共查询到20条相似文献,搜索用时 15 毫秒
1.
Dextran, a water-soluble, biocompatible polymer of glucose, was modified at its hydroxyls with arylboronic esters to make it soluble in common organic solvents, allowing for the facile preparation of oxidation-sensitive dextran (Oxi-DEX) carrier microparticles. These particles were found to release their payload with a half-life of 36 min at 1 mM H2O2, which can be compared with a half-life of greater than 1 week in the absence of H2O2. When used in a model vaccine application, Oxi-DEX particles loaded with ovalbumin (OVA) increased the presentation to CD8+ T-cells 27-fold relative to OVA encapsulated in a classical vehicle not sensitive to oxidation. No presentation was observed from cells incubated with unencapsulated OVA. Additionally, Oxi-DEX was found to be nontoxic in preliminary in vitro cytotoxicity assays. Because it is easy to prepare, sensitive to biological oxidation, and biocompatible, this material may represent an attractive new platform for selective delivery applications. 相似文献
2.
Bovine Cu,Zn-SOD was chemically modified with an end-group aminated dextran derivative using a water-soluble carbodiimide as coupling agent. The enzyme retained 81% of the initial catalytic activity after the attachment of about 4.4 mol of polymer per protein subunit. The anti-inflammatory activity of the SOD was two times increased after conjugation with dextran. The modified enzyme was remarkably more resistant to inactivation by H(2)O(2) and its plasma half-life time was prolonged from 4 min to 3.2 h. 相似文献
3.
Bovine serum albumin (BSA) hollow microcapsules were fabricated through glutaraldehyde (GA) mediated covalent layer-by-layer
assembly. The GA cross-linking of the adsorbed BSA on the colloidal particles enabled their surfaces to be covered by reactive
aldehyde groups, which reacted with BSA molecules to result in another covalently linked layer. Repeating of this cycle could
then yield particles coated with BSA multilayers. Hollow microcapsules well dispersed in water were obtained after core removal.
The good integrity and morphology of the BSA capsules were confirmed and characterized by confocal laser scanning microscopy,
scanning electron microscopy and scanning force microscopy. The obtained BSA microcapsules possess reversible pH response,
i.e., the capsules are permeable to macromolecules below pH 4 or above pH 10, while impermeable in between. The mechanisms
of permeability transition were discussed. Using this property, dextran, with a molecular weight of ~155 kDa, was successfully
loaded. 相似文献
4.
Fabrice Ofridam Noureddine Lebaz milie Gagnire Denis Mangin Abdelhamid Elaissari 《先进技术聚合物》2020,31(6):1270-1279
Interpolyelectrolyte complexes or polyplexes can be seen as interesting alternatives in the purpose of active ingredients encapsulation. Working on polymethylmethacrylate derivatives with special focus on controlled oral drug delivery, the influence of charged polyelectrolytes (polyacrylic acid, polyethylenimine, and amino‐dextran) and noncharged ones (polyvinyl alcohol, dextran 40, and Pluronic F68) has been investigated on the precipitation of two pH‐sensitive Eudragit polymers, namely, L100 and E100. Moreover, the possibility of preparing polyplexes involving the two polymethylmethacrylate derivatives with different charged and noncharged secondary polyelectrolytes has been studied. The obtained dispersions have been characterized in terms of mean particle size, size distribution, zeta potential, and morphology. Direct precipitation of Eudragit L100 by medium acidification in a batch process and in the presence of polyethylenimine allowed the production of particles with a narrow size distribution. The mean size was around 200 nm. In this case, the zeta potential was found to be +45 mV at pH = 7 in 1mM aqueous NaCl solution, and the produced suspension was stable in time since no aggregation and sedimentation have been observed. A precipitation pH of 8.16 allows us to suggest the preparation of a polyplex based on Eudragit L100 and polyethylenimine. In contrary, polyvinyl alcohol has shown ability to induce an increase in particle mean size whereas other polyelectrolytes showed no significant effect. Moreover, it was observed that polyethylenimine and polyacrylic acid solutions were able to directly induce Eudragit E100 precipitation whereas amino‐dextran and noncharged polyelectrolytes showed no effect on its precipitation and on particle size distribution. 相似文献
5.
