表面解吸常压化学电离质谱法快速判别樟树化学型

采用表面解吸常压化学电离质谱(SDAPCI-MS)技术直接对5种化学型的樟树叶粉末片剂进行分析,获得其化学指纹谱图信息.采用主成分分析(PCA)、聚类分析(CA)和反向传输人工神经网络(BP-ANN)对谱图信息进行分析,获得各化学型樟树叶粉末片剂的特征质谱信息,进而对不同化学型样品进行判别.结果表明,在正离子模式下,SDAPCI-MS能快速获取樟树的化学指纹谱图;PCA分析中的PC1,PC2和PC3贡献率分别为79.9%,12.9%和4.2%,共计97.0%.SDAPCI-MS结合CA和BP-ANN测试样本准确率均为100%,能够快速、有效地判别出樟树化学型.     

表面解吸常压化学电离质谱快速分析六味地黄丸

采用新型表面解吸常压化学电离(Surface Desorption Atmospheric Pressure Chemical Ionization, SDAPCI)质谱法, 在敞开环境下, 对潮湿的空气进行电晕放电产生试剂离子, 进而在六味地黄丸表面发生解吸电离过程, 在无需复杂预处理的前提下对六味地黄丸中的待测物进行离子化, 从而获得了六味地黄丸在正负离子模式下的化学指纹图谱, 并利用主成分分析法对质谱指纹数据进行处理, 可对6个厂家生产的多个批次产品进行较好的区分. 结果表明, SDAPCI-MS技术能够快速测定六味地黄丸的剂型和生产厂家信息, 并能够对目标组分做多级串联质谱鉴定, 发现痕量目标组分. 研究方法可望应用于中成药药品生产质量控制和成品检测等领域.     

Studies of kidney stones using INAA,EDXRF and XRD techniques

Four kidney stones collected from patients being treated in the Advance Urology Centre of PGIMR, Chandigarh were characterized using instrumental neutron activation analysis (INAA), energy dispersive X-ray fluorescence (EDXRF) and X-ray diffraction (XRD) techniques. For INAA, samples were irradiated in tray rod facility of Dhruva reactor, Mumbai and pneumatic fast transfer system of KAMINI reactor, IGCAR, Kalpakkam. Radioactive assay was carried out using HPGe detector coupled to 8k channel analyzer. Elements determined in the samples by INAA are Zn, Sr, Co, Fe, Cr, Sc, Se, Na and Mn. EDXRF was used for the quantification of Ca. XRD patterns showed that three of the kidney stones are calcium oxalate stone and the other one is uric acid stone. The concentrations of trace elements in general were found to be higher in calcium oxalate stones and positive correlation was observed in the concentrations of Ca with Sr and Zn.     

表面解吸化学电离质谱法快速检测蔬菜中痕量氨基甲酸酯

采用自行研制的表面解吸常压化学电离源（SDAPCI）,首次在无需样品预处理的前提下用质谱法直接测定了多种蔬菜表面残留的痕量氨基甲酸酯,并用串联质谱对所获得的不同氨基甲酸酯农药的离子进行了结构鉴定,排除了检测结果的假阳性。该方法对待测样品无污染,方法检测限低于10－14g/cm2,单个样品的测定时间平均少于1 s,特别适合于对批量样品进行快速检测。     

Field-induced wooden-tip electrospray ionization mass spectrometry for high-throughput analysis of herbal medicines

This study demonstrates the first application of field-induced wooden-tip electrospray ionization (ESI) mass spectrometry (MS) for high-throughput analysis of herbal medicines. By application of an opposite and sample-contactless high voltage on the MS inlet rather than wooden tips, a high-throughput analysis device is easily set up, and a relatively fast analysis speed of 6 s per sample was successfully achieved. In addition, fast polarity switching between positive and negative ion detection mode is readily accomplished, which provides more complete chemical information for quality assessment and control of herbal medicines. By using the proposed method, various active ingredients present in different herbal medicines were rapidly detected, and the obtained mass spectra were served as the samples' fingerprints for tracing the origins, establishing the authenticity, and assessing the quality consistency and stability of herbal medicines. Our experimental results demonstrated that field-induced wooden-tip ESI-MS is a desirable method for high-throughput analysis of herbal medicines, with promising prospects for rapidly differentiating the origin, determining the authenticity, and assessing the overall quality of pharmaceuticals.     

Electrospray ionization mass spectrometry fingerprinting of perfumes: Rapid classification and counterfeit detection

A fast procedure to classify perfumes and identify counterfeit samples is described. Dilution of a few microL of the sample in a 1:1 methanol/water solution is followed by detection of its major polar components via direct infusion electrospray ionization mass spectrometry (ESI-MS) in the positive ion mode. As proof-of-principle cases, three famous brands of perfumes were used. The ESI+-MS fingerprints of authentic samples were very characteristic, showing distinctive sets of polar markers for each sample. Principal component analysis (PCA) placed samples of the three perfume brands in well-defined groups. Counterfeit samples were also clearly detected owing to contrasting ESI-MS fingerprints, with PCA placing these samples far away from the authentic samples.     

