Rate and product studies in the solvolyses of N,N-dimethylsulfamoyl and 2-propanesulfonyl chlorides

Contrary to earlier suggestions of an S(N)1 pathway for solvolyses of N,N-dimethylsulfamoyl chloride (1), an extended Grunwald-Winstein equation treatment of the specific rates of solvolysis in 32 solvents shows an appreciable sensitivity towards changes in both solvent nucleophilicity and solvent ionizing power. The actual values are very similar to those obtained in earlier studies of the solvolyses of sulfonyl and phosphoryl chlorides, solvolyses which are believed to proceed by an S(N)2 pathway. The observation of similar selectivities in aqueous-alcohol solvents further supports this assignment. In a recent report, an addition-elimination (association-dissociation) pathway was proposed for solvolyses of 2-propanesulfonyl chloride (2). A severe multicollinearity problem has been removed by the addition of several specific rates of solvolysis in fluoroalcohol-containing solvents. The new analyses using the extended Grunwald-Winstein equation lead to sensitivities similar to those for and the previously studied related compounds, and these solvolyses are also best described as following an S(N)2 pathway.     

Rate and product studies with dimethyl phosphorochloridate and phosphorochloridothionate under solvolytic conditions

The specific rates of solvolysis of dimethyl phosphorochloridate and of dimethyl phosphorochloridothionate are very well correlated using the extended Grunwald-Winstein equation, with incorporation of the NT solvent nucleophilicity scale and the YCl solvent ionizing power scale. The sensitivity parameters (l and m) are similar to each other and also similar to previously recorded values for solvolyses of arenesulfonyl chlorides, which were proposed to follow a concerted displacement mechanism. For solvolyses in aqueous ethanol or aqueous methanol the product selectivities (S) are close to unity. For solvolyses in aqueous 2,2,2-trifluoroethanol, the values are too small to accurately measure, showing a very large preference for product formation involving nucleophilic attack by the water component. It is concluded that the chloride and chloridothionate solvolyses, in common with the solvolyses of arenesulfonyl chlorides, follow a concerted displacement mechanism.     

Intrinsic (gas phase) thermodynamic stability of 2-adamantyl cation. Its bearing on the solvolysis rates of 2-adamantyl derivatives

The standard enthalpy of formation of gaseous 2-adamantyl chloride(2-Ad-Cl) was determined by calorimetric techniques. The standard Gibbs energy change for the chloride anion exchange between 1-adamantyl (1-Ad+) and 2-adamantyl (2-Ad+) cations in the gas phase was obtained by Fourier transform ion cyclotron resonance spectroscopy (FT ICR). Theoretical calculations at the G2(MP2) level were performed on these and other relevant species. This and data from the literature provided three highly consistent independent estimates of the relative stabilities of 2-Ad+ and 1-Ad+. This difference in gas-phase stability was compared to the differential structural effects on the rates of solvolysis of the corresponding chlorides and tosylates, and it was shown that the thermodynamic stability of the secondary cation is the leading factor determining the solvolytic reactivity of the precursors in the absence of solvent effects. Thus, under these conditions, the previously established linear free energy correlation between carbenium ion stability and solvolytic reactivity of bridgehead derivatives applies also to secondary derivatives.     

S(N)2 Mechanism for Alcoholysis, Aminolysis, and Hydrolysis of Acetyl Chloride

First-order solvolysis rate constants are reported for solvolyses of acetyl chloride in methanol and MeOD, and in binary aqueous mixtures with acetone, acetonitrile, ethanol, methanol, and trifluoroethanol at 0 degrees C. Product selectivities (S = [MeCOOR]/[MeCOOH] x [water]/[alcohol]) are reported for solvolyses in ethanol/ and methanol/water at 0 degrees C. Solvolyses of acetyl chloride show a high sensitivity to changes in solvent ionizing power, consistent with C-Cl bond cleavage. As the solvent is varied from pure ethanol (or methanol) to water, S values and rate-rate profiles show no evidence for the change in reaction channel observed for solvolyses of benzoyl and trimethylacetyl chlorides. However, using rate ratios in 40% ethanol/water and 97% trifluoroethanol/water (solvents of similar ionizing power but different nucleophilicities) to compare sensitivities to nucleophilic attack, solvolyses of acetyl chloride are over 20-fold more sensitive to nucleophilic attack than benzoyl chloride. The solvent isotope effect of 1.29 (MeOH/MeOD) for acetyl chloride is similar to that for p-methoxybenzoyl chloride (1.22) and is lower than for benzoyl chloride (1.55). Second-order rate constants for aminolyses of acetyl chloride with m-nitroaniline in methanol at 0 degrees C show that acetyl chloride behaves similarly to p-methoxybenzoyl chloride, whereas benzoyl chloride is 40-fold more sensitive to the added amine. The results indicate mechanistic differences between solvolyses of acetyl and benzoyl chlorides, and an S(N)2 mechanism is proposed for solvolyses and aminolyses by m-nitroaniline of acetyl chloride (i.e. these reactions are probably not carbonyl additions, but a strong sensitivity to nucleophilic attack accounts for their high rates).     

