Single particle tracking reveals corralling of a transmembrane protein in a double-cushioned lipid bilayer assembly

A predominate question associated with supported bilayer assemblies containing proteins is whether or not the proteins remain active after incorporation. The major cause for concern is that strong interactions with solid supports can render the protein inactive. To address this question, a large transmembrane protein, the serotonin receptor, 5HT(3A), has been incorporated into several supported membrane bilayer assemblies of increasing complexity. The 5HT(3A) receptor has large extracellular domains on both sides of the membrane, which could cause strong interactions. The bilayer assemblies include a simple POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) supported planar bilayer, a “single-cushion” POPC bilayer with a PEG (poly(ethylene glycol)) layer between membrane and support, and a “double-cushion” POPC bilayer with both a PEG layer and a layer of BSA (bovine serum albumin). Single-cushion systems are designed to lift the bilayer from the surface, and double-cushion systems are designed to both lift the membrane and passivate the solid support. As in previously reported work, protein mobilities measured by ensemble fluorescence recovery after photobleaching (FRAP) are quite low, especially in the double-cushion system. But single-particle tracking of fluorescent 5HT(3A) molecules shows that individual proteins in the double-cushion system have quite high local mobilities but are spatially confined within small corralling domains ( 450 nm). Comparisons with the simple POPC membrane and the single-cushion POPC?PEG membrane reveal that BSA both serves to minimize interactions with the solid support and creates the corrals that reduce the long-range (ensemble averaged) mobility of large transmembrane proteins. These results suggest that in double-cushion assemblies proteins with large extra-membrane domains may remain active and unperturbed despite low bulk diffusion constants.     

Prediction of membrane protein types by incorporating amphipathic effects

According to their intramolecular arrangement and position in a cell, membrane proteins are generally classified into the following six types: (1) type I transmembrane, (2) type II transmembrane, (3) multipass transmembrane, (4) lipid chain-anchored membrane, (5) GPI-anchored membrane, and (6) peripheral membrane. Situated in a heteropolar environment, these six types of membrane proteins must have quite different amphiphilic sequence-order patterns in order to stabilize their respective frameworks. To incorporate such a feature into the predictor, the amphiphilic pseudo amino acid composition has been formulated that contains a series of hydrophobic and hydrophilic correlation factors. The success rates thus obtained have been remarkably enhanced in identifying the types of membrane proteins, as demonstrated by the jackknife test and independent data set test, respectively.     

From interactions of single transmembrane helices to folding of alpha-helical membrane proteins: analyzing transmembrane helix-helix interactions in bacteria

Despite a wide variety of biological functions, alpha-helical membrane proteins display a rather simple transmembrane architecture. Although not many high resolution structures of transmembrane proteins are available today, our understanding of membrane protein folding has emerged in the recent years. Now we begin to develop a basic understanding of the forces that guide folding and interaction of alpha-helical membrane proteins. Some structural requirements for transmembrane helix interactions are defined, and common motifs have been discovered in the recent years which can drive helix-helix interactions. Nevertheless, many open questions remain to be addressed in future studies. One general problem with investigating transmembrane helix interactions is the limited number of appropriate tools, which can be applied to investigate membrane protein folding. Only recently several new techniques have been developed and established, including genetic systems, which allow measuring transmembrane helix interactions in vitro and in vivo. In the first part of this review, we summarize several aspects of the current understanding of membrane protein folding and assembly. In the second part, we discuss genetic systems, which were developed in the recent years to measure interaction of transmembrane helices in the inner membrane of E. coli.     

Organic solvent extraction as a versatile procedure to identify hydrophobic chloroplast membrane proteins

As a complementary approach to genome projects, proteomic analyses have been set up to identify new gene products. One of the major challenges in proteomics concerns membrane proteins, especially the minor ones. A procedure based on the differential extraction of membrane proteins in chloroform/methanol mixtures, was tested on the two different chloroplast membrane systems: envolope and thylakoid membranes. Combining the use of classical sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and mass spectrometry analyses, this procedure enabled identification of hydrophobic proteins. The propensity of hydrophobic proteins to partition in chloroform/methanol mixtures was directly correlated with the number of amino acid residues/number of putative transmembrane regions (Res/TM ratio). Regardless of the particular case of some lipid-interacting proteins, chloroform/methanol extractions allowed enrichment of hydrophobic proteins and exclusion of hydrophilic proteins from both membrane systems, thus demonstrating the versatility of the procedure.     