Nanosized hydroxyapatite(nsHAp) was synthesized to examine its possibility as a controlled release carrier of protein. To achieve effective protein release from nanosized hydroxyapatite, the study of the adsorptive properties of protein on nsHAp and different influence parameters such as pH, calcium, and phosphate concentrations during the adsorption process is necessary. Ovalbumin(OVA) was selected as the model of growth factors. The results show that the amount of OVA adsorbed onto nsHAp in acetic buffer(pH=3.6) is more than that in acetic buffer(pH=5.6) because of the electric interaction. The amount of OVA adsorption in phosphate buffer solution(PBS) is smaller than that in acetic buffer because of surface complexation and surface hydroxylation. The presence of Ca2 dramatically increases the adsorbed amount of OVA in acetic buffer on maintaining the same pH. Meanwhile, the release kinetics of OVA adsorbed onto nsHAp(nsHAp-OVA) was also examined. The amount of released OVA in PBS(pH=5.6) was significantly smaller than that released in solution of pH=7.0. All the results suggest that nanosized hydroxyapatite particles could be successfully used as controlled released carrier of protein. 相似文献
6.
Stable poly(methyl methacrylate) latex particles (220–360 nm in diameter) using dextran as the protective colloid were prepared
and characterized in this study. Such an emulsion polymerization system follows Smith–Ewart Case III kinetics (i.e., the average
number of free radicals per particle is greater than 0.5) due to the relatively large latex particle size. The carbohydrate
content of these dextran modified emulsion polymers shows a maximum around 5% dextran based on total monomer weight. The latex
stability during polymerization is closely related to the carbohydrate content of these latex particles, and it is controlled
by the ratio of the thickness of the dextran adsorption layer to that of the electric double layer of the latex particles.
The critical flocculation concentration (CFC) of the latex products correlates well with the latex stability during polymerization.
The greater the total scrap produced during polymerization (i.e., the stronger the bridging flocculation), the lower is the
CFC of the latex products. The affinity precipitation of concanavalin A (a model lectin used in this study) by the dextran
modified PMMA latex particles is also illustrated in this study. The specifically adsorbed concanavalin A increases with the
carbohydrate content of the dextran modified latex particles.
Received: 9 December 1996 Accepted: 8 April 1997 相似文献
7.
New divinyl-functionalized acetal-based crosslinkers were synthesized as building elements to form acid-labile microgel particles for controlled-release applications. The synthesized crosslinkers underwent hydrolysis at slightly acidic pHs in less than 1 h while they were stable at neutral pHs for longer times. HEMA was copolymerized with the crosslinkers via an inverse emulsion polymerization technique using a redox initiator system at room temperature to form crosslinked, colloidal p(HEMA) microgels. Microgels in diameters ranging from 150 to 475 nm with narrow distribution could be produced. The crosslinking density and the diameter of the microgels were found to be controlled by monomer/crosslinker feed ratio. The microgels demonstrated a pH-dependent cleavage behavior that mimicked the pH-dependent hydrolysis profile of the acid-labile crosslinkers. Model biomacromolecules, i.e., Rhodamine B-labeled dextran and BSA were efficiently loaded into the microgels. The release of the biomolecules from p(HEMA) microgels was also found to be controllable by the pH of the environment similar to the particle degradation. The protein released from the microgels was observed to retain its structural stability. 相似文献
8.
以Maillard反应制备的牛血清白蛋白-葡聚糖共价接枝物作为载体, 通过调节混合溶液的pH值和温度制备负载阿霉素的白蛋白-葡聚糖纳米粒子. 利用分子量为5×103, 10×103和62×103的葡聚糖制备了多种共价接枝物, 研究了共价接枝物分子量对载药纳米粒子的粒径和稳定性及载药量的影响. 用短链葡聚糖(分子量5×103和10×103)制备的纳米粒子粒径为60 nm左右, 用长链葡聚糖(分子量62×103)制备的纳米粒子粒径约为200 nm; 阿霉素的包埋效率为81%~98%, 包埋量为7.4%~16.9%. 细胞实验结果表明, 共价接枝物具有很好的生物相容性; 与自由阿霉素相比, 纳米粒子可以促进阿霉素进入人口腔上皮癌细胞; 受缓释性质的影响, 纳米粒子在低浓度时的细胞毒性要小于自由阿霉素. 与长链葡聚糖纳米粒子相比, 接枝度高的短链葡聚糖纳米粒子由于具有较小的粒径、 密集的葡聚糖分子刷表面、 一定的自由阿霉素浓度和较快的阿霉素释放速率, 因而更容易进入细胞并具有更好的体外抗肿瘤活性. 相似文献
9.
