Rhodium-catalyzed dehydrocoupling of the sterically encumbered phosphine-borane adduct tBu(2)PH.BH(3): synthesis of the linear dimers tBu(2)PH-BH(2)-tBu(2)P-BH(3) and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl

The dehydrocoupling of the sterically hindered phosphine-borane adduct tBu(2)PH.BH(3) above 140 degrees C is catalyzed by the rhodium complexes [Rh(1,5-cod)(2)][OTf] or Rh(6)(CO)(16) to give the four-membered chain tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), which was isolated in 60% yield and characterized by multinuclear NMR spectroscopy, mass spectrometry, and elemental analysis. Thermolysis of 1 in the temperature range 175-180 degrees C led to partial decomposition and the formation of tBu(2)PH.BH(3). When the dehydrocoupling of tBu(2)PH.BH(3) was performed in the presence of [[Rh(mu-Cl)(1,5-cod)](2)] or RhCl(3) hydrate, the chlorinated compound tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) was formed which could not be obtained free of 1. The molecular structures of tBu(2)PH.BH(3), tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) together with 1 were determined by single-crystal X-ray diffraction studies.     

Transition metal-catalyzed formation of boron-nitrogen bonds: catalytic dehydrocoupling of amine-borane adducts to form aminoboranes and borazines

A mild, catalytic dehydrocoupling route to aminoboranes and borazine derivatives from either primary or secondary amine-borane adducts has been developed using late transition metal complexes as precatalysts. The adduct Me(2)NH.BH(3) thermally eliminates hydrogen at 130 degrees C in the condensed phase to afford [Me(2)N-BH(2)](2) (1). Evidence for an intermolecular process, rather than an intramolecular reaction to form Me(2)N=BH(2) as an intermediate, was forthcoming from "hot tube" experiments where no appreciable dehydrocoupling of gaseous Me(2)NH.BH(3) was detected in the range 150-450 degrees C. The dehydrocoupling of Me(2)NH.BH(3) was found to be catalyzed by 0.5 mol % [Rh(1,5-cod)(mu-Cl)](2) in solution at 25 degrees C to give 1 quantitatively after ca. 8 h. The rate of dehydrocoupling was significantly enhanced if the temperature was raised or if the catalyst loading was increased. The catalytic activity of various other transition metal complexes (Ir, Ru, Pd) for the dehydrocoupling of Me(2)NH.BH(3) was also demonstrated. This new catalytic method was extended to other secondary adducts RR'NH.BH(3) which afforded the dimeric species [(1,4-C(4)H(8))N-BH(2)](2) (2) and [PhCH(2)(Me)N-BH(2)](2) (3) or the monomeric aminoborane (i)Pr(2)N=BH(2) (4) under mild conditions. A new synthetic approach to the linear compounds R(2)NH-BH(2)-NR(2)-BH(3) (5: R = Me; 6: R = 1,4-C(4)H(8)) was developed and subsequent catalytic dehydrocoupling of these species yielded the cyclics 1 and 2. The species 5 and 6 are postulated to be intermediates in the formation of 1 and 2 directly from the catalytic dehydrocoupling of the adducts R(2)NH.BH(3). The catalytic dehydrocoupling of NH(3).BH(3), MeNH(2).BH(3), and PhNH(2).BH(3) at 45 degrees C to give the borazine derivatives [RN-BH](3) (10: R = H; 11: R = Me; 12: R = Ph) was demonstrated. TEM analysis of the contents of the reaction solution for the [Rh(1,5-cod)(mu-Cl)](2) catalyzed dehydrocoupling of Me(2)NH.BH(3) together with Hg poisoning experiments suggested a heterogeneous catalytic process involving Rh(0) colloids.     

