(Co)polymers of oligo(ethylene glycol) methacrylates—temperature‐induced aggregation in aqueous solution

The synthesis and aggregation behavior of well‐defined thermosensitive (co)polymers of oligo(ethylene glycol) methacrylates (POEGMA) in aqueous solutions were investigated. The cloud points of the POEGMAs solutions were determined by turbidimetry and dynamic light scattering. For POEGMA (co)polymers the cloud point temperature (T_CP) increased linearly with increasing content of more hydrophilic comonomer. The mesoglobules formed by POEGMAs in dilute aqueous solutions above T_CP were studied by light scattering. The size of mesoglobules depended on the concentration and the heating procedures. The aggregates became smaller with decreasing initial concentration of polymer and increasing rates of temperature change. By selecting the proper heating and dilution procedures, the influence of the (co)polymer structure on the size of the mesoglobules could be determined. The size of the mesoglobules decreased with the length of the OEG side chains and increased with increasing content of more hydrophilic comonomer. The light scattering parameters of the mesoglobules—A₂ values and shape factors ${R_{\rm g}\over R_{\rm h}}$ —suggested that the hydrophilic OEG side chains placed at the periphery of the mesoglobules in direct contact with the surrounding water controlled the size of mesoglobules and their stability. Shape factors for all POEGMA mesoglobules indicated that the mesoglobules remained highly hydrated after formation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Unexpected Chiro‐Thermoresponsive Behavior of Helical Poly(phenylacetylene)s Bearing Elastin‐Based Side Chains

The thermoresponsive behavior of an elastin‐based polymer can be altered by the polymeric macromolecular conformation. Thus, when the elastin basic amino acid sequence VPGVG is used as a pendant group of a poly(phenylacetylene) (PPA) its thermoresponsive behavior in water can be remotely detected through conformational changes on the formed helix. Circular dichroism at different temperatures shows an inversion of the first Cotton effect (450 nm) at 25.8 °C that matches with the cloud point temperature. The elastin‐based side‐chain poly(phenylacetylene) shows an upper critical solution temperature with low pH and concentration dependency, not expected in elastin‐based polymers. It was found that the polymer self‐assembles in water into spherical nanoparticles with hydrodynamic diameters of 140 nm at the hydrophobic state.     

Acid‐Labile Thermoresponsive Copolymers That Combine Fast pH‐Triggered Hydrolysis and High Stability under Neutral Conditions

Biodegradable polymeric materials are intensively used in biomedical applications. Of particular interest for drug‐delivery applications are polymers that are stable at pH 7.4, that is, in the blood stream, but rapidly hydrolyze under acidic conditions, such as those encountered in the endo/lysosome or the tumor microenvironment. However, an increase in the acidic‐degradation rate of acid‐labile groups goes hand in hand with higher instability of the polymer at pH 7.4 or during storage, thus posing an intrinsic limitation on fast degradation under acidic conditions. Herein, we report that a combination of acid‐labile dimethyldioxolane side chains and hydroxyethyl side chains leads to acid‐degradable thermoresponsive polymers that are quickly hydrolyzed under slightly acidic conditions but stable at pH 7.4 or during storage. We ascribe these properties to high hydration of the hydroxy‐containing collapsed polymer globules in conjunction with autocatalytic acceleration of the hydrolysis reactions by the hydroxy groups.     

Semiconducting polymers based on charge-transfer complexes. IV. Electrical properties and structure of polymeric charge-transfer complexes

