Layer-by-layer self-assembly of multiwalled carbon nanotube polyelectrolytes prepared by in situ radical polymerization

Anionic and cationic multiwalled carbon nanotube polyelectrolytes, prepared by covalent modification of multiwalled carbon nanotubes (MWCNTs) with poly(acrylic acid) and poly(acrylamide), were used for the layer-by-layer (LBL) self-assembly of MWCNTs on different substrates with polyelectrolytes, such as poly(diallyldimethylammonium chloride) and sodium poly(styrenesulfonate). Thermogravimetric analysis, Raman spectroscopy, and scanning electron microscopy (SEM) were used to demonstrate the modification of MWCNTs. Investigations using Fourier transform infrared spectroscopy, atomic force microscopy, SEM, and ultraviolet-visible spectroscopy proved this method to be practicable for preparing LBL films.     

Dispersing and functionalizing multiwalled carbon nanotubes in TiO2 sol

We report that oxidized multiwalled carbon nanotubes (MWCNTs) can be synchronously dispersed and functionalized in TiO2 sol via an in situ sol-gel process. Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and atomic force microscopy (AFM) were used to characterize the functionalized MWCNTs. The results revealed that the hydrolysis and condensation originated from Ti(OC4H9)4 molecules favor the dispersion of MWCNTs in as-prepared TiO2 sol. Based on the strong interaction between the oxidized MWCNTs and TiO2 sol during the in situ sol-gel process, MWCNT (core)-TiOx (shell) tubular composites and TiO2 nanotubes can be obtained through filtrating, washing, and annealing of this kind of TiO2 sol containing functionalized MWCNTs, as revealed by TEM, XPS, Raman spectroscopy, and redispersion experiment. By casting the dilute dispersion of functionalized MWCNTs onto a hydrophilic Si surface, discrete and individual nanotubes can be observed by AFM.     

Covalent surface functionalization of multiwalled carbon nanotubes through bergman cyclization of enediyne‐containing dendrimers

A method for covalent functionalization of multiwalled carbon nanotubes (MWCNTs) was developed using the free radicals generated through Bergman cyclization of enediyne‐containing compounds. Four enediyne‐bearing Frechet type dendrimers were synthesized in good quantities and characterized. Then, the enediyne‐containing molecules were reacted with MWCNTs in N‐methyl‐2‐pyrrolidinone at 206 °C under nitrogen. The structure and morphology of the resulting products were characterized by thermogravimetric analysis, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and transmission electron microscopy. The dendrimer‐functionalized MWCNTs showed good solubility/dispersibility in common organic solvents and polymer solutions. They were used in the formation of polymer composites through electrospinning with polycaprolactone. The results confirmed the surface functionalization of MWCNTs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rapid, one-pot synthesis of highly-soluble carbon nanotubes functionalized by L-arginine

Functionalization of carbon nanotubes (CNTs) is a necessary step to exploit their valuable properties. Due to having several steps and especially acid treatment, most of current methods of functionalization result in irrecoverable defects on CNTs structure. Here, multiwalled carbon nanotubes (MWCNTs) were functionalized with L-arginine in a simple, one-pot and rapid microwave-assisted technique without any acid treatment step. The CNT functionalities were analyzed with infrared spectroscopy, thermogravimetric analysis, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results confirmed the covalent functionalization of L-arginine with very low defects on CNTs. Also it is found that increase of input powers of microwave in the range 500–900 W, monotonically increase the degree of functionalization. The maximum dispersibility of MWCNT was found ～1.03 mg/mL corresponding to 900 W irradiation. Accounting considerable low treatment time, the method may be applied for large-scale solubilization of MWCNTs in an industrial scale.     