Linear hybrid aminoborane/phosphinoborane chains: synthesis, proton-hydride interactions, and thermolysis behavior

The reaction of the lithiated phosphine-borane adducts Li[PPhR.BH(3)] or Li[CH(2)-PR(2).BH(3)] with Me(2)NH.BH(2)Cl afforded the hybrid linear species Me(2)NH-BH(2)-PPhR-BH(3) (1, R = Ph; 2, R = H) or Me(2)NH-BH(2)-CH(2)-PR(2)-BH(3) (3, R = Ph; 4, R = Me). Single-crystal X-ray diffraction studies on 1 and 3, the first for linear hybrid aminoborane/phosphinoborane adducts, confirmed the expected four-coordinate N-B-P-B and N-B-C-P-B frameworks. In addition, interactions between the protic N-H and hydridic B-H hydrogen atoms resulted in short intermolecular H...H contacts for 1, whereas 3 was found to possess an exceptionally short intramolecular H...H distance of 1.95 A. Solution and solid state infrared studies on 3 and 4 also suggest that these dihydrogen interactions were maintained even in dilute solution. Hydrogen bond strengths in the range of 7.9 to 10.9 kJ mol(-1) indicate the presence of a relatively weak interaction. The thermal and catalytic dehydrocoupling reactivities of 1-4 were also investigated. Chain cleavage reactions were observed for 1 and 2 upon thermolysis at 130 degrees C to afford species such as Me(2)NH.BH(3), [Me(2)N-BH(2)](2), PhPRH.BH(3) (R = Ph, H), PhPRH (R = Ph, H), Ph(2)PH-BH(2)-PPh(2)-BH(3), and also the low molecular weight polyphosphinoborane [PhPH-BH(2)](n) (M(w) approximately 5000). Similar products were observed for the attempted catalytic dehydrocoupling reactions but under milder reaction conditions (50 degrees C). Thermolysis of 3 at 130 degrees C yielded the six-membered ring [BH(2)-CH(2)-PPh(2)](2) (5), which presumably results from the dissociation of Me(2)NH.BH(3) from 3. Thermolysis of 4 at 90 degrees C afforded Me(2)NH.BH(3) and Me(3)P.BH(3), in addition to a product tentatively assigned as [BH(2)-CH(2)-PMe(2)](2) (6).     

Synthesis and dehydrocoupling reactivity of iron and ruthenium phosphine-borane complexes

The Fe and Ru phosphine-borane complexes CpM(CO)2PPh2 x BH3 (1, M = Fe, 4, M = Ru) were synthesized utilizing the reaction of the phosphine-borane anion Li[PPh2 x BH3] with the iodo complexes CpM(CO)2I. The Fe complex 1 reacted with PMe3 to yield CpFe(CO)(PMe3)(PPh2 x BH3) (2) and CpFe(PMe3)2(PPh2 x BH3) (3) whereas the Ru species 4 gave only CpRu(CO)(PMe3)(PPh2 x BH3) (5). The complexes 1-5 were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, MS, IR and X-ray crystallography for 1 to 4, and EA for 1, 2 and 4. The reactivity of 1 and 4 towards PPh2H x BH3 was explored. Although no stoichiometric reactions were detected under mild conditions, both 1 and 4 were found to function as dehydrocoupling catalysts to afford Ph2PH x BH2 x PPh2 x BH3 in the melt at elevated temperature (120 degrees C). The carbonyl Fe2(CO)9 also functioned as a dehydrocoupling catalyst under similar conditions. Complex 1 and Fe2(CO)9 represent the first reported active Fe complexes for the catalytic dehydrocoupling of phosphine-borane adducts.     

Chemistry of phosphine-borane adducts at platinum centers: dehydrocoupling reactivity of Pt(II) dihydrides with P-H bonds

The reaction of the Pt(II) dihydride complex cis-[PtH2(dcype)](dcype = 1,2-bis(dicyclohexylphosphino)ethane) with the primary or secondary phosphine-borane adducts PhRPH x BH3(R = H, Ph) was found to exclusively afford the mono-substituted complexes cis-[PtH(PPhR x BH3)(dcype)](1: R = H; 2: R = Ph)via a dehydrocoupling reaction between Pt-H and P-H bonds. Similar reactivity was observed between the uncoordinated phosphines PhRPH (R = H, Ph) and cis-[PtH2(dcype)], which gave cis-[PtH(PPhR)(dcype)](4: R = H; 5: R = Ph). The complexes were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, IR, MS and, in the case of 2, X-ray crystallography that confirmed the cis geometries. The di-substituted complex cis-[Pt(PhPH x BH3)2(dcype)](3) was prepared from the reaction of cis-[PtCl2(dcype)] with two equivalents of Li[PPhH x BH3]. This suggested that steric reasons alone cannot be used to explain the lack of reactivity with respect to a second dehydrocoupling reaction involving the remaining Pt-H bond in complexes 1, 2, 4 and 5.     

