The preparation of supported ionic liquids (SILs) and their application in rare metals separation

This review summarizes the preparation methods of support ionic liquids (SILs) and their applications in rare metals separation. The rare metals separation includes the recovery of high value metal ions and the removal of heavy metal ions from wastewater. SILs can be used as a kind of highly efficient multifunctional separation materials. The preparation methods of SILs include chemical immobilization technique in which ILs moieties are supported on solid supports via covalent bonds and physical immobilization techniques in which ILs are immobilized on solid supports via physical method such as simple im- pregnation, sol-gel method. According to the difference of solid supports, this review summarizes the application of polymer supported ionic liquids (P-SILs), silica based material supported ionic liquids (SM-SILs) and membrane supported ionic liq- uids (M-SILs) in rare metals separation. P-SILs and SM-SILs prepared by chemical method with N-methylimidazolium group can be used as highly efficient anion exchangers with high thermal stability and good chemical stability for adsorption of Cr(VI), Re(VII), Ce(IV). P-SILs prepared via simple impregnation afforded IL functionalized solvent impregnated resins (SIRs) which showed high separation efficiency and selectivity in the separation of rare earths(III) (REs(III)). SM-SILs prepared via sol-gel method with IL doped in the support as porogens or extractant show high removal efficiencies and excellent stability for the separation of RE(III), Cr(III) and Cr(VI). M-SILs with IL as plasticizer or carrier show improved stability, high perme- ability coefficient and good selectivity for Cr(VI) transport. Different supports and different supporting methods were suffi- ciently compared. Based on the different practical application, different forms of SILs can be prepared for separation of rare metals with high separation efficiency and selectivity.     

Stability of Ag<Superscript>+</Superscript> Complexes with Cryptand 222 in Ionic Liquids

Stability constants of silver(I) complexes with cryptand 222 were measured in a number of ionic liquids, applying potentiometric titration. The ionic liquids were based on 1-butyl-3-methylimidazolium, 1-ethyl-3-methylimidazolium, 1-butyl-1-methyl-pyrrolidinium and 1-methyl-1-propyl-pyrrolidinium cations, as well as on tetrafluoroborate, triflate and bis(trifluoromethane sulfonyl) imide. The stability constants, expressed in log K scale, were within the broad range of 8.4–17.2. The formation of the Ag⁺222 cryptates was not detected in ionic liquids based on halide anions. Free enthalpy of silver(I) transfer from dimethylsulfoxide as a reference molecular solvent to ionic liquids was calculated applying the cryptate assumption. The results were discussed in terms of the competition between silver(I) complexation by ion forming ionic liquid and its complexation by cryptand 222.in final form: 6 December 2004This revised version was published online in July 2005 with a corrected issue number.     

Synthesis,Characterization and Thermophysical Properties of Three Neoteric Solvents-Ionic Liquids Based on Choline Chloride

The authors prepared,characterized and preliminary studied the properties of some neoteric solvents-ionic liquids based on choline chloride,i.e.,three ionic liquids based on the eutectics of choline chloride（2-hydroxyN,N,N-trimethylethanaminium chloride） with,respectively,urea,malonic acid and citric acid.The obtained mixtures were clear and colorless ionic liquids at room temperature.The thermophysical properties,namely,density,viscosity,and electrical conductivity of these mixtures were investigated as a function of temperature within a range of 298-353 K.Correlations for the temperature dependence of the measured properties were generated and discussed in terms of Arrhenius theory.Finally the electrochemical windows of the eutectic liquids were determined.     

AlCl<Subscript>3</Subscript>/amide ionic liquids for electrodeposition of aluminum

AlCl₃/amide (acetamide, propionamide, butyramide) ionic liquids were used as the electrolytes to study the electrodeposition behavior of aluminum on a tungsten electrode. Cyclic voltammograms on the tungsten electrode indicate that Al(III) ions can be reduced to aluminum only within the molar ratio range of 1.1 to 1.5 and the reduction potentials of Al(III) ions strongly depend on the molar ratio of AlCl₃/amide. Raman spectra results reveal that the electroactive specie of AlCl₃/amide ionic liquids is Al₂Cl₇ ^?. Aluminum coatings were prepared at ?0.25 V (vs. Al/Al³⁺) and at 313 K in AlCl₃/amide ionic liquids with the molar ratio of 1.3. The SEM and cross-sectional SEM images show that all the obtained aluminum films are silver-colored, thick, and adherent. The EDS and XRD analysis confirm that the obtained deposits are pure aluminum. The present results can provide a new route for aluminum electrodeposition under ambient conditions.     

