Ionic-liquid-promoted decaborane dehydrogenative alkyne-insertion reactions: a new route to o-carboranes

Unlike in conventional organic solvents, where Lewis base catalysts are required, decaborane dehydrogenative alkyne-insertion reactions proceed rapidly in biphasic ionic-liquid/toluene mixtures with a wide variety of terminal and internal alkynes, thus providing efficient, one-step routes to functional o-carborane 1-R-1,2-C2B10H11 and 1-R-2-R'-1,2-C2B10H10 derivatives, including R = C6H5- (1), C6H13- (2), HC[triple bond]C-(CH2)5- (3), (1-C2B10H11)-(CH2)5- (4), CH3CH2C(O)OCH2- (5), (C2H5)2NCH2- (6), NC-(CH2)3- (7), 3-HC[triple bond]C-C6H4- (8), (1-C2B10H11)-1,3-C6H4- (9), HC[triple bond]C-CH2-O-CH2- (10); R,R' = C2H5- (11); R = HOCH2-, R' = CH3- (12); R = BrCH2-; R' = CH3- (13); R = H2C=C(CH3)-, R' = C2H5- (14). The best results were obtained from reactions with only catalytic amounts of bmimCl (1-butyl-3-methylimidazolium chloride), where in many cases reaction times of less than 20 min were required. The experimental data for these reactions, the results observed for the reactions of B10H13(-) salts with alkynes, and the computational studies reported in the third paper in this series all support a reaction sequence involving (1) the initial ionic liquid promoted formation of the B10H13(-) anion, (2) addition of B10H13(-) to the alkyne to form an arachno-R,R'-C2B10H13(-) anion, and (3) protonation of arachno-R,R'-C2B10H13(-) to form the final neutral 1-R-2-R'-1,2-C2B10H10 product with loss of hydrogen.     

Selective cage boron/carbon extrusion reaction of 13-vertex carborane μ-1,2-(CH2)3-1,2-C2B11H11: formation of nido-CB10, closo-CB10, and closo-C2B10 species

The nature of nucleophiles greatly influences the reactivity patterns of 13-vertex carboranes. μ-1,2-(CH(2))(3)-1,2-C(2)B(11)H(11) reacts with Et(3)N/MeOH, pyridine or bipyridine to give cage-boron and -carbon extrusion products nido-CB(10) or closo-CB(10), or a cage-boron extrusion compound closo-C(2)B(10) while the cage-carbon extrusion species closo-CB(11) monoanions are produced by treatment with MeOH or Ph(3)P.     

Synthesis of quadruped-shaped polyfunctionalized o-carborane synthons

o-Carborane derivatives with precisely defined patterns of substitution have been prepared from 8,9,10,12-I(4)-1,2-closo-C(2)B(10)H(8) by replacing the iodine atoms, bonded to four adjacent boron vertices in the cluster, with allyl, and subsequently 3-hydroxypropyl groups. The resulting structures, comprising four pendant arms and two reactive vertices located on opposite sides of a central o-carborane core, can be envisaged as versatile precursors for dendritic growth.     

Control of stability through overlap matching: closo-carborynes and closo-silaborynes

The matching of ring and cap orbitals for overlap is used to arrive at the best carborynes among the many possibilities. Accordingly, 1,2-carboranes, 1,2-silaboranes (C2BnHn+2, and Si2BnHn+2, n = 4, 5, 8, and 10), and their dehydrogeno derivatives were studied with use of the Density Functional Theory (B3LYP/6-311+G*). The dehydrogenation of 2,3-C2B5H7 (6a) to 2,3-C2B5H5 (13a) is estimated to be even less endothermic than those of benzene and 1,2- C2B10H12 (1a) to benzyne and 1,2-C2B10H10 (8a) by more than 21 kcal/mol. This is due to the extra stabilization gained through better overlap of the C2B3H3 ring with the 2 BH caps. The relatively larger size of the Si atom leads to overlap requirements in silaboranes that are different from those in carboranes. The lower Si-Si single bond energy and the preference of Si for lower coordination result in unusual structures in dehydrogenosilaboranes. One of the Si atoms moves away from the surface in Si2B10H10 (15), Si2B8H8 (16, 17, and 18), and 1,2-Si2B5H5 (19). One Si atom forms a bridge to a trigonal surface in 2,3-Si2B5H5 (20) and 1,2-Si2B4H4 (21). Estimates of three-dimensional aromaticity with NICS calculations show that the exohedral double bond does not influence three-dimensional aromaticity.     

