An efficient,mild and selective Ullmann‐type N‐arylation of indoles catalysed by Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 as heterogeneous and recyclable nanocatalyst

A wide range of N‐arylated indoles were selectively synthesized through intermolecular C(aryl)? N bond formation from the corresponding aryl iodides and indoles through Ullmann‐type coupling reactions in the presence of a catalytic amount of Pd immobilized on amidoxime‐functionalized mesoporous SBA‐15 (SBA‐15/AO/Pd(0)) under mild reaction conditions. These cross‐coupled products were obtained in excellent yields under mild conditions at extremely low palladium loading (ca 0.3 mol%), and the heterogeneous catalyst can be readily recovered by simple filtration and reused seven times with loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

NHC‐Pd complex based on 1,3‐bis (4‐ethoxycarbonylphenyl) imidazolium chloride: synthesis,structure and catalytic activity in the synthesis of axially chiral benzophenone hydrazone

A novel NHC–Pd complex of 1,3‐bis (4‐ethoxycarbonylphenyl) imidazolium chloride has been synthesized and characterized by ¹H NMR, ¹³C NMR, IR and X‐ray single‐crystal diffraction studies. TG analysis shows that the NHC‐Pd complex is stable under 208 °C. The catalytic activities have been explored for the synthesis of axially chiral N‐(2′‐methoxy‐1,1′‐binaphthalen‐2‐yl) benzophenone hydrazone. The result indicates that the novel NHC‐Pd complex can achieve better catalytic activity than the Pd‐phosphine catalysts in the synthesis of axially chiral N‐(2′‐methoxy‐1,1′‐binaphthalen‐2‐yl) benzophenone hydrazone.     

Synthesis of polyphenol microsphere‐supported palladium complex and evaluation of its catalytic performance for Heck reaction

Polyphenol microspheres were prepared by template polymerization of phenol in the presence of horseradish peroxidase as bio‐enzyme catalyst and aqueous 1,4‐dioxane as solvent. The morphology of polyphenol microspheres thus obtained was observed with a scanning electron microscope. Further, polyphenol microspheres as obtained were loaded with palladium to generate polyphenol microsphere‐supported Pd complex. Resultant Pd complex catalyst supported by polyphenol microspheres was characterized by means of Fourier transformation infrared spectrometry, X‐ray diffraction, X‐ray photoelectron spectroscopy and scanning electron microscopy, and its thermal stability was examined. Moreover, the catalytic activity of polyphenol microsphere‐supported Pd catalyst as synthesized for the Heck reactions of acrylic acid with aryl iodides was evaluated. Results indicate that the polyphenol microsphere as obtained has a diameter of about 500 nm. Polyphenol microsphere‐supported Pd catalyst, as synthesized, at a dosage of 0.37 mol% Pd, possesses good catalytic activity for the Heck reactions of acrylic acid with aryl iodides in air at a low temperature of 50°C, and it also exhibits catalytic activity for bromide and activated chlorobenzene. The polyphenol microsphere‐supported Pd complex has good thermal stability, and it can be readily separated and reused; the yield of the reaction of iodobenzene with acrylic acid remains at 82% after five recycle runs, showing promising potential as a catalyst for Heck reactions. Copyright © 2012 John Wiley & Sons, Ltd.     

A phosphine‐free heterogeneous Suzuki–Miyaura reaction of aryl bromides catalyzed by MCM‐41‐supported tridentate nitrogen palladium complex under air

MCM‐41‐supported tridentate nitrogen palladium(II) complex [MCM‐41‐3 N‐Pd(II)] was conveniently synthesized from commercially available and cheap 3‐(2‐aminoethylamino)propyltrimethoxysilane via immobilization on MCM‐41, followed by reacting with pyridine‐2‐carboxaldehyde and PdCl₂. It was found that this palladium complex is an excellent catalyst for the Suzuki–Miyaura coupling reaction of aryl bromides on two points: (i) the use of 5 × 10⁻⁴ mol equiv. of MCM‐41‐3 N‐Pd(II) under air afforded the coupling products efficiently after easy workup; (2) the catalyst can be reused many times without loss of catalytic activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Palladium nanoparticles deposited on a graphene–benzimidazole support as an efficient and recyclable catalyst for aqueous‐phase Suzuki–Miyaura coupling reaction

Graphene oxide was functionalized with benzimidazole for palladium immobilization. The resultant graphene–benzimidazole‐supported palladium composite (G‐BI‐Pd) was characterized using infrared and Raman spectroscopies, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. G‐BI‐Pd showed excellent catalytic activity and fast reaction kinetics in the aqueous‐phase Suzuki–Miyaura reaction of aryl iodides and bromides with phenylboronic acid under relatively mild conditions (5–25 min, 80 °C). The catalyst can be used several times without any significant loss of its catalytic activity.     