Heterogeneous or homogeneous catalysis? Mechanistic studies of the rhodium-catalyzed dehydrocoupling of amine-borane and phosphine-borane adducts

In depth, comparative studies on the catalytic dehydrocoupling of the amine-borane adduct Me(2)NH.BH(3) (to form [Me(2)N-BH(2)](2)) and the phosphine-borane adduct Ph(2)PH.BH(3) (to form Ph(2)PH-BH(2)-PPh(2)-BH(3)) with a variety of Rh (pre)catalysts such as [[Rh(1,5-cod)(micro-Cl)](2)], Rh/Al(2)O(3), Rh(colloid)/[Oct(4)N]Cl, and [Rh(1,5-cod)(2)]OTf have been performed in order to determine whether the dehydrocoupling proceeds by a homogeneous or heterogeneous mechanism. The results obtained suggest that the catalytic dehydrocoupling of Me(2)NH.BH(3) is heterogeneous in nature involving Rh(0) colloids, while that of Ph(2)PH.BH(3) proceeds by a homogeneous mechanism even when starting with Rh(0) precursors such as Rh/Al(2)O(3). The catalytic dehydrocoupling reactions are thought to proceed by different mechanisms due to a combination of factors such as (i) the greater reducing strength of amine-borane adducts, (ii) the increased ease of dissociation of phosphine-borane adducts, and (iii) phosphine ligation and/or poisoning of active catalytic sites on metal colloids.     

"Spontaneous" ambient temperature dehydrocoupling of aromatic amine-boranes

The dehydrocoupling/dehydrogenation behavior of primary arylamine-borane adducts ArNH(2)?BH(3) (3?a-c; Ar = a: Ph, b: p-MeOC(6)H(4), c: p-CF(3)C(6)H(4)) has been studied in detail both in solution at ambient temperature as well as in the solid state at ambient or elevated temperatures. The presence of a metal catalyst was found to be unnecessary for the release of H(2). From reactions of 3?a,b in concentrated solutions in THF at 22?°C over 24?h cyclotriborazanes (ArNH-BH(2))(3) (7?a,b) were isolated as THF adducts, 7?a,b?THF, or solvent-free 7?a, which could not be obtained via heating of 3?a-c in the melt. The μ-(anilino)diborane [H(2)B(μ-PhNH)(μ-H)BH(2)] (4?a) was observed in the reaction of 3?a with BH(3)?THF and was characterized in situ. The reaction of 3?a with PhNH(2) (2?a) was found to provide a new, convenient method for the preparation of dianilinoborane (PhNH)(2)BH (5?a), which has potential generality. This observation, together with further studies of reactions of 4?a, 5?a, and 7?a,b, provided insight into the mechanism of the catalyst-free ambient temperature dehydrocoupling of 3?a-c in solution. For example, the reaction of 4?a with 5?a yields 6?a and 7?a. It was found that borazines (ArN-BH)(3) (6?a-c) are not simply formed via dehydrogenation of cyclotriborazanes 7?a-c in solution. The transformation of 7?a to 6?a is slowly induced by 5?a and proceeds via regeneration of 3?a. The adducts 3?a-c also underwent rapid dehydrocoupling in the solid state at elevated temperatures and even very slowly at ambient temperature. From aniline-borane derivative 3?c, the linear iminoborane oligomer (p-CF(3)C(6)H(4))N[BH-NH(p-CF(3)C(6)H(4))](2) (11) was obtained. The single-crystal X-ray structures of 3?a-c, 5?a, 7?a, 7?b?THF, and 11 are discussed.     

Intermediates in the Rh-catalysed dehydrocoupling of phosphine-borane

Active species, product distributions and a suggested catalytic cycle are reported for the dehydrocoupling of the phosphine-borane H(3)B·P(t)Bu(2)H to give HP(t)Bu(2)BH(2)P(t)Bu(2)BH(3) using the [Rh(COD)(2)][BAr(F)(4)] pre-catalyst.     