Solvolyses of 2-Deoxy-alpha- and beta-D-Glucopyranosyl 4'-Bromoisoquinolinium Tetrafluoroborates

The solvolyses of 2-deoxy-alpha- and beta-D-glucopyranosyl 4'-bromoisoquinolinium tetrafluoroborates (1 and 2) were monitored in aqueous methanol, ethanol, trifluoroethanol, and binary mixtures of ethanol and trifluoroethanol. The observed rate constants are consistent with the solvolyses of 1 and 2 proceeding via dissociative (D(N) A(N)) transition states. In comparison to the alpha-anomer, solvolysis of the beta-compound gives a greater transition state charge delocalization onto the ring oxygen atom. Analysis of the solvolysis product ratios indicates that the 2-deoxyglucosyl oxacarbenium ion is not solvent-equilibrated in the solvent mixtures studied. In the solvolysis of compound 1, the solvent trifluoroethanol facilitates diffusional separation of the leaving group and, in so doing, promotes the formation of the retained trifluoroethyl glycoside.     

Is the tert-butyl chloride solvolysis the most misunderstood reaction in organic chemistry? Evidence against nucleophilic solvent participation in the tert-butyl chloride transition state and for increased hydrogen bond donation to the 1-adamantyl chloride solvolysis transition state.

Despite theoretical calculations to the contrary, it has been argued that the 1-adamantyl cation is more stable than the tert-butyl cation in media of high dielectric constant. This argument has been utilized to suggest that the higher rate of solvolysis of tert-butyl chloride in aqueous ethanol is evidence for nucleophilic solvent participation in this classic reaction. Further, in "more highly ionizing" solvents, the rate of 1-adamantyl chloride is nearly the same as that of tert-butyl chloride, which is interpreted as a manifestation of the relative stabilities of the cations. However, the evidence cited does not explain the increased sensitivity of the rate of solvolysis of 1-adamantyl chloride over tert-butyl chloride to solvents which are better able to donate hydrogen bonds. The hypothesis developed here is that 1-adamantyl chloride solvolysis is assisted by hydrogen bond donation departing chloride ion to a greater extent than that of tert-butyl chloride solvolysis, most likely due to lessened steric interactions in a developing pyramidal cation. This hypothesis is supported by multiparameter solvent effect factor analyses utilizing the KOMPH2 equation which, in addition, quantifies the important role of ground-state destabilization due to strong solvent-solvent interactions. An important result from the good correlation of free energies of transfer of the tert-butyl chloride solvolysis transition state is that there is no change in mechanism, and, in particular, no nucleophilic participation even in non-hydroxylic basic solvents. The equation is also applied to the case of dimethylsulfonium ion solvolyses where the tert-butyl salt reacts substantially faster than the 1-adamantyl salt in ethanol and the gas phase. The decreased rate of the former in hydrogen bond donating solvents relative to the gas phase is as yet unclear. Solvent N values that were generated to characterize solvent nucleophilicity are shown not to be correlated by measures of solvent basicity but rather by the negative of measures of solvent hydrogen bond donor ability.     