Adhesion properties of uric acid crystal surfaces

Two key steps in kidney stone formation--crystal aggregation and attachment to renal tissues--depend on the surface adhesion properties of the crystalline components. Anhydrous uric acid (UA) is the most common organic crystalline phase found in human kidney stones. Using chemical force microscopy, the adhesion force between various functional groups and the largest (100) surface of UA single crystals was measured in both aqueous solution and model urine. Adhesion trends in the two solutions were identical, but were consistently lower in the latter. Changes in the solution ionic strength and pH were also found to affect the magnitude of the adhesion. UA surfaces showed the strongest adhesion to cationic functionalities, which is consistent with ionization of some surface uric acid molecules to urate. Although hydrogen-bonding and van der Waals interactions are usually considered to be dominant forces in the association between neutral organic compounds, this work demonstrates that electrostatic interactions can be important, particularly when dealing with weak acids under certain solution conditions.     

Chemical fingerprinting of Shexiang Baoxin Pill and simultaneous determination of its major constituents by HPLC with evaporative light scattering detection and electrospray mass spectrometric detection

High-performance Liquid Chromatography (HPLC) with evaporative light scattered detection (ELSD) and electrospray ionization mass spectrometric detection (ESI-MS) was employed to establish chemical fingerprint of Shexiang Baoxin Pill (SBP) and to simultaneously determinate its seven major constituents, including cholic acid, deoxycholic acid, ursodeoxycholic acid, chenodeoxycholic acid, cinobufagin, recibufogenin, and ginsenoside Rb1. The analysis was performed on a C18 column with water-acetonitrile gradient elution, and the investigated constituents were authenticated by comparing their retention times and mass spectra with those of reference compounds. The proposed method was applied to analyze nine SBP samples and produced data with acceptable linearity, precision, stability and accuracy. Both the chemical fingerprints and quantification data were used to evaluate the quality of various SBP products. The proposed method allows obtaining chemical fingerprint and quantification of multi-components in one run, and therefore can be readily utilized as a comprehensive quality control approach for traditional Chinese medicine.     

表面解吸常压化学电离质谱法直接测定火锅底料中的痕量可卡因

采用表面解吸常压化学电离(SDAPCI)质谱法, 在无需样品预处理情况下, 直接测定了火锅底料中可卡因的含量. 采用取样针取样, 单次取样量在纳升级, 单个样品测定时间少于0.5 min, 回收率为92.9%～106.6%; 相对标准偏差(RSD)为4.7%～11.6%; 可卡因的检出限可达1.5×10-12 g/mL. 该方法适用于批量火锅底料等食品类样品的快速半定量检测.     

Combination of several mass spectrometry ionization modes: a multiblock analysis for a rapid characterization of the red wine polyphenolic composition

In the present study, direct flow injection mass spectrometry was investigated for rapid characterization of the polyphenolic composition of red wines. Atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI) (in both positive and negative ion modes) have been simultaneously used for a more comprehensive analysis of the samples studied. In this way, four mass spectra have been recorded for each wine. Each spectrum was considered as a fingerprint related to the chemical composition. This methodology was applied to a large number of Beaujolais wines from different grades and different vintages.This data set was processed using a chemometrical multiblock analysis, which allowed to synthesize the whole information collected. The results obtained showed that the wine fingerprints address the composition of the main polyphenolic compounds present in the red wines and can discriminate groups of wines showing different polyphenolic compositions. Multiblock analysis appears as a very promising tool to deal with several data tables of multivariate signals in order to define, by combining the whole information, the best operating protocol according to the desired analytical objectives.     

表面解吸常压化学电离质谱法直接测定奶粉中三聚氰胺

应用表面解吸常压化学电离(SDAPCI)质谱法,在无需样品预处理的情况下,直接测定了奶粉中三聚氰胺,并用串联质谱法对测定结果进行了鉴定.采用手动进样,单个样品测定时间少于0.5 min,回收率为86.7%～112.8%;相对标准偏差(RSD)为4.3%～10.3%;对奶粉中三聚氰胺的检出限为8.8 μg/kg.方法适用于批量样品的快速半定量检测.     

