Synthesis of degradable molecular brushes via a combination of ring-opening polymerization and click chemistry

Acid-degradable molecular brushes with polycarbonate backbone and densely grafted side chains (∼1.9 SCs per backbone repeating unit) were synthesized for the first time using the grafting-onto method. Extremely efficient copper-catalyzed azide-alkyne cycloaddition click reactions between the polycarbonate backbone containing two pendant azido groups per backbone unit and alkynyl-terminated poly (methyl acrylate) (ay-PMA₇₂, average degree of polymerization DP = 72) SCs were demonstrated to finish in 10 min with a quantitative conversion of the azido groups. Similar grafting efficiencies were also achieved when using alkynyl-terminated polystyrene (ay-PS), poly(ethylene oxide) (ay-PEO), and poly (t-butyl acrylate)-b-polystyrene (ay-PtBA-b-PS) to successfully prepare molecular brushes with high grafting density (>1.8 SCs per backbone repeating unit). Under acidic condition, the polycarbonate backbones were completely degradable and the final degraded product of the molecular brushes was a linear polymer chain with molecular weight two times of the SCs. When a mixture of hydrophobic ay-PS and hydrophilic ay-PEO chains was used, amphiphilic heterobrushes PC-g-(PS-co-PEO) were synthesized, which could self-assemble into micelles or vesicles in selective solvents, depending on the ratio of the two SCs in the brush. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 239–248     

Synthesis of well-defined ABC triblock copolymers with polypeptide segments by ATRP and click reactions

Well-defined ABC block copolymers consisting of poly(ethylene oxide) monomethylene ether (MPEO) as A block, poly(styrene) (PS) as B block and poly(γ-benzyl-l-glutamate) (PBLG) as C block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. The bromine-terminated diblock copolymer poly(ethylene oxide) monomethylene ether-block-poly(styrene) (MPEO-PS-Br) was prepared by ATRP of styrene initiated with macro-initiator MPEO-Br, which was prepared from the esterification of MPEO and 2-bromoisobutyryl bromide, and converted into the azido-terminated diblock copolymer MPEO-PS-N₃ by simple nucleophilic substitutions in DMF in the presence of sodium azide. Propargyl-terminated PBLGs were synthesized by ring-opening polymerization of γ-benzyl-l-glutamate-N-carboxyanhydride in DMF at room temperature using propargyl amine as an initiator. ABC triblock copolymers MPEO-PS-PBLG with a wide range of number-average molecular weights from 1.55 to 3.75 × 10⁴ and a narrow polydispersity from 1.07 to 1.10 were synthesized via the click reaction of MPEO-PS-N₃ and the propargyl-terminated PBLG in the presence of CuBr and 1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABC block copolymers and corresponding precursors were characterized by NMR, IR and GPC. The results showed that click reaction was efficient. Therefore, a facile approach was offered to synthesize ABC triblock copolymers composed of crystallizable polymer MPEO, conventional vinylic polymer PS and rod-like α-helix polypeptide PBLG.     

Synthesis of basic molecular brushes: ATRP of 4-vinylpyridine in organic media

A poly(2-(2-bromopropionyloxy)ethyl methacrylate) (PBPEM) was used as macroinitiator in the synthesis of molecular brushes with poly(4-vinylpyridine) side chains, (P(BPEM-g-4VP). Atom transfer radical polymerization (ATRP) was employed as the polymerization technique. The polymerizations were carried out in DMF at 30 °C using a copper-chloride-based ATRP catalyst, which converted all the dormant polymer chain ends to alkyl chloride groups, thus minimizing branching and crosslinking, which occurred when a copper bromide-based catalyst was employed. Tris(2-pyridylmethyl)amine was selected as the ligand due to the high activity of its Cu^I complex in ATRP as well as its strong binding to both Cu^I and Cu^II, which prevented competitive complexation of the monomer or polymer to the metal center. In order to prevent crosslinking via radical coupling, the monomer conversion was kept low (under 3%) and the alkyl chloride end groups of P4VP side chains were converted to alkoxyamines upon activation followed by a reaction with TEMPO radical. Dynamic light scattering measurements showed the hydrodynamic diameter (D_H) of the brushes was pH-dependent. Aggregation of single P(BPEM-g-4VP) brushes in water was very pronounced at high pH values but was observed even when the amount of added HCl was enough to completely protonate the pyridine units (D_H = 278 nm).     

