纤维增强复合材料矩形薄板压缩稳定试验及最优设计

本文通过283块玻璃钢矩形薄板的稳定试验,得出试验结果与理论分析一致的结论,证实按各向异性板的屈曲理论公式计算纤维增强复合材料薄板稳定临界载荷是可靠的.本文也给出了各种纤维增强复合材料薄板达到最大临界载荷的最优基体含量和最优偏角的选择,得出的结果可供产品设计时使用.     

锚固岩体参数的等效方法研究

利用岩体中结构体与结构面的刚度系数比较严密地推导了裂隙岩体的等效法向及切向刚度系数;基于岩体小变形、变形可叠加性及强度参数C、φ不相关性假定,利用Coulomb强度理论推导了裂隙岩体等效连续体的等效强度参数C、φ值的表达式.其成果在岩体边坡的整体稳定分析方面具有重要的应用价值,对于推动岩体本构关系的研究具有重要意义.     

中厚板的弹性屈曲和后屈曲

本文采用Reissner假定考虑横向剪切变形的影响,导出弹性矩形板大挠度方程.本文讨论考虑横向剪切变形的矩形板的弹性屈曲和后屈曲.采用文[8]提供的摄动方法,给出了完善和非完善中厚板的后屈曲平衡路径,并与经典薄板理论结果进行了比较.     

非轴对称面内边界力作用下环形板的屈曲和过屈曲

本文基于[1,2]中提出的开孔薄板大挠度的一般理论和[4]中建立的分析开孔薄板屈曲和过屈曲性态的有限单元法,讨论了在边界上受面内非轴对称法向压力作用下环形板的屈曲和过屈曲.     

关于圆簿板大挠度问题的正交条件解法

本文重新考察了钱伟长教授求解圆薄板大挠度问题的系统近似法,发现此法实质上可视为奇异摄动理论中的变形参数法.以无量纲中心挠度为小参数,将挠度、中面薄膜力和载荷参数作渐近展开,我们对所得的递推方程给出了正交条件(可解性条件),据此可确定圆薄板的刚度特性.本文指出,利用圆薄板小挠度解和正交条件,可以不经求解方程而导得载荷参数与中心挠度关系的三阶近似以及中心点、边缘处的薄膜力的首项近似.文中对若干特例(均布载荷、复合载荷、各种边界条件)进行了具体计算,所得的结果与钱伟长、叶开沅、黄黔等人在文[1～4]中给出的结果完全相符.     

复合材料层合板的分析

在复合材料层合板静力和动力分析方面,本文提出了一个层合板理论.此理论从板的总挠度中分开了由弯曲所产生的挠度W_b与由剪切产生的挠度W_s,因而使得求控制方程的解变得容易了.而且便于讨论和分析横向剪切变形对层合板弯曲,振动和稳定性的影响.     

正交异性矩形板后屈曲摄动分析

本文从正交异性板Kármán型大挠度方程出发,以挠度为摄动参数,采用直接摄动法,研究了正交异性矩形板在面内压缩作用下的后屈曲性态.本文讨论了两种面内边界条件,同时考虑了初始挠度的影响.本文给出了多种复合材料板的计算结果.所得结果与实验结果的比较表明二者是一致的.     

复合材料层合剪切圆柱曲板在侧压作用下的后屈曲

基于Reddy高阶剪切变形理论的Kármám-Donnell型非线性壳体方程,给出复合材料层合剪切圆柱曲板在侧压作用下的后屈曲分析。将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。相应的奇异摄动法,用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径。分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善,中等厚度正交铺设层合圆柱曲板的后屈曲荷载-挠度曲线。讨论了横向剪切变形,曲板几何参数,铺层数,铺展方式和初始几何缺陷等各种参数变化的影响。     