Model electron donor molecules, 10-methylphenothiazine and 4-(methylthio)anisole, and polymeric electron donors which contained these molecules on the side chains of N-acyl-substituted polyethylenimines, were complexed with the electron acceptors, dichlorodicyanoquinone (DDQ), tetracyanoquinodimethane (TCNQ), tetracyanoethylene (TCNE), and tetranitrofluorenone (TNF). The model donors formed 1:1 complexes with all the acceptors except TCNE. The polymeric donors formed amorphous complexes with DDQ, TCNQ, and TCNE. Crystalline complexes were formed with TNF which had low melting points (lower than the model complexes and the pure polymer). This is apparently due to poor lateral packing of the polymer chains. Electrical resistivities were lower for all the polymer complexes than for the corresponding model complexes. Electrical resistivity also decreased with increase in complex crystallinity. In the best case the polymer complex was two hundred times as conducting as the model. The concentration of unpaired electrons measured by EPR was nearly independent of temperature. Most of the electrons seen are trapped and do not participate in conduction. Thermal activation energies for conduction were in the range of 0.5–1.8 eV and were nearly equal for the model and corresponding polymeric complexes. Elongation of polymer complex with TCNQ by rolling produces a decrease in resistivity in the roll direction, although the complex is amorphous. This reinforces the hypothesis that conduction is parallel to the polymer backbone. A polymer–tetranitrofluorenone complex was photoconducting, though the photoconductivity was smaller than the dark conductivity at the level of illumination used. Dember and Seebeck effects indicated that the major carrier in the complex was holes.     

Nanoscale Inhomogeneities in Thermoresponsive Polymers

This article highlights the occurrence and nature of nanoscale inhomogeneities in thermoresponsive polymers and focuses on different experimental techniques for their observation and characterization. Such inhomogeneities can be regarded as nanoscopic domains of collapsed polymer segments (or of a small number of unimers), which provide a nonpolar, hydrophobic interior. Continuous wave (CW) electron paramagnetic resonance (EPR) spectroscopy on amphiphilic reporter molecules (spin probes) as an intrinsically local technique is particularly emphasized. In combination with different ensemble‐averaging methods, it provides a holistic understanding of the often inhomogeneous nanoscale processes during the temperature‐induced collapse of a thermoresponsive polymer.     

Importance of bound water in hydration-dehydration behavior of hydroxylated poly(N-isopropylacrylamide)

In this study, a differential scanning calorimetric analysis was performed to investigate the role of water existing around the polymer chains on their thermoresponsive behaviors using the novel functional temperature-sensitive copolymer, poly(N-isopropylacrylamide-co-2-hydroxyisopropylacrylamide) (poly(NIPAAm-co-HIPAAm)). The HIPAAm comonomers were incorporated into the polymeric chains as hydrophilic parameters, and then the hydration states of poly(NIPAAm-co-HIPAAm) with various HIPAAm compositions were examined. Bound water, which is affected by the polymeric chains to some extent, was produced by adding the copolymers to the water, and the temperature due to the melting of the bound water decreased as the HIPAAm content increased. On the basis of this result, we considered that the interaction between the bound water and the polymeric chains is reinforced by the increasing HIPAAm composition. In addition, the cloud points of the copolymers shifted to a higher temperature, and the endothermic enthalpy for the phase transition decreased with increasing the HIPAAm content, suggesting that the number of water molecules disassociated from the polymeric chains decreased. Based on these results, we postulate that the changes in the interaction between the thermosensitive polymer and bound water exert a strong influence on its phase transition and/or separation, such as the cloud point or dehydration behavior.     

Aggregation and thermoresponsive properties of new star block copolymers with a cholic acid core

Poly(allyl glycidyl ether) (PAGE) and poly(ethylene glycol) (PEG) blocks were sequentially grown via anionic polymerization to form four block copolymer arms on a cholic acid (CA) core, yielding star block copolymers (CA(AGE(8)-b-EG(n))(4)) with low polydispersities (ca. 1.05). The introduction of PAGE segments into CA(PEG)(4) significantly reduced their crystallinity. The polymers can aggregate in water at room temperature above their critical aggregation concentration. The copolymers are thermoresponsive; their behavior in aqueous solutions was studied by the use of UV-visible spectroscopy, dynamic light scattering, and transmission electron microscopy. Their cloud points vary from 13 to 55 °C with increasing length of the PEG segments. Double thermoresponsive behavior was observed with short PEG segments because of a two-step transition process: small micelles are formed upon heating and then further aggregate into micellar clusters through the association of PEG chains.     