Synthesis,characterization, and molecular recognition of sugar‐functionalized nanoparticles prepared by a combination of ROP,ATRP, and click chemistry

The aim of this work was to prepare nanoparticles bearing sugar residues at their surface through the synthesis of amphiphilic block copolymer of poly d,l‐lactide (PLA) and poly(ethylene glycol)methacrylate, with the hydrophilic part terminating with glucopyranoside molecules as a model for any carbohydrate ligand. The construction was achieved by a combination of click chemistry, ring‐opening polymerization, and atom transfer radical polymerization. The modified monomer and resulting copolymer were characterized by NMR, SEC, and FTIR. Nanoparticles with a mean hydrodynamic diameter of <200 nm as determined by quasi‐elastic light scattering were prepared from the amphiphilic copolymer by nanoprecipitation using dimethylformamide (DMF) as water‐miscible solvent. In the range of 2.5–10 mg copolymer/mL DMF, the polymer concentration did not have much effect on the size of the nanoparticles. Accessibility of glucopyranoside molecules on the surface of the nanoparticles was confirmed by formation of aggregates from nanoparticles in the presence of concanavalin A observed by transmission electronic microscopy. Finally, no significant cytotoxicity toward human umbilical vein endothelial cells was detected for the final nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3178–3187, 2010     

Synthesis and self-assembly of pH-responsive amphiphilic dendritic star-block terpolymer by the combination of ROP, ATRP and click chemistry

Novel pH-responsive amphiphilic dendritic star-block poly(l-lactide)-b-poly(2-(N, N-diethylamino)ethyl methacrylate)-b-poly(ethylene oxide) (DPLLA-b-PDEAEMA-b-PEO) terpolymers were synthesized by the combination of ring-opening polymerization (ROP), atom transfer radical polymerization (ATRP), and click chemistry. DPLLAOH was synthesized by ROP of l-lactide (LLA) and then reacted with propargyl 3-carboxylic-propanoate to obtain alkynyl-DPLLA. PEO-b-PDEAEMA-Br was prepared by ATRP of DEAEMA and then reacted with NaN₃ to obtain PEO-b-PDEAEMA-N₃. DPLLA-b-PDEAEMA-b-PEO was easily prepared by click chemistry of alkynyl-DPLLA and PEO-b-PDEAEMA-N₃. DPLLA-b-PDEAEMA-b-PEO can assemble into micelles in water with PLLA segments as core and PEO segments as corona. The hydrophilicity/hydrophobicity of PDEAEMA can be adjusted with the alteration of pH values. Therefore, PDEAEMA segments form core or corona of micelles at pH ? 7 or pH < 7. Due to the pH-responsive property of PDEAEMA and unique structure of terpolymer, the size and conformation of the micelles can be changed to some extent by altering the pH values of solutions.     

Synthesis of PCL–graft–PS by combination of ROP, ATRP, and click chemistry

Poly(ε-caprolactone)–graft–polystyrenes were successfully synthesized by grafting an azide end-functionalized polystyrene onto a PCL backbone with multiple pendant alkyne moieties using a “click” chemistry reaction. Both precursors, the PCL backbone and the PS side chains, were prepared separately by two different living/controlled mechanisms, ring-opening polymerisation and ATRP, respectively. Molecular weights, polydispersity indexes, and chemical compositions of the backbone and branches were controlled. The subsequent copper-catalysed Huisgen 1,3-dipolar cycloaddition of PS onto PCL was achieved at room temperature with high conversion. However, a bimodal molecular weight distribution was observed in size exclusion chromatography due to the presence of unreacted PS. Nevertheless, crude product was purified by selective fractionation in cyclohexane to achieve pure graft copolymers.     