Highly dispersed palladium nanoclusters incorporated in amino‐functionalized silica spheres for the selective hydrogenation of succinic acid to γ‐butyrolactone

Highly dispersed palladium nanoclusters incorporated on amino‐functionalized silica sphere surfaces (Pd/SiO₂‐NH₂) were fabricated by a simple one‐pot synthesis utilizing 3‐(2‐aminoethylamino)propyltrimethoxysilane (AAPTS) as coordinating agent. Uniform palladium nanoclusters with an average size of 1.1 nm can be obtained during the co‐condensation of tetraethyl orthosilicate and AAPTS owing to the strong interaction between palladium species and amino groups in AAPTS. The palladium particle size can be controlled by addition of AAPTS and plays a significant role in the catalytic performance. The Pd/SiO₂‐NH₂ catalyst exhibits high catalytic activity for succinic acid hydrogenation with 100% conversion and 94% selectivity towards γ‐butyrolactone using 1,4‐dioxane as solvent at 240°C and 60 bar for 4 h. Moreover, the Pd/SiO₂‐NH₂ catalyst is robust and readily reusable without loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of FePd‐RGO Bimetallic Composites with High Catalytic Activity for Formic Acid Electro‐Oxidation

FePd‐RGO composites through the growth of uniformly dispersed iron‐palladium bimetallic nanoparticles (NPs) on reduced graphene oxide (RGO) nanosheets were prepared by a two‐step method. The firstly formed Fe is used as the seed for the subsequent Pd growth. The formation of Fe NPs on RGO in the first step is performed by an in‐situ reduction reaction with the reducer ethylene glycol under oil bath at 180°C. NPs in the as‐prepared FePd‐RGO have an average particle size of 6.5 nm, and Pd is added to one side of Fe which leads to the formation of Fe‐Pd bimetallic interfaces. As compared with the commercial Pd black at the same loading, the composites have higher electro‐catalytic activity, better electrochemical stability and higher resistance to CO poisoning for formic acid electro‐oxidation.     

Palladium‐catalyzed carbonylation of quaternary ammonium halides to tertiary amides

Catalytic carbonylation of quaternary ammonium salts under anhydrous conditions was investigated using palladium catalyst. The carbonylation of tetramethylammonium iodide was chosen as a model reaction and studied systematically. Ligand‐free PdCl₂ showed efficient catalytic performance for this transformation. A palladium catalyst loading as low as 0.05 mol% was sufficient for high yield (96.9%) of N,N‐dimethylacetamide, corresponding to a turnover frequency of 242 h^?1. Under optimum conditions, several other quaternary ammonium halides were also carbonylated to corresponding tertiary amides in moderate to excellent yields. The catalytic activity of commercial palladium on activated carbon (Pd/C) catalyst was also evaluated. The Pd/C catalyst exhibited high activity for this carbonylation reaction and could be recycled six times with a slight decrease in activity. Furthermore, mechanistic considerations concerning Pd‐catalyzed carbonylation of quaternary ammonium halides were also discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

A novel imidazolium‐supported palladium–chloroglycine complex: copper‐ and solvent‐free high‐turnover catalysts for the Sonogashira coupling reaction

A novel, effective 1‐glycyl‐3‐methyl imidazolium chloride–palladium(II) complex ([Gmim]Cl–Pd(II)) was synthesized and studied as an organocatalyst for the Sonogashira coupling reaction under solvent‐free conditions at 25 °C. The hydrophobic group on amino acid favors reagent diffusion toward the chloroglycine moiety, increasing the catalytic activity of supported palladium complex. By this protocol, different aryl halides (Cl, Br and I) were reacted with phenylacetylene in good to excellent yields with turnover number 8.0 × 10² to 9.6 × 10². The catalyst was recycled for the reaction of bromobenzene with phenylacetylene for eight runs without appreciable loss of its catalytic activity and negligible metal leaching. Copyright © 2012 John Wiley & Sons, Ltd.     