Light-responsive polyelectrolyte/gold nanoparticle microcapsules 总被引:1,自引:0,他引:1
We report the preparation and characterization of light-responsive delivery vehicles, microcapsules composed of multiple polyelectrolyte layers and light-absorbing gold nanoparticles. The nanostructured capsules were loaded with macromolecules (fluorescein isothiocyanate-labeled dextran) by exploiting the pH-dependence of the shell permeability, and the encapsulated material was released on demand upon irradiation with short (10 ns) laser pulses in the near-infrared (1064 nm). In addition, the polyelectrolyte multilayer shell was modified with lipids (dilauroylphosphatidylethanolamine) and then functionalized with ligands (monoclonal immunoglobulin G antibodies) for the purposes of enhanced stability and targeted delivery, respectively. We anticipate that these capsules will find application in a range of areas where controlled delivery is desirable. 相似文献
10.
Influence of pH values in the preparation of CuO-CeO2 on its catalytic performance for the preferential oxidation of CO in excess hydrogen
下载免费PDF全文
![点击此处可从《天然气化学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
CuO-CeO2 catalyst prepared with co-precipitation showed high catalytic performance for the preferential oxidation of CO in excess hydrogen (PROX). Influence of pH values in the preparation of CuO-CeO2 on its catalytic performance was investigated in this work. The CuO-CeO2 catalyst prepared at pH = 13.03 had the smallest particle size (5.4 nm), the largest surface areas (138 m2/g) and the highest activity with CO conversion of 99.6% at 130 ℃. The CuO-CeO2 catalyst was characterized using BET, XRD and TPR techniques. The results showed that when the pH value of the mixed solution containing Cu and Ce species was properly adjusted, both the adsorption layers and diffusion layers of the formed colloidal particles in hydroxide precursor of CuO-CeO2 were modified, resulting in the better catalytic performance for PROX on the final CuO-CeO2 catalyst. 相似文献
11.
This report demonstrates a process to form polysaccharide glassy particles without water–oil or water–air interfaces as well as ionic polymers and its application in formulating sustained‐release dosage forms for structurally delicate proteins. When a co‐solution containing dextran and polyethylene glycol (PEG) was subjected to freeze‐drying, the dextran separated out of the solution to form dispersed phases surrounded by a PEG‐rich continuous phase and was solidified during subsequent lyophilization to fine glassy particles, 1–2 µm in diameter. Water‐soluble proteins can easily be loaded in these glassy particles due to preferential partition and become resistant to organic solvents simply by adding them into the dextran‐PEG co‐solution. After washing away the PEG continuous phase with organic solvents, the protein‐containing glassy particles can be suspended in a hydrophobic polymer solution and formulated into various pharmaceutical dosage forms and medical devices for sustained‐release protein delivery. In the present study, myoglobin, bovine serum albumin (BSA), and β‐galactosidase (β‐gal) were formulated in PLGA mcirospheres and as model proteins using this glassy particulate approach, and subjected to a series of assays for release kinetics, structural integrity, and bioactivity. The experimental results indicated that this system offered well preserved protein integrity and bioactivity as well as significantly improved protein release kinetics. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
12.
The partitioning behavior of silica particles was investigated in the Triton X-100/dextran/water system. It was found that both electrostatic effects and interactions between phase-component species and the solid surface played important roles in determining the distribution of solids. Silica partition was highly pH-dependent, which was interpreted in terms of the pH dependence of the Triton X-100/SiO(2) interaction and the weak acidity of dextran. The presence of sodium dodecyl sulfate (SDS) moved the particles from the top surfactant-rich phase to the interface and the bottom phase, while dodecyltrimethylammonium bromide (DTAB) had the opposite effect. These trends are attributable to the electrostatic interaction between the charged mixed micelles in the top phase and the particles and to the fact that the ionic surfactants modified the adsorption density of the nonionic surfactant on silica. 相似文献
13.