Determination of fluoride ions in urinary stones by ion chromatography

A method of the ion chromatographic determination of fluoride ions in urinary stones has been developed. Sample preparation of solid mineral-organic samples includes dissolution in concentrated hydrochloric acid, dilution with deionized water, and the elimination of excess calcium and magnesium cations by adding a KU-2 sulfo cation exchanger in the H-form to samples and filtration through a membrane filter. Anions were separated on a Shim-pack IC-AIS anion-exchange column (100 × 4.6 mm) with elution with a mixture of 2.0 mM phthalic acid and 1.2 mM sodium hydroxide (pH 3.5). The linearity range of the fluoride ions in the obtained solutions of urinary stones with conductometric detection was 0.01–300 mg/L, the limit of detection calculated by the 3s-test was 0.004 mg/L. The quantitative determination of fluoride ions in 20 samples of urinary stones was performed; in 80% of cases the presence of fluorides in the stones at a level from 0.01 to 4 mg/g of the stone was detected. The average concentration of the fluoride ions was 0.3 mg/g of stone. For 20% of the samples an elevated concentration of fluoride ions compared to the average one was found.     

Metabolic profiling comparison of isovitexin in normal and kidney stone model rats by ultra‐high‐performance liquid chromatography coupled to quadrupole time‐of‐flight mass spectrometry

Isovitexin, a bioactive flavonoid constituent isolated from Desmodii Styracifolii, is considered an adjuvant for antiurolithiasis diseases. In this study, an ultra‐high‐performance liquid chromatography coupled with hybrid triple quadruple time‐of‐flight mass spectrometry method was developed to characterize and compare the metabolic profiling of isovitexin experimented on normal and kidney stone model rats. The comparative research indicated that 28 metabolites (18 phase I and 10 phase II) in normal rats and 33 metabolites (20 phase I and 13 phase II) in kidney stone model rats were initially identified. The results of relative quantitative determination reflected that the contents of metabolites produced by deglycosylation, reduction, and isomerization in kidney stone model rats were greater than those in healthy rats. Instead, the levels of oxidative and dehydrogenated metabolites in normal groups were higher than those in kidney stone model groups. The results of this study are valuable and important for understanding the metabolic process of isovitexin in clinical application, and especially the metabolism study in kidney stone model rats could provide a beneficial reference for the further search of effective substances associated with the treatment of kidney stones.     

Thermal, UV, FTIR, and XRD studies of urinary stones

Various crystals are seen in human urine. Oxalate, Phosphate, Uric acid, and Urate crystals are generally seen in urinary calculi. Calcium stones are most common, comprising 75 % of all urinary calculi. They may be pure calcium oxalate or calcium phosphate or a mixture of both. Many stones are not homogeneous. Low calcium intake increases the intestinal absorption of calcium, thus decreasing the amount of calcium available in the intestinal tract to form insoluble complexes with Oxalate. Consequently, a higher amount of oxalate is available for intestinal absorption and as a result, urinary oxalate excretion increases. Mineral water consumption did not reduce urinary oxalate excretion. High urinary excretion and concentration of magnesium decrease both the nucleation and growth rates of calcium oxalate crystals in urine, because of the higher solubility of magnesium oxalate compared with calcium oxalate. Analytical results show calcium oxalate to be one of the major inorganic components of renal stones and found to be present in almost all kidney and bladder stones. About 39.5 % of the total composition of the calculi is found to contain purely calcium oxalate and also hydroxyl apatite. The ten samples are a mixture of calcium oxalate and phosphate stones. Four samples are calcium oxalate as major composition and the remaining are calcium phosphate as major composition. These kidney stones are taken photographically and size of the stone are measured using optical microscopy. These qualitative analyses are also confirmed by UV, FTIR, DSC, and XRD analysis.     

草酸钙型尿结石病人结石和尿液微晶的形貌特征分析

泌尿系结石是临床上的常见病和多发病,可生长于肾盂、肾实质、输尿管以及膀胱中,较大的结石常会导致尿道阻塞、感染甚至肾脏坏死等病变,是一种严重危害人体健康的泌尿系统疾病。尿结石是动物体内异常生物矿化的产物,其主要成分有草酸钙、磷酸铵镁、尿酸等,其中以草酸钙最为常见。本研究直接取肾结石病人排出体外的自然结石和尿液中的结石微晶作为研究对象,采用透射电子显微镜、扫描电子显微镜、X-射线衍射分析和傅立叶变换红外光谱等手段对尿结石进行表征分析。研究结果表明,尿液中的纳米微晶的聚集是导致微晶快速增大和结石形成的关键因素,通过调控纳米微晶的物理化学性质有可能抑制肾结石的形成和复发。     

Sampling analytes from cheese products for fast detection using neutral desorption extractive electrospray ionization mass spectrometry