Simultaneous determination of bioactive flavone derivatives in Chinese herb extraction by capillary electrophoresis used different electrolyte systems--borate and ionic liquids

In this paper, novel capillary electrophoresis (CE) methods, which used ionic liquids (1-ethyl-3-methylimidazoium tetrafluoroborate, 1-butyl-3-methylimidazoium tetrafluoroborate), were established to separate and determine some bioactive flavone derivatives in Chinese herb Seriphidium santolinum (Schrenk) Poljak. In order to investigate the traits of ionic liquids in CE, borate was also used as electrolyte to compare with. And the excellence of CE, which used ionic liquids as main running electrolyte and beta-cyclodextrin (beta-CD) as modifier, was illuminated as well. As a result of the study, the difference of ionic liquids and borate in CE was discussed and the advantage of CE, which used ionic liquids as electrolytes for separation, was shown. The analysis was obtained within short time (5-6 min). From the result, it was found that the system, which used ionic liquids, was robust because the joule heating was small. The method of CE, which used ionic liquids, has lower detection limits (0.137-0.642 microg/mL) than that of borate (0.762-1.036 microg/mL). And the CE, which used ionic liquids method, has lower limit of linear range (1.100-2.656 microg/mL), while that of CE, which used borate method, was 2.188-5.313 microg/mL.     

Study on physicochemical properties of ionic liquids based on alanine [Cnmim][Ala] (N=2,3,4,5,6)

According to Fukumoto's method, a new series of ionic liquids (ILs) based on alanine, [Cnmim][Ala] ( n=2,3,4,5,6), which comprise 1-alkyl-3-methylimidazolium cation ([Cnmim](+)) and alanine anions ([Ala] (-)), were prepared and characterized. In terms of standard addition method, the density and surface tension of amino acid ILs [Cnmim][Ala] (1-alkyl-3-methylimidazolium alpha-aminopropionic acid salt) were measured in the temperature range 293.15-343.15+/-0.05 K. The volume and surface properties of the ILs [Cnmim][Ala] were discussed. A new method of determining parachor of ionic compound was proposed and was applied to estimate the physicochemical properties of amino acid ionic liquids (AAILs): molecular volume, surface tension, molar enthalpy of vaporization, and thermal expansion coefficient. In comparison with Deetlefs's method of using neutral parachor contribution, the method proposed in this work makes smaller error in estimating properties of AAILs.     

Room Temperature Ionic Liquids (RTILs) and Multiwalled Carbon Nanotubes (MWCNTs) as Modifiers for Improvement of Carbon Paste Ion Selective Electrode Response; A Comparison Study with PVC Membrane

Room temperature ionic liquids (RTILs), 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmim]BF₄, and multiwalled carbon nanotubes (MWCNTs) were used for improvement of a praseodymium carbon paste ion selective sensor response. [bmim]BF₄ can be a better binder than mineral oils. MWCNTs have a good conductivity which helps the transduction of the signal in carbon paste electrode. The characteristics of these electrodes as potentiometric sensors were evaluated and compared with PVC membrane sensor. The results indicate that potentiometric sensor constructed with ionic liquid shows an increase in performance in terms of Nernstian slope, selectivity, response time, and response stability compared to Pr(III) PVC membrane sensor.     

Studies on the thermodynamic properties of new ionic liquids: 1-Methyl-3-pentylimidazolium salts containing metal of group III

This paper reports that new ionic liquids (ILs) have been prepared by directly mixing the chloride of group III and 1-methyl-3-pentylimidazolium chloride (PMIC) with molar ratio 1/1 under dry argon atmosphere. The densities and surface tension of these ILs were determined at temperature range of 273.15 K to 343.15 ± 0.1 K. The properties for the ionic liquids were discussed by interstice model and Glasser’s theory.     