Thermoresponsive micelles from Jeffamine-b-poly(L-glutamic acid) double hydrophilic block copolymers

Double hydrophilic block copolymers (DHBC) consisting of a Jeffamine block, a statistical copolymer based on ethylene oxide and propylene oxide units possessing a lower critical solution temperature (LCST) of 30 degrees C in water, and poly(L-glutamic acid) as a pH-responsive block were synthesized by ring-opening polymerization of gamma-benzyl-L-glutamate N-carboxyanhydride using an amino-terminated Jeffamine macroinitiator, followed by hydrolysis. This DHBC proved thermoresponsive as evidenced by dynamic light scattering and small-angle neutron scattering experiments. Spherical micelles with a Jeffamine core and a poly(L-glutamic acid) corona were formed above the LCST of Jeffamine. The size of the core of such micelles decreased with increasing temperature, with complete core dehydration being achieved at 66 degrees C. Such behavior, commonly observed for thermosensitive homopolymers forming mesoglobules, is thus demonstrated here for a DHBC that self-assembles to generate thermoresponsive micelles of high colloidal stability.     

Hyperbranched polymers with thermoresponsive property highly sensitive to ions

The salt effects on the water solubility of thermoresponsive hyperbranched polyethylenimine and polyamidoamine possessing large amounts of isobutyramide terminal groups (HPEI-IBAm and HPAMAM-IBAm) were studied systematically. Eight anions with sodium as the counterion and ten cations with chloride as the counterion were used to measure the anion and cation effects on the cloud point temperature (T(cp)) of these dendritic polymers in water. It was found that the T(cp) of these dendritic polymers was much more sensitive to the addition of salts than that of the traditional thermoresponsive linear polymers. At low anion concentration, the electrostatic interaction between anions and the positively charged groups of these polymers was dominant, resulting in the unusual anion effect on the T(cp) of these polymers in water, including (1) T(cp) of these dendritic polymers decreasing nonlinearly with the increase of kosmotropic anion concentration; (2) the chaotropic anions showing abnormal salting-out property at low salt concentration and the stronger chaotropes having much pronounced salting-out ability; (3) anti-Hofmeister ordering at low salt concentration. At moderate to high salt concentration, the specific ranking of these anions in reducing the T(cp) of HPEI-IBAm and HPAMAM-IBAm polymers was PO(4)(3-) > CO(3)(2-) > SO(4)(2-) > S(2)O(3)(2-) > F(-) > Cl(-) > Br(-) > I(-), in accordance with the well-known Hofmeister series. At moderate to high salt concentration, the specific ranking order of inorganic cations in reducing the T(cp) of HPEI-IBAm polymer was Sr(2+) ≈ Ba(2+) > Na(+) ≈ K(+) ≈ Rb(+) > Cs(+) > NH(4)(+) ≈ Ca(2+) > Li(+) ≈ Mg(2+). This sequence was only partially similar to the typical Hofmeister cation series, whereas at low salt concentration the cation effect on T(cp) of the dendritic polymer was insignificant and no obvious specific ranking order could be found.     

Specific thermosensitive volume change of biopolymer gels derived from propylated poly(γ-glutamate)s

Thermosensitive biopolymers with an amphipathic structure were synthesized through the propyl esterification of the carboxyl groups of poly(γ-glutamic acid) (γ-PGA). The clouding temperature on heating was controlled by the addition of different amounts of NaCl and by the degree of esterification. The clearing temperature on cooling was independent of the aqueous milieu, presumably because of the strong multiple hydrogen bonds between the polymer chains formed in the collapsed state. The hydrogel of γ-PGA propylate crosslinked by a chemical reaction with hexamethylene diisocyanate also showed pH-responsive and thermoresponsive shrinking, but the volume recovery was incomplete during the cooling process. A Fourier transform infrared/attenuated total reflection study showed that the incomplete volume recovery might be associated with the amide hydrogen bonding being strengthened by the chemical crosslinkage. The addition of urea made the volume change complete. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4492–4501, 2004     