In a previous work [1] we showed that the swelling behavior of carboxylated core-shell particles (PS-PC) can be modified using a specific sample preparation route or favoring the hydrophobic attractive interaction by other way, i.e. controlling the temperature. In that paper, we found that the swelling was promoted in those particles which were initially in a highly swollen state (pH?10) while it was hindered for those particles which were not previously in this trigger pH. In this work, we present a discussion of the salt-induced swelling of the same carboxylated core-shell system (PS-PC) with two tuned swelling behaviors: the former, called A-2, exhibits promoted swelling while in the latter, called B-1, the swelling is greatly suppressed because of a compact conformation of the polymer shell is induced [1]. Good agreement between experimental, numerical and theoretical results at all pH values is obtained for promoted particles (A-2). On the other hand, the salt-induced swelling behaviors shown by hindered particles (B-1) corroborate that polymer restructuring includes assembly among ionic groups which affect their ionization degree and also the electrosteric interaction between particles. Finally, the salt-induced swelling behavior shown by the B-1 system at pH 8.6 resembles the Pincus regime predicted by scaling theory. 相似文献
14.
Amide and ester conjugates of aceclofenac with polyamidoamine (PAMAM-G0) dendrimer zero generation and dextran (40 kDa) polymeric
carrier, respectively, are presented. The prepared conjugates were characterized by UV, TLC, HPLC, IR, and 1H NMR spectroscopy. The average degrees of substitution of amide and ester conjugates were determined and found to be (12.5
± 0.24) % and (7.5 ± 0.25) %, respectively. The in vitro hydrolysis studies showed that dextran ester conjugate hydrolyzed
faster in a phosphate buffer solution of pH 9.0 as compared to PAMAM dendrimer G0 amide conjugate, and followed the first
order kinetics. No amount of the drug was regenerated at pH 1.2 in simulated gastric fluid. The dextran conjugate showed short
half-life as compared to the PAMAM dendrimer conjugate. Anti-inflammatory and analgesic activities of the dendrimer conjugate
were found to be similar to those of the standard drug. Results of chronic ulceroginic activity showed deep ulceration and
high ulcer index for aceclofenac, whereas lower ulcer index was found for the PAMAM dendrimer and dextran (40 kDa) conjugates.
Experimental data suggest that PAMAM dendrimer and dextran (40 kDa) can be used as carriers for the sustained delivery of
aceclofenac along with a remarkable reduction in gastrointestinal toxicity. 相似文献
15.
Marguerite Dols Magali Remaud-Simeon René-Marc Willemot Michel Vignon Pierre F. Monsan 《Applied biochemistry and biotechnology》1997,62(1):47-59
Leuconostoc mesenteroides NRRL B-1299 dextransucrase was fractionated into soluble (SGT) and insoluble (IGT) enzyme preparations differing by their dextran content. In spite of this, they displayed the same Km for sucrose (10 g/L) and the same activation energy (35 kJ/mol). But the presence of cells and insoluble dextran led to the IGT behaving like an immobilized enzyme: stabilization against thermal denaturation and diffusional limitations at low substrate concentrations were observed. On the other hand, the behavior of SGT was influenced by the presence, in the preparation, of soluble dextran that reduced enzyme inhibition by excess substrate. SGT and IGT present very different pH profiles. In the presence of 4 g/L of soluble dextran, IGT was activated and displayed the same susceptibility to pH as SGT. The activation of IGT was highly dependent on the nature of the acceptor added but also on the pH of the reaction medium. IGT and SGT synthesize both soluble and insoluble polymer containing α(l → 2), α(l → 3), and α(l → 6) linkages. A larger amount of insoluble dextran is elaborated by SGT. The polymer structures, examined by13C NMR spectrometry, revealed that they differ mainly by their α(l → 3) linkage content (from 0 to 11%). This linkage seems to be partly responsible for the dextran insolubility and can be completely eliminated by carrying out the synthesis of soluble polymer at pH 7.4 with SGT. 相似文献
16.
Scharnweber T Santos C Franke RP Almeida MM Costa ME 《Molecules (Basel, Switzerland)》2008,13(11):2729-2739
In our previous work we described the preparation and characterization of spray dried hydroxyapatite micro granules loaded with 5-fluorouracil (5-FU). These loaded particles are used as a model drug delivery system (DDS). In this study we examined the in vitro response of two cell lines derived from different tissues to 5-FU loaded granules (LG). Both cell lines, either L929 cells of a mouse fibroblast lineage or cells originating from a rat osteosarcoma (ROS 17/2.8) showed a dose dependent decrease in cell proliferation in response to 5-FU-, either dissolved in the culture medium or loaded onto particles. The response of the two cell lines to loaded and nonloaded particles was different. The effect of LG and of a corresponding concentration of free 5-FU was practically the same for the ROS 17/2.8 cells indicating that ROS 17/2.8 cells were not affected by the carrier material. In contrast, L929 cells showed a slight decrease in cell proliferation also in the presence of granules not loaded with 5-FU. This is thought to be attributed to the inhibition of mitogenesis by phosphocitrates, already demonstrated in fibroblasts. In summary, we found that the loaded 5-FU kept its effectivity after the spray drying process and that the response towards the granules varied with cell type. This is the first step towards a tissue specific DDS. 相似文献
17.