Properties of matrix-grafted multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposites synthesized by in situ reversible addition-fragmentation chain transfer polymerization

Multi-walled carbon nanotubes (MWCNT)/poly(methyl methacrylate) (PMMA) nanocomposites were synthesized by the in situ reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in the presence of MWCNTs, at which the bulk polymer was grafted onto the surface of nanotubes through the ??grafting through?? strategy. For this purpose, MWCNTs were formerly functionalized with polymerizable MMA groups. MMA and PMMA-grafted MWCNTs were characterized by Fourier-transform infrared spectroscopy, Raman, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Dissolution of nanotubes was examined in chloroform solvent and studied by UV?Cvis spectroscopy. Thermogravimetric and degradation behavior of prepared nanocomposites was investigated by TGA. MWCNTs had a noticeable boosting effect on the thermal stability of nanocomposites. TGA thermograms showed a two-step weight loss pattern for the degradation of MWCNT-PMMA/PMMA nanocomposites which is contrast with neat PMMA. Introduction of MWCNTs also improved the dynamic mechanical behavior and electrical conductivity of nanocomposites. TEM micrograph of nanocomposite revealed that the applied methods for functionalization of nanotubes and in situ synthesis of nanocomposites were comparatively successful in dispersing the MWCNTs in PMMA matrix.     

聚乙酰苯胺修饰碳纳米管载铂催化剂对甲醇电催化氧化

以原位化学聚合的聚乙酰苯胺/多壁碳纳米管(PAANI-MWCNTs)复合纳米材料作为载体,采用硼氢化钠还原法将Pt纳米粒子担载到PAANI-MWCNTs复合纳米材料表面,制备了Pt/PAANI-MWCNTs复合纳米催化剂.样品的结构和形貌用紫外-可见(UV-Vis)光谱、拉曼光谱、扫描电镜(SEM)、透射电镜(TEM)和X射线衍射(XRD)进行了表征.结果表明,聚乙酰苯胺与碳纳米管之间存在较强的π-π相互作用,使其能牢固地吸附于多壁碳纳米管表面,对碳纳米管的结构完整性和导电性有一定的改善作用.同时,金属Pt纳米颗粒较为均匀地分散在PAANI-MWCNTs表面,粒径分布范围较窄.采用循环伏安法和计时电流法在酸性溶液中研究了Pt/PAANI-MWCNTs催化剂对甲醇的电催化氧化活性,结果表明Pt/PAANI-MWCNTs复合纳米催化剂比用混酸处理的碳纳米管载铂催化剂对甲醇呈现出更高的电催化氧化活性和更好的抗中毒能力及稳定性.     

Polymer coating of carboxylic acid functionalized multiwalled carbon nanotubes via reversible addition‐fragmentation chain transfer mediated emulsion polymerization

In this work, successful polymer coating of COOH‐functionalized multiwalled carbon nanotubes (MWCNTs) via reversible addition fragmentation chain transfer (RAFT) mediated emulsion polymerization is reported. The method used amphiphilic macro‐RAFT copolymers as stabilizers for MWCNT dispersions, followed by their subsequent coating with poly(methyl methacrylate‐co‐butyl acrylate). Poly(allylamine hydrochloride) was initially used to change the charge on the surface of the MWCNTs to facilitate adsorption of negatively charged macro‐RAFT copolymer onto their surface via electrostatic interactions. After polymerization, the resultant latex was found to contain uniform polymer‐coated MWCNTs where polymer layer thickness could be controlled by the amount of monomer fed into the reaction. The polymer‐coated MWCNTs were demonstrated to be dispersible in both polar and nonpolar solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Advantages of immobilization of Pt nanoparticles protected by dendrimers on multiwalled carbon nanotubes

