Complexometric titration of gallium, indium and thallium(III) using sodium azide as a metal indicator

Summary Thallium(III) has been determined between pH 4.0 and 6.0 by titration against EDTA using sodium azide as indicator. The metal ion gives a bright yellow colour which is discharged at the equivalence point. Micro-quantities upto about 1 mg of the metal have been determined with accuracy. The end-point has also been determined photometrically. Gallium(III) and indium(III) can also be determined by back-titration of the excess of EDTA added to each of these ions against a standard ferric chloride solution using sodium azide as indicator.

---

Zusammenfassung Thallium(III) wird durch Titration mit ÄDTA-Lösung bei pH 4,0–6,0 gegen Natriumazid als Indicator bestimmt. Der Umschlag am Endpunkt erfolgt von Gelb nach Farblos. Mikromengen bis zu 1 mg können mit guter Genauigkeit erfa\t werden. Die Bestimmung kann auch photometrisch durchgeführt werden. Gallium(III) und Indium(III) können durch Rücktitration von überschüssigem ÄDTA mit Eisen(III)-chloridlösung bestimmt werden, wobei ebenfalls Natriumazid als Indicator dient.

     

Gadolinium(III) Porpholactones as Efficient and Robust Singlet Oxygen Photosensitizers

Construction of Gd^III photosensitizers is important for designing theranostic agents owing to the unique properties arising from seven unpaired f electrons of the Gd³⁺ ion. Combining these with the advantages of porpholactones with tunable NIR absorption, we herein report the synthesis of Gd^III complexes Gd‐1 – 4 ( 1 , porphyrin; 2 , porpholactone; 3 and 4 , cis‐ and trans‐porphodilactone, respectively) and investigated their function as singlet oxygen (¹O₂) photosensitizers. These Gd complexes displayed ¹O₂ quantum yields (Φ_Δs) from 0.64–0.99 with the order Gd‐1 < Gd‐2 < Gd‐3 < Gd‐4 . The gradually enhanced ¹O₂ sensitization after β‐oxazolone moiety replacement was ascribed to the narrowing of the energy gap (ΔE) between the lowest triplet states (T₁) of the ligand and the energy level of the ¹Δ_g→³Σ_g transition of ¹O₂. In particular, Gd‐4 is capable of excitation in the visible to NIR region (400–700 nm) with a quantum yield near unity. These Gd complexes were first demonstrated as efficient photosensitizers in photocatalysis such as oxidative C?H bond functionalization of secondary or tertiary amines, and the oxygenation of the natural product cholesterol. Finally, after glycosylation, these water‐soluble Gd complexes showed potential applications in photodynamic therapy (PDT) in HeLa cells. This work revealed that Gd^III complexes of “bioinspired” β‐modified porpholactones are efficient NIR photosensitizers and form a chemical basis to construct appealing photocatalysts and theranostic agents based on lanthanides.     

Synthesis, spectroscopic, and in vitro photosensitizing efficacy of ketobacteriochlorins derived from ring-B and ring-D reduced chlorins via pinacol-pinacolone rearrangement

In this report, we present a regioselective oxidation of a series bacteriochlorins, which on reacting with either ferric chloride (FeCl(3)) or 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) yielded the corresponding ring-B or ring-D reduced chlorins. The effect of the number of electron-withdrawing groups present at the peripheral position, with or without a fused isocyclic ring (ring-E), did not make any significant difference in regioselective oxidation of the pyrrole rings. However, depending on the nature of substituents, the intermediate bis-dihydroxy bacteriochlorins on subjecting to pinacol-pinacolone reaction conditions gave various ketochlorins. The introduction of the keto-group at a particular position in the molecule possibly depends on the stability of the intermediate carbocation species. The newly synthesized bacteriochlorins show strong long-wavelength absorption and produced significant in vitro (Colon26 cells) photosensitizing ability. Among the compounds tested, the bacteriochlorins containing a keto-group at position 7 of ring-B with cleaved five-member isocyclic ring showed the best efficacy.     