The influence of thermal treatment on the electrochemical properties of carbon–Ni–Pd composites

Resorcinol–formaldehyde (RF) hydrogel and RF–nickel–palladium (RF–Ni–Pd) hydrogel were synthesized by sol–gel polycondensation followed by ambient drying. Carbon gel and carbon–nickel–palladium doped gels were prepared by carbonizing the RF and RF–Ni–Pd gels at 900 °C under a nitrogen atmosphere. The goal of this study was to determine the effect of oxidative thermal treatment on the electrochemical activity of nickel–palladium doped carbon gels (C–Ni–Pd). The scanning electron microscopy analysis, adsorption and X-ray diffraction measurements showed that the admixture of Ni and Pd to carbon matrix resulted in the modification of morphological, porous and crystalline features. It has been demonstrated that composite C–Ni–Pd composed of sphere-like granules incrusted with well-crystalline nickel and palladium particles exhibits electrochemical activity in 6 M KOH aqueous solution. Thermal treatment of the composite carried out in air at 450 °C brought about the improvement of electrochemical activity in the potential range of the hydrogen sorption/desorption reaction.     

Performance of Pd Electrocatalyst Supported on a Physical Mixture Indium Tin Oxide–carbon for Glycerol Electro–oxidation in Alkaline Media

Palladium electrocatalysts, supported on Vulcan XC 72 carbon and indium tin oxide (ITO) with different ratios, were prepared by borohydride reduction method and analysed for glycerol electro‐oxidation application in the presence of KOH solution. Transmission electron microscopy (TEM) and X‐ray diffraction (XRD) techniques were used to characterize the particle size and crystal electrocatalyst structures, whereas their catalytic activities regarding the glycerol electro‐oxidation were evaluated by cyclic voltammetry (CV), chronoamperometry and tested in a direct alkaline glycerol fuel cell (DGFC) by electrochemical techniques. Micrographs results showed that the ITO presence promotes a large agglomeration of particles. Pd/C–ITO electrocatalysts showed peaks associated with the face‐centered cubic (fcc) structure of palladium and several others peaks associated with ITO used as support. Similar performance was found on all Pd/C–ITO electrocatalysts where measurements in CV were compared to Pd/C and Pd/ITO with Pd/C–ITO 50:50 chronoamperometry, presenting a better performance for glycerol electro‐oxidation. When using Pd/C–ITO 85:15 electrocatalyst and 1.0 mol L⁻¹ glycerol at 90 °C, the maximum power density found was 2,1 times higher than that obtained using Pd/C and Pd/CITO electrocatalysts. Therefore, the physical mixture of ITO and carbon, to be used as a support improves the electrocatalytic activity for glycerol oxidation reaction.     

乙二胺功能化树脂负载Pd(0)配合物：可重复使用的高活性Heck芳基化催化剂

The ethylenediamine-functionalized resin-supported Pd(0)complex was prepared from PdCl_2 and ethylenedia-mine-functionalized chloromethylated polystyrene,followed by reduction with KBH_4.The complex was character-ized by FT-IR,XRD,BET,SEM and EDS.The resin-supported catalyst exhibited high catalytic activity in theHeck reaction and could be reused up to 17 times in NMP or 16 times in DMF at 90 ℃ in the Heck reaction of io-dobenzene with acrylic acid.The leaching investigation disclosed that the palladium leaching was caused by the in-teraction of iodobenzene with the metal Pd(0)on supported catalyst.The leached palladium species in filtrate wasvery stable and could be reused five times after the solid catalyst was filtered off.A cross-transfer test in recyclingin the presence of additional carbon disclosed that the soluble leached palladium species had much higher catalyticactivity than supported and/or adsorbed palladium in solid-solution heterogeneous Heck reaction.     

