关于重核强阻尼反应的研究

讨论了重核碰撞形成巨复合体系破裂的强阻尼反应产生超重核的问题。 评述了两种主要的理论模型: 唯象的多维朗之万模型和本课题组发展的微观输运理论模型。 概括阐述了微观输运理论研究反应 197Au+197Au , 238U+238U和244Pu+244Pu等的主要结果。 给出了反应中产生的超重碎块的几率与入射能的关系, 复合体系和超重碎块的衰变机制以及所形成的超重碎块的结合能和形状的分布。 In this paper, the possibility of producing superheavy fragments through strongly damped reactions in very massive nuclear collisions is investigated. Two theoretical models, which are the phenomenologically multi dimensional Langevin equation model and improved quantum molecular dynamics model developed recently by our group, are briefly reviewed. The dependence of the production probability of superheavy fragments on the incident energy, the decay mechanism of the composite systems and superheavy fragments, and the distributions of the binding energy and shapes of superheavy fragments are iscussed for reactions of 244Pu+244Pu, 238U+238U, 197Au+197Au based on the improved quantum molecular dynamics model.     

重离子碰撞复合体系碎化产生超重核可能性的探讨

讨论了通过重核碰撞形成的复合体系破裂产生超重核的问题。评述了两种主要的理论模型:即早期发展的在碎化理论框架下的量子涨落理论和本课题组尝试发展的微观输运理论模型。概括阐述了微观输运理论研究^197Au＋^197Au,^238U＋^238U和^244Pu＋^244Pu等反应的主要结果,即反应中产生的超重碎块的几率与入射能的关系,复合体系和超重碎块的衰变机制以及所形成的超重碎块的结合能和形状的分布。In this paper, the possibility of producing superheavy fragments through composite system breaking up in massive nuclear reactions is investigated. Two main theoretical models, which are the quantum fluctuations with in the fragmentation theory developed at 1980＇s and improved quantum molecular dynamics model developed recently by our group, are briefly reviewed. The dependence of the production probability of superheavy fragments on the incident energy, the decay mechanism of composite system and superheavy fragments, and the distribution of binding energy of Superheavy fragments are discussed for reactions of ^244Pu＋^244Pu, ^238U＋^238U, 197Au＋^197Au based on the improved quantum molecular dynamics model.     

变形核强阻尼碰撞中巨复合体系的形成和衰变

利用改进的量子分子动力学（ImQMD）模型研究了质心系入射能量为980 MeV时变形核238U+238U体系的3种不同碰撞模式（腹对腹、 尖对腹和尖对尖）下强阻尼反应过程中初级超重碎块的产生几率和复合体系的寿命、 形状和拉长取向等性质, 发现尖对腹碰撞模式有利于初级超重碎块的产生, 还发现这种碰撞模式产生的复合体系有最长的寿命。Three different collision modes ( Belly belly, Belly tip and Tip tip) of the deformed uranium nucleus 238U bombarding the deformed 238U in strongly damped reaction at the incident energy 980 MeV has been investigated based on the improved quantum molecular dynamics (ImQMD) model. The formation and properties of the formed composite system during the reaction process were carefully studied including the lifetime, the shape configuration and the angular distribution of primary fragment. It was found that the Belly tip mode is suitable for producing the super heavy fragments, and the composite system has the longest lifetime in this mode.     

超重核266Hs形成截面的入射道依赖

计算和比较了²⁶Mg+²⁴⁴Cm, ²⁷Al+²⁴³Am和³²S+²³⁸U3个反应系统的俘获截面和复合核²⁷⁰Hs形成截面. 在俘获截面计算中, 考虑了靶核形变效应. 穿越库仑势垒后, 反应系统由熔合谷进入不对称裂变谷. 只有越过不对称裂变谷中的条件鞍点的事件才进入复合核组态. 我们用考虑中子流动和径向运动的二参量Smoluchowski扩散方程来处理中间阶段的动力学过程. 此外, 还计算了经4n蒸发形成超重核²⁶⁶Hs的截面. 研究表明, 入射道的势垒分布, 中间阶段的条件鞍点高度对俘获截面, 复合核形成几率, 以及最终的超重核形成截面有显著影响.     