Ultrafast dynamics of pyrrolidinium cation ionic liquids

We have investigated the ultrafast molecular dynamics of five pyrrolidinium cation room temperature ionic liquids using femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy. The ionic liquids studied are N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide P14+/NTf2-), N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide P1EOE+/NTf2-), N-ethoxyethyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide P1EOE+/NTf2-), N-ethoxyethyl-N-methylpyrrolidinium bromide P1EOE+, and N-ethoxyethyl-N-methylpyrrolidinium dicyanoamide P1EOE+/DCA-). For comparing dynamics among the five ionic liquids, we categorize the ionic liquids into two groups. One group of liquids comprises the three pyrrolidinium cations P14+, P1EOM+, and P1EOE+ paired with the NTf2- anion. The other group of liquids consists of the P1EOE+ cation paired with each of the three anions NTf2-, Br-, and DCA-. The overdamped relaxation for time scales longer than 2 ps has been fit by a triexponential function for each of the five pyrrolidinium ionic liquids. The fast ( approximately 2 ps) and intermediate (approximately 20 ps) relaxation time constants vary little among these five ionic liquids. However, the slow relaxation time constant correlates with the viscosity. Thus, the Kerr spectra in the range from 0 to 750 cm(-1) are quite similar for the group of three pyrrolidinium ionic liquids paired with the NTf2- anion. The intermolecular vibrational line shapes between 0 and 150 cm(-1) are fit to a multimode Brownian oscillator model; adequate fits required at least three modes to be included in the line shape.     

Mixed valence compounds as probes to determine the polarity of 1-butyl-3-methylimadazolium ionic liquids

Radical cations and dications of three bishydrazines belonging to the Class II mixed valence compounds have been generated, either spontaneously or by oxidation with AgSbF6, in two 1-butyl-3-methylimidazolium (4+) ionic liquids having BF4(-) and PF6(-) as counterions. The optical spectra of these intermediates have allowed evaluation of Marcus' reorganization energy lambda(s), a parameter that is directly proportional to the solvent polarity. Remarkable differences in lambda(s), as large as 600 cm(-1), have been observed as a function of the counterion, with these data providing support for the observed differences between both ionic liquids (4(+)BF4(-) and 4(+)PF6(-)) in catalysis. However, in terms of polarity, the lambda(s) values rank the hydrophilic 4(+)BF4(-) as being similar to dimethyl sulfoxide and dimethylformamide, while the polarity of hydrophobic 4(+)PF6(-) is analogous to acetonitrile. Overall, our results indicate that ionic liquids are not exceptional liquids in terms of polarity.     

Physicochemical properties and structures of room temperature ionic liquids. 2. Variation of alkyl chain length in imidazolium cation

The alkyl chain length of 1-alkyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide ([Rmim][(CF(3)SO(2))(2)N], R = methyl (m), ethyl (e), butyl (b), hexyl (C(6)), and octyl (C(8))) was varied to prepare a series of room-temperature ionic liquids (RTILs), and the thermal behavior, density, viscosity, self-diffusion coefficients of the cation and anion, and ionic conductivity were measured over a wide temperature range. The self-diffusion coefficient, viscosity, ionic conductivity, and molar conductivity change with temperature following the Vogel-Fulcher-Tamman equation, and the density shows a linear decrease. The pulsed-field-gradient spin-echo NMR method reveals a higher self-diffusion coefficient for the cation compared to that for the anion over a wide temperature range, even if the cationic radius is larger than that of the anion. The summation of the cationic and anionic diffusion coefficients for the RTILs follows the order [emim][(CF(3)SO(2))(2)N] > [mmim][(CF(3)SO(2))(2)N] > [bmim][(CF(3)SO(2))(2)N] > [C(6)mim][(CF(3)SO(2))(2)N] > [C(8)mim][(CF(3)SO(2))(2)N], which greatly contrasts to the viscosity data. The ratio of molar conductivity obtained from impedance measurements to that calculated by the ionic diffusivity using the Nernst-Einstein equation quantifies the active ions contributing to ionic conduction in the diffusion components, in other words, ionicity of the ionic liquids. The ratio decreases with increasing number of carbon atoms in the alkyl chain. Finally, a balance between the electrostatic and induction forces has been discussed in terms of the main contribution factor in determining the physicochemical properties.     

