高效液相手性固定相法拆分1-苯乙烯基-3-己基丙炔醇

以纤维素衍生物为手性固定相,建立药物中间体1-苯乙烯基-3-己基丙炔醇对映体的HPLC手性分析方法。以正己烷与乙醇或异丙醇为流动相,在Chiralcel OD-H手性固定相上对1-苯乙烯基-3-己基丙炔醇进行了拆分,并考察了流动相组成、流速和柱温对该对映体分离的影响,获得较优分析条件,分析时间在15 min内,分离度大于1.5。结果表明,1-苯乙烯基-3-己基丙炔醇对映体在正己烷-异丙醇(体积比90:10)为流动相、流速为1.0 m L/min、柱温为25℃时,分离效果最佳。本方法可用于1-苯乙烯基-3-己基丙炔醇对映体的质量控制。     

钯催化的脱羧基烷基化反应

钯催化的脱羧基烷基化反应是构建碳碳键特别是手性碳的有效手段,其催化活性高,反应条件温和,对映选择性好.近年来该领域取得了长足的进步.介绍了5年来钯催化的脱羧基烷基化反应,主要是钯催化的对映选择性Tsuji反应及其在天然产物合成中的应用.     

石墨烯基环糊精传感器的构建及对组氨酸对映体的电位识别

以具备手性识别作用的环糊精聚合物为手性选择剂, 以石墨烯为手性放大材料, 通过层层修饰的方法构建了石墨烯基环糊精聚合膜电位识别传感器. 由所构建的传感器测得的组氨酸对映体的氧化峰电位存在明显的差异, 电位差值近100 mV, 且不同比例的组氨酸对映体混合溶液的氧化峰电位值与对映体过量值呈现良好的线性关系. 据此, 建立了一种通过电位同时识别组氨酸对映体两组分的新方法.     

有机催化异氰基乙酸甲酯与芳香醛亚胺的不对称Mannich反应

将金鸡纳生物碱衍生物用于有机催化异氰基乙酸甲酯与芳香醛亚胺的不对称Mannich反应。 考察溶剂、温度及催化剂用量对反应催化性能的影响。 结果表明,最佳催化条件为摩尔分数10%催化剂1b,甲苯为溶剂,4A型分子筛,室温反应。 产物产率为55%~80%,对映选择性最高达82%ee(对映体过量值)和非对映选择性(dr)达到>99：1。     

α-萘基缩水甘油醚对映体的毛细管区带电泳手性拆分

建立了毛细管区带电泳手性拆分α-萘基缩水甘油醚对映体的方法.考察了不同手性拆分试剂对手性选择性的影响,实验结果表明,20 mmol/L H3PO4-三乙醇胺(pH 2.5)、2%(w/V)HS-β-CD、毛细管温度20 ℃、运行电压-18 kV为最佳分离条件,在该分离条件下α-萘基缩水甘油醚对映体实现基线分离.方法简便、准确,可用于α-萘基缩水甘油醚的手性拆分和对映体过量值(ee,%)测定.     

2,2,2-三氟-1-(9-蒽基)乙醇对映体在涂敷型手性固定相上的拆分

用高效液相色谱法在涂敷１５％（Ｗｔ）三苯基氨基甲酸纤维素醌手性柱上,考察了洗脱液正己烷／醇（Ｖ／Ｖ）中醇对分离－２,２,２－三氟－１（９－蒽基）乙醇对映体的影响,初步认为,在对映体分离过程中,洗脱液中醇与手性固定相的ＮＨ和Ｃ＝Ｏ形成氢键作用,此过程与对映体和手性固定相的ＮＨ和Ｃ＝Ｏ所形成氢键作用相竞争;洗脱液中醇的结构不同之所以影响对映体的分离效果,还与洗脱中醇改变固定相中手性空穴的立体环境有关,     

新手性双-(三氟甲磺酰)亚胺基硫代缩酮基硅烷的合成及其不对称催化Diels-Alder反应

合成了数个新手性双-(三氟甲磺酰)亚胺基二硫代缩酮基硅路易斯酸2～4, 并研究了它们对环戊二烯和丙烯酸衍生物11a～11c的Diels-Alder反应的催化活性. 结果表明催化剂活性高, 环加成反应的产率高达89%～96%, 并且获得较高的非对映选择性和中等对映选择性, 当催化剂为2b时, 反应的对映选择性达到最高, 为48% ee.     