Synthesis, structures and stabilities of thioanisole-functionalised phosphido-borane complexes of the alkali metals

Treatment of the secondary phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) with BH(3)·SMe(2) gives the corresponding phosphine-borane {(Me(3)Si)(2)CH}PH(BH(3))(C(6)H(4)-2-SMe) (9) as a colourless solid. Deprotonation of 9 with n-BuLi, PhCH(2)Na or PhCH(2)K proceeds cleanly to give the corresponding alkali metal complexes [[{(Me(3)Si)(2)CH}P(BH(3))(C(6)H(4)-2-SMe)]ML](n) [ML = Li(THF), n = 2 (10); ML = Na(tmeda), n = ∞ (11); ML = K(pmdeta), n = 2 (12)] as yellow/orange crystalline solids. X-ray crystallography reveals that the phosphido-borane ligands bind the metal centres through their sulfur and phosphorus atoms and through the hydrogen atoms of the BH(3) group in each case, leading to dimeric or polymeric structures. Compounds 10-12 are stable towards both heat and ambient light; however, on heating in toluene solution in the presence of 10, traces of free phosphine-borane 9 are slowly converted to the free phosphine {(Me(3)Si)(2)CH}PH(C(6)H(4)-2-SMe) (5) with concomitant formation of the corresponding phosphido-bis(borane) complex [{(Me(3)Si)(2)CH}P(BH(3))(2)(C(6)H(4)-2-SMe)]Li (14).     

Ambient temperature, tandem catalytic dehydrocoupling-hydrogenation reactions using Rh colloids and Me2NH.BH3 as a stoichiometric H2 source

Highly active Rh colloids, generated in situ during the catalytic dehydrocoupling of Me2NH.BH3 using [{Rh(cod)(mu-Cl)}2] as a precatalyst, are capable of efficiently hydrogenating alkenes at 25 degrees C in a one-pot procedure using only the evolved H2 from the initial dehydrocoupling reaction.     

Chemical functionality of poly(methylenephosphine): phosphine-borane adducts and methylphosphonium ionomers

The chemical functionality of poly(methylenephosphine) n-Bu[MesP-CPh(2)](n)H () is examined in reactions with two isoelectronic species, namely BH(3) and CH(3)(+). The potential reactivity of polymer is modelled by examining the reactivity of molecular phosphines bearing similar substituents as the polymer. In particular, the phosphine-borane adducts Mes(Me)P(BH(3))-CPh(2)H () and Mes(Me)P(BH(3))-CPh(2)SiMe(2)H () are prepared from the reaction of BH(3).SMe(2) with Mes(Me)P-CPh(2)H () or Mes(Me)P-CPh(2)SiMe(2)H (), respectively. Treating with MeOTf affords the methylated model compound, [Mes(Me)(2)P-CPh(2)H]OTf (). X-Ray crystal structures are reported for each model compound. The reaction of n-Bu[MesP-CPh(2)](n)H (M(n) = 3.89 x 10(4), PDI = 1.34) with BH(3).SMe(2) affords the phosphine-borane polymer n-Bu[MesP(BH(3))-CPh(2)](n)H () (M(n) = 4.13 x 10(4), PDI = 1.26). In contrast, methylation of phosphine polymer gives n-Bu[MesP-CPh(2)](x)-/-[MesP(Me)-CPh(2)](y)H.(OTf)(y) () where approximately 50% of the phosphine moieties are methylated (from (31)P NMR).     

Chemistry of phosphine-borane adducts at platinum centers: synthesis and reactivity of PtII complexes with phosphinoborane ligands