Application of the NT solvent nucleophilicity scale to attack at phosphorus: solvolyses of N,N,N',N'-tetramethyldiamidophosphorochloridate

The specific rates of solvolysis of N,N,N',N'-tetramethyldiamidophosphorochloridate have been measured at 25.0 degrees C in 31 solvents. Analysis with the extended Grunwald-Winstein equation leads to sensitivities toward changes in solvent nucleophilicity (l) of 1.20 +/- 0.07 and toward changes in solvent ionizing power (m) of 0.69 +/- 0.04. The correlation is improved by omission of the four data points for 2,2,2-trifluoroethanol-ethanol mixtures (F-test value from 155 to 320) with very small reductions in both l and m values. Activation parameters are reported for eight of the solvolyses. The l and m values are very similar to those previously reported for solvolyses of several arenesulfonyl chlorides, consistent with a concerted substitution process. This assignment is supported by a large k(Cl)/k(F) ratio for hydrolysis and a corresponding ratio for hydroxide-assisted hydrolysis of 178. The stereochemistry of nucleophilic attack at tetracoordinate phosphorus(V) is discussed.     

Use of the Simple and Extended Grunwald-Winstein Equations in the Correlation of the Rates of Solvolysis of Highly Hindered Tertiary Alkyl Derivatives

The original Grunwald-Winstein equation (1948) involved the development of a scale of solvent ionizing power (Y). Subsequent work has refined this scale and involved the development of scales of solvent nucleophilicity (N) and a term to correct for deviations when aromatic rings are present, governed by the aromatic ring parameter (I). These three scales, and the sensitivities towards each, can be related to specific rates of solvolysis through linear free energy relationships (LFERs).One important area of application of LFERs has been to the solvolyses of tert-alkyl halides. It has been proposed that the solvolysis of tert-butyl chloride involves a nucleophilic component, although other workers have suggested that the effects observed are related to electrophilic not nucleophilic influences. Takeuchi (1997) studied a compound with two of the methyl groups of tert-butyl chloride replaced by neopentyl groups. For this highly-hindered substrate there was no evidence for nucleophilic participation. Liu (1998) and Takeuchi (2001) have reported concerning the solvolyses of additional significantly-hindered tertiary alkyl chlorides. Liu (2009) has presented a parallel study of bromides. Martins (2008) has considered hindered tertiary alkyl halides, mainly with carbon-carbon multiple bonds as substituents. It was proposed that the hI term was of importance, with the sensitivities (h) sometimes positive and sometimes negative. To explain negative values, it was suggested that the I scale might contain a nucleophilicity component. In this review, we bring together, with analysis and commentary, the work of Takeuchi, Liu, Martins and others concerning the solvolyses of tertiary alkyl halides, with emphasis on the relevance of the three scales that have been developed for use in Grunwald-Winstein correlations.     

Additivity rules using similarity models for chemical reactivity: calculation and interpretation of electrofugality and nucleofugality

A recently proposed, multi-parameter correlation: log k (25 degrees C)=s(f) (Ef + Nf), where Ef is electrofugality and Nf is nucleofugality, for the substituent and solvent effects on the rate constants for solvolyses of benzhydryl and substituted benzhydryl substrates, is re-evaluated. A new formula (Ef=log k (RCl/EtOH/25 degrees C) -1.87), where RCl/EtOH refers to ethanolysis of chlorides, reproduces published values of Ef satisfactorily, avoids multi-parameter optimisations and provides additional values of Ef. From the formula for Ef, it is shown that the term (sfxEf) is compatible with the Hammett-Brown (rho+sigma+) equation for substituent effects. However, the previously published values of N(f) do not accurately account for solvent and leaving group effects (e.g. nucleofuge Cl or X), even for benzhydryl solvolyses; alternatively, if the more exact, two-parameter term, (sfxNf) is used, calculated effects are less accurate. A new formula (Nf=6.14 + log k(BX/any solvent/25 degrees C)), where BX refers to solvolysis of the parent benzhydryl as electrofuge, defines improved Nf values for benzhydryl substrates. The new formulae for Ef and Nf are consistent with an assumption that sf=1.00(,) and so improved correlations for benzhydryl substrates can be obtained from the additive formula: log k(RX/any solvent/25 degrees C)=(Ef + Nf). Possible extensions of this approach are also discussed.     