用于芳香胺和醇NMR对映体检测的松香基膦试剂的合成

以松香为原料通过三步反应高产率合成手性二醇3和手性单醇6,将它们用作手性助剂现场制备有机膦衍生试剂,分别对单官能团手性底物(单胺、单醇)和双官能团底物(双胺、双醇及氨基醇)进行衍生,通过31P NMR测定,其芳基底物非对映体衍生物的膦化学位移差异值(Δδp)在3.08～0.10之间,均能够在测定条件下实现对映体峰的基线分离.用于α-萘乙胺和1,1’-联二萘酚(BINOL)样品对映体过量值测定,相对误差小于±2%.     

二(2-乙基己基)磷酸与酒石酸衍生物复合萃取拆分扁桃酸外消旋体

本文研究了扁桃酸对映体在含二(2-乙基己基)磷酸(D2EHPA)与酒石酸衍生物复合手性选择剂的正辛醇-水两相体系中的萃取分配行为,考察了酒石酸衍生物的种类和初始浓度、D2EHPA的初始浓度、扁桃酸的初始浓度、萃取温度对分配系数和分离因子的影响.结果显示,复合手性选择剂能提高分配系数和分离因子,D2EHPA与D-酒石酸衍生物的复合手性选择剂与L-扁桃酸对映体比与D-扁桃酸对映体形成更稳定的非对映体复合物;且D2EHPA与二对甲基苯甲酰酒石酸(DTTA)的复合手性选择剂的手性选择性大于D2EHPA与二苯甲酰酒石酸(DBTA)的复合手性选择剂;同时,扁桃酸的初始浓度、萃取温度对分配系数和分离因子的影响较大.     

毛细管电泳手性选择剂去硫酸基硫酸软骨素C的研究开发及新药西尼地平对映体的拆分

研究开发了一种新型的毛细管电泳多糖手性选择剂去硫酸基硫酸软骨素C,并用于二氢吡啶类药物对映体的分离。建立了新药西尼地平对映体的拆分方法,同时考察了背景电解质pH值、手性添加剂浓度、工作电压等因素对手性分离的影响。优化的背景电解质pH值 为2.50、手性添加剂的质量浓度为30 g/L,工作电压为10 kV。以去硫酸基硫酸软骨素C为毛细管电泳手性选择剂拆分新药西尼地平对映体,操作简单方便,西尼地平两对映体得到了基线分离,分离度达2.01。     

Enantioselective hydrogenation of olefins with planar chiral iridium ferrocenyloxazolinylphosphine complexes

Chiral iridium Fc-PHOX complexes were readily prepared from Fc-PHOX, [Ir(cod)Cl]₂ and NaBArF (or NaPF₆) in high yields. They were applied as catalysts in the enantioselective hydrogenation of olefins to afford the corresponding products with high conversions and good enantioselectivities (up to 99% ee).     

Stereoselective reactions of acyclic allylic phosphates with organocopper reagents

A series of acyclic allylic alcohols of general structure R(1)CH==CHCH(OH)R(2) were resolved by Sharpless kinetic resolution. The hydroxyl groups of these enantiomerically enriched alcohols were derivatized to diethyl phosphates, and the derivatives were reacted with organocopper reagents. Cleanest substitution reactions were observed with reagents R(3)(2)CuCNLi(2). With R(1) = Me and R(3) = n-Bu, the size of R(2) affected both the regioselectivity and stereoselectivity of the displacement. Larger R(2) groups gave higher regio- and stereoselectivities: with R(2) = 3-pentyl, >98% S(N)2' regioselectivity and >98% anti stereoselectivity were observed. Bn(2)CuCNLi(2) gave stereoselectivities comparable to those observed with n-Bu(2)CuCNLi(2) but t-Bu(2)CuCNLi(2) exhibited much lower diastereofacial preference.     