Synthesis of boron-iodinated o-carborane derivatives. Water stability of the periodinated monoprotic salt

Boron periodination of o-carborane has been achieved by taking account of the fact that B atoms in the cluster are of two types, i.e., those adjacent to both C atoms and the remainder. The high number of nonequivalent leaving groups opens the possibility through B-C coupling to materials with novel possibilities and to self-assembling due to the enhanced polarizability of the C-H bond. Periodination has accentuated the acidity of the carborane, and monoprotic salts are stable in water.     

Synthesis, reactivity and complexation studies of N,S exo-heterodisubstituted o-carborane ligands. Carborane as a platform to produce the uncommon bidentate chelating (pyridine)N-C-C-C-s(H) motif

The synthesis of N,S-heterodisubstituted 1-(2'-pyridyl)-2-SR-1,2-closo-C2B10H10 compounds (R = Et, 2; R = (i)Pr, 3) has been accomplished starting from 1-(2'-pyridyl)-l,2-closo-C2B10H11 (1), and their partial deboronation reaction leading to the structurally chiral [7-(2'-pyridyl)-8-SR-7,8-nido-C2B9H10]-derivatives (R = Et, [4]-; R = (i)Pr, [5]-) has been studied. Capillary electrophoresis combined with the chiral selector alpha-cyclodextrin has permitted the separation of the electrophoretically pure racemic [7-(2'-pyridyl)-8-SR-7,8-nido-C2B9H11]- ions into two peaks each one corresponding to the interaction of one enantiomer with the alpha-cyclodextrin. The N,S-heterodisubstituted o-carborane containing a mercapto group, 1-(2'-pyridyl)-2-SH-1,2-closo-C2B10H10, 1, is one of the two examples of a rigid bidentate chelating (pyridine)N-C-C-C-S(H) motif having been structurally fully characterized. To study the potential of such a binding site, 1 has been tested as a ligand with metal ions requiring different coordination numbers, two (Au(+)) and four (Pd2+ and Rh+). The crystal structures of the Pd(II) and Au(I) complexes are reported. For the Pd(II) complex, 1 acts as a bidentate ligand whereas for Au(I), 1 acts as a monodentate ligand through the thiolate.     

硼中子捕获疗法中使用的1,2-C2B10H12异腈衍生物的结构和电子特性

利用密度泛函方法在B3LYP/6-31G(d)水平上对1,2-C2B10H12的两种异腈类衍生物的结构特性进行了研究. 结果表明, 1,2-C2B10H11NC的活性较强; 1,2-C2B10H11NC和1,2-C2B10H11CH2NC可以通过结构中的C4原子与过渡金属原子成键而形成碳硼烷异腈金属配合物. 1,2-C2B10H11NC和1,2-C2B10H11CH2NC的分子极性均比1,2-C2B10H12的弱, 这不利于它们在硼中子捕获疗法中的应用.     

半夹芯16电子化合物CpCo(S_2C_2B_(10)H_(10))与乙炔基二茂铁在甲醇中的反应性

半夹芯16电子化合物CpCo(S2C2B10H10)(1)(Cp:cyclopentadienyl)与过量乙炔基二茂铁(FcC≡CH)(Fc:ferrocenyl)在甲醇中反应,分离得到了化合物(CHCFc)(CH=CFc)(S2C2B9H10)(8)和2个乙炔基二茂铁环三聚产物1,2,4-三二茂铁基苯和1,3,5-三二茂铁基苯。在8中,2个乙炔基二茂铁分子以"头对头"方式聚合连接到CpCo(S2C2B10H10)分子中的2个S原子上,导致CpCo结构单元的丢失。碳硼烷笼体B(3)位上的BH键发生活化,该B原子与1个乙炔基二茂铁分子的乙炔基末端C原子连接生成C-B键;同时,B(6)位的BH碎片在甲醇作用下失去,从而closo-C2B10闭式结构转变成nido-C2B9巢式结构。化合物8用单晶X-射线衍射分析方法进行了表征。     