Pt nanoparticles (PtNPs) were synthesized in the presence of a NH(2)-terminated fourth generation poly(amido amine) (PAMAM) dendrimer as a stabilizer at different molar ratios (M:D) of metal precursor to amine terminal group of dendrimer. Subsequently, PtNPs protected by dendrimers (DENPtNPs) were covalently immobilized on multiwalled carbon nanotubes (MWCNTs) by using a condensing agent for amide bond formation between acid-treated MWCNTs and DENPtNPs and the product CNT/DENPtNPs were characterized. PtNPs on MWCNTs increased quantitatively in content with M:D and dispersed with same aspect as the dispersion of DENPtNPs in water: PtNPs homogeneously dispersed at low M:D ratio and slightly aggregated at high ratio. The decomposition of CNT/DENPtNPs occurred at the lower temperature owing to the catalytic effect of PtNPs. A near-infrared absorption band around 2083 nm, which is extremely weak for MWCNTs, was intensified and D, D' and G Raman bands were slightly downshifted when DENPtNPs were attached. These phenomena can be attributed to the electron transfer from DENPtNPs to MWCNTs. Remarkable advantage is apparent from the enhanced electrochemical behavior of CNT/DENPtNPs loaded on gold electrode. PtNPs promoted the electron transfer of MWCNTs and dendrimers contributed to uptake of redox materials.     

Allyloxyporphyrin‐Functionalized Multiwalled Carbon Nanotubes: Synthesis by Radical Polymerization and Enhanced Optical‐Limiting Properties

Allyloxyporphyrin‐functionalized multiwalled carbon nanotubes (MWCNT‐TPP) were synthesized by radical polymerization and characterized by FTIR, UV/Vis absorption, and X‐ray photoelectron spectroscopy; elemental analysis; TEM; and thermogravimetric analysis. Z‐scan studies revealed that this nanohybrid exhibits enhanced nonlinear optical (NLO) properties compared to a control sample consisting of a covalently unattached physical blend of MWCNTs and porphyrin, as well as to the separate MWCNTs and porphyrin. At the wavelengths used, the mechanism of enhanced optical limiting likely involves reverse saturable absorption, nonlinear scattering, and photoinduced electron/energy transfer between the MWCNTs and the porphyrin. The role of electron/energy transfer in the NLO performance of MWCNT‐TPP was investigated by Raman and fluorescence spectroscopy.     

Synthesis and characterization of pyrene bearing amphiphilic miktoarm star polymer and its noncovalent interactions with multiwalled carbon nanotubes

A novel amphiphilic miktoarm star polymer, polystyrene‐poly(ethylene glycol)‐poly(methyl methacrylate), bearing a pyrene group at the end of PS arm (Pyrene‐PS‐PEG‐PMMA) was successfully synthesized via combination of atom transfer radical polymerization and click chemistry. The structure and composition of the amphiphilic miktoarm star polymer were characterized by gel permeation chromatography and ¹H NMR. The functionalization of multiwalled carbon nanotubes (MWCNTs) via “π–π” stacking interactions with pyrene‐PS‐PEG‐PMMA miktoarm star polymer was accomplished and the resulting polymer‐MWCNTs hybrid was analyzed by using ¹H NMR, UV–vis, fluorescence spectroscopy, and thermal gravimetric analysis. The high‐resolution transmission electron microscopy and analytical techniques aforementioned confirmed that the noncovalent functionalization of MWCNT's with the amphiphilic miktoarm star polymer was successfully achieved. The MWCNT/pyrene‐PS‐PEG‐PMMA exhibited significant dispersion stability in common organic solvents such as dimethyl formamide, chloroform, and tetrahydrofuran. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of polyethylene‐grafted multiwalled carbon nanotubes via a peroxide‐initiating radical coupling reaction and by using well‐defined TEMPO and thiol end‐functionalized polyethylenes