Film growth precursor development for metal nitrides. Synthesis, structure, and volatility of molybdenum(VI) and tungsten(VI) complexes containing bis(imido)metal fragments and various nitrogen donor ligands

The molybdenum and tungsten complexes W2(NtBu)4(pz)4(pzH).(C6H14)0.5 (pz = pyrazolate), M(NtBu)2(Me2pz)2(Me2pzH)2 (Me2pz = 3,5-dimethylpyrazolate), M(NtBu)2(tBu2pz)2 (tBu2pz = 3,5-di-tert-butylpyrazolate), M2(NtBu)4(Me2pz)2Cl2, W(NtBu)2(C2N3(iPr)2)2py2, M(NtBu)2-(CN4CF3)2py2, and W(NtBu)2(PhNNNPh)2 were prepared by various synthetic routes from the starting materials Mo(NtBu)2Cl2, W(NtBu)2(NHtBu)2, and W(NtBu)2Cl2py2. These new complexes were characterized by spectral and analytical methods and by X-ray crystal structure determinations. The volatilities and thermal stabilities were evaluated to determine the potential of the new complexes for use in thin film growth of metal nitride films. Mo(NtBu)2(tBu2pz)2 and W(NtBu)2(tBu2pz)2 were found to have the optimum combination of volatility and thermal stability for application in atomic layer deposition thin film growth procedures.     

N,N'-ethylenebis(pyridoxylideneiminato) and N,N'-ethylenebis(pyridoxylaminato): synthesis, characterization, potentiometric, spectroscopic, and DFT studies of their vanadium(IV) and vanadium(V) complexes

The Schiff base N,N'-ethylenebis(pyridoxylideneiminato) (H(2)pyr(2)en, 1) was synthesized by reaction of pyridoxal with ethylenediamine; reduction of H(2)pyr(2)en with NaBH(4) yielded the reduced Schiff base N,N'-ethylenebis(pyridoxylaminato) (H(2)Rpyr(2)en, 2); their crystal structures were determined by X-ray diffraction. The totally protonated forms of 1 and 2 correspond to H(6)L(4+), and all protonation constants were determined by pH-potentiometric and (1)H NMR titrations. Several vanadium(IV) and vanadium(V) complexes of these and other related ligands were prepared and characterized in solution and in the solid state. The X-ray crystal structure of [V(V)O(2)(HRpyr(2)en)] shows the metal in a distorted octahedral geometry, with the ligand coordinated through the N-amine and O-phenolato moieties, with one of the pyridine-N atoms protonated. Crystals of [(V(V)O(2))(2)(pyren)(2)].2 H(2)O were obtained from solutions containing H(2)pyr(2)en and oxovanadium(IV), where Hpyren is the "half" Schiff base of pyridoxal and ethylenediamine. The complexation of V(IV)O(2+) and V(V)O(2) (+) with H(2)pyr(2)en, H(2)Rpyr(2)en and pyridoxamine in aqueous solution were studied by pH-potentiometry, UV/Vis absorption spectrophotometry, as well as by EPR spectroscopy for the V(IV)O systems and (1)H and (51)V NMR spectroscopy for the V(V)O(2) systems. Very significant differences in the metal-binding abilities of the ligands were found. Both 1 and 2 act as tetradentate ligands. H(2)Rpyr(2)en is stable to hydrolysis and several isomers form in solution, namely cis-trans type complexes with V(IV)O, and alpha-cis- and beta-cis-type complexes with V(V)O(2). The pyridinium-N atoms of the pyridoxal rings do not take part in the coordination but are involved in acid-base reactions that affect the number, type, and relative amount of the isomers of the V(IV)O-H(2)Rpyr(2)en and V(V)O(2)-H(2)Rpyr(2)en complexes present in solution. DFT calculations were carried out and support the formation and identification of the isomers detected by EPR or NMR spectroscopy, and the strong equatorial and axial binding of the O-phenolato in V(IV)O and V(V)O(2) complexes. Moreover, the DFT calculations done for the [V(IV)O(H(2)Rpyr(2)en)] system indicate that for almost all complexes the presence of a sixth equatorial or axial H(2)O ligand leads to much more stable compounds.     