Comprehensive study of the methyl effect on the solvolysis rates of bridgehead derivatives

The effect of a bridgehead methyl group on the hydride ion affinity in the gas phase of bicyclo[1.1.1]pent-1-yl (1+), 1-norbornyl (3+), cubyl (5+), 1-adamantyl (7+), bicyclo[2.2.2]oct-1-yl (9+),and bicyclo[3.1.1]hept-1-yl (11+) cations has been studied using density functional theory and ab initio methods. It is concluded that the methyl group always increases the stability of the substituted cations. The effect of the solvent on the stability of methyl-substituted cations in relation to the unsubstituted cations has been studied using the polarizable continuum model of the self-consistent reaction field theory. In the case of rearranging cations, the nucleophilic assistance of the solvent is determined by means of the interaction energy of the corresponding water complexes. It is concluded that the solvent causes the relative stabilization of the parent cations. As a consequence, most of the methyl-substituted bridgehead derivatives show a lower solvolysis rate than the corresponding unsubstituted compounds. A nonqualitative explanation of the methyl effect on the relative stability of bridgehead cations in both gas phase and solution is given for the first time. The ratios of solvolysis products in the case of rearranging bridgehead cations have also been computed from the relative stability of the intermediate water complexes.     

Correlation of the Rates of Solvolysis of the Benzhydryldimethylsulfonium Ion. Application of the Aromatic Ring Parameter(1)

Values for the specific rates of solvolysis of the benzhydryldimethylsulfonium ion in 34 solvents have been analyzed using various forms of the extended Grunwald-Winstein equation. The specific rates are insensitive toward changes in solvent nucleophilicity (N(T)) values, and they correlate best against a combination of Y(+) values (based on the solvolyses of the 1-adamantyldimethylsulfonium ion) and aromatic ring parameter (I) values. Common-molecule return is observed, being especially powerful in solvents rich in fluoro alcohol; the logarithm of the associated mass law constant correlates inversely with the solvent N(T) values. The product selectivities in ethanol-water mixtures are also consistent with an S(N)1 mechanism for the solvolyses.     

Influence of carbocation stability in the gas phase on solvolytic reactivity: beyond bridgehead derivatives

The intrinsic gas-phase stability of bicyclic secondary carbocations has been determined by Dissociative Proton Attachment of chlorides and alcohols, respectively. From these data, Gibbs free energies for hydride transfer relative to 1-adamantyl (Delta(r)G degrees (8,exp)) are derived after application of appropriate leaving group corrections, and good agreement with theoretical values, (Delta(r)G degrees (8,comp)), calculated at the G2(MP2) or MP2/6-311G(d,p) level, is reached (Table 1). The relative rate constants for solvolysis (log(k/k(0))) of the bicyclic secondary derivatives correlate with the stabilities of the respective carbocations in the same manner as tertiary bridgehead derivatives, but simple monoderivatives and acyclic derivatives solvolyze faster than predicted on the grounds of the ion stabilities. The corresponding stabilities of cyclopropyl- and benzyl-substituted carbocations have been obtained by a combination of experimental and computational data available in the literature with computational methods. Correlation of the rate constants for solvolysis vs ion stabilities for these compounds reveals a trend similar to that observed for bridgehead derivatives, but with much more scatter, which is attributed to nucleophilic solvent participation and/or nucleophilic solvation.     

An Efficient Synthesis of Sulfonylhydrazides and Sulfonylsemicarbazides by Utilizing Alumina as a Catalyst

Sulfonyl hydrazides and sulfonyl semicarbazides are readily prepared by the reacting of hydrazine derivatives with sulfonyl chlorides in the presence of basic alumina under solvent‐free conditions. Reaction of a sulfonyl chloride with t‐butylcarbazate, followed by hydrolysis provides the corresponding sulfonyl hydrazides in higher yield and shorter time than previously reported.     

Organic reactivity in liquid ammonia

Liquid ammonia is a useful solvent for many organic reactions including aliphatic and aromatic nucleophilic substitution and metal-ion catalysed reactions. The acidity of acids is modified in liquid ammonia giving rise to differences from conventional solvents. The ionisation constants of phenols and carbon acids are the product of those for ion-pair formation and dissociation to the free ions. There is a linear relationship between the pK(a) of phenols and carbon acids in liquid ammonia and those in water of slope 1.68 and 0.7, respectively. Aminium ions exist in their unprotonated free base form in liquid ammonia. The rates of solvolysis and aminolysis by neutral amines of substituted benzyl chlorides in liquid ammonia show little or no dependence upon ring substituents, in stark contrast with the hydrolysis rates of substituted benzyl halides in water which vary 10(7) fold. However, the rates of the reaction of phenoxide ions and amine anions with 4-substituted benzyl chlorides gives a Hammett ρ = 1.1 and 0.93, respectively. The second order rate constants for the substitution of benzyl chlorides by neutral and anionic amines show a single Br?nsted β(nuc) = 0.21 whereas those for substituted phenoxide ions generate a Br?nsted β(nuc) = 0.40. The rates of aromatic nucleophilic substitution reactions in liquid ammonia are much faster than those in protic solvents indicating that liquid ammonia behaves like a typical dipolar aprotic solvent in its solvent effects on organic reactions. Nitrofluorobenzenes (NFB) readily undergo solvolysis in liquid ammonia but oxygen nucleophiles, such as alkoxide and phenoxide ions, displace the fluorine of 4-NFB in liquid ammonia to give the corresponding substitution product with little or no competing solvolysis product. The Br?nsted β(nuc) for the reaction of 4-NFB with para-substituted phenoxides is 0.91, indicative that the decomposition of the Meisenheimer σ-intermediate is rate limiting. The aminolysis of 4-NFB occurs without general base catalysis by the amine and the second order rate constants generate a Br?nsted β(nuc) of 0.36, which is also interpreted in terms of rate limiting breakdown of the Meisenheimer σ-intermediate.     