Synthetic and structural studies on C-ethynyl- and C-bromo-carboranes

A high-yield preparation of the C-monoethynyl para-carborane, 1-Me(3)SiC[triple bond]C-1,12-C2B10H11, from C-monocopper para-carborane and 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe(3) is reported. The low-yield preparation of 1,12-(Me3SiC[triple bond]C)2-1,12-C2B10H10 from the C,C'-dicopper para-carborane derivative with 1-bromo-2-(trimethylsilyl)ethyne, BrC[triple bond]CSiMe3, has been re-investigated and other products were identified including the C-monoethynyl-carborane 1-Me3SiC[triple bond]C-1,12-C2B10H11 and two-cage assemblies generated from cage-cage couplings. The contrast in the yields of the monoethynyl and diethynyl products is due to the highly unfavourable coupling process between 1-RC[triple bond]C-12-Cu-1,12-C2B10H10 and the bromoalkyne. The ethynyl group at the cage carbon C(1) strongly influences the chemical reactivity of the cage carbon at C(12)-the first example of the "antipodal effect" affecting the syntheses of para-carborane derivatives. New two-step preparations of 1-ethynyl- and 1,12-bis(ethynyl)-para-carboranes have been developed using a more readily prepared bromoethyne, 1-bromo-3-methyl-1-butyn-3-ol, BrC[triple bond]CCMe2OH. The molecular structures of the two C-monoethynyl-carboranes, 1-RC[triple bond]C-1,12-C2B10H11 (R = H and Me3Si), were experimentally determined using gas-phase electron diffraction (GED). For R = H (R(G) = 0.053) a model with C(5v) symmetry refined to give a C[triple bond]C bond distance of 1.233(5) A. For R = Me3Si (R(G) = 0.048) a model with C(s) symmetry refined to give a C[triple bond]C bond distance of 1.227(5) A. Molecular structures of 1,12-Br2-1,12-C2B10H10, 1-HC[triple bond]C-12-Br-1,12-C2B10H10 and 1,12-(Me(3)SiC[triple bond]C)2-1,12-C2B10H10 were determined by X-ray crystallography. Substituents at the cage carbon atoms on the C2B10 cage skeleton in 1-X-12-Y-1,12-C2B10H10 derivatives invariably lengthen the cage C-B bonds. However, the subtle substituent effects on the tropical B-B bond lengths in these compounds are more complex. The molecular structures of the ethynyl-ortho-carborane, 1-HC[triple bond]C-1,2-C2B10H11 and the ethene, trans-Me3SiBrC=CSiMe3Br are also reported.     

Synthesis, reactivity and structural studies of carboranyl thioethers and disulfides

The equimolar reaction of 1-SH-2-R-1,2-closo-C2B10H10(R=Me, H, Ph) with KOH in ethanol produces the thiolate species [1-S-2-R-1,2-closo-C2B10H10]-. These react with iodine to give the disulfide bridged dicluster (1-S-2-R-1,2-closo-C2B10H10)2(R=H, Me, Ph) compounds as analytically pure, white and air-stable solids in high yield. Synthesis of monothioether bridged species is synthetically more difficult. In fact three procedures have been tested to obtain the thioether bridged dicluster compounds (2-R-1,2-closo-C2B10H10)2S (R=Me, H, Ph) but only (2-Me-1,2-closo-C2B10H10)2S was successfully synthesized and characterized. Attempts to produce mixed compounds (1-R-1,2-closo-C2B10H10)S(1-R'-1,2-closo-C2B10H10), R not=R', were unsuccessful. Deboronation reaction of this dicarboranylthioether lead, depending on the reaction conditions, to monoanionic [(2-Me-1,2-closo-C2B10H10)S(8-Me-7,8-nido-C2B9H10)]- or dianionic [(8-Me-7,8-nido-C2B9H10)2S]2- sulfur bridge anions. Deboronation of carboranyl disulfides gave the corresponding dianionic [(7-S-8-R-7,8-nido-C2B9H10)2]2-(R=H, Me, Ph) species. This reaction was very dependent, however, on the reaction conditions. With slight variation of the reaction conditions, splitting of the S-S bond leading to the thiolate species with retention of the closo cluster was also found. Carboranyl disulfides (1-S-2-R-1,2-closo-C2B10H10)2(R=H, Me, Ph) do not lead to thiosulfinates R-S(O)-S-R' by oxidation with H2O2 or I2 as organic disulfides do. This behaviour is attributed to the presence of the sulfur atom directly bonded to the carbon cluster that produces electronic transfer from the filled orbitals on the sulfur atom into the cage LUMO (largely located on the cage Cc-Cc bond). This causes a depletion of electron density on the sulfur, thence impairing sulfur oxidation, and facilitating S-S breaking. Crystal structures of monothioethers (2-Me-1,2-closo-C2B10H10)2S, [NMe4][(2-Me-1,2-closo-C2B10H10)S(8-Me-7,8-nido-C2B9H10)](the first example reported in the literature of a two cluster compound incorporating the closo C2B10 and the nido[C2B9]- moieties linked by a one member spacer) and disulfides (1-S-1,2-closo-C2B10H11)2, (1-S-2-Me-1,2-closo-C2B10H10)2, (1-S-2-Ph-1,2-closo-C2B10H10)2 are reported which support the behaviour of these species.     