Predicting three-dimensional structures of transmembrane domains of β-barrel membrane proteins

β-Barrel membrane proteins are found in the outer membrane of gram-negative bacteria, mitochondria, and chloroplasts. They are important for pore formation, membrane anchoring, and enzyme activity. These proteins are also often responsible for bacterial virulence. Due to difficulties in experimental structure determination, they are sparsely represented in the protein structure databank. We have developed a computational method for predicting structures of the transmembrane (TM) domains of β-barrel membrane proteins. Based on physical principles, our method can predict structures of the TM domain of β-barrel membrane proteins of novel topology, including those from eukaryotic mitochondria. Our method is based on a model of physical interactions, a discrete conformational state space, an empirical potential function, as well as a model to account for interstrand loop entropy. We are able to construct three-dimensional atomic structure of the TM domains from sequences for a set of 23 nonhomologous proteins (resolution 1.8-3.0 ?). The median rmsd of TM domains containing 75-222 residues between predicted and measured structures is 3.9 ? for main chain atoms. In addition, stability determinants and protein-protein interaction sites can be predicted. Such predictions on eukaryotic mitochondria outer membrane protein Tom40 and VDAC are confirmed by independent mutagenesis and chemical cross-linking studies. These results suggest that our model captures key components of the organization principles of β-barrel membrane protein assembly.     

Microwave-assisted acid hydrolysis of proteins combined with liquid chromatography MALDI MS/MS for protein identification

Simple and efficient digestion of proteins, particularly hydrophobic membrane proteins, is of significance for comprehensive proteome analysis using the bottom-up approach. We report a microwave-assisted acid hydrolysis (MAAH) method for rapid protein degradation for peptide mass mapping and tandem mass spectrometric analysis of peptides for protein identification. It uses 25% trifluoroacetic acid (TFA) aqueous solution to dissolve or suspend proteins, followed by microwave irradiation for 10 min. This detergent-free method generates peptide mixtures that can be directly analyzed by liquid chromatography (LC) matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) without the need of extensive sample cleanup. LC-MALDI MS/MS analysis of the hydrolysate from 5 microg of a model transmembrane protein, bacteriorhodopsin, resulted in almost complete sequence coverage by the peptides detected, including the identification of two posttranslational modification sites. Cleavage of peptide bonds inside all seven transmembrane domains took place, generating peptides of sizes amenable to MS/MS to determine possible sequence errors or modifications within these domains. Cleavage specificity, such as glycine residue cleavage, was observed. Terminal peptides were found to be present in relatively high abundance in the hydrolysate, particularly when low concentrations of proteins were used for MAAH. It was shown that these peptides could still be detected from MAAH of bacteriorhodopsin at a protein concentration of 1 ng/microl or 37 fmol/microl. To evaluate the general applicability of this method, it was applied to identify proteins from a membrane protein enriched fraction of cell lysates of human breast cancer cell line MCF7. With one-dimensional LC-MALDI MS/MS, a total of 119 proteins, including 41 membrane-associated or membrane proteins containing one to 12 transmembrane domains, were identified by MS/MS database searching based on matches of at least two peptides to a protein.     

SNARE derived peptide mimic inducing membrane fusion

SNARE proteins mediate membrane fusion between synaptic vesicles and the plasma membrane. A minimized peptide SNARE model system with reduced complexity was introduced combining the native SNARE transmembrane (TMD) and linker domains with artificial coiled-coil forming peptides. Specific membrane fusion initiated by coiled-coil recognition was shown by lipid and content mixing vesicle assays.     

Systematic cyanobacterial membrane proteome analysis by combining acid hydrolysis and digestive enzymes with nano-liquid chromatography–Fourier transform mass spectrometry

The identification of membrane proteins is currently under-represented since the trans-membrane domains of membrane proteins have a hydrophobic property. Membrane proteins have mainly been analyzed by cleaving and identifying exposed hydrophilic domains. We developed the membrane proteomics method for targeting integral membrane proteins by the following sequential process: in-solution acid hydrolysis, reverse phase chromatographic separation, trypsin or chymotrypsin digestion and nano-liquid chromatography–Fourier transform mass spectrometry. When we employed total membrane proteins of Synechocystis sp. PCC 6803, 155 integral membrane proteins out of a predictable 706 were identified in a single application, corresponding to 22% of a genome. The combined methods of acid hydrolysis-trypsin (AT) and acid hydrolysis-chymotrypsin (AC) identified both hydrophilic and hydrophobic domains of integral membrane proteins, respectively. The systematic approach revealed a more concrete data in mapping the repertoire of cyanobacterial membrane and membrane-linked proteome.     