Robust chiral zirconium alkoxide initiators for the room-temperature stereoselective ring-opening polymerisation of rac-lactide

Chiral Schiff bases (1H to 4H) and a series of their Group 4 metal alkoxide complexes [(R-1)2Ti(O(i)Pr)2, (R-2)2Ti(O(i)Pr)2, (R-1)(2)Zr(O(i)Pr)2, (R-2)2Zr(O(i)Pr)2, (R-3)2Zr(O(i)Pr)2, (R-4)2Zr(O(i)Pr)2, (S-1)2Zr(O(i)Pr)2 and (rac-1)2Zr(O(i)Pr)2] have been prepared and characterised by 1H, and 13C NMR spectroscopy. In solution, both Lambda and Delta isomers were observed, suggesting a low degree of chiral induction from the ligand. One ligand (R-4H) and three complexes [Delta-(R,R-2)2Ti(O(i)Pr)2, Lambda-(R,R-1)2Zr(O(i)Pr)2 and Delta-(R,R-3)2Zr(O(i)Pr)2] have also been characterised by single crystal X-ray diffraction. All complexes were found to have a pseudo-octahedral alpha-cis geometry. The complexes were tested as initiators for the ring-opening polymerisation of rac-lactide in solution and in the melt. The titanium complexes are inactive in solution and afford atactic polylactide in the melt. Zr(iv) complexes afford heterotactically enriched polylactide both in toluene solution (at 20 degrees C and 80 degrees C) and in the melt. Polymerisations were generally found to be well-controlled, giving predictable molecular weights and low molecular weight distributions. Ligand variation (substituents and/or chirality) has little effect on either the activity or selectivity of initiators. Zirconium initiators were found to be unusually robust as they were able to maintain well-controlled polymerisation following addition of water to reactions in solution and when using unpurified monomer for reactions in the melt.     

Galactose oxidase models: tuning the properties of CuII-phenoxyl radicals

Four tripodal ligands with an N(3)O coordination sphere were synthesized: (2-hydroxy-3-tert-butyl-5-nitrobenzyl)bis(2-pyridylmethyl)amine (LNO(2)H), (2-hydroxy-3-tert-butyl-5- fluorobenzyl)bis(2-pyridylmethyl)amine (LFH), (2-hydroxy-3,5-di-tert-butylbenzyl)bis(2-pyridylmethyl)amine (LtBuH) and (2-hydroxy-3-tert-butyl-5-methoxybenzyl)bis(2-pyridylmethyl)amine (LOMeH). Their square-pyramidal copper(II) complexes, in which the phenol subunit occupies an axial position, were prepared and characterized by X-ray crystallography and UV/Vis and EPR spectroscopy. The phenolate moieties of the copper(II) complexes of LtBuH and LOMeH were electrochemically oxidized to phenoxyl radicals. These complexes are EPR-active (S=1), highly stable (k(decay)=0.008 min(-1) for [Cu(II)(LOMe(.))(CH(3)CN)](2+)) and stoichiometrically oxidise benzyl alcohol. Two additional tripodal ligands providing an N(2)O(2) coordination sphere were also studied: (2-pyridylmethyl)(2-hydroxy-3-tert-butyl-5-methoxybenzyl)(2-hydroxy-3-tert-butyl-5-nitrobenzyl)amine (L'OMeNO(2)H(2)) and (2-pyridylmethyl)bis(2-hydroxy-3-tert-butyl-5- methoxy)benzylamine (L'OMe(2)H(2)). Their copper(II) complexes were isolated as dimers ([Cu(2II)(L'OMe(2))(2)], [Cu(2II)(L'OMeNO(2))(2)]) that are converted to monomers on addition of pyridine. The complexes were investigated by X-ray crystallography and UV/Vis and EPR spectroscopy. Their one-electron electrochemical oxidation leads to copper(II)-phenoxyl systems that are less stable than those of the N(3)O complexes. The N(2)O(2) complexes are more reactive than the N(3)O analogues: they aerobically oxidize benzyl alcohol to benzaldehyde at a higher rate, as well as ethanol to acetaldehyde (40-80 turnovers).     

