzimidazoles in excellent yields. These reactions illustrated the behavior of these 1,2,3-triazines as internal diazonium compounds. Naphth[1′,2′(2′,1′):4,5]imidazo[1,2-c][1,2,3]benzotriazine behaved similarly. Bromination of some benzimidazo[1, 2 - c][1,2,3]benzotriazines in aqueous medium yielded bromine-substituted [1,2-c][1,2,3]benzotriazines.