邻甲酚在类水滑石、焙烧及改性类水滑石上的吸附

用液相非稳态共沉淀法制备了Mg-Al 类水滑石(HTlc); Mg-Al HTlc 于450 ℃下焙烧得焙烧类水滑石(CHTlc); 采用结构重建法由CHTlc 制备了十二烷基硫酸根(DS－)插层(改性)类水滑石(DS·HTlc). 研究了邻甲酚在Mg-Al HTlc,CHTlc 和DS·HTlc 上的吸附行为: 邻甲酚在Mg-Al HTlc, CHTlc 和DS·HTlc 上的吸附动力学和等温式均分别符合准二级动力学方程和Freundlich 方程, 且吸附速率和吸附量大小均依次为: DS·HTlc>>CHTlc>HTlc; 在初始pH＝5.00～13.00 范围内, 邻甲酚在HTlc 和CHTlc 上的吸附量随pH 值的增加先增加后减小, 随温度的增加而增加, 邻甲酚在DS·HTlc 的吸附量随pH 值和温度的增加而降低; 邻甲酚在HTlc, CHTlc 和DS·HTlc 上的吸附量均随电解质(NaCl)浓度的增加而增加, 探讨了吸附机理. 研究结果表明, DS·HTlc 有望成为一种新型的高效酚类有机污染物处理剂.     

镁铝类水滑石对邻、间、对甲基苯酚的吸附

采用液相非稳态共沉淀法制备了镁铝类水滑石（Mg-Al HTlc）,并研究了邻、间和对甲基苯酚在Mg-Al HTlc上的吸附行为。 结果表明,邻、间和对甲基苯酚在Mg-Al HTlc上的吸附等温方程均符合Freundlich吸附等温式;吸附动力学均符合准二级动力学方程;在实验范围内,Mg-Al HTlc对三者的吸附量为：对甲基苯酚＞邻甲基苯酚＞间甲基苯酚;在pH值5.00~13.00范围内,三者的吸附量均随pH值的增加先增大后减小、随温度升高和电解质（NaCl）浓度的增大而增大。 探讨了吸附机理和苯环上甲基取代基位置对吸附的影响。     

谷氨酸插层水滑石吸附水中铅离子

采用共沉淀法合成了谷氨酸插层镁铝类水滑石(LDH),对所制备的试样进行了X-射线衍射和红外光谱表征,对LDH去除水中铅离子的能力进行了讨论,研究了吸附过程的吸附动力学和吸附等温线。结果表明,谷氨酸能嵌入镁铝水滑石的层间,该插层水滑石能有效吸附水中铅离子,吸附过程符合准二级动力学模型,吸附等温曲线可用Langmuir模型来描述,吸附量可达68.49mg/g。     

Fe3O4@HTlc的制备及其对甲基橙的吸附研究

采用液相非稳态共沉淀法制备了磁性镁铝类水滑石(Fe3O4@HTlc),采用透射电子显微镜、粉末X射线衍射仪、傅里叶变换红外光谱仪、振动样品磁强计、比表面分析仪、微电泳仪等对样品的形貌和结构进行了表征,并比较了 Fe3O4@HTlc和HTlc对甲基橙的吸附性能。结果表明,Fe3O4@HTlc为顺磁性、具有核-壳结构和较大比表面积、带有正电荷的近球状颗粒。甲基橙在Fe3O4@HTlc和HTlc上的吸附动力学曲线均符合准一级动力学方程;吸附等温线均符合Langmuir吸附等温式;298 K时Fe3O4@HTlc和HTlc对甲基橙的饱和吸附量分别为138.89和147.06 mg/g,但Fe3O4@HTlc对甲基橙有较强吸附推动力和较短的吸附平衡时间。二者对甲基橙的吸附量均随温度的升高和pH (5~11)的增加而降低。     

磁性镁铝类水滑石的制备及其对甲基橙的吸附研究

采用液相非稳态共沉淀法制备了磁性镁铝类水滑石(Fe_3O_4@HTlc),通过透射电子显微镜、粉末X射线衍射仪、傅里叶变换红外光谱仪、振动样品磁强计、比表面分析仪、微电泳仪等对样品的形貌和结构进行了表征,并比较了Fe_3O_4@HTlc和HTlc对甲基橙的吸附性能。结果表明,Fe_3O_4@HTlc为顺磁性的具有核-壳结构和较大比表面积并带有正电荷的近球状颗粒。甲基橙在Fe_3O_4@HTlc和HTlc上的吸附动力学曲线均符合准一级动力学方程,吸附等温线均符合Langmuir吸附等温式;298K时Fe_3O_4@HTlc和HTlc对甲基橙的饱和吸附量分别为138.89和147.06mg/g,且Fe_3O_4@HTlc对甲基橙有较强吸附推动力和较短的吸附平衡时间。二者对甲基橙的吸附量均随温度的升高和pH(5~11)的增加而降低。     