基于非局部应变梯度理论功能梯度纳米板的弯曲和屈曲研究

以纳米机器人等智能器件中的功能梯度纳米板结构为研究对象,基于非局部应变梯度理论,研究了其弯曲和屈曲问题.推导了一般情况下的功能梯度纳米板运动方程,弯曲和屈曲作为其特例可简化而成.分析了非局部尺度参数、材料特征尺度参数、梯度指数、纳米板尺寸等对弯曲挠度和临界屈曲载荷的影响.结果表明:不同高阶连续介质力学理论下的最大挠度都随梯度指数的增大而增大,正方形纳米板挠度较小,且板厚越大,弯曲挠度越小;最大挠度随非局部尺度参数的增大而增大,随材料特征尺度参数的增大而减小.临界屈曲载荷随梯度指数的增大而减小,随板厚、长宽比的增大而增大,随非局部尺度的增大而减小,随材料特征尺度的增大而增大.非局部应变梯度高阶弯曲和屈曲中存在结构软化与硬化机制,两个内特征参数之间具有耦合效应,当非局部尺度大于材料特征尺度时,非局部效应在功能梯度纳米板力学性能中占主导作用;当材料特征尺度大于非局部尺度时,应变梯度效应占主导作用.解析结果还证明了当非局部尺度等于材料特征尺度时,非局部应变梯度理论结果退化为经典结果.     

单向压缩简支矩形板后屈曲摄动分析

本文从Kármán板大挠度方程出发,以挠度为摄动参数,采用直接摄动法,研究了简支矩形板在单向压缩作用下的后屈曲性态.本文讨论了两种面内边界条件,同时考虑了初始挠度的影响.计算结果与实验结果的比较表明二者是一致的.本文所用的方法,没有见到有人发表过.作者认为,对于矩形板后屈曲分析,本文是比较简明的.     

Elastoplastic deformation of flexible reinforced plates with a reduced shear strength

The problem of the elastoplastic deformation of reinforced plates taking account of their reduced shear strength is formulated in rectangular Cartesian and cylindrical systems of coordinates within the framework of deformation-type constitutive relations based on the first version of Timoshenko's theory. The mechanical behaviour of annular plates with different helical reinforcement structures is investigated and it is shown that the use of classical theory to calculate the elastoplastic bending of relatively thick and, in some cases, relatively thin reinforced plates leads to an unjustified prediction of the compliance of thin-walled composite structures that is too low. The calculations carried out demonstrate the development of considerable shear deformations in the binder of such plates, that have to be taken into account, since it determines the deformation characteristics of the structures studied. The results of calculations obtained using two structural models are compared.     

横向剪切对双模量复合材料叠层矩形板非线性弯曲的影响

本文探讨了动力松弛(DR)法在双模量复合材料叠层矩形板非线性弯曲问题中的应用。在分析中分别采用叠层板大挠度经典理论和计及大转动(在Von Karman意义上)的复合材料叠层板剪切变形理论。我们发现,对于考虑横向剪切变形的非线性弯曲问题,如何计算虚拟密度以控制数值计算的稳定性,仍然需要进一步研究。本文提出了一种虚拟密度的计算方法,从而保证了本课题数值计算的稳定性。文中介绍了用DR法求解双模量复合材料叠层板非线性弯曲的主要步骤,给出了由轻度双模量材料(Born-Epxy(B-E))和高度双模量材料(Aramid-Rubber(A-R)和Polyester-Rubber(P-R))的两层正交叠层简支矩形板在正弦分布载荷及均布载荷作用下的非线性弯曲特性的数值结果。将所得结果和小挠度分析结果及普通复合材料的结果作了比较,并分析了横向剪切变形对无量纲中心挠度的影响。     

弹性厚矩形板受迫振动的功的互等定理法

本文将功的互等定理法（ＲＴＭ）推广应用于求解基于Ｒｅｉｓｓｎｅｒ理论的厚矩形板受迫振动问题·本文导出了厚矩形板动力基本解；给出了三边固定一边自由厚矩形板在均布简谐干挠力作用下稳态响应的精确解析解·这是计算厚矩形板受振动稳态响应的一个简便通用的方法·     

Application of a refined theory of torsional vibrations to the calculation of natural frequencies and damping coefficients of orthotropic composite cantilever rods

For calculating the natural complex frequencies of torsional vibrations of rectangular orthotropic composite cantilever rods, a theory taking into account the normal stresses and inertial forces acting in the axial direction is employed. The results obtained are compared with those found by using the classical theory of torsional vibrations of rods, the theory of vibrations of thin orthotropic plates, and the FEM. It is found that the difference between the natural frequencies given by the classical and refined theories depends on relations between geometrical sizes of a rod and between its axial elastic modulus and shear moduli, and on the number of the mode of torsional vibrations.     