Comparative study on 2-amino-1,4-naphthoquinone derived ligands as indium (III) selective PVC-based sensors

The three different ligands (Q₂ to Q₄) based on 2-amino-1,4-naphthoquinone (Q₁), have been synthesized and explored as neutral ionophores for preparing polyvinyl chloride-based membrane sensors selective to indium (III). The addition of potassium tetrakis(4-chlorophenyl) borate and various plasticizers, viz., o-NPOE, DBP, DBBP, DOP and CN has been found to substantially improve the performance of the sensors. The best performance was obtained with the sensor no. 16 having membrane of ligand (Q₂) with composition (%, w/w) ionophore Q₂ (3.0%):PVC (30.0%):o-NPOE (63.0%):KTpClPB (4.0%). This sensor exhibits Nernstian response with slope 19.8 mV/decade of activity in the concentration range 2.5 × 10⁻⁷ to 1.0 × 10⁻² M indium (III), performs satisfactorily over wide pH range of (2.5-7.5) with a fast response time (10 s). The sensor was also found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of acetonitrile, ethanol and methanol. The proposed sensor can be used over a period of 3.5 months without significant drift in potentials. The quantitative application of sensor was also evaluated by comparative analysis of artificially made sea water with AAS.     

Remote stereocontrol using allylstannanes: reversal in stereoselectivity using indium(III) and bismuth(III) halides as promoters

Allyl-indium(III) and -bismuth(III) dihalides, generated by transmetallation of 5-benzyloxy-4-methylpent-2-enyl(tributyl)stannane 1, react with aldehydes with useful levels of 1,5-stereocontrol, a 93:7 ratio of 1,5-epimers in favour of the 1,5-anti-(E)-stereoisomers 7 and 11 typically being obtained using bismuth(III) iodide. The 4-benzyloxypent-2-enylstannane 4 similarly gives the 1,5-syn-(E)-hex-3-enols 13 also with ca. 93:7, stereoselectivity.     

Cerium(III) and neodymium(III) amides derived from a chelating 2-pyridyl amido ligand

Homoleptic Ce(III) and Nd(III) triamides [LnL(3)] [Ln = Ce(1) or Nd(2)] and the heterobimetallic amide-alkoxide derivatives [LnL(2)(mu-OBu(t))2M(tmeda)] [Ln = Ce, M = Na (3); Ln = Nd, M = Na (4); Ln = Nd, M = K (5)] supported by the bulky [N(SiBu(t)Me2)(2-C(5)H(3)N-6-Me)]- ligand (L-) have been successfully synthesized and characterized. Complexes 1-3 and 5 show a high activity toward the ring-opening polymerization of epsilon-caprolactone.     

X-ray diffraction study of scanium(III) and indium(III) tris(dipivaloylmethanates)

Conclusions An x-ray diffraction study was carried out for scandium(III) and indium(III) tris(di pivaloylmethanates). The similarity of the unit cell parameters, the reflection indices and analogous ratios of the intensities of the major lines in the diffraction patterns indicate the isostructural nature of Sc(DPM)₃ and In(DPM)₃ with Fe(DPM)₃.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2098–2099, September, 1987.     

Simultaneous determination of gallium(III) and indium(III) by derivative spectrophotometry

A simple, selective and sensitive derivative spectrophotometric method is proposed for the simultaneous determination of gallium(III) and indium(III) in mixtures using 1-(2-pyridylazo)-2-naphthol in cationic micellar medium, without any prior separation. Beer's law is obeyed between 2.80x10(-1)-3.63 and 4.60x10(-1)-9.20 mug ml(-1) concentration of Ga(III) and In(III) at 550 and 542 nm, the isodifferential points of indium and gallium complexes in the first-order derivative mode, respectively. The proposed method is successfully applied for the determination of gallium and indium in standard reference materials and synthetic binary mixtures with a relative error of +/-2.07 and +/-2.55%, respectively.     

Direct preparation of allylic indium(III) reagents from allylic alcohols via a reductive transmetalation of pi-allylnickel(II) with indium(I) iodide

InI-mediated direct allylation of carbonyl compounds with allylic alcohols proceeded smoothly with catalytic amounts of Ni(acac)(2) and PPh(3) to give the corresponding homoallylic alcohols in high yields. Allylindium compounds were shown to be the real allylating agents in the present system. Substituted allylic alcohols gave branched homoallylic alcohols with syn-selectivity irrespective of the geometry of the starting allylic alcohols, whereas high anti-selectivity was observed when a bulky substituent is present in the allylic alcohols. The outcome of the diastereoselectivity is discussed on the basis of the reaction mechanism, comparing with the corresponding Pd-catalyzed version. Another distinct behavior between the Ni- and Pd-catalyzed allylation was demonstrated in the reaction of hex-1,5-diene-3,4-diol derivatives: the Pd catalyst did not give any coupling product, whereas the Ni-catalyzed InI-mediated reaction with benzaldehyde afforded the 1:1 and 1:2 adduct diols selectively depending on the reaction conditions.     