Reaction of [Pt(PEt(3))(3)] with the primary and secondary phosphine-borane adducts PhRPH x BH(3) (R=H, Ph) resulted in oxidative addition of a P-H bond at the Pt(0) center to afford the complexes trans-[PtH(PPhR x BH(3))(PEt(3))(2)] (1: R=H; 2: R=Ph). The products 1 and 2 were characterized by (1)H, (11)B, (13)C, (31)P, and (195)Pt NMR spectroscopy, and the molecular structures were verified by X-ray crystallography. In both cases, a trans arrangement of the hydride ligand with respect to the phosphidoborane ligand was observed. When 2 was treated with PhPH(2) x BH(3), a novel phosphidoborane ligand-exchange reaction occurred which yielded 1 and Ph(2)PH x BH(3). Treatment of 2 with one equivalent of depe (depe=1,2-bis(diethylphosphino)ethane) resulted in the formation of the complex cis-[PtH(PPh(2) x BH(3))(depe)] (3), in which the hydride ligand and the phosphidoborane ligand are in a cis arrangement. Treatment of 3 with PhPH(2) x BH(3) was found to result in an exchange of the phosphidoborane ligands to give the complex cis-[PtH(PPhH x BH(3))(depe)] (4) and Ph(2)PH x BH(3). Complex 4 was found to undergo further reaction in the presence of PhPH(2) x BH(3) to give meso-cis-[Pt(PPhH x BH(3))(2)(depe)] (5) and rac-cis-[Pt(PPhH x BH(3))(2)(depe)] (6).     

Transition metal-catalyzed dissociation of phosphine-gallane adducts: isolation of mechanistic model complexes and heterogeneous catalyst poisoning studies

Attempts to induce the catalytic dehydrocoupling of the phosphine-gallane adduct Cy2PH.GaH3 (Cy=cyclohexyl) (1) by treatment with ca. 5 mol% of either the Rh(I) complex [{Rh(mu-Cl)(1,5-cod)}2] (cod=cyclooctadiene) or the Rh(0) species Rh/Al2O3 and [Oct4N]Cl-stabilized colloidal Rh led to catalytic P-Ga bond cleavage to generate the phosphine, H2, and Ga metal. Interestingly, subsequent treatment of the reaction mixtures with Me2NH.BH3 failed to lead to the formation of [Me2N-BH2]2 via Rh-catalyzed dehydrocoupling, which suggested that catalyst deactivation was taking place. Poisoning studies involving the treatment of the active Rh(0) catalyst with Cy2PH, PMe3, or GaH3.OEt2 showed that deactivation indeed occurred as the dehydrocoupling of Me2NH.BH3 either dramatically decreased in rate or did not take place at all. The X-ray photoelectron spectroscopy analysis of colloidal Rh(0) that had been treated with Cy2PH and PMe3 confirmed the presence of phosphorus on the catalyst surface in each case, consistent with catalyst poisoning via phosphine ligation. A mechanism for the Rh-catalyzed P-Ga bond cleavage reaction of 1 and Me3P.GaH3 (2) is proposed and involves the initial reaction of Ga-H bonds with the Rh colloid surface, which weakens and ultimately breaks the P-Ga bond. The reasonable nature of this mechanism is supported by a model reaction between the zerovalent group 9 complex Co2(CO)8 and 2 which afforded Me3P.Ga[Co(CO)4]3 (3). Consistent with the elongated and thus weakened P-Ga bond in 3, solutions of this species in Et2O subsequently form the known complex [(Me3P)Co(CO)3]2 (4) and Ga metal after 4 h at 25 degrees C.     

Stoichiometric reactivity of dialkylamine boranes with alkaline earth silylamides

Reactions of β-diketiminato group 2 silylamides, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)M(THF)(n){N(SiMe(3))(2)}] (M = Mg, n = 0; M = Ca, Sr, n = 1), and an equimolar quantity of pyrrolidine borane, (CH(2))(4)NH·BH(3), were found to produce amidoborane derivatives of the form [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)MN(CH(2))(4)·BH(3)]. In reactivity reminiscent of analogous reactions performed with dimethylamine borane, addition of a second equivalent of (CH(2))(4)NH·BH(3) to the Mg derivative induced the formation of a species, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)Mg{N(CH(2))(4) BH(2)NMe(2)BH(3)}], containing an anion in which two molecules of the amine borane substrate have been coupled together through the elimination of one molecule of H(2). Both this species and a calcium amidoborane derivative have been characterised by X-ray diffraction techniques and the coupled species is proposed as a key intermediate in catalytic amine borane dehydrocoupling, in reactivity dictated by the charge density of the group 2 centre involved. On the basis of further stoichiometric reactions of the homoleptic group 2 silylamides, [M{N(SiMe(3))(2)}(2)] (M = Mg, Ca, Sr, Ba), with (CH(3))(2)NH·BH(3) and (i)Pr(2)NH·BH(3) reactivity consistent with successive amidoborane β-hydride elimination and [R(2)N[double bond, length as m-dash]BH(2)] insertion is described as a means to induce the B-N dehydrocoupling between amine borane substrates.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