Proteomic analysis of detergent-resistant membrane rafts

A combined, detergent- and organic solvent-based proteomic method for the analysis of detergent-resistant membrane rafts (DRMR) is described. These specialized domains of the plasma membrane contain a distinctive and dynamic protein and/or lipid complement, which can be isolated from most mammalian cells. Lipid rafts are predominantly involved in signal transduction and adapted to mediate and produce different cellular responses. To facilitate a better understanding of their biology and role, DRMR were isolated from Vero cells as a Triton X-100 insoluble fraction. After detergent removal, sonication in 60% buffered methanol was used to extract, solubilize and tryptically digest the resulting protein complement. The peptide digestate was analyzed by microcapillary reversed-phase liquid chromatography-tandem mass spectrometry. Gas-phase fractionation in the mass-to-charge range was employed to broaden the selection of precursor ions and increase the number of identifications in an effort to detect less abundant proteins. A total of 380 proteins were identified including all known lipid raft markers. A total of 91 (24%) proteins were classified as integral alpha-helical membrane proteins, of which 51 (56%) were predicted to have multiple transmembrane domains.     

Functional aspects of membrane association of reggie/flotillin proteins

Flotillin-2 and flotillin-1, also called reggie-1 and reggie-2, are ubiquitously expressed and highly conserved proteins. Originally, they were described as neuronal regeneration proteins, but they appear to function in a wide variety of cellular processes, such as membrane receptor signaling, endocytosis, phagocytosis and cell adhesion. The molecular details of the function of flotillins in these processes have only been partially clarified. Flotillins are associated with cholesterol and sphingolipid enriched membrane microdomains known as rafts, and some findings even suggest that they define their own kind of a microdomain. The mechanism of the membrane association of flotillins appears to rely mainly on acylation (myristoylation and/or palmitoylation), localizing flotillins onto the cytosolic side of the membranes, whereas no transmembrane domains are present. In addition, flotillins show a strong tendency to form homo- and hetero-oligomers with each other. In this review, we will summarize the recent findings on the function of flotillins and discuss the mechanisms that might regulate their function, such as membrane association, oligomerization and phosphorylation.     

Developing a high-quality scoring function for membrane protein structures based on specific inter-residue interactions

Membrane proteins are of particular biological and pharmaceutical importance, and computational modeling and structure prediction approaches play an important role in studies of membrane proteins. Developing an accurate model quality assessment program is of significance to the structure prediction of membrane proteins. Few such programs are proposed that can be applied to a broad range of membrane protein classes and perform with high accuracy. We developed a new model scoring function Interaction-based Quality assessment (IQ), based on the analysis of four types of inter-residue interactions within the transmembrane domains of helical membrane proteins. This function was tested using three high-quality model sets: all 206 models of GPCR Dock 2008, all 284 models of GPCR Dock 2010, and all 92 helical membrane protein models of the HOMEP set. For all three sets, the scoring function can select the native structures among all of the models with the success rates of 93, 85, and 100% respectively. For comparison, these three model sets were also adopted for a recently published model assessment program for membrane protein structures, ProQM, which gave the success rates of 85, 79, and 92% separately. These results suggested that IQ outperforms ProQM when only the transmembrane regions of the models are considered. This scoring function should be useful for the computational modeling of membrane proteins.     

Structure and dynamics of nano-sized raft-like domains on the plasma membrane

Cell membranes are constitutively composed of thousands of different lipidic species, whose specific organization leads to functional heterogeneities. In particular, sphingolipids, cholesterol and some proteins associate among them to form stable nanoscale domains involved in recognition, signaling, membrane trafficking, etc. Atomic-detail information in the nanometer/second scale is still elusive to experimental techniques. In this context, molecular simulations on membrane systems have provided useful insights contributing to bridge this gap. Here we present the results of a series of simulations of biomembranes representing non-raft and raft-like nano-sized domains in order to analyze the particular structural and dynamical properties of these domains. Our results indicate that the smallest (5 nm) raft domains are able to preserve their distinctive structural and dynamical features, such as an increased thickness, higher ordering, lower lateral diffusion, and specific lipid-ion interactions. The insertion of a transmembrane protein helix into non-raft, extended raft-like, and raft-like nanodomain environments result in markedly different protein orientations, highlighting the interplay between the lipid-lipid and lipid-protein interactions.     