Polyethylene (PE), alkoxyamine‐ and thiol‐terminated PEs (PE‐TEMPO and PE‐SH, respectively) can be converted to macroradicals using a peroxide, a thermal cleavage of the alkoxyamine and a hydrogen transfer reaction of the thiol, respectively. The addition of these macroradicals to multiwalled carbon nanotubes (MWCNTs) were compared by performing grafting reactions at 160 °C in 1,3‐dichlorobenzene as solvent. Raman spectroscopy was utilized to follow the introduction of PE on the MWCNTs' surface while thermogravimetric and elemental analysis indicated the extent of this grafting. The grafting ratio was found to be in the range of 19–36 wt %. PE‐functionalized MWCNTs were imaged by transmission electronic microscopy showing a PE layer with various thicknesses covering the surface of nanotubes. It was found that higher levels of grafting were obtained using PE‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy and PE‐SH rather than a radical grafting reaction in which dicumyl peroxide, PE, and MWCNTs were reacted. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Surface functionalization of multiwalled carbon nanotubes by the photo‐responsive strategy of π‐π stacking and azide‐grafting

In this communication, we report a new, simple, and eco‐friendly method to develop highly dispersible multiwalled carbon nanotubes (MWCNTs) by π‐π stacking and azide‐grafting. MWCNTs were functionalized via standard physisorption, followed by nitrene addition using azido compounds upon ultraviolet activation. The functionalized MWCNTs show excellent dispersibility without raising distinct damage, which can bear comparison with that of MWCNTs oxidized with mixture acids. This method allows for the improvement of the chemical compatibility of MWCNTs with specific polymers for application in nanotube‐based composites and opens a potential pathway for surface protection.     

Oxidation, deformation, and destruction of carbon nanotubes in aqueous ceric sulfate

A simple wet chemical method involving only ultrasonic processing in dilute ceric sulfate (CS) was used to functionalize carbon nanotubes (CNTs). Unexpectedly, single-walled and multiwalled carbon nanotubes (SWCNTs and MWCNTs) were cut, oxidized, and disintegrated by sonication in 0.1 N CS for 2-5 h. Transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction spectroscopy (XRD), Raman scattering, and photoacoustic Fourier transform infrared spectroscopy (FTIR) were used to probe wall damage during the chemical processing. Cyclic voltammetry and impedance spectroscopy were used to evaluate the conductivity of the CS-treated CNTs. This one-step process resulted in the destruction of SWCNTs to produce nonconducting amorphous carbon. MWCNTs were oxidized and converted to graphitic materials and amorphous carbon with retained conductivity.     

Facile and controllable assembly of multiwalled carbon nanotubes on polystyrene microspheres

Herein a facile and controllable heterocoagulation between polystyrene （PS） microspheres and multiwalled carbon nanotubes （MWCNTs） is introduced based on colloid thermodynamics. The MWCNTs play the role of steric stabilizer for stabilizing the metastable PS microspheres and thus immobilize spontaneously on the surface of PS microspheres. The synthesized MWCNTs-coated PS composite particles have been extensively characterized by scanning electron microscopy, transmission electron microscopy, thermogravimetry and Raman spectroscopy. The results indicate that the structure and morphology of the resultant MWCNTs-coated PS composite particles are significantly affected by the weight ratio of PS and MWNCTs and the amount of poly（vinylpyrrolidone） that is injected into PS dispersion before they are mixed with MWCNTs. Therefore, these composite particles have the potential to produce MWCNTs-based composite materials with controllable mass loading and dispersity of MWCNTs.     

Functionalized carbon nanomaterials as nanocarriers for loading and delivery of a poorly water-soluble anticancer drug: a comparative study

Carbon nanomaterials such as multiwalled carbon nanotubes (MWCNTs) and graphene oxide (GO) have been functionalized by highly hydrophilic and biocompatible poly(vinyl alcohol) (PVA) for loading and delivery of an anticancer drug, camptothecin (CPT). For the first time, CPT was loaded onto MWCNT-PVA and GO-PVA through π-π interactions and its capability to kill human breast and skin cancer cells was investigated.     