Arylzinc alkoxides: [ArZnOCHPr(i)2]2 and Ar2Zn3(OCHPr(i)2)4 when Ar = C6H5, p-CF3C6H4, 2,4,6-Me3C6H2, and C6F5

From the reactions between diarylzinc compounds (Ar2Zn) and the alcohol (Pr(i)2CHOH) in toluene, the compounds [ArZn(OCHPr(i)2)]2 (Ar = C6H5, C6F5, p-CF3C6H4, and 2,4,6-Me3C6H2) have been isolated and shown to exist in equilibra with the trinuclear complexes Ar2Zn3(OCHPr(i)2)4 and Ar2Zn when Ar = C6H5, C6F5, and p-CF3C6H4. The trinuclear complexes have also been prepared from reactions of the Ar2Zn compounds with the alcohol, which reveals that the ease of Zn-C(aryl) bond cleavage is sensitive to the nature of the Ar group: C6H5 > 4-CF3C6H4 > C6F5. The molecular structures of Ar2Zn3(OCHPr(i)2)4 where Ar = p-CF3C6H4 and C6F5 and [ArZn(OCHPr(i)2)]2 where Ar = C6F5, p-CF3C6H4, and 2,4,6-Me3C6H2 are reported based on single-crystal X-ray diffraction studies. The X-ray structure of Zn(p-CF3C6H4)2 is also reported. The reactivity of these new compounds toward the polymerization of propylene oxide (PO) and the copolymerization of PO and CO2 have been investigated along with related reactions involving the partial hydrolysis of the Ar2Zn and R2Zn compounds, where R = t-Bu, n-Bu, and n-Oct. These results are compared with the previous studies employing Et2Zn as an organozinc precursor.     

Structural importance of secondary interactions in molecules: origin of unconventional conformations of phosphine-borane adducts

The series of phosphine-borane adducts, Ph2(H3C--C[triple chemical bond]C)P--B(C6F5)3 (8 c), Ph(H3C--C[triple chemical bond]C)2P--B(C6F5)3 (8 b) and (H3C--C[triple chemical bond]C)3P--B(C6F5)3 (8 a), was prepared. The X-ray crystal structure analyses revealed close to eclipsed conformations for all members of this series with average dihedral angles theta(C-P-B-C) of 8.1 degrees (8 c), 12.3 degrees (8 b) and 20.3 degrees (8 a). Quantum chemical analysis of these compounds revealed the importance of a subtle interplay between competing attractive and repulsive secondary interactions, causing the surprising eclipsed conformational preference for systems of this degree of complexity. Some cyclic phosphine-borane adducts were studied for comparison.     

High atom-economical one-pot synthesis of secondary phosphines and their borane complexes using recycling phosphorus donor reagent

[reaction: see text] A general new method for the one-pot preparation of secondary phosphines 11 and in situ generation of their borane complexes 12 is described. This method consists of the sequential addition, at room temperature, of equivalent amounts of R(1)MgBr and R(2)MgBr to 1 equiv of the phosphorus atom donor reagent 1. Final treatment with water gives secondary phosphines R(1)R(2)PH (or the corresponding phosphine-borane complexes if treated with BH(3).THF) and the end product 6, which can be recycled.     

Synthesis and the thermal and catalytic dehydrogenation reactions of amine-thioboranes