离子液体中聚碳酸酯光盘的降解-碳酸二苯酯的回收

利用多种氯化铝离子液体和氯化铝离子液体/无机酸体系为反应介质,考察了 较温和条件下废旧聚碳酸酯光盘的降解行为。实验结果表明,在酸性的甲基丁基咪 唑盐的氯化铝离子液体/硫酸介质中,常压,100 ℃条件下,可将废旧聚碳酸酯光 盘有效地降解,主要产物为碳酸二苯酯。反应72 h后,收率为63%。     

Lanthanide ion extraction by trifluoromethyl-1,3-diketonate-functionalised ionic liquids adsorbed on silica

While acetylacetone (acacH) derivatives are, upon deprotonation, ubiquitous ligands in coordination chemistry, their potential to form stable ionic liquids has not been studied so far. Here we describe a straightforward synthesis of novel trifluoroacetylacetone-functionalised imidazolium salts. These salts are built from an imidazolium ring substituted on one side with a flexible chain of fixed length carrying a terminal acacH group and on the opposite side a paraffin chain of various lengths. By changing the length of these flexible chains (n=4, 8, 12) and the nature of the counter-anions (PF(6)(-), BF(4)(-), NTf(2)(-)), room-temperature ionic liquids were produced. Their application for the extraction of lanthanide salts (Eu, Tb) from dilute aqueous solution has been investigated. The presence of a strong UV absorber (imidazolium ring, λ(abs)=290 nm) allows photosensitisation of the Eu(III) and Tb(III) luminescence by efficient energy transfer, and thus extraction of these two lanthanides can be followed by fluorescence techniques. It appears that loading of the ionic liquids onto silica particles pre-treated with a dilute aqueous solution of NaOH is the most efficient way to obtain fast and almost quantitative (>99.9%) extraction of the metal ions as their diketonato complexes. The procedure is reproducible and the loaded SiO(2) particles can be simply treated with acid to strip the metal ions and regenerate the adsorbed (protonated) extractant.     

Picosecond time-resolved fluorescence study on solute-solvent interaction of 2-aminoquinoline in room-temperature ionic liquids: aromaticity of imidazolium-based ionic liquids

Time-resolved fluorescence spectra and fluorescence anisotropy decay of 2-aminoquinoline (2AQ) have been measured in eight room-temperature ionic liquids, including five imidazolium-based aromatic ionic liquids and three nonaromatic ionic liquids. The same experiments have also been carried out in several ordinary molecular liquids for comparison. The observed time-resolved fluorescence spectra indicate the formation of pi-pi aromatic complexes of 2AQ in some of the aromatic ionic liquids but not in the nonaromatic ionic liquids. The fluorescence anisotropy decay data show unusually slow rotational diffusion of 2AQ in the aromatic ionic liquids, suggesting the formation of solute-solvent complexes. The probe 2AQ molecule is likely to be incorporated in the possible local structure of ionic liquids, and hence the anisotropy decays only through the rotation of the whole local structure, making the apparent rotational diffusion of 2AQ slow. The rotational diffusion time decreases rapidly by adding a small amount of acetonitrile to the solution. This observation is interpreted in terms of the local structure formation in the aromatic ionic liquids and its destruction by acetonitrile. No unusual behavior upon addition of acetonitrile has been found for the nonaromatic ionic liquids. It is argued that the aromaticity of the imidazolium cation plays a key role in the local structure formation in imidazolium-based ionic liquids.     

Understanding chemical reaction mechanisms in ionic liquids: successes and challenges

The focus of this article is an examination of chemical reaction mechanisms in ionic liquids. These mechanisms are compared with those pertaining to the same reactions carried out in conventional solvents. In cases where the mechanisms differ, attempts to provide an explanation in terms of the chemical and physicochemical properties of the reactants and of the components of the ionic liquids are described. A wide range of reactions from different branches of chemistry has been selected for this purpose. A sufficient background for student readers has been included. This tutorial review should also be of interest to kineticists, and to both new and experienced investigators in the ionic liquids field.     