一种经MCM-41负载双齿膦钯(0)配合物催化的羰基化Suzuki偶联合成二芳酮的新途径

在催化量的MCM-41负载双齿膦钯(0)配合物存在下,芳基碘化物和芳基硼酸、一氧化碳在常压下能顺利进行羰基化Suzuki偶联反应,高产率地生成了各种二芳酮化合物。MCM-41负载双齿膦钯(0)配合物具有比PdCl2(PPh3)2 更高的活性和选择性,且可回收再用10次其活性基本不变,为各种功能化二芳酮的合成提供了方便实用的新途径。     

Palladium‐anchored multidentate SBA‐15/di‐urea nanoreactor: A highly active catalyst for Suzuki coupling reaction

Modification of mesoporous silica was carried out by reaction of SBA‐15 with di‐urea‐based ligand. Next, with the help of this ligand, palladium ions were anchored within the multidentate SBA‐15/di‐urea pore channels with high dispersion. The SBA‐15/di‐urea/Pd catalyst was characterized using various techniques. Theoretical calculations indicated that each palladium ion was strongly interacted with one nitrogen and two oxygen atoms from the multidentate di‐urea ligand located in SBA‐15 channels and these interactions remained during the catalytic cycle. These results are in good agreement with those of hot filtration test: the palladium ions have very high stability against leaching from the SBA‐15/di‐urea support. The catalytic performance of SBA‐15/di‐urea/Pd nanostructure was examined for the Suzuki coupling reaction of phenylboronic acid and electronically diverse aryl halides under mild conditions with a minimal amount of Pd (0.26 mol%). Compared to previous reports, this protocol afforded some advantages such as short reaction times, high yields of products, catalyst stability without leaching, easy catalyst recovery and preservation of catalytic activity for at least six successive runs.     

Palladium Nanoparticles Supported on a Porous Organic Polymer: An Efficient Catalyst for Suzuki‐Miyaura and Sonogashira Coupling Reactions

A new porous organic polymer (POP) with high thermal stability and large surface area has been synthesized and applied in the preparation of Pd/POP catalyst. Pd/POP was characterized by XRD, TGA, SEM and TEM. The catalyst consists of highly dispersed palladium nanoparticles of 0.9–4 nm size on POP with a large surface area of 650 m²/g. It presents high catalytic activity for Suzuki‐Miyaura and Sonogashira reactions. The catalyst was reusable for three to five times without significant loss of activity.     

Metal–organic framework derived Pd/ZrO2@CN as a stable catalyst for the catalytic hydrogenation of 2,3,5‐trimethylbenzoquinone

Metal–organic frameworks (MOFs) have recently been identified as versatile sacrificing templates to construct functional nanomaterials for heterogeneous catalysis. Herein, we report a thermal transformation strategy to directly fabricate metal Pd nanoclusters inlaid within a ZrO₂@nitrogen‐doped porous carbon (Pd/ZrO₂@CN) composite using Pd@NH₂‐UiO‐66(Zr) as a precursor that was pre‐synthesized by a one‐pot hydrothermal method. The developed Pd/ZrO₂@CN as a robust catalyst delivered remarkable stability and activity to the catalytic hydrogenation of 2,3,5‐trimethylbenzoquinone (TMBQ) to 2,3,5‐trimethylhydroquinone (TMHQ), a key reaction involved in vitamin E production. The hydrogenation was carried out at 110 °C with 1.0 MPa H₂, and it resulted in 98% TMHQ yield as the sole product over five consecutive cycles, outperforming the analogue Pd/ZrO₂@C without nitrogen doping templated from Pd@UiO‐66(Zr). The excellent catalytic properties of Pd/ZrO₂@CN likely originated from the highly stable ultrafine Pd nanoclusters inlaid within ZrO₂@CN matrix on account of the strong interaction between N and Pd, as well as on the Lewis acidity of ZrO₂, which was beneficial to the hydrogenation.     