A series of trimethylamine-thioborane adducts, Me(3)N·BH(2)SR (R = tBu [2a], nBu [2b], iPr [2c], Ph [2d], C(6)F(5) [2e]) have been prepared and characterized. Attempts to access secondary and primary amine adducts of thioboranes via amine-exchange reactions involving these species proved unsuccessful, with the thiolate moiety shown to be vulnerable to displacement by free amine. However, treatment of the arylthioboranes, [BH(2)-SPh](3) (9) and C(6)F(5)SBH(2)·SMe(2) (10) with Me(2)NH and iPr(2)NH successfully yielded the adducts Me(2)NH·BH(2)SR (R = Ph [11a], C(6)F(5) [12a]) and iPr(2)NH·BH(2)SR (R = Ph [11b], C(6)F(5) [12b]) in high yield. These adducts were also shown to be accessible via thermally induced hydrothiolation of the aminoboranes Me(2)N═BH(2), derived from the cyclic dimer [Me(2)N-BH(2)](2) (13), and iPr(2)N═BH(2) (14), respectively. Attempts to prepare the aliphatic thiolate substituted adducts R(2)NH·BH(2)SR' (R = Me, iPr; R' = tBu, nBu, iPr) via this method, however, proved unsuccessful, with the temperatures required to facilitate hydrothiolation also inducing thermal dehydrogenation of the amine-thioborane products to form aminothioboranes, R(2)N═BH(SR'). Thermal and catalytic dehydrogenation of the targeted amine-thioboranes, 11a/11b and 12a/12b were also investigated. Adducts 11b and 12b were cleanly dehydrogenated to yield iPr(2)N═BH(SPh) (22) and iPr(2)N═BH(SC(6)F(5)) (23), respectively, at 100 °C (18 h, toluene), with dehydrogenation also possible at 20 °C (42 h, toluene) with a 2 mol % loading of [Rh(μ-Cl)cod](2) in the case of the former species. Similar studies with adduct 11a evidenced a competitive elimination of H(2) and HSPh upon thermolysis, and other complex reactivity under catalytic conditions, whereas the fluorinated analogue 12a was found to be resistant to dehydrogenation.     

Remarkable reactions of cyclooctatetraene diiron-bridging carbyne complexes with amino and amido compounds: nucleophilic addition to and breaking of the cyclooctatetraene ring

The reactions of the cationic, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(8)-C(8)H(8))]BF(4) (1, Ar=C(6)H(5); 2, Ar=p-CH(3)C(6)H(4); 3, Ar=p-CF(3)C(6)H(4)) with LiN(C(6)H(5))(2) in THF at low temperature gave novel N-nucleophilic-addition products, namely, the neutral, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(7)-C(8)H(8)N(C(6)H(5))(2))] (4, Ar=C(6)H(5); 5, Ar=p-CH(3)C(6)H(4); 6, Ar=p-CF(3)C(6)H(4))). Cationic bridging carbyne complexes 1-3 react with (C(2)H(5))(2)NH, (iC(3)H(7))(2)NH, and (C(6)H(11))(2)NH under the same conditions with ring cleavage of the COT ligand to produce the novel diiron-bridging carbene inner salts [Fe(2)[mu-C(Ar)C(8)H(8)NR(2)](CO)(4)] (7, Ar=C(6)H(5), R=C(2)H(5); 8, Ar=p-CH(3)C(6)H(4), R=C(2)H(5); 9, Ar=p-CF(3)C(6)H(4), R=C(2)H(5); 10, Ar=C(6)H(5), R=iC(3)H(7); 11, Ar=p-CH(3)C(6)H(4), R=iC(3)H(7); 12, Ar=p-CF(3)C(6)H(4), R=iC(3)H(7); 13, Ar=C(6)H(5), R=C(6)H(11); 14, Ar=p-CH(3)C(6)H(4), R=C(6)H(11), 15, Ar=p-CF(3)C(6)H(4), R=C(6)H(11)). Piperidine reacts similarly with cationic carbyne complex 3 to afford the corresponding bridging carbene inner salt [Fe(2)[mu-C(Ar)C(8)H(8)N(CH(2))(5)](CO)(4)] (16). Compound 9 was transformed into a new diiron-bridging carbene inner salt 17, the trans isomer of 9, by heating in benzene. Unexpectedly, the reaction of C(6)H(5)NH(2) with 2 gave a novel COT iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NHC(6)H(5)](mu-CO)(CO)(3)(eta(8)-C(8)H(8))] (18). However, the analogous reactions of 2-naphthylamine with 2 and of p-CF(3)C(6)H(4)NH(2) with 3 produce novel chelated iron-carbene complexes [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(10)H(7)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (19) and [Fe(2)[=C(C(6)H(4)CF(3)-p)NC(6)H(4)CF(3)-p](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (20), respectively. Compound 18 can also be transformed into the analogous chelated iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(6)H(5)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (21). The structures of complexes 6, 9, 15, 17, 18, and 21 have been established by X-ray diffraction studies.