Synthesis of neoglycopolymers by a combination of "click chemistry" and living radical polymerization

The synthesis of novel well-defined alkyne side chain functional polymers featuring narrow molecular weight distributions (PDI = 1.09-1.17) by living radical polymerization is described. Grafting of protected and unprotected carbohydrates is achieved via either a C-6 or an anomeric azide (alpha or beta) onto these polymers by Cu(I)-catalyzed "click chemistry", providing a simple and efficient route to synthetic glycopolymers. The strategy provides an extremely powerful tool for the synthesis of libraries of materials that differ only in the nature of the sugar moiety presented on a well-defined polymer scaffold. A library of multivalent ligands were then prepared following a "coclicking" synthetic protocol, and the reactivity of these glycopolymers in the presence of concanavalin A and Ricinus communis agglutinin, model lectins able to selectively bind appropriate mannose and galactose derivatives, respectively, was assessed.     

Synthesis of amphiphilic copolymer brushes possessing alternating poly(methyl methacrylate) and poly(N‐isopropylacrylamide) grafts via a combination of ATRP and click chemistry

We report on the synthesis of well‐defined amphiphilic copolymer brushes possessing alternating poly(methyl methacrylate) and poly(N‐isopropylacrylamide) grafts, poly(PMMA‐alt‐PNIPAM), via a combination of atom transfer radical polymerization (ATRP) and click reaction (Scheme 1 ). Firstly, the alternating copolymerization of N‐[2‐(2‐bromoisobutyryloxy)ethyl]maleimide (BIBEMI) with 4‐vinylbenzyl azide (VBA) affords poly(BIBEMI‐alt‐VBA). Bearing bromine and azide moieties arranged in an alternating manner, multifunctional poly(BIBEMI‐alt‐VBA) is capable of initiating ATRP and participating in click reaction. The subsequent ATRP of methyl methacrylate (MMA) using poly(BIBEMI‐alt‐VBA) as the macroinitiator leads to poly(PMMA‐alt‐VBA) copolymer brush. Finally, amphiphilic poly(PMMA‐alt‐PNIPAM) copolymer brush bearing alternating PMMA and PNIPAM grafts is synthesized via the click reaction of poly(PMMA‐alt‐VBA) with an excess of alkynyl‐terminated PNIPAM (alkynyl‐PNIPAM). The click coupling efficiency of PNIPAM grafts is determined to be ～80%. Differential scanning calorimetry (DSC) analysis of poly(PMMA‐alt‐PNIPAM) reveals two glass transition temperatures (T_g). In aqueous solution, poly(PMMA‐alt‐PNIPAM) supramolecularly self‐assembles into spherical micelles consisting of PMMA cores and thermoresponsive PNIPAM coronas, which were characterized via a combination of temperature‐dependent optical transmittance, micro‐differential scanning calorimetry (micro‐DSC), dynamic and static laser light scattering (LLS), and transmission electron microscopy (TEM). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2608–2619, 2009     

Synthesis of degradable model networks via ATRP and click chemistry

A simple scheme involving atom transfer radical polymerization (ATRP) from a bifunctional initiator, conversion of the bromine end groups of the resulting telechelic polymer to azides, and cross-linking of this azido-telechelic macromonomer with multi-acetylene functionalized small molecules via copper-catalyzed azide-alkyne cycloaddition was employed to prepare the first tert-butyl acrylate model networks. This general scheme is wide in scope, enabling synthesis of model networks possessing defined pore size from any monomer polymerizable by ATRP. Introduction of an olefin moiety into the ATRP initiator enabled degradation of the materials by ozonolysis to yield star polymer products bearing three or four arms depending on which cross-linker was employed in the parent network. Size-exclusion chromatography of the ozonolysis products confirmed the pore size of the parent network and yielded insight into the number of unreacted functionalities. Model networks derived from a trifunctional alkyne were found to be more completely cross-linked than those derived from a tetrafunctional alkyne, presumably due to less steric hindrance in the former system.     

Synthesis of molecular nanocages by click chemistry

The covalent synthesis of nanosized cage compounds is easily performed in high yields using "click chemistry" methodology through the Cu(I)-catalyzed ligation of adequate polyalkyne and polyazide derivatives using (EtO)3P x CuI as catalyst.     