矩形薄板弹性振动的一般解析解

本文建立了矩形薄板弹性横向自由振动位型函数微分方程的一般解,可以求解任意边界矩形薄板的振动问题.以四边自由矩形板为例求解了板的频率及其振型.     

Nonlinear flexural response of laminated composite plates under hygro-thermo-mechanical loading

The paper deals with Chebyshev series based analytical solution for the nonlinear flexural response of the elastically supported moderately thick laminated composite rectangular plates subjected to hygro-thermo-mechanical loading. The mathematical formulation is based on higher order shear deformation theory (HSDT) and von-Karman nonlinear kinematics. The elastic foundation is modeled as shear deformable with cubic nonlinearity. The elastic and hygrothermal properties of the fiber reinforced composite material are considered to be dependent on temperature and moisture concentration and have been evaluated utilizing micromechanics model. The quadratic extrapolation technique is used for linearization and fast converging finite double Chebyshev series is used for spatial discretization of the governing nonlinear equations of equilibrium. The effects of Winkler and Pasternak foundation parameters, temperature and moisture concentration on nonlinear flexural response of the laminated composite rectangular plate with different lamination scheme and boundary conditions are presented.     

Accurate bending analysis of rectangular plates with two adjacent edges free and the others clamped or simply supported based on new symplectic approach

The symplectic geometry approach is introduced for accurate bending analysis of rectangular thin plates with two adjacent edges free and the others clamped or simply supported. The basic equations for rectangular plates are first transferred into Hamilton canonical equations. Using the symplectic approach, the analytic solution of rectangular thin plate with two adjacent edges simply supported and the others slidingly supported is derived. Accurate bending solutions of title problems are then obtained using the superposition method. The approach used in this paper eliminates the need to pre-determine the deformation function and is hence more reasonable than conventional methods. Numerical results are presented to demonstrate the validity and efficiency of the approach as compared with those reported in other literatures.     

均布荷载下悬臂矩形板的弯曲

在薄板理论中,悬臂矩形板的弯曲,长期以来是个难题,因而,现有的解均属于近似解,如列出几位曾解过这问题的作者,可提到L.V.Kantorovich,D.L.Holl,W.A.Nash,H.J.Plass,Jr.等.他们所用的方法为变分法或差分法.本文将作出一个精确解.它满足微分方程及复杂的边界条件,包括自由角点条件.在我们的方法中,用了叠加法及广义简支边这概念.它的特点是:沿边各点的弯矩为零,但挠度是存在的,因而要满足自由边的条件.只须消除剩余的剪力.顾及自由角点的位移,只须叠加符合要求的一些简单的弯曲面方程.所得的结果与近似解很好地核对,充分证实了现在这解是正确的.     

An exact deformation analysis for the magneto-electro-elastic fiber-reinforced thin plate

A closed form expressions for bending problem of magneto-electro-elastic (MEE) rectangular thin plates are derived, the exact solutions for the deformation behaviors of the fiber-reinforced BaTiO₃/CoFe₂O₄ composites subjected to certain types of surface loads are analytically obtained. Based on Kirchhoff thin-plate theory, structural characteristics such as elastic displacements, electric potential and magnetic induction for magneto-electro-elastic (MEE) rectangular plates are investigated, the governing equation in terms of the transverse displacement is presented in a rather compact form due to the omission of the transverse shear deformation and rotatory inertia. The material coefficients for the MEE plate can be uniquely expressed by the volume-fraction (v.f.) of piezoelectric constituent BaTiO₃ in the fiber-reinforced composite, and are tabulated with 25% offset of the volume-fraction. The deformation variations of the MEE thin plate with closed-circuit electric restriction are evaluated analytically according to their specified boundary conditions, and the effects of the volume-fractions on the deformations variations are discussed. It can be found that all the results obtained by using the proposed model have reached good agreements with the other available research works, whereas, the present study provides a much simpler way in seeking the analytic solutions for the interactively coupled quantities of a multiphase medium.