Electrospinning of polyvinylidene difluoride with carbon nanotubes: synergistic effects of extensional force and interfacial interaction on crystalline structures

Polyvinylidene difluoride (PVDF) solutions containing a very low concentration of single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) of similar surface chemistry, respectively, were electrospun, and the nanofibers formed were collected using a modified rotating disk collector. The polymorphic behavior and crystal orientation of the nanofibers were studied using wide-angle X-ray diffraction and infrared spectroscopy, while the nanotube alignment and interfacial interactions in the nanofibers were probed by transmission electron microscopy and Raman spectroscopy. It is shown that the interfacial interaction between the SWCNTs and PVDF and the extensional force experienced by the nanofibers in the electrospinning and collection processes can work synergistically to induce highly oriented beta-form crystallites extensively. In contrast, the MWCNTs could not be well aligned along the nanofiber axis, which leads to a lower degree of crystal orientation.     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Electrochemical production, characterization, and application of MWCNTs

The subject of this study is production of carbon nanotubes (CNTs) using an original procedure of reduction of lithium molten salts onto graphite cathode; their structural characterization and application as support material for electrocatalysts aimed for hydrogen evolution. As-produced CNTs were characterized by means of scanning and transmission electron microscopy (SEM and TEM), Raman spectroscopy, and thermogravimetric and differential thermal analysis (DTA). SEM and TEM images have shown that nanotubes are mostly of curved shape with length of 1–20 μm and diameter of 20–40 nm. Raman peaks indicate that the crystallinity of produced nanotubes is rather low. The obtained results suggest that formed product contains up to 80 % multiwalled carbon nanotubes (MWCNTs), while the rest being non-reacted graphite and fullerenes. DTA curves show that combustion process of the nanotubes takes place in two stages, i.e., at 450 and 720 °C. At the lower temperature, combustion of MWCNTs occurs, while at higher one, fullerenes and non-reacted graphite particles burn. As-produced MWCNTs were used as electrocatalyst’s support materials and their performance was compared with that of traditional carbon support material Vulcan XC-72. MWNTs have shown almost twice higher real surface area, and electrocatalyst deposited on them showed better catalytic activity than corresponding one deposited on Vulcan XC-72.     

Preparation and Characterization of Poly(methyl methacrylate)-functionalized Carboxyl Multi-wall Carbon Nanotubes

"An in situ polymerization process was used to prepare poly (methyl methacrylate) (PMMA)-functionalized carboxyl multi-walled carbon nanotubes using carboxylate carbon nanotubes and methyl methacrylate as reactants and benzoyl peroxide as an initiator agent. The functionalized multi-walled carbon nanotubes were characterized using transmission electron microscope, scanning electron microscope, nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis and Raman. The results indicate that the PMMA chains are covalently linked with the surface of carboxylate carbon nanotubes. The surface morphology is controlled by the content of carboxylate carbon nanotubes in the reactants. The PMMA functionalized multi-walled carbon nanotubes are soluble in deuterated chloroform. The storage modulus and tanffi magnitude increase as the content of CCNTs increases up to 0.3%."     

Pt–Ni alloy nanoparticles supported on multiwalled carbon nanotubes for methanol oxidation in alkaline media

The Pt–Ni alloy nanoparticles with different Pt/Ni atomic ratios supported on functionalized multiwalled carbon nanotubes surface were synthesized via an impregnation-reduction method. The nanocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques. XRD demonstrated that Pt was alloyed with Ni. TEM showed that the Pt–Ni alloy nanoparticles were uniformly dispersed on the multiwalled carbon nanotubes (MWCNTs) surface, indicating appropriate amount of Ni in Pt–Ni alloy which facilitates the dispersion of nanoparticles on the MWCNT surface. XPS revealed that the Pt 4f peak in Pt–Ni/MWCNT (4:1) catalyst shifted to a lower binding energy compared with Pt/MWCNT catalyst, and nickel oxides/hydroxides such as NiO, Ni(OH)₂, and NiOOH were on the surface of Pt–Ni nanoparticles. Electrochemical data based on cyclic voltammetry and chronoamperometric curves indicated that Pt–Ni (4:1) alloy nanoparticles exhibited distinctly higher activity and better stability than those of Pt/MWCNTs toward methanol oxidation in alkaline media.