The development of analytical techniques suitable for sensitive, high-throughput, and nondestructive food analysis has been of increasing interest in recent years. In this study, mass-spectral fingerprints of various cheese products were rapidly recorded in the mass range of m/z 50–300 Da without any sample pretreatment, using neutral desorption extractive electrospray ionization mass spectrometry (ND-EESI-MS) in negative ion mode. The results demonstrate that both volatile and nonvolatile analytes on greasy cheese surfaces can be directly sampled by a neutral desorption gas beam. The influence of the neutral desorption gas flow on the analyte signal was systematically investigated. Under optimized experimental conditions, reproducible results were obtained using ND-EESI-MS. Principal component analysis was applied to differentiate a total of 49 individual cheese samples (four different types), which were purchased from three different supermarkets. All samples were successfully classified according to their types; but distributors and sensory properties were not distinguishable from the spectra data. The principal components 2, 3, and 4 scores showed an excellent capacity of distinguishing types of cheese. Molecular markers of interest can be identified using tandem mass spectrometry and matching the data with those from reference compounds. The experimental data show that ND-EESI-MS is able to sensitively and directly detect analytes on greasy surfaces without chemical contamination, providing a convenient method for high-throughput food analysis with a high degree of safety.     

Analysis of renal stones by FTIR spectroscopy

A study of the chemical composition of renal stones is important for understanding their etiology. And the therapy for the stone disease is usually based on the analysis of calculi, permitting a porper management of the disease and the prevention of its recurrence. FTIR spectroscopy has been used for urinary stones analysis. The routine, easy and rapid measurements give unambiguous information about the stone composition. Especially a precise wavelength scale of the Fourier method is helpful here. A relatively good spatial resolution is important as very often the stones are composed of core and various layers of different chemical composition. A quantitative determination of the proportion of various materials in calculi is also possible.     

Use of a porous silicon–gold plasmonic nanostructure to enhance serum peptide signals in MALDI-TOF analysis

Small peptides in serum are potential biomarkers for the diagnosis of cancer and other diseases. The identification of peptide biomarkers in human plasma/serum has become an area of high interest in medical research. However, the direct analysis of peptides in serum samples using mass spectrometry is challenging due to the low concentration of peptides and the high abundance of high-molecular-weight proteins in serum, the latter of which causes severe signal suppression. Herein, we reported that porous semiconductor-noble metal hybrid nanostructures can both eliminate the interference from large proteins in serum samples and significantly enhance the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) yields of peptides captured on the nanostructure. Serum peptide fingerprints with high fidelity can be acquired rapidly, and successful discrimination of colorectal cancer patients based on peptide fingerprints is demonstrated.     

Lipidomics based on liquid chromatography-high resolution mass spectrometry reveals the protective role of peroxisome proliferator-activated receptor alpha on kidney stone formation in mice treated with glyoxylate

Few studies have examined the relationship between lipid metabolism and kidney stone formation, particularly the role of key lipid regulatory factors in kidney stone formation. We evaluated the effect of the lipid regulatory factor-peroxisome proliferator-activated receptor alpha on the formation of renal stones in mice by injecting them with glyoxylate followed by treatment with either a peroxisome proliferator-activated receptor alpha agonist fenofibrate or an antagonist GW6471 (GW). Liquid chromatography coupled with trapped ion mobility spectrometry-quadrupole-time-of-flight mass spectrometry-based lipidomics was used to determine the lipid profile in the mouse kidneys. Histological and biochemical analyses showed that the mice injected with glyoxylate exhibited crystal precipitation and renal dysfunction. Crystallization decreased significantly in the fenofibrate group, whereas it increased significantly in the GW group. A total of 184 lipids, including fatty acyls, glycerolipids, glycerophospholipids, and sphingolipids differed significantly between the mice in the model and control groups. Peroxisome proliferator-activated receptor alpha activity negatively correlated with glyoxylate-induced kidney stone formation in mice, which may be related to improved fatty acid oxidation, maintenance of ceramide/complex sphingolipids cycle balance, and alleviation of disorder in phospholipid metabolism.     

Urine Metabolic Fingerprints Encode Subtypes of Kidney Diseases

Metabolic fingerprints of biofluids encode diverse diseases and particularly urine detection offers complete non‐invasiveness for diagnostics of the future. Present urine detection affords unsatisfactory performance and requires advanced materials to extract molecular information, due to the limited biomarkers and high sample complexity. Herein, we report plasmonic polymer@Ag for laser desorption/ionization mass spectrometry (LDI‐MS) and sparse‐learning‐based metabolic diagnosis of kidney diseases. Using only 1 μL of urine without enrichment or purification, polymer@Ag afforded urine metabolic fingerprints (UMFs) by LDI‐MS in seconds. Analysis by sparse learning discriminated lupus nephritis from various other non‐lupus nephropathies and controls. We combined UMFs with urine protein levels (UPLs) and constructed a new diagnostic model to characterize subtypes of kidney diseases. Our work guides urine‐based diagnosis and leads to new personalized analytical tools for other diseases.