Thermal and photochemical solvolysis of (E)- and (Z)-2-phenyl-1-propenyl(phenyl)iodonium tetrafluoroborate: benzenium and primary vinylic cation intermediates

The thermal and photochemical solvolysis of the two stereoisomeric 2-phenyl-1-propenyl(phenyl)iodonium tetrafluoroborates has been investigated in alcoholic solvents of varying nucleophilicity. The product profiles and rates of product formation in the thermal reaction are all compatible with a mechanism involving cleavage of the vinylic C-I bond assisted by the group in the trans position (methyl or phenyl), always leading to rearranged products. Depending on the nucleophilicity of the solvent, the primarily formed cations may or may not further rearrange to more stable isomers. The less reactive Z compound also yields some unrearranged vinyl ether product in the more nucleophilic solvents via an in-plane S(N)2 mechanism. The mechanism of the photolysis involves direct, unassisted cleavage of the vinylic, and aromatic, C-I bond in an S(N)1 mechanism. This produces a primary vinyl cation, which is partially trapped prior to rearrangement in methanol. The unrearranged vinyl ethers are mainly formed with retention of configuration via a lambda3-iodonium/solvent complex in an S(N)i mechanism. Thermal and photochemical solvolyses of iodonium salts are complementary techniques for the generation of different cation intermediates from the same substrate.     

Mechanisms of solvolyses of acid chlorides and chloroformates. Chloroacetyl and phenylacetyl chloride as similarity models

[reaction: see text] Rate constants and product selectivities (S = ([ester product]/[acid product]) x ([water]/[alcohol solvent]) are reported for solvolyses of chloroacetyl chloride (3) at -10 degrees C and phenylacetyl chloride (4) at 0 degrees C in ethanol/ and methanol/water mixtures. Additional kinetic data are reported for solvolyses in acetone/water, 2,2,2-trifluoroethanol(TFE)/water, and TFE/ethanol mixtures. Selectivities and solvent effects for 3, including the kinetic solvent isotope effect (KSIE) of 2.18 for methanol, are similar to those for solvolyses of p-nitrobenzoyl chloride (1, Z = NO(2)); rate constants in acetone/water are consistent with a third-order mechanism, and rates and products in ethanol/ and methanol/water mixtures can be explained quantitatively by competing third-order mechanisms in which one molecule of solvent (alcohol or water) acts as a nucleophile and another acts as a general base (an addition/elimination reaction channel). Selectivities increase for 3 as water is added to alcohol. Solvent effects on rate constants for solvolyses of 3 are very similar to those of methyl chloroformate, but acetyl chloride shows a lower KSIE, and a higher sensitivity to solvent-ionizing power, explained by a change to an S(N)2/S(N)1 (ionization) reaction channel. Solvolyses of 4 undergo a change from the addition/elimination channel in ethanol to the ionization channel in aqueous ethanol (<80% v/v alcohol). The reasons for change in reaction channels are discussed in terms of the gas-phase stabilities of acylium ions, calculated using Gaussian 03 (HF/6-31G(d), B3LYP/6-31G(d), and B3LYP/6-311G(d,p) MO theory).     

