共查询到19条相似文献,搜索用时 125 毫秒
1.
2.
3.
4.
5.
《化学分析计量》2021,30(3)
为评价实验室对铁矿石的测试能力和技术水平,青岛海关技术中心于2019年组织实施了铁矿石检测的能力验证计划。该能力验证有中国和澳大利亚的52家实验室参加,主要包括海关系统、矿山公司、第三方检验公司及地质行业。能力验证项目为全铁、二氧化硅、三氧化二铝、磷、硫的检测能力,对各参加实验室提交的检测数据进行稳健统计分析。该次能力验证共收回检测结果218个;其中不满意结果3个,占总数的1.4%;异常结果9个,占总数的7.6%;满意结果206个,占总数的91%。与2018年能力验证结果相比,参加实验室数量及全铁、二氧化硅、三氧化二铝、磷、硫5个项目检测结果的满意率均有所提高。表明绝大多数参试实验室可以准确检测铁矿石中的全铁、二氧化硅、三氧化二铝、磷、硫。 相似文献
6.
铝合金中Si、Fe含量测定的实验室间比对结果分析 总被引:1,自引:0,他引:1
为了解河南省内实验室在铝合金化学成分检测领域的整体水平,国家建材质检中心组织实施了铝合金化学成分中Si、Fe含量测定的实验室间比对。本次实验室比对共有20个实验室参加,推荐检测方法为:GB/T 7999-2007《铝及铝合金光电直读发射光谱分析方法》,也可采用其他国家标准方法。结果表明:实验室满意结果率为80%,不满意结果率为15%,可疑结果率为5%。参加比对的绝大多数实验室能够准确检测铝合金化学成分含量。 相似文献
7.
能力验证是判断和监控检测/校准实验室能力的有效手段,同时也是评价实验室技术能力的重要依据之一。为更好地考核实验室技术能力,能力验证样品通常设计成分割水平样品,即组织者为每个参加能力验证的实验室提供两份目标值水平略有差 相似文献
8.
9.
10.
能力验证是利用实验室间比对确定实验室检测能力的活动,其评价结果多用于评估单个实验室的检测能力。行业监管部门期望掌握实验室整体能力和检测方法的相关信息,为分析参加实验室的整体检测能力和不同测试方法的差异,分析了3年航空煤油检测能力验证结果,采用满意结果百分比、|Z|值平均值随参加能力验证次数的变动情况,证实了能力验证对整体检测能力的改进作用;利用异方差t检验,比较不同测试方法结果的一致性和精密度差异;通过比较能力验证评价标准差和检测标准的精密度要求,评价参加实验室整体检测能力是否符合检测标准要求。研究表明,能力验证数据能够用于定量分析参加实验室的整体检测能力,为行业实验室监管和检测方法间比对提供依据。 相似文献
11.
12.
13.
邓军华 《中国无机分析化学》2012,2(1):83-86
依据GB/T15000.3—2008、GB/T15000.5—1994、YB/T082—1996和相关ISO导则研制了铝锰铁合金化学分析用标准样品。样品经过加工混匀后,按要求进行粒度实验和均匀性检验。采用Minitab软件进行均匀性数据的正态性检验,然后用方差法进行均匀性检验,各元素F值均小于临界值F0.05,表明被检元素的均匀性良好。由7家有资质的实验室采用多种不同原理,准确、可靠的分析方法协作定值分析,对分析结果进行统计和处理,得到了定值元素的认定值。结果表明该标准物质均匀性和稳定性以及定值准确性均达到国家标准物质的性能指标,符合国家计量技术规范的要求。 相似文献
14.
探讨苏丹红国标检测方法存在的问题并在该方法的基础上进行改进。用正己烷提取样品中的苏丹红染料,通过中性氧化铝小柱富集并去除杂质和内源性色素的干扰,高度外标法定量。在选定的分离条件下,苏丹红Ⅰ~Ⅳ色谱峰分离良好,检出限分别为8、9、9、10μg/kg,测定结果相对标准偏差分别为0.3%、0.2%、0.1%、0.1%(n=6)。苏丹红Ⅰ~Ⅳ的浓度分别在2.16~7.56、2.02~7.07、2.0~7.0、2.08~7.28μg/mL范围内与响应值具有良好的线性关系,线性相关系数分别为0.999 9、0.999 8、0.999 9、0.999 9。改进后的方法适合基层检验机构使用。 相似文献
15.
Lav Tandon Kevin Kuhn Diana Decker Donivan Porterfield Kenneth Laintz Amy Wong Michael Holland Dominic S. Peterson 《Journal of Radioanalytical and Nuclear Chemistry》2009,282(2):565-571
Plutonium metal exchange programs operated by the Rocky Flats Plant were conducted from 1956–1989 to ensure quality and to
compare measurements in a plutonium metal matrix. Los Alamos National Laboratory (LANL) re-established the program in 2001
to assess the quality of analytical chemistry capabilities that support special nuclear material characterization. It is the
only program of its kind for the preparation and distribution of plutonium metal reference materials with a range of impurity
contents to multiple laboratories for destructive measurements of elemental concentration, isotopic abundance, and both metallic
and non-metallic impurity levels. This program provides independent verification of analytical measurement capabilities for
each of the seven currently participating laboratories, and allows any technical problems with analytical measurements to
be identified and corrected. This paper focuses on basic program elements and presents a summary of methods and results for
plutonium, uranium, neptunium, and americium, measurements. 相似文献
16.
XRF分析铁矿粉的标准选择判据研究和应用 总被引:2,自引:0,他引:2
本文对XRF法分析铁矿的基体校正元素进行了研究,并建立了标准选择判据,编制的计算软件可以自动地从大量标样中选择适合该样品分析的标准。该法可用于粉末压片制样的分析,方法快速,准确度和精密度均符合生产要求。 相似文献
17.
An interlaboratory comparison study for the determination of 5 residual organochlorine pesticides (hexachlorobenzene and 4 hexachlorocyclohexane isomers) in ginseng root was performed. This program [Asia Pacific Laboratory Accreditation Cooperation (APLAC) T049] was the first of its kind for an herbal matrix and involved the participation of 70 laboratories from 26 countries worldwide. Consensus mean values were computed statistically from the reported results, which were eventually used to assess the performance of individual laboratories in terms of the z-scores. The distribution of analytical data was found to be widespread, with standard deviation ranging from 43.9 to 55.9%, and the result patterns obtained were similar to those residue pesticide programs using other matrixes. Although the estimation of measurement uncertainty is a crucial requirement for all quantitative tests for laboratories that meet the requirements of International Organization for Standardization/International Electrotechnical Commisssion (ISO/IEC) 17025, some laboratories in this program had difficulties and showed unfamiliarity with respect to that quality criterion. It was recommended that laboratories review and rectify the situation promptly so that they would have a better understanding of measurement uncertainty or the test service provided. 相似文献
18.
19.
对用GB/T3558-1996《煤中氯的测定方法》中高温燃烧水解-电位滴定法测定煤中氯含量测定结果的不确定度进行了评定。通过对影响测定结果的不确定度分量的分析和量化,求得煤中氯含量测定结果的扩展不确定度为0.003%。 相似文献