Residual dipolar coupling measurements of transmembrane proteins using aligned low-q bicelles and high-resolution magic angle spinning NMR spectroscopy

Bicelles are a major medium form to produce weak alignment of soluble proteins for residual dipolar coupling (RDC) measurements. The obstacle to using the same type of bicelles for transmembrane proteins with solution-state NMR spectroscopy is the loss of signals due to the adhesion or penetration of the proteins into large bicelles, resulting in slow protein tumbling. In this study, weak alignment of the second and third transmembrane domains (TM23) of the human glycine receptor (GlyR) was achieved in low-q bicelles (q = DMPC/DHPC). Although protein-free bicelles with such low q would likely show isotropic properties, the insertion of TM23 induced weakly preferred orientations so that the RDC of the embedded protein can be measured. The extent of the alignment increased but the TM23 signal intensity decreased when q was varied from 0.19 to 0.60. A q of 0.50 was found to be an optimal compromise between alignment and the signal-to-noise ratio. In each pair of NMR experiments for RDC measurements, the same sample and pulse sequence were used, with one being performed at high-resolution magic-angle spinning to obtain pure J-couplings without RDC. A meaningful structure refinement in bicelles was possible by iteratively fitting the experimental RDCs to the back-calculated RDCs using the high-resolution NMR structure of GlyR TM23 in trifluoroethanol as the starting template. Combination of this method with the conventional high-resolution NMR in membrane mimicking mixtures of water and organic solvents offers an attractive way to derive structural information for membrane proteins in their native environment.     

Computational design of a β-peptide that targets transmembrane helices

The design of β-peptide foldamers targeting the transmembrane (TM) domains of complex natural membrane proteins has been a formidable challenge. A series of β-peptides was designed to stably insert in TM orientations in phospholipid bilayers. Their secondary structures and orientation in the phospholipid bilayer was characterized using biophysical methods. Computational methods were then devised to design a β-peptide that targeted a TM helix of the integrin α(IIb)β(3). The designed peptide (β-CHAMP) interacts with the isolated target TM domain of the protein and activates the intact integrin in vitro.     

Rapid, highly efficient extraction and purification of membrane proteins using a microfluidic continuous-flow based aqueous two-phase system

Membrane proteins play essential roles in regulating various fundamental cellular functions. To investigate membrane proteins, extraction and purification are usually prerequisite steps. Here, we demonstrated a microfluidic aqueous PEG/detergent two-phase system for the purification of membrane proteins from crude cell extract, which replaced the conventional discontinuous agitation method with continuous extraction in laminar flows, resulting in significantly increased extraction speed and efficiency. To evaluate this system, different separation and detection methods were used to identify the purified proteins, such as capillary electrophoresis, SDS-PAGE and nano-HPLC-MS/MS. Swiss-Prot database with Mascot search engine was used to search for membrane proteins from random selected bands of SDS-PAGE. Results indicated that efficient purification of membrane proteins can be achieved within 5-7s and approximately 90% of the purified proteins were membrane proteins (the highest extraction efficiency reported up to date), including membrane-associated proteins and integral membrane proteins with multiple transmembrane domains. Compared to conventional approaches, this new method had advantages of greater specific surface area, minimal emulsification, reduced sample consumption and analysis time. We expect the developed method to be potentially useful in membrane protein purifications, facilitating the investigation of membrane proteomics.     

Design, construction, and characterization of high-performance membrane fusion devices with target-selectivity

Membrane fusion proteins such as the hemagglutinin glycoprotein have target recognition and fusion accelerative domains, where some synergistically working elements are essential for target-selective and highly effective native membrane fusion systems. In this work, novel membrane fusion devices bearing such domains were designed and constructed. We selected a phenylboronic acid derivative as a recognition domain for a sugar-like target and a transmembrane-peptide (Leu-Ala sequence) domain interacting with the target membrane, forming a stable hydrophobic α-helix and accelerating the fusion process. Artificial membrane fusion behavior between the synthetic devices in which pilot and target liposomes were incorporated was characterized by lipid-mixing and inner-leaflet lipid-mixing assays. Consequently, the devices bearing both the recognition and transmembrane domains brought about a remarkable increase in the initial rate for the membrane fusion compared with the devices containing the recognition domain alone. In addition, a weakly acidic pH-responsive device was also constructed by replacing three Leu residues in the transmembrane-peptide domain by Glu residues. The presence of Glu residues made the acidic pH-dependent hydrophobic α-helix formation possible as expected. The target-selective liposome-liposome fusion was accelerated in a weakly acidic pH range when the Glu-substituted device was incorporated in pilot liposomes. The use of this pH-responsive device seems to be a potential strategy for novel applications in a liposome-based delivery system.     