Quenched gas-phase reactions of tetraborane(10), B4H10, with substituted alkynes: new nido-dicarbapentaboranes and arachno-monocarbapentaboranes

New alkyl derivatives of the nido-dicarbapentaborane, 1,2-C(2)B(3)H(7), and arachno-carbapentaborane, 1-CB(4)H(10), have been identified as the main volatile carbaborane products in quenched gas-phase reactions of tetraborane(10), B(4)H(10), with alkyl-substituted ethynes RC[triple bond]CR' (R = Me, Et, (n)Pr or (t)Bu, R' = H; R = Me or Et, R' = Me). The gaseous mixtures were heated at 70 degrees C, and monitored by gas-phase mass spectrometry. Each reaction was quenched when the ethyne was used up. The quenched gas-phase reaction of B(4)H(10) and Me(3)SiC[triple bond]CH gave a single volatile carbaborane product, 1-Me(3)Si-1,2-C(2)B(3)H(6).     

Uncommon coordination behaviour of P(S) and P(Se) units when bonded to carboranyl clusters: experimental and computational studies on the oxidation of carboranyl phosphine ligands

Oxidation of closo-carboranyl diphosphines 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr) and closo-carboranyl monophosphines 1-PR(2)-2-R'-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr, Cy; R'=Me, Ph) with hydrogen peroxide, sulfur and elemental black selenium evidences the unique capacity of the closo-carborane cluster to produce uncommon or unprecedented P/P(E) (E=S, Se) and P=O/P=S chelating ligands. When H(2)O(2) reacts with 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr), they are oxidized to 1,2-(OPR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr). However, when S and Se are used, different reactivity is found for 1,2-(PPh(2))(2)-1,2-closo-C(2)B(10)H(10) and 1,2-(PiPr(2))(2)-1,2-closo-C(2)B(10)H(10). The reaction with sulfur produces mono- and dioxidation products for R=Ph, whereas Se produces the mono-oxidation product only. For R=iPr, only monooxidation takes place with S, and the second C(c)-PiPr(2) bond breaks to yield 1-SPiPr(2)-1,2-closo-C(2)B(10)H(11). When Se is used, only 1-SePiPr(2)-1,2-closo-C(2)B(10)H(11) is formed. The potential of the mono-chalcogenide carboranyl diphosphines 1-EPPh(2)-2-PPh(2)-1,2-closo-C(2)B(10)H(10) (E=S, 9; Se, 15) to behave as unsymmetric chelating bidentate ligands was studied for different metal complexes, different solvents and in the solid state. Dechalcogenation takes place in each case. Computational studies provided information on the P=E (E=S, Se) bonds. Steric effects block the bonding ability of the P=E group due to interactions between the chalcogen and the neighbouring hydrogen atoms (three from the phenyl rings and one from the carborane cluster). The electronic effects originate from the strongly electron-withdrawing character of the closo carborane cluster, which polarizes the P=E (E=S, Se) bond towards the phosphorus atom. As a consequence, the E atom is the electron-poor site and the P atom the electron-rich site in the P=E bond.     