Mg/Al-NO_3 LDH吸附诺氟沙星的热力学和动力学研究

采用平衡吸附实验,研究了诺氟沙星在自制焙烧态镁铝水滑石(Mg/Al-NO_3 LDH)上的吸附热力学和动力学行为。结果表明,在固液比1∶500、p H=5.0、吸附温度25℃、离子强度0.1 mol/L的条件下,吸附1 h对诺氟沙星(20 mg/L)的吸附过程符合Langmuir等温线方程和准二级动力学,理论平衡吸附量达到32.05 mg/g。其热力学参数ΔG0 KJ/mol,ΔH0 KJ/mol,由此推断焙烧态镁铝水滑石对诺氟沙星的吸附是自发放热反应。     

草甘膦插层镁铝水滑石MgAl-LDH-gly的释放性能研究

采用成核/晶化隔离法将草甘膦(Glyphosate:gly)插层组装到镁铝水滑石层间,制得草甘膦插层镁铝水滑石(MgAl-LDH-gly).在水和碳酸钠溶液中考察了gly的释放性能,初步探讨了MgAl-LDH-gly在这两种溶液中的释放机理,认为其释放机理主要为离子交换,释放速率较大的初期符合一级动力学过程.用磷酸缓冲溶液考察环境pH值对MgAl-LDH-gly释放的影响,证明弱碱性(pH=7.6)和偏中性(pH=6.6)环境有利于其释放;探讨混合无机阴离子溶液中无机阴离子对MgAl-LDH-gly释放性能的影响,结果表明,MgAl-LDH-gly的释放速率及释出量在所考察范围内由溶液中无机阴离子的总浓度决定.     

不同锌铝比水滑石的合成及吸附脱除水中邻苯二甲酸性能的研究

采用共沉淀法合成一系列具有不同锌铝比的水滑石,并利用X射线衍射（XRD）、扫描电镜（SEM）、热重（TG）、氮气吸脱附及电感耦合等离子体质谱（ICP-MS）等表征手段对其结构与组成进行了测试。将上述水滑石材料用于吸附脱除水中邻苯二甲酸污染物,考察了不同锌铝比水滑石吸附邻苯二甲酸性能的差异。结果表明,在较低锌铝比时,随着水滑石锌铝比的增加,其对邻苯二甲酸的吸附量逐渐增大;当锌铝比较大时（>6）,随着锌铝比的增加,水滑石的吸附量基本保持不变。进一步选取锌铝比为6的水滑石,分别对其吸附邻苯二甲酸的动力学和热力学进行了研究,发现其吸附等温线和吸附动力学数据分别符合Freundlich等温吸附模型和准二级动力学模型,且循环吸附性能较好。     

不同锌铝比水滑石的合成及其吸附脱除水中邻苯二甲酸性能

采用共沉淀法合成一系列具有不同锌铝比的水滑石,并利用X射线衍射(XRD)、扫描电镜(SEM)、热重(TG)、氮气吸脱附及电感耦合等离子体质谱(ICP-MS)等表征手段对其结构与组成进行了测试。将上述水滑石材料用于吸附脱除水中邻苯二甲酸污染物,考察了不同锌铝比水滑石吸附邻苯二甲酸性能的差异。结果表明,在较低锌铝比时,随着水滑石锌铝比的增加,其对邻苯二甲酸的吸附量逐渐增大;当锌铝比较大时(6),随着锌铝比的增加,水滑石的吸附量基本保持不变。进一步选取锌铝比为6的水滑石,分别对其吸附邻苯二甲酸的动力学和热力学进行了研究,发现其吸附等温线和吸附动力学数据分别符合Freundlich等温吸附模型和准二级动力学模型,且循环吸附性能较好。     

玉米芯粉对中性红的吸附脱色研究

本文研究了玉米芯粉对染料的吸附脱色情况,结果表明,玉米芯粉能有效吸附阳离子染料。以阳离子染料中性红为模型,考察了吸附剂用量、溶液浓度、溶液p H以及温度等对吸附平衡的影响,结果表明玉米芯粉吸附中性红符合拟二级动力学方程;不同温度下,该吸附过程符合Langmuir方程和Freundlich方程,qmax、KF受温度影响小;D-R等温方程拟合结果表明该吸附是以化学吸附为主;热力学参数计算结果表明玉米芯粉吸附中性红是一个熵减的自发放热过程。其他电解质的存在不利于吸附反应的进行。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.