负载型氨基功能化离子液体吸附CO2性能差异研究

以Al₂O₃、SiO₂和活性炭为载体,采用浸渍法制备了负载型离子液体（[NH₂p-mim]X:X= Br-,PF₆-,BF₄-,NTf₂-）CO₂吸附剂,利用红外光谱（FT-IR）、元素分析(EA)、热重差热分析（TG-DTA）等技术对负载型离子     

Prediction of macroscopic properties of protic ionic liquids by ab initio calculations

We have systematically investigated combinations of anions and cations in a number of protic ionic liquids based on alkylamines and used ab initio methods to gain insight into the parameters determining their liquid range and their conductivity. A simple, almost linear, relation of the experimentally determined melting temperature with the calculated volume of the anion forming the ionic liquid is found, whereas the dependence of the melting temperature with increasing cation volume goes through a minimum for relatively short side chain length. On the basis of the present results, we propose a strategy to predict the nature of protic ionic liquids in terms of low vapor pressure and conductivity. Comparisons with previously reported strategies for prediction of melting temperatures for aprotic ionic liquids are also made.     

Transport of iron ions from chloride solutions using cellulose triacetate matrix inclusion membranes with an ionic liquid carrier

In this study, liquid membranes denoted as polymer inclusion membranes (PIMs) consisting of cellulose triacetate (CTA) as a polymer matrix, o-nitrophenyl octyl ether (NPOE) as a plasticiser and phosphonium ionic liquids, trihexyltetradecylphosphonium chloride (Cyphos® IL 101) and trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl)phosphinate (Cyphos® IL 104), as carriers of metal ions were developed. The transport of Fe(II) and Fe(III) from chloride aqueous solutions across PIMs was investigated. It is shown that these phosphonium ionic liquids are effective carriers of Fe(III) ions through PIMs. While, for Fe(II), the highest value of extraction efficiency and recovery factor after 72 h does not exceed 40%, by contrast, the values of these parameters for Fe(III) transport ranged from 60% to almost 100%. Additionally, the results indicate the transport rate to be strongly influenced by the amount of carrier in the membrane. The highest initial flux of Fe(III) and permeability coefficient are noted for the membrane containing 40 mass % Cyphos® IL 101. However, it is shown that the transport of Fe(III) increases as the carrier content is increased then decreases at a content of the carrier equal to 40 mass %. It appears that the Fe(III)-carrier complex decomposes with difficulty at the interface of the membrane-receiving phase, hence leading to low values of recovery factor Fe(III).     

Intermolecular vibrations and fast relaxations in supercooled ionic liquids

Short-time dynamics of ionic liquids has been investigated by low-frequency Raman spectroscopy (4 < ω < 100 cm(-1)) within the supercooled liquid range. Raman spectra are reported for ionic liquids with the same anion, bis(trifluoromethylsulfonyl)imide, and different cations: 1-butyl-3-methylimidazolium, 1-hexyl-3-methylimidazolium, 1-butyl-1-methylpiperidinium, trimethylbutylammonium, and tributylmethylammonium. It is shown that low-frequency Raman spectroscopy provides similar results as optical Kerr effect (OKE) spectroscopy, which has been used to study intermolecular vibrations in ionic liquids. The comparison of ionic liquids containing aromatic and non-aromatic cations identifies the characteristic feature in Raman spectra usually assigned to librational motion of the imidazolium ring. The strength of the fast relaxations (quasi-elastic scattering, QES) and the intermolecular vibrational contribution (boson peak) of ionic liquids with non-aromatic cations are significantly lower than imidazolium ionic liquids. A correlation length assigned to the boson peak vibrations was estimated from the frequency of the maximum of the boson peak and experimental data of sound velocity. The correlation length related to the boson peak (～19 A?) does not change with the length of the alkyl chain in imidazolium cations, in contrast to the position of the first-sharp diffraction peak observed in neutron and X-ray scattering measurements of ionic liquids. The rate of change of the QES intensity in the supercooled liquid range is compared with data of excess entropy, free volume, and mean-squared displacement recently reported for ionic liquids. The temperature dependence of the QES intensity in ionic liquids illustrates relationships between short-time dynamics and long-time structural relaxation that have been proposed for glass-forming liquids.     

离子液体在CO_2捕集中的应用进展

离子液体具有蒸汽压极低、热稳定性好、热容低和可以根据目标需求进行设计等特性,能克服传统CO2捕集工艺的诸多不足,因而成为目前CO2捕集溶剂的研究热点。本文主要综述了普通离子液体、功能化离子液体、支撑型离子液体膜、聚合型离子液体和离子液体复配溶液在CO2捕集方面的应用研究进展,评述了各种方法的优势和缺点,并在此基础上提出...