Carboranethiol-modified gold surfaces. A study and comparison of modified cluster and flat surfaces

Four different carboranethiol derivatives were used to modify the surfaces of gold nanoparticles and flat gold films. The novel materials engendered from these modifications are extraordinarily stable species with surfaces that support self-assembled monolayers of 1-(HS)-1,2-C2B10H11, 1,2-(HS)2-1,2-C2B10H10, 1,12-(HS)2-1,12-C2B10H10, and 9,12-(HS)2-1,2-C2B10H10, respectively. Surprisingly, characterization of these materials revealed that a number of molecules of the carboranethiol derivatives are incorporated inside the nanoparticles. This structural feature was studied using a number of techniques, including X-ray photoelectron spectroscopy (XPS), UV-vis, and IR spectroscopies. Thermal desorption experiments show that carborane molecules detach and leave the nanoparticle surface mostly as 1,2-C2B10H10 isotopic clusters, leaving sulfur atoms bound to the gold surface. The surfaces of both the gold nanoparticles and the flat gold films are densely packed with carboranethiolate units. One carborane cluster molecule occupies an area of six to seven surface gold atoms of the nanoparticle and eight surface gold atoms of the flat film. XPS data showed that molecules of 1,12-(HS)2-1,12-C2B10H10 bind to the flat gold surface with only half of the thiol groups due to the steric demands of the icosahedral carborane skeleton. Electrochemical measurements indicate complete coverage of the modified gold surfaces with the carboranethiol molecules.     

Palladium-Catalyzed Coupling of Ethynylated p-Carborane Derivatives: Synthesis and Structural Characterization of Modular Ethynylated p-Carborane Molecules

Methodology leading to a new class of rodlike p-carborane derivatives is described, involving the palladium-catalyzed coupling of B-iodinated p-carboranes with terminal alkynes. The products of these reactions contain an alkyne substituent at a boron vertex of the p-carborane cage. Reaction of closo-2-I-1,12-C(2)B(10)H(11) (1) with closo-2-(C&tbd1;CH)-1,12-C(2)B(10)H(11) (3) in the presence of pyrrolidine and catalytic quantities of bis(triphenylphosphine)palladium dichloride and cupric iodide yields 1,2-(closo-1',12'-C(2)B(10)H(11)-2'-yl)(2) acetylene (4). Oxidative coupling of 3 in the presence of cupric chloride in piperidine affords 1,4-(closo-1',12'-C(2)B(10)H(11)-2'-yl)(2)-1,3-butadiyne (5). Reaction of 2 molar equiv. of closo-2,9-I(2)-1,12-C(2)B(10)H(10) (6) withcloso-2,9-(C&tbd1;CH)(2)-1,12-C(2)B(10)H(10) (7) in the presence of pyrrolidine and catalytic quantities of bis(triphenylphosphine)palladium dichloride and cupric iodide yields closo-2,9-(closo-2'-I-9'-C&tbd1;C-1',12'-C(2)B(10)H(10))(2)-1,12-C(2)B(10)H(10) (8), a rigid, iodine-terminated carborod trimer in which the p-carborane cages are linked at the 2 and 9 B-vertices by alkyne (C&tbd1;C) bridges. The molecular structures of 5 and the previously described closo-2,9-(C&tbd1;CSiMe(3))(2)-1,12-C(2)B(10)H(10) (9) have been determined by X-ray crystallography. Crystallographic data are as follows: for 5, monoclinic, space group P2/a, a = 12.352(6) ?, b = 14.169 (6) ?, c = 12.384(5) ?, beta = 109.69(2) degrees, V = 2041 ?(3), Z = 4, R = 0.098, R(w)( )()= 0.135; for 9, monoclinic, space group C2/m, a = 22.111(4) ?, b = 7.565(2) ?, c = 6.943(2) ?, beta = 107.871(8) degrees, V = 1105 ?(3), Z = 2, R = 0.059, R(w)( )()= 0.090.     

Self-assembly of mercaptane-metallacarborane complexes by an unconventional cooperative effect: a C-H...S-H...H-B hydrogen/dihydrogen bond interaction

The existence of a dihydrogen bond (S-H...H-B) and its combination with a C-H...S hydrogen bond in an unusual cooperative effect are demonstrated from a combination of experimental and theoretical methods. This cooperative effect seems to be responsible for self-assembly of mercaptane-metallacarborane complexes such as closo-[3-Ru(eta6-C6H6)-8-HS-1,2-C2B9H10] (1) and closo-[3-Co(eta5-C5H5)-8-HS-1,2-C2B9H10] (3), which present identical supramolecular two-dimensional polymeric networks. The findings, besides documenting structurally the first S-H...(H-B)2 dihydrogen bond and the unconventional cooperative ability of a boron-attached SH group, prove that substituted carboranes have the potential to serve as building blocks for assembling complex structures.     