Molybdenum disulfide nanowires and nanoribbons by electrochemical/chemical synthesis

Molybdenum disulfide nanowires and nanoribbons have been synthesized by a two-step, electrochemical/chemical synthetic method. In the first step, MoO(x) wires (a mixture of MoO(2) and MoO(3)) were electrodeposited size-selectively by electrochemical step-edge decoration on a highly oriented pyrolytic graphite (HOPG) surface. Then, MoO(x) precursor wires were converted to MoS(2) by exposure to H(2)S either at 500-700 degrees C, producing "low-temperature" or LT MoS(2) nanowires that were predominantly 2H phase, or above 800 degrees C producing "high-temperature" or HT MoS(2) ribbons that were predominantly 3R phase. The majority of these MoS(2) wires and ribbons were more than 50 microm in length and were organized into parallel arrays containing hundreds of wires or ribbons. MoS(2) nanostructures were characterized by X-ray photoelectron spectroscopy, scanning and transmission electron microscopy, selected area electron diffraction, X-ray diffraction, UV-visible absorption spectrometry, and Raman spectroscopy. HT and LT MoS(2) nanowires were structurally distinct: LT MoS(2) wires were hemicylindrical in shape and nearly identical in diameter to the MoO(x) precursor wires from which they were derived. LT MoS(2) wires were polycrystalline, and the internal structure consisted of many interwoven, multilayer strands of MoS(2); HT MoS(2) ribbons were 50-800 nm in width and 3-100 nm thick, composed of planar crystallites of 3R-MoS(2). These layers grew in van der Waals contact with the HOPG surface so that the c-axis of the 3R-MoS(2) unit cell was oriented perpendicular to the plane of the graphite surface. Arrays of MoS(2) wires and ribbons could be cleanly separated from the HOPG surface and transferred to glass for electrical and optical characterization. Optical absorption measurements of HT MoS(2) nanoribbons reveal a direct gap near 1.95 eV and two exciton peaks, A1 and B1, characteristic of 3R-MoS(2). These exciton peaks shifted to higher energy by up to 80 meV as the wire thickness was decreased to 7 nm (eleven MoS(2) layers). The energy shifts were proportional to 1/ L( parallel)(2), and the effective masses were calculated. Current versus voltage curves for both LT and HT MoS(2) nanostructures were probed as a function of temperature from -33 degrees C to 47 degrees C. Conduction was ohmic and mainly governed by the grain boundaries residing along the wires. The thermal activation barrier was found to be related to the degree of order of the crystallites and can be tuned from 126 meV for LT nanowires to 26 meV for HT nanoribbons.     