Thermoresponsive Supramolecular Dendronized Polymers

Combining the concepts of supramolecular polymers and dendronized polymers provides the opportunity to create bulky polymers with easy structural modification and tunable properties. In the present work, a novel class of side‐chain supramolecular dendronized polymethacrylates is prepared through the host–guest interaction. The host is a linear polymethacrylate (as the backbone) attached in each repeat unit with a β‐cyclodextrin (β‐CD) moiety, and the guest is constituted with three‐fold branched oligoethylene glycol (OEG)‐based first‐ (G1) and second‐generation (G2) dendrons with an adamantyl group core. The host and guest interaction in aqueous solution leads to the formation of the supramolecular polymers, which is supported with ¹H NMR spectroscopy and dynamic light scattering measurements. The supramolecular formation was also examined at different host/guest ratios. The water solubility of hosts and guests increases upon supramolecular formation. The supramolecular polymers show good solubility in water at room temperature, but exhibit thermoresponsive behavior at elevated temperatures. Their thermoresponsiveness is thus investigated with UV/Vis and ¹H NMR spectroscopy, and compared with their counterparts formed from individual β‐CD and the OEG dendritic guest. The effect of polymer concentration and molar ratio of host/guest was examined. It is found that the polar interior of the supramolecules contribute significantly to the thermally‐induced phase transitions for the G1 polymer, but this effect is negligible for the G2 polymer. Based on the temperature‐varied proton NMR spectra, it is found that the host–guest complex starts to decompose during the aggregation process upon heating to its dehydration temperature, and this decomposition is enhanced with an increase of solution temperature.     

Gemini表面活性剂对疏水缔合聚丙烯酰胺界面吸附膜扩张流变性质的影响

采用小幅低频振荡和界面张力弛豫技术, 考察了疏水缔合水溶性聚丙烯酰胺(HMPAM)在正癸烷-水界面上的扩张黏弹性质, 研究了不对称Gemini表面活性剂C₁₂COONa-p-C₉SO₃Na对其界面扩张性质的影响. 研究发现, 疏水链段的存在, 使HMPAM在界面层中具有较快的弛豫过程, 扩张弹性显示出明显的频率依赖性. 表面活性剂分子可以通过疏水相互作用与聚合物的疏水嵌段在界面上形成类似于混合胶束的特殊聚集体. 表面活性剂分子与界面聚集体之间存在快速交换过程, 可以大大降低聚合物的扩张弹性. 同时, 聚合物分子链能够削弱表面活性剂分子长烷基链之间的强相互作用, 导致混合吸附膜的扩张弹性远低于单独表面活性剂吸附膜.     

Specific thermoresponsive behaviours exhibited by optically active and inactive phenylalanine modified hyperbranched polyethylenimines in water

Optically active and inactive hyperbranched polymers with specific thermoresponsive behaviours in water were reported.Through two steps hyperbranched polyethylenimine (HPEI) polymers terminated with different amount of D-phenylalanine (D-Phe),L-phenylalanine (L-Phe) or DL-phenylalanine (DL-Phe) were prepared and characterized.The analyses on the solution properties by turbidimetry,dynamic light scattering,fluorescence probe and 1H-NMR demonstrated that all the polymers exhibited specific thermoresponsive behaviours in water,including:(1) In the dilute polymer concentration region,increasing the polymer concentration led to the increase of phase transition temperature;(2) The optically inactive thermoresponsive hyperbranched polymers showed a higher cloud-point temperature (Tcp) than their corresponding optically active ones in a relatively higher polymer concentration;(3) At the same polymer concentration the hydrophobic groups of the optically inactive HPEI-DL-Phe formed more perfect hydrophobic domain than those of the optically active HPEI-L-Phe and HPEI-D-Phe.     