Synthesis of thermally responsive cylindrical molecular brushes via a combination of nitroxide-mediated radical polymerization and “grafting onto” strategy

Loosely grafted amphiphilic molecular brushes consisting of a hydrophobic polystyrene backbone and hydrophilic poly(ethylene glycol) monomethyl ether (MPEG) side chains, PS-MPEG, were synthesized by a novel two step method. In the first step, well-defined linear poly(p-chloromethylstyrene) PCMS with the degree of polymerization DP ≈ 200 and polydispersity index, M_w/M_n = 1.4 was prepared by bulk nitroxide (TEMPO)-mediated radical polymerization (NMP). In the second step, pendant p-chloromethyl units were coupled with activated chains of poly(ethylene glycol) monomethyl ether (MPEG) during the course of the Williamson etherification reaction. Using MPEG with M_n = 1100 g/mol over 50% repeating units on PCMS underwent nucleophilic substitution yielding a densely grafted brush with theoretical molecular weight M_n,th ≈ 123,000 g/mol. The molecular brush PS-MPEG assumed conformation of a stiff cylinder in both dilute toluene (non-selective good solvent for PS backbone and MPEG grafts) and water (selective for MPEG grafts) solutions as determined by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). The contour length L = 570 Å and L = 694 Å obtained by fitting the scattering data using model of Sharp-Bloomfield, Pedersen-Schurtenberger and Kholodenko worm revealed dimensions corresponding to theoretically estimated size of a single molecular brush. It was found that PS-MPEG molecular brush in dilute aqueous solutions exhibited lower critical solution temperature (LCST) in the physiological range.     

Synthesis of polymethylsiloxane molecular brushes

Dense purely methylsiloxane molecular brushes with high molecular masses were obtained by the ‘grafting to’ method. Vinyl groups of poly(vinyldimethylsiloxy)methylsiloxane were converted into (chlorodimethylsilyl)ethyl ones whose active chlorine atoms were replaced by monofunctional dimethylsiloxane oligomers having OLi terminal group to arrange side arms of the product. The molecular brushes thus prepared were characterized using physicochemical methods of analysis.     

Synthesis of an insulated molecular wire by click polymerization

We developed a new method for the synthesis of an organic-soluble insulated molecular wire (IMW) with permethylated cyclodextrin (PMCD); this method involves click polymerization of linked [2]rotaxane containing azide and alkynyl groups at both ends of a π-conjugated guest.     

Facile surface immobilization of ATRP initiators on colloidal polymers for grafting brushes and application to colloidal crystals

Bromo-initiators for atom transfer radical polymerization (ATRP) were successfully immobilized on the surfaces of cross-linked poly(methyl methacrylate) (PMMA) spheres by soap-free emulsion polymerization using CBr(4) as the chain transfer agent. Subsequent surface-initiated ATRP (SI-ATRP) afforded a layer of PMMA brushes covalently attached to the sphere surfaces. Colloidal crystal films of these monodisperse spheres were then studied to identify the relationship between variation in particle diameter and the optical properties. The particle diameters were controlled by varying the feed monomer proportions in soap-free emulsion polymerization and the thickness of the grafted brush layer. It was found that the particle diameter could successfully be controlled to obtain crystal films that produce a variety of brilliant colors in the visible region. The results of this study can provide useful information for facile preparation of surface-immobilized ATRP initiators on colloidal polymers and can be employed for grafting polymer brushes.     

Preparation of polymer brushes on attapulgite surfaces via a combination of CROP and click reaction

<正>In this work,by a combination of controlled ring-opening polymerization(CROP) and click reaction,we reported a facile and useful method to synthesize linear poly(ε-caprolactone) at attapulgite nanocomposites with well-defined structures.For this,first, the chlorine terminated attapulgite was prepared by the self-assembly of 3-chloropropyltrimethoxysiIane from the surfaces of attapulgite.And then,the terminal chlorines of modified attapulgite were substituted with azido groups.As the second step,linear propargyl-terminated poly(ε-caprolactone)(PCLs) with different molecular weights were synthesized by the CROP ofε-CL monomer in toluene with Sn(Oct)_2 as a catalyst and propargyl alcohol as an initiator.Finally,the azido-terminated attapulgites were reacted with propargyl-terminated PCLs via the click reactions.     

Chemoselective derivatization of a bionanoparticle by click reaction and ATRP reaction

Horse spleen apoferritin, the hollow protein shell derived from ferritin, a special biological nanoparticle, can be chemoselectively modified at the lysine residues, which affords a robust scaffold for further chemical reactions including Cu(i)-catalyzed azide-alkyne cycloaddition reaction and atom transfer radical polymerization reaction.     