The role of water release from the cyclodextrin cavity in the complexation of benzoyl chlorides by dimethyl-β-cyclodextrin

The influence of temperature on the solvolysis of substituted benzoyl chlorides in the presence of dimethyl-β-cyclodextrin (DM-β-CD) was studied. Based on the influence of the DM-β-CD concentration on chemical reactivity in this process, the cyclodextrin has a catalytic effect on the solvolysis of 4-nitrobenzoyl chloride (4-NO₂) but an inhibitory effect on that of 4-methoxy-(4-MeO), 3-chloro-(3-Cl) and 3-trifluoromethyl-(3-CF₃) benzoyl chlorides. These disparate effects are related to a difference in reaction mechanism; thus, DM-β-CD catalyses associative solvolysis and inhibits dissociative solvolysis. Examining the influence of temperature on the solvolytic process allowed the stoichiometry of the host-guest complexes formed to be established. The formation constants for the complexes of meta-substituted benzoyl chlorides increased with increasing temperature. On the other hand, the equilibrium formation constants for the 1:1 host-guest complexes of para-substituted benzoyl chlorides exhibited the opposite trend. The equilibrium formation constant for 2:1 host-guest complexes for the para-substituted benzoyl chlorides increased with increasing temperature. These differences are ascribed to the release of water from the DM-β-CD cavity during the formation of the host-guest complex.     

Solvent and stereoelectronic effects on the solvolysis rates of oxaspirocyclopropanated 1-norbornyl triflates and related bridgehead derivatives

The study of the stereochemical outcome of the solvolysis of oxaspirocyclopropanated 1-norbornyl triflates is highly interesting since these reactions do not lead to the usual retention or fragmentation products but only synthetically interesting rearranged products are enantiospecifically formed. There is no correlation between the experimental solvolysis rates (ln k) and the B3LYP/6-31G(d)-computed ionization energies (Delta E) of the corresponding bridgehead hydrocarbons in gas phase. However, this work demonstrates the existence of a fair linear correlation between the experimental reaction rates and the PCM//B3LYP/6-31G(d)-computed free ionization energies in solution (Delta G). This theoretically relevant result reveals that the reason for the lack of linearity in gas phase is not the rearrangement of the intermediate carbocations but unspecific solvent effects on the solvolysis rates, accounted for by the PCM model.     

Liquid ammonia as a dipolar aprotic solvent for aliphatic nucleophilic substitution reactions

The rate constants for the reactions of a variety of nucleophiles reacting with substituted benzyl chlorides in liquid ammonia (LNH(3)) have been determined. To fully interpret the associated linear free-energy relationships, the ionization constants of phenols ions in liquid ammonia were obtained using UV spectra. These equilibrium constants are the product of those for ion-pair formation and dissociation to the free ions, which can be separated by evaluating the effect of added ammonium ions. There is a linear relationship between the pK(a) of phenols in liquid ammonia and those in water of slope 1.68. Aminium ions exist in their unprotonated free base form in liquid ammonia and their ionization constants could not be determined by NMR. The rates of solvolysis of substituted benzyl chlorides in liquid ammonia at 25 °C show a Hammett ρ of zero, having little or no dependence upon ring substituents, which is in stark contrast with the hydrolysis rates of substituted benzyl halides in water, which vary 10(7) fold. The rate of substitution of benzyl chloride by substituted phenoxide ions is first order in the concentration of the nucleophile indicative of a S(N)2 process, and the dependence of the rate constants on the pK(a) of the phenol in liquid ammonia generates a Br?nsted β(nuc) = 0.40. Contrary to the solvolysis reaction, the reaction of phenoxide ion with 4-substituted benzyl chlorides gives a Hammett ρ = 1.1, excluding the 4-methoxy derivative, which shows the normal positive deviation. The second order rate constants for the substitution of benzyl chlorides by neutral and anionic amines show a single Br?nsted β(nuc) = 0.21 (based on the aqueous pK(a) of amine), but their dependence on the substituent in substituted benzyl chlorides varies with a Hammett ρ of 0 for neutral amines, similar to that seen for solvolysis, whereas that for amine anions is 0.93, similar to that seen for phenoxide ion.     

Highly selective catalytic Friedel-Crafts acylation and sulfonylation of activated aromatic compounds using indium metal

The Friedel-Crafts acylation of activated benzenes with various aromatic and aliphatic acid chlorides was studied in the presence of indium metal. The reaction was accomplished in high isolated yields under solvent or solvent-less conditions. The method is also applicable for preparing diaryl sulfones from aromatic compounds and aryl sulfonyl chlorides.