Tuning of Thermoresponsivity of a Poly(2‐alkyl‐2‐oxazoline) Block Copolymer by Interaction with Surface‐Active and Chaotropic Metallacarborane Anion

Thermoresponsive nanoparticles based on the interaction of metallacarboranes, bulky chaotropic and surface‐active anions, and poly(2‐alkyl‐2‐oxazoline) block copolymers were prepared. Recently, the great potential of metallacarboranes have been recognized in biomedicine and many delivery nanosystems have been proposed. However, none of them are thermoresponsive. Therefore, a thermoresponsive block copolymer, poly(2‐methyl‐2‐oxazoline)‐block‐poly(2‐n‐propyl‐2‐oxazoline) (PMeOx–PPrOx), was synthesized to encapsulate metallacarboranes. Light scattering, NMR spectroscopy, isothermal titration calorimetry, and cryogenic TEM were used to characterize all solutions of the formed nanoparticles. The cloud‐point temperature (T_CP) of the block copolymer was observed at 30 °C and polymeric micelles formed above this temperature. Cobalt bis(dicarbollide) anion (COSAN) interacts with both polymeric segments. Depending on the COSAN concentration, this affinity influenced the phase transition of the thermoresponsive PPrOx block. The T_CP shifted to lower values at a lower COSAN content. At higher COSAN concentrations, the hybrid nanoparticles are fragmented into relatively small pieces. This system is also thermoresponsive, whereby an increase in temperature leads to higher polymer mobility and COSAN release.     

Using 2-isopropyl-2-oxazine to explore the effect of monomer distribution and polymer architecture on the thermoresponsive behavior of copolymers

Poly(cyclic imino ether)s (PCIE) have emerged as a highly promising class of polymer for use in biomedical applications with their value being derived from their excellent biocompatibility, diverse chemistry, and tunable hydrophilicity. Here, we investigate the properties of poly(2-isopropyl-2-oxazine) (PiPrOz), a relatively unexplored PCIE, determining it to have a cloud point temperature (T_cp) below physiological temperature, not to crystallize from bulk or in solution, and to be highly biocompatible. Furthermore, a series of copolymers consisting of iPrOz and 2-methyl-2-oxazine (MeOz) was investigated with regard to the effect of monomer distribution and polymer architecture on thermoresponsive properties. To this end, linear block and statistical co-poly(2-oxazine)s (co-POz), along with three comb-shaped POz with block or statistical POz side chains were prepared. Each of the five polymers showed distinct thermoresponsive behavior, with the linear block co-POz undergoing micelle formation and the other polymers macroscopic phase-separation at different T_cps. The variety observed in response to heating clearly highlights the importance of monomer sequence and polymer architecture when designing thermoresponsive polymers. We anticipate that our findings will prove useful to polymer chemists seeking to prepare novel thermoresponsive biomaterials.     

Separation of peptides with an aqueous mobile phase by temperature-responsive chromatographic column (J. Sep. Science 35'16)

DOI: 10.1002/jssc.201200247 A thermoresponsive chromatographic material was prepared through a simple method and employed for the temperature-modulated separation of peptides in an aqueous mobile phase. At 10°C, the grafted polymer chains are hydrophilic and in the form of extended coil. In this case, the peptides were unable to be separated and showed a single peak in chromatograms. In contrast, the polymer is hydrophobic and in the form of collapsed globule at 50°C. In this case, the peptides were completely separated because of the enhanced hydrophobic interaction of peptides and stationary phase.     

Effect of pressure on thermal conductivity and pressure collapse of ice in a polymer-hydrogel and kinetic unfreezing at 1 GPa

We report a study of aqueous solutions of poly(vinylalcohol) and its hydrogel by thermal conductivity, κ, and specific heat measurements. In particular, we investigate (i) the changes in the solution and the hydrogel at 0.1 MPa observed in the 350-90 K range and of the frozen hydrogel at 130 K observed in the range from 0.1 MPa to 1.3 GPa, and (ii) the nature of the pressure collapse of ice in the frozen hydrogel and kinetic unfreezing on heating of its high density water at 1 GPa. The water component of the polymer solution on cooling either first phase separates and then freezes to hexagonal ice or freezes without phase separation and the dispersed polymer chains freeze-concentrate in nanoscopic and microscopic regions of the grain boundaries and grain junctions of the ice crystals in the frozen state of water in the hydrogel. The change in κ with temperature at 1 bar is reversible with some hysteresis, but not reversible with pressure after compression to 0.8 GPa at 130 K. At high pressures the crystallized state collapses showing features of κ and specific heat characteristic of formation of high density amorphous solid water. The pressure of structural collapse is 0.08 GPa higher than that of ice at 130 K. The slowly formed collapsed state shows kinetic unfreezing or glass-liquid transition temperature at 140 K for a time scale of 1 s. Comparison with the change in the properties observed for ice shows that κ decreases when the polymer is added.     