Synthesis of inverse star block copolymer by combination of ATRP,ring opening polymerization,and “click chemistry”

The inverse star block copolymer, (poly(ε‐caprolactone)‐b‐polystyrene)₂‐core‐(poly(ε‐caprolactone)‐b‐polystyrene)₂, [(PCL‐PS)₂‐core‐(PCL‐PS)₂] has been successfully prepared by combination of atom transfer radical polymerization (ATRP), ring opening polymerization (ROP), and “Click Chemistry.” The synthesis includes the following five steps: (1) synthesis of a heterofunctional initiator with two ATRP initiating groups and two hydroxyl groups; (2) formation of (Br‐PS)₂‐core‐(OH)₂ via ATRP of styrene; (3) preparation of the (PCL‐PS)₂‐core‐(OH)₂ through “click” reaction of the α‐propargyl, ω‐acetyl terminated PCL with (N₃‐PS)₂‐core‐(OH)₂ which was prepared by transformation of the terminal bromine groups in (Br‐PS)₂‐core‐(OH)₂ into azide groups; (4) the ROP of CL using (PCL‐PS)₂‐core‐(OH)₂ as macroinitiator to form (PCL‐PS)₂‐core‐(PCL‐OH)₂; and (5) preparation of the (PCL‐PS)₂‐core‐(PCL‐PS)₂ through the ATRP of styrene using (PCL‐PS)₂‐core‐(PCL‐Br)₂ as macroinitiator which was prepared by reaction of the terminal hydroxyl groups at the end of the PCL chains with 2‐bromoisobutyryl bromide. The characterization data support structures of the inverse star block copolymer and the intermediates. The differential scanning calorimeter results and polarized optical microscope observation showed that the intricate structure of the inverse star block copolymer greatly restricted the movement of the PS segments and PCL segments, resulted in the increase of the glass transition temperature of PS segments and the decrease of crystallization ability of PCL segments. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7757–7772, 2008     

Synthesis of temperature responsive polymer brushes from polystyrene latex particles functionalized with ATRP initiator

Thermally responsive poly(N-isopropylacrylamide) (PNIPAAM) brushes were grafted from polystyrene particles synthesized with surfactant free emulsion polymerization and functionalized with a thin shell of ATRP initiator on the surface. The ATRP initiator was present in the shell either alone or along with copolymerized styrene and also a crosslinker. The grafted brushes were characterized with transmission electron microscopy before and after negative staining with uranyl acetate. Cryo-scanning electron microscopy confirmed the growth of extremely long PNIPAAM layers from the surface, which otherwise looked shrunken in the transmission electron microscope owing to dehydration and possibly the effect of staining agent. The amount of grafted polymer also increases proportionally to the increase of the monomer concentration in the initial reaction system. The change in character from hydrophilic to hydrophobic with temperature and salt was found to be reversible and fast. The adsorption of protein complexes (tobacco mosaic virus) could be readily achieved at higher temperatures indicating the potential of the grafted particles to be used as stationary phases in temperature regulated chromatographic separations.     

Synthesis of glycopolymers via click reactions

This mini-review describes recent work in the field of glycopolymer synthesis, with a focus on methods that have employed “click chemistry” and controlled polymerization methodology. A variety of carbohydrates with clickable groups such as azide, alkyne, and thiol moieties provide new routes to glycopolymers. Several studies use copper catalyzed azide-alkyne cycloaddition (CuAAC) reactions to synthesize glycomonomers or to incorporate carbohydrates into a clickable polymeric backbone. Alternatively, there are many thiol based click reactions which provide metal-free synthesis, which are discussed in details.     

New insights into the water-solubilisation of fluorophores by post-synthetic "click" and Sonogashira reactions

New synthetic methodologies for the efficient chemical conversion of hydrophobic fluorescent dyes into bioconjugable and water-soluble derivatives are described. The combined use of an original sulfonated terminal alkyne and a metal-mediated reaction, namely the copper-catalysed Huisgen 1,3-dipolar cycloaddition ("click" reaction) or the Sonogashira cross-coupling, is the cornerstone of these novel post-synthetic sulfonation approaches.