在重离子引起的深度非弹性反应中,中子过剩自由度的弛豫

本文回顾了在重离子引起的深度非弹性反应中,N/Z完全弛豫的实验结果。报道了关于非常不对称反应体系⁴⁰Ar（E_实=263 MeV）+²³⁸U,实验测得的反应产物之同位素分布。反应产物的鉴定是通过两个独立的飞行时间测量和两个（△E-E）测量的信息相结合,进行质量和电荷的双重鉴定来实现的。为了解释⁴⁰Ar+²³⁸U以及另外四个非常不对称反应体系(⁴⁰Ar+¹⁹⁷Au,³²S+²³⁸U,⁶³Cu+²³²Th和⁴⁰Ar+²³²Th)的实验所得同位素分布,本文提出了一个简单的经典模型,计算结果与所有实验的符合是十分令人满意的。     

19F+93Nb耗散反应的相互作用时间

测量了¹⁹F+⁹³Nb耗散反应产物的激发函数与角分布.从角分布的斜率提取的该反应系统的平均寿命在对称性较大的入射系统中反映了系统中耗散产物的特征时间;通过能量自关联函数方法从激发函数提取的反应时间不论在对称的还是在非对称的入射系统中都反映了耗散产物的特征时间.能量自关联函数还可以给出双核系统的转动角速度以及表征转动阻尼的退相干宽度,更好地描述双核系统随时间的整个演化过程.     

超重核合成的同位素依赖探讨

利用二参量Smoluchowski方程计算了54Fe+204Pb,56Fe+206Pb,58Fe+208Pb冷熔合和32,34,36S+238U热熔合的复合核形成截面和蒸发残余截面, 结果清楚地显示出超重核合成截面随同位素的变化。 由于较低的入射道库仑位垒、 较低的不对称裂变谷中的条件鞍点和较小的中子分离能, 一般地说, 丰中子同位素的超重核形成截面明显增强。 The cross sections of the compound nucleus formation and e vaporation residue for the 54Fe+204Pb, 56Fe+206Pb, 58Fe+208Pb cold fusion and 32,34, 36S+238U hot fusion have been calculated by using a two parameter Smoluchowski equation. Our results clearly show the isotope dependence of superheavy nucleus production. The formation cross sections of the neutron rich isotope are, generally speaking, obviously enhanced due to the lower Coloumb barrier , lower height of the conditional saddle point, and smaller neutron separation energy.     

垒下熔合裂变中观察到的异常

测量了¹⁶O+²³²Th、²³⁸U和¹⁹F+²³²Th近垒和垒下熔合裂变截面以及碎片角分布.包含靶核静态形变的耦合道理论解释了垒下熔合截面增强,预言了复合核系统自旋分布展宽.而实验上观察到的碎片角分布各向异性明显与裂变统计理论的预言不一致.     

新核素238Th的鉴别

利用60MeV/u的¹⁸O离子束轰击天然铀靶,通过多核子转移反应生成重丰中子新核素²³⁸Th.观测到了²³⁸Th的子体²³⁸Paγ活性的生长、衰变行为,鉴别了²³⁸Th的存在,并测得它的半衰期为(9.4±2.0)min.同时,发现了一条能量为(89.0±0.3)keV、半衰期为(8.9±1.5)min的新γ射线,指定为²³⁸Th的衰变γ射线.     

超重核合成的新进展

介绍了在充气分离器上用２４４Ｐｕ（４８ Ｃａ,３ｎ）２８９１１４和２０８ Ｐｂ（８４ Ｋｒ,ｎ）２９３１１８反应分别合成超重核２８９１１４和２９３１１８的新发现． Introduction of the first synthesis of new superheavy nuclei 289114 and 293118 in reactions of 48Ca+244 Pu and 86 Kr+ 208 Pb.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.