Microwave spectra and structures of 1,2-(ortho)- and 1,7-(meta)-carborane, C2B10H12

The microwave spectra of 1,2- and 1,7-dicarba-closo-dodecaborane(12), C(2)B(10)H(12) (ortho- and meta-carborane), have been recorded for the first time at room temperature in the 32-88 and 24-80 GHz spectral ranges, respectively. The spectra of the parent species (1,2-C(2)(11)B(10)H(12) and 1,7-C(2)(11)B(10)H(12)) have been assigned, together with those of four monosubstituted ((10)B) 1,2-C(2)(10)B(11)B(9)H(12) and 1,7-C(2)(10)B(11)B(9)H(12) isotopologues. The microwave spectra confirm that the structures of each of these two molecules are slightly distorted icosahedrons of C(2v) symmetry. A previous determination of the gaseous structures of these two carboranes by the gas electron-diffraction method was based on several assumptions about the B-B bond length differences. All B-B bond lengths have now been redetermined using the substitution (r(s)) method, which is independent of such restraints. Although several of the r(s) and electron-diffraction bond lengths are in good agreement, there are also differences of up to 0.026 ?. Quantum chemical calculations at the B3LYP/6-311++G(3df,3pd) level of theory have also been performed.     

Ionic-liquid-promoted decaborane olefin-hydroboration: a new efficient route to 6-R-B10H13 derivatives

Unlike in conventional organic solvents where transition metal catalysts are required, decaborane olefin-hydroboration reactions have been found to proceed in biphasic ionic-liquid/toluene mixtures with a wide variety of olefins, including alkyl, alkenyl, halo, phenyl, ether, ester, pinacolborane, ketone, and alcohol-substituted olefins, and these reactions now provide simple high-yield routes to 6-R-B10H13 derivatives. Best results were observed for reactions with bmimX (1-butyl-3-methylimidazolium, X = Cl(-) or BF4(-)) and bmpyX (1-butyl-4-methylpyridinium, X = Cl(-) or BF4(-)). Both the experimental data for these reactions and separate studies of the reactions of B10H13(-) salts with olefins indicate a reaction sequence involving (1) the ionic-liquid-promoted formation of the B10H13(-) anion as the essential initial step, (2) the addition of the B10H13(-) anion to the olefin to form a 6-R-B10H12(-) anion, and finally, (3) protonation of 6-R-B10H12(-) to form the final neutral 6-R-B10H13 product. The 6-R-B10H13 derivatives also undergo ionic-liquid-mediated dehydrogenative alkyne-insertion reactions in biphasic bmimCl/toluene mixtures, and these reactions provide high yield routes to 3-R-1,2-R' 2-1,2-C2B10H9 ortho-carborane derivatives.     

Sulfur, tin and gold derivatives of 1-(2'-pyridyl)-ortho-carborane, 1-R-2-X-1,2-C2B10H10 (R = 2'-pyridyl, X = SH, SnMe3 or AuPPh3)

Reaction of the lithium salt of 1-(2'-pyridyl)-ortho-carborane, Li[1-R-1,2-C(2)B(10)H(10)](R = 2'-NC(5)H(4)), with sulfur, followed by hydrolysis, gave the mercapto-o-carborane, 1-R-2-SH-1,2-C(2)B(10)H(10) which forms chiral crystals containing helical chains of molecules linked by intermolecular S-H...N hydrogen bonds. The cage C(1)-C(2) and exo C(2)-S bond lengths (1.730(3) and 1.775(2)[Angstrom], respectively) are indicative of exo S=C pi bonding. The tin derivative 1-R-2-SnMe(3)-1,2-C(2)B(10)H(10), prepared from Li[1-R-1,2-C(2)B(10)H(10)] and Me(3)SnCl, crystallises with no significant intermolecular interactions. The pyridyl group lies in the C(1)-C(2)-Sn plane, oriented to minimise the NSn distance (2.861(3)[Angstrom]). The tin environment is distorted trigonal bipyramidal with axial N and Me. The gold derivative 1-R-2-AuPPh(3)-1,2-C(2)B(10)H(10), prepared from Li[1-R-1,2-C(2)B(10)H(10)] and AuCl(PPh(3)), reveals no NAu interaction in its crystal structure.     