Biodegradable material poly(D, L ‐lactic‐co‐glycolic) acid (PLGA) plays an important role in drug‐sustained release systems. Here, we describe a glycerol modified solid‐in‐oil‐in‐water (m‐S/O/W) emulsion method for PLGA microspheres, in order to encapsulate proteins in PLGA by utilizing dextran glassy particles to protect the proteins from denaturing, unfolding, and aggregation during preparation and new external water phase to prevent the inner dextran glassy particles from leaking into the external water phase. External water phase containing 20, 40, 60, 80% glycerol showed that proteins released faster and more completely with increased glycerol content. According to their varied release profiles, microspheres of different formulations could be used to encapsulate vaccines or for delivering proteins over long‐term. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
18.
Marzieh Vafaee Mostafa M. Amini Ezzatollah Najafi Omid Sadeghi Vahid Amani 《Journal of Sol-Gel Science and Technology》2012,64(2):411-417
Different nanoporous silica materials, MCM-41, MCM-48 and SBA-15, were modified by pyridine and their applications for oral drug delivery system were evaluated. These pyridine functionalized nanoporous silicas were loaded with a water insoluble diorganotin(IV) dichloride complex as an antitumor drug model and its release from them were investigated by changing pH. An efficient pH-responsive carrier system was constructed by coordination of the pyridine group in modified nonoporous materials to tin complex. In vitro, releasing of loaded tin complex was studied in three different kinds of fluids, including a simulated gastric medium and a simulated body fluid. The loading and releasing of the diorganotin(IV) dichloride from various modified nanoporous silicas and also a non-porous silica (SiO2) were investigated, and the results were compared. In addition, the effect of some factors such as pH, time of loading and releasing were investigated through this study. 相似文献
19.
In the current research, a series of dextran-grafted adsorbents were prepared using sulfopropyl and 4-(1H-imidazol-1-yl) aniline as chromatographic ligands for ion-exchange (IEC) and mixed-mode chromatography (MMC) to respectively investigate the influence of dextran layer on adsorption of γ-globulin. Experimental evidences of static adsorption on dextran-grafted IEC adsorbents showed that adsorption capacity of γ-globulin increased with dextran content. It could be attributed to the multilayer adsorption of charged protein in dextran layer and thus further induced a significant electrical potential gradient at the boundary of adsorbed area and its proximity, improving mass transfer in combination with concentration gradient. In contrast to IEC adsorbents, adsorption capacity and effective diffusivity of dextran-grafted MMC adsorbents did not change obviously with dextran grafting. It was considered that hydrophobic ligands immobilized onto dextran-grafted MMC adsorbents were stuck together at pH 8.0, resulting in the collapse of dextran layer. In concert with measured effective porosity for γ-globulin at pH 4.0, it was confirmed that dextran layer in MMC adsorbent was more complicated and influenced significantly by buffer pH. It was also manifested by protein adsorption at different pHs. Thus, it revealed the complexity in intraparticle mass transfer of the protein in dextran-grafted MMC adsorbent. 相似文献
20.
A solution of sodium silicate produced as a waste from the alkali fusion of Egyptian Rosetta zircon mineral was used for preparation
of a silica gel in the pH range 6–7. A silica gel modified with tetraethylenepentamine (TEP) and diethylenetriamine (DET)
functionalities were prepared. The success of immobilization process was confirmed by means of FT-IR, energy dispersive X-ray
spectrometric analysis (EDX) and elemental analysis. The surface properties of the modified silica obtained were investigated
by means of nitrogen surface area. The uptake behaviour of the modified silica towards Th(IV) ions at different experimental
conditions of pH, time, concentration and temperature using batch method was studied. Kinetics and thermodynamics studies
showed an endothermic pseudo-second order adsorption process. Regeneration of the loaded silica was performed using 1 M HNO3. The investigated silicas have successfully been applied for separating of Th(IV) from U(VI) in nitric acid solution obtained
from alkaline leaching of Egyptian monazite sand. 相似文献