Direct access to terpyridine-containing polyazamacrocycles as photosensitizing ligands for Eu(III) luminescence in aqueous media

[reaction: see text] The synthesis of new 18-membered hexaazamacrocycles containing a functionalized 2,2':6',2' '-terpyridine moiety as part of the cyclic backbone and three acetate pendant arms is described. The reported synthetic procedure is based on the use of an efficient metal template ion effect which controls the macrocyclization step. This procedure is compatible with some functional groups present in the macrocyclic structure. The photophysical properties of the Eu(III) complexes derived from these ligands were examined in aqueous solutions. Their luminescence lifetimes (tau approximately 1 ms) and quantum yields (13% < Phi < 18%) on one hand, their high kinetic inertness on the other hand, and the presence of additional functionality allowing their covalent conjugation to biomolecules seriously nominate these complexes as very promising candidates for luminescent labeling of biological materials.     

Extraction of indium(III) from sulfate solutions with organophosphorus acids

Extraction of indium(III) from sulfuric acid solutions with di-2-ethylhexyl hydrogen phosphate and isododecylphosphethanic and diisooctylphosphinic acids was studied. The effect of H₂SO₄ and In(III) concentrations in the aqueous phase, type and concentration of the extractant in the organic phase, temperature, and time of phase contact on the extraction of In(III) and impurity metal ions was considered. The In(III) extraction constants were estimated.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 10, 2004, pp. 1625–1629.Original Russian Text Copyright © 2004 by Travkin, Kubasov, Glubokov, Busygina, Kazanbaev, Kozlov.     

Mechanism of indium(III) exchange between NTA and transferrin: a kinetic approach

The equilibria and kinetics for the process of In(3+) exchange between nitrilotriacetic acid (NTA) and bovine serum transferrin (T) have been investigated in aqueous solution containing sodium bicarbonate. The metal exchange equilibria have been measured by difference ultraviolet spectroscopy at 25 degrees C, pH=7.4, and I=0.2 M (NaClO4). The acid dissociation constants of NTA and the binding constants of In(III) to NTA have also been measured. Kinetic experiments revealed that the process of In(3+) uptake by transferrin from [In(NTA)2](3-) is biphasic, the fast phase being completed in a few seconds, the slow phase lasting for hours. The fast phase has been investigated by the stopped-flow method and results in monoexponential kinetics. It involves rapid interaction of the 1:1 complex ML (M=In, L=NTA) with TB (T=transferrin, B=CO3(2-)) to give a quaternary intermediate MLTB which then evolves to an "open" MTB* ternary complex complex with expulsion of L. In turn, this complex interconverts to a "closed", more stable, form MTB. Neither the prevailing complex M2L nor the TB2 form of transferrin are directly involved in the exchange process but act as metal and protein reservoirs. The pH dependence of the reaction has been also investigated. The slow phase has not been investigated in detail; it takes several hours to go to the completeness, its slowness being ascribed to metal redistribution between the C-site and N-site of the protein, and/or metal release from polynuclear In(III) species.     

Lanthanum(III) and praseodymium(III) derivatives with dithiocarbamates derived from alpha-amino acids

Lanthanum(III) and praseodymium(III) complexes with dithiocarbamates have been synthesized by the reactions of lanthanum(III) and praseodymium(III) chloride with barium dithiocarbamate and complexes of type [LnCl(L)H2O]n have been obtained (where Ln=La(III) or Pr(III); L=barium salt of dithiocarbamate derived from glycine, L-leucine, L-valine, DL-alanine). The complexes have been characterized by elemental analysis, molar conductance, electronic absorption and fluorescence, infrared, far infrared, 1H NMR spectral studies. The presence of coordinated water molecule is inferred from thermogravimetric analysis which indicates the loss of one water molecule at 150-170 degrees C. The oscillator strength, Judd-Ofelt intensity parameter, stimulated emission cross-section, etc. have been obtained for different transitions of Pr3+.