Synthesis and Characterization of Ferrocene Derived Cyclic Carbaphosphazenes

Dialkylamino substituted cyclic carbaphosphazenes, (R 2 NCN) 2 (NPCl 2 ) were prepared and reacted with the ferrocene derived hydroxymethyl phosphine sulfide FcCH(CH 3 )P(S)(CH 2 OH) 2 after dilithiation to yield a series of new spirocyclic derivatives of cyclic carbaphosphazenes having ferrocenyl pendant groups. To confirm the formation of six membered spirocycles and to compare their spectral features, transesterification reactions of FcCH(CH 3 )P(S)(CH 2 OH) 2 also were carried out with P(NR 2 ) 3 , yielding the six membered heterocycles FcCH 2 P(S)(CH 2 O) 2 PNR 2 (R = Me, Et). The compounds were characterized by 1 H, 31 P, 13 C NMR, mass spectra, and elemental analysis.     

Rotational analysis and deperturbation of the A2Π → X2Σ+ and B'2Σ+ → X2Σ+ emission spectra of MgH

Deperturbation analysis of the A(2)Π → X(2)Σ(+) and B(')(2)Σ(+) → X(2)Σ(+) emission spectra of (24)MgH is reported. Spectroscopic data for the v = 0 to 3 levels of the A (2)Π state and the v = 0 to 4 levels of the B'(2)Σ(+) state were fitted together using a single Hamiltonian matrix that includes (2)Π and (2)Σ(+) matrix elements, as well as off-diagonal elements coupling several vibrational levels of the two states. A Dunham-type fit was performed and the resulting Y(l,0) and Y(l,1) coefficients were used to generate Rydberg-Klein-Rees (RKR) potential curves for the A (2)Π and the B'(2)Σ(+) states. Vibrational overlap integrals were computed from the RKR potentials, and the off-diagonal matrix elements coupling the electronic wavefunctions (a(+) and b) were determined. Zero point dissociation energies (D(0)) of the A(2)Π and B'(2)Σ(+) states of (24)MgH were determined to be 12,957.5 ± 0.5 and 10,133.6 ± 0.5 cm(-1), respectively. Using the Y(0,1) coefficients, the equilibrium internuclear distances (r(e)) of the A(2)Π and B'(2)Σ(+) states were determined to be 1.67827(1) ? and 2.59404(4) A?, respectively.     

Synthesis and reactivity of the phosphinoboranes R2PB(C6F5)2

The phosphinoboranes [R(2)PB(C(6)F(5))(2)](2) (R = Et 1, Ph 2) and R(2)PB(C(6)F(5))(2) (R = tBu 3, Cy 4, Mes 5) were synthesized from the reaction of (C(6)F(5))(2)BCl and the corresponding lithium phosphide. The relationships between B-P distance, P pyramidality, and the extent of BP multiple bonding were further explored computationally. Natural Bond Order (NBO) analyses of 3 and 4 showed that the π-bonding highest occupied molecular orbitals (HOMOs) were highly polarized. In addition the Lewis acid-base adducts, R(2)(H)P·B(H)(C(6)F(5))(2) (R = Et 6; Ph 7; tBu 8; Cy 9; Mes 10) were prepared via the reaction of the phosphines R(2)PH with the borane HB(C(6)F(5))(2). Compounds 1 and 2 showed no signs of reaction with H(2); however, reaction of compounds 3 and 4 with H(2) was observed to give 8 and 9. In a related set of reactions compounds 3 and 4 were reacted with H(3)NBH(3) or Me(2)(H)NBH(3) also led to the generation of 8 and 9, respectively. The reaction profile of the reaction of (CF(3))(2)BPR(2) with H(2) was examined computationally and shown to be exothermic. Efforts to effect the reverse reaction, that is, dehydrogenation of adducts 6-10 were unsuccessful. Compound 4 was also shown to react with 4-tert-butylpyridine to give Cy(2)PB(C(6)F(5))(2)(4-tBuC(5)H(4)N) 11 while reactions of 3 and 4 with the Lewis acid BCl(3) gave the dimers (R(2)PBCl(2))(2) (R = tBu 12, Cy 13) and the byproduct ClB(C(6)F(5))(2).