Local Extraction and Condensation under a Microscope Using the Optically Controlled Phase Separation of a Thermoresponsive Polymer

In‐situ extraction and condensation of various dyes were carried out in a phase‐separation region of a thermoresponsive polymer aqueous solution generated by near infrared (NIR) laser heating under a microscope. The NIR laser irradiation was directed at a chromium line deposited on a glass substrate, thereby causing local heating of the solution due to the photothermal effect. A phase‐separation region was formed by dehydration of the thermoresponsive polymer followed by ejection of water outside of the phase‐separation region. When various dyes were included in the solution, some dye molecules were extracted into the phase‐separation region, where they condensed. In the case of poly(N‐isopropylacrylamide) (PNIPAM, 10 wt % in an aqueous solution) as the thermoresponsive polymer and crystal violet (CV) as the dye (0.1 mM ), CV condensed by about 25 times. It was found that one of the necessary conditions for the extraction/condensation is the hydrophobicity of the dye molecule; however, the dominant cause for accumulating inside the PNIPAM chain is the molecular interaction between the amide group in the side chain of PNIPAM and the functional groups such as carbonyl or amino groups in the dye molecules.     

FORMATION OF MESOGLOBULES BY POLY(N,N-DIETHYLACRYLAMIDE) CHAINS IN DILUTE SOLUTIONS

The association of poly(N,N-diethylacrylamide)(PDEA) chains has been investigated by a combination of static and dynamic laser light scattering(LLS).Unlike poly(N-isopropylacrylamide)(PNIPAM),PDEA chains can not form the C=O…H-N hydrogen bonds.Our results demonstrate that a limited number of PDEA chains collapse and associate into metastable globules in dilute solutions.The heating rate has great effect on the mesoglobule size.The formation of such mesoglobules is attributed to the competition between in...     

Synthesis and characterization of core–shell‐type polymeric micelles from diblock copolymers via reversible addition–fragmentation chain transfer

A method was developed to enable the formation of nanoparticles by reversible addition–fragmentation chain transfer polymerization. The thermoresponsive behavior of polymeric micelles was modified by means of micellar inner cores and an outer shell. Polymeric micelles comprising AB block copolymers of poly(N‐isopropylacrylamide) (PIPAAm) and poly(2‐hydroxyethylacrylate) (PHEA) or polystyrene (PSt) were prepared. PIPAAm‐b‐PHEA and PIPAAm‐b‐PSt block copolymers formed a core–shell micellar structure after the dialysis of the block copolymer solutions in organic solvents against water at 20 °C. Upon heating above the lower critical solution temperature (LCST), PIPAAm‐b‐PHEA micelles exhibited an abrupt increase in polarity and an abrupt decrease in rigidity sensed by pyrene. In contrast, PIPAAm‐b‐PSt micelles maintained constant values with lower polarity and higher rigidity than those of PIPAAm‐b‐PHEA micelles over the temperature range of 20–40 °C. Structural deformations produced by the change in the outer polymer shell with temperature cycles through the LCST were proposed for the PHEA core, which possessed a lower glass‐transition temperature (ca. 20 °C) than the LCST of the PIPAAm outer shell (ca. 32.5 °C), whereas the PSt core with a much higher glass‐transition temperature (ca. 100 °C) retained its structure. The nature of the hydrophobic segments composing the micelle inner core offered an important control point for thermoresponsive drug release and the drug activity of the thermoresponsive polymeric micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3312–3320, 2006