Strikingly long C...C distances in 1,2-disubstituted ortho-carboranes and their dianions

Neutral and especially dianionic 6- and 12-vertex closo ortho-carboranes (o-carboranes) 1,2-R2-1,2-C2BnHn (R = H, CH3, NH2, OH, F, SiH3, PH2, SH, Cl, as well as e-, CH2-, NH-, O-, SiH2-, PH-, and S- exhibit extremely large variations (over 1 A!) of the cage CC distances, from 1.626 to 2.638 A, at the B3LYP/6-31G//B3LYP/6-31G DFT level. These CC "bond lengths," among the longest ever reported, generally are greater in the icosahedral than those in the corresponding octahedral systems and depend strongly on the substituents. While 1,2-(NH2)2-1,2-C2B10H10 has the longest Cc...Cc separation in neutral species (1.860 A), Cc...Cc distances can be much larger in the corresponding dianions. These range from 1.823 A (R- = e-) to 2.638 A (R- = CH2-) for 1,2-(R-)2-1,2-C2B10H10 and from 1.626 A (R- = SiH2-) to 3.099 A (R- = NH-) for 1,2-(R-)2-1,2-C2B4H4. Remarkably, there is no abrupt discontinuity over the entire range of CC lengths. Consequently, the relationship between the gradual changes in the distances and the nature of the bonding was analyzed by means of the form of the Kohn-Sham orbitals, the Wiberg Cc...Cc bond indices, and Bader AIM method. Cluster carboranes, and possibly other heteroboranes, thus appear to offer unique opportunities for modulating Cc...Cc distances.     

Direct and facile synthesis of carbon substituted alkylhydroxy derivatives of cobalt bis(1,2-dicarbollide), versatile building blocks for synthetic purposes

Reactions of lithiated cobalt bis(1,2-dicarbollide)(1(-)) anion (1(-)) in presence of paraformaldehyde, ethylene oxide or trimethylene oxide led to the substitution of 1(-) at the C-atoms resulting in the high yield formation of monosubstituted alkylhydroxy derivatives [(1-HO(CH(2))(n)-1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))-3,3'-Co(III)](-) (n = 1-3) isolated as caesium salts (Cs2, Cs3, Cs4) along with disubstituted products of general formulation [(HO(CH(2))(n)-1,2-C(2)B(9)H(10))(2)-3,3'-Co(III)](-) (n = 1-3) (Cs5, Cs6 and Cs7). Disubstituted compounds are in fact a mixture of diastereoisomers denoted as 1,1'-anti(rac-), 1,2'-syn- and in case of Cs6 and Cs7 also 1,2-vicinal-isomer, from which only the anti-isomer could be isolated in pure form in case of shorter chain compounds Cs5 and Cs6. All these alkylhydroxy derivatives can serve as versatile precursors for the generation of a variety of functional molecules. Thus, reaction of Me(3)NH4 with NaH and one equivalent of POCl(3) provided after hydrolysis the phosphorylated [(1-(HO)(2)P(O)OC(3)H(6)-1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))-3,3'-Co(III)](-) derivative, isolated in the form of trimethylammonium salt, Me(3)NH8 as the main product whereas reaction with half of the equivalent produces a high yield of phosphoric acid diester (Me(3)NH)(2)9 comprising in its structure two cages connected via propyl spacers to the central part. The calcium salt Ca(10)(2) of bridged ion [μ-(HOP(O)(OC(3)H(6))(2))-(1,2-C(2)B(9)H(10))(2)-3,3'-Co(III)](-) resulted from reaction of Me(3)NH7 with NaH and one equivalent of POCl(3) followed by hydrolysis and addition of CaCl(2). All new compounds were characterized by multinuclear NMR spectroscopy and mass spectrometry and the structure of Me(3)NH3 and that of the respective salts of the pure anti-stereoisomer of dialkylhydroxy derivatives Cs5 and Me(3)NH6 were established by X-ray crystallography.