Selective proteome-wide detection of hydrophobic integral membrane proteins using a novel fluorescence-based staining technology

Integral proteins containing two or more alpha-helical membrane-spanning domains are underrepresented in two-dimensional gels. While sodium dodecyl sulfate (SDS)-polyacrylamide gels separate these proteins, staining profiles are usually dominated by high-abundance hydrophilic proteins in the specimen. A fluorescence-based stain is presented that selectively highlights integral proteins containing two or more alpha-helical transmembrane domains but does not detect lipoproteins or proteins with hydrophobic pockets, such as albumin. The stain detects as little as 5-10 ng of bacteriorhodopsin, a seven-helix transmembrane protein. Stained proteins are detected using a laser scanner or charge-coupled device (CCD) camera imaging system. Fluorescence intensity of stained bands is linear with protein quantity over at least two orders of magnitude. After visualizing transmembraneous proteins, the total protein profile may be revealed using a general protein stain. Analysis of the multisubunit protein F1F0 ATP synthase revealed selective staining of the a and c subunits, polypeptides known to possess 5 and 2 transmembrane domains, respectively.     

A HMM-based method to predict the transmembrane regions of beta-barrel membrane proteins

A novel method is developed to model and predict the transmembrane regions of beta-barrel membrane proteins. It is based on a Hidden Markov model (HMM) with architecture obeying those proteins' construction principles. The HMM is trained and tested on a non-redundant set of 11 beta-barrel membrane proteins known to date at atomic resolution with a jack-knife procedure. As a result, the method correctly locates 97% of 172 transmembrane beta-strands. Out of the 11 proteins, the barrel size for ten proteins and the overall topology for seven proteins are correctly predicted. Additionally, it successfully assigns the entire topology for two new beta-barrel membrane proteins that have no significant sequence homology to the 11 proteins. Predicted topology for two candidates for beta-barrel structure of the outer mitochondrial membrane is also presented in the paper.     

Solid-state NMR on a large multidomain integral membrane protein: the outer membrane protein assembly factor BamA

Multidomain proteins constitute a large part of prokaryotic and eukaryotic proteomes and play fundamental roles in various physiological processes. However, their structural characterization is challenging because of their large size and intrinsic flexibility. We show here that motional-filtered high-resolution solid-state NMR (ssNMR) experiments allow for the observation and structural analysis of very large multidomain membrane proteins that are characterized by different motional time scales. This approach was used to probe the folding of the 790-residue membrane protein BamA, which is the core component of the Escherichia coli outer membrane protein assembly machinery. A combination of dipolar- and scalar-based two-dimensional ssNMR experiments applied to two uniformly (13)C,(15)N-labeled BamA variants revealed characteristic secondary structure elements and distinct dynamics within the BamA transmembrane protein segment and the periplasmic POTRA domains. This approach hence provides a general strategy for collecting atomic-scale structural information on multidomain (membrane) proteins in a native-like environment.     

Membrane proteome in Escherichia coli probed by MS3 mass spectrometry: a preliminary report

Characterization of the membrane proteome is particularly intriguing since a better knowledge in this field might lead to new insights into the function of different membrane systems. Despite the biological relevance of surface proteins however, their characterization still remains a challenging task. Outer membrane proteins (OMPs) of Gram-negative bacteria are key molecules that interface the cell with the environment. Hence, surface proteins of Gram-negative bacteria contain proteins that might be good targets for drugs, antimicrobials or detection systems and they may become components of effective vaccines. In this respect, Escherichia coli has been chosen as a model organism for several structural and functional studies aimed at understanding the biophysical and biochemical organization of proteins in Gram-negative cell walls. Here we present first results for the identification of bacterial surface exposed proteins in E. coli K12 based on the use of dansyl chloride labelling coupled with bidimensional tandem mass spectrometry exploiting the advantage of precursor ion/MS3 scan modes. This procedure resulted in a promising, simple, and rapid strategy for the identification of membrane proteins in E. coli as model organism, thus avoiding time-consuming procedures based on two-dimensional liquid chromatography and electrophoresis. The proteins identified could be grouped into five major families: outer membrane (29 proteins), lipoproteins (6 proteins), transmembrane (43 proteins) families.