Synthesis of poly(ether ketone amide)s containing 4‐aryl‐2,6‐ diphenylpyridine moieties by a heterogeneous palladium‐catalyzed polycondensation of aromatic diiodides,aromatic diamines,and carbon monoxide

New aromatic poly(ether ketone amide)s containing 4‐aryl‐2,6‐diphenylpyridine units were prepared by the heterogeneous palladium‐catalyzed carbonylative polymerization of aromatic diiodides with ether ketone units, aromatic diamines bearing pyridine groups, and carbon monoxide. Polymerizations were performed in N,N‐dimethyl‐ acetamide (DMAc) at 120°C in the presence of a magnetic nanoparticles‐supported bidentate phosphine palladium complex [Fe₃O₄@SiO₂‐2P‐PdCl₂] as catalyst with 1,8‐diazabicycle[5,4,0]‐7‐undecene (DBU) as base and generated poly(ether ketone amide)s with inherent viscosities up to 0.79 dL/g. All the polymers were soluble in many organic solvents. These polymers showed glass transition temperatures between 219°C and 257°C and 10% weight loss temperatures ranging from 467°C to 508°C in nitrogen. These polyamides could be cast into transparent, flexible, and strong films from DMAc solution with tensile strengths of 86.4 to 113.7 MPa, tensile moduli of 2.34 to 3.19 GPa, and elongations at break of 5.2% to 6.9%. These polymers also exhibited good optical transparency with an ultraviolet‐visible absorption cut‐off wavelength in the 371 to 384‐nm range. Importantly, the new heterogeneous palladium catalyst can easily be recovered from the reaction mixture by simply applying an external magnet and recycled at least 8 times without significant loss of activity. Our catalytic system not only avoids the use of an excess of PPh₃ and prevents the formation of palladium black, but also solves the basic problems of palladium catalyst recovery and reuse.     

Magnetite tethered mesoionic carbene‐palladium (II): An efficient and reusable nanomagnetic catalyst for Suzuki‐Miyaura and Mizoroki‐Heck cross‐coupling reactions in aqueous medium

In this paper, a highly active, air‐ and moisture‐stable and easily recoverable magnetic nanoparticles tethered mesoionic carbene palladium (II) complex (MNPs‐MIC‐Pd) as nanomagnetic catalyst was successfully synthesized by a simplistic multistep synthesis under aerobic conditions using commercially available inexpensive chemicals for the first time. The synthesized MNPs‐MIC‐Pd nanomagnetic catalyst was in‐depth characterized by numerous physicochemical techniques such as FT‐IR, ICP‐AES, FESEM, EDS, TEM, p‐XRD, XPS, TGA and BET surface area analysis. The prepared MNPs‐MIC‐Pd nanomagnetic catalyst was used to catalyze the Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions and exhibited excellent catalytic activity for various substrates under mild reaction conditions. Moreover, MNPs‐MIC‐Pd nanomagnetic catalyst could be easily and rapidly recovered by applying an external magnet. The recovered MNPs‐MIC‐Pd nanomagnetic catalyst exhibited very good catalytic activity up to ten times in Suzuki–Miyaura and five times in Mizoroki–Heck cross‐coupling reactions without considerable loss of its catalytic activity. However, MNPs‐MIC‐Pd nanomagnetic catalyst shows notable advantages such as heterogeneous nature, efficient catalytic activity, mild reaction conditions, easy magnetic work up and recyclability.     

Nano tetraimine Pd(0) complex as an efficient catalyst for phosphine‐free Suzuki reaction in water and copper‐free Sonogashira reaction under aerobic conditions

A nano tetraimine Pd(0) complex catalyst was successfully used as an efficient heterogeneous catalyst for the phosphine‐free palladium‐catalysed Suzuki coupling reaction in water at 80 °C. This nano tetraimine Pd(0) complex was also used for copper‐free Sonogashira reaction in dimethylformamide at 100 °C. The catalyst was easily recovered from the reaction mixture by centrifugation and reused for at least six cycles without any significant loss in its catalytic activity. Analysis of the reaction mixture using inductively coupled plasma analysis showed that leaching of palladium from the catalyst was negligible. The reactions can be performed efficiently for aryl iodides, bromides and also chlorides. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation and Catalytic Performance of Carbon Nanotube Supported Palladium Catalyst

Two carbon nanotube supported palladium catalysts were prepared using a chemical reduction technique (Pd/CR‐CNT) and a conventional impregnation method (Pd/CNT) respectively, and their catalytic performances for Heck reaction were investigated. The catalysts were characterized by TEM and XPS techniques and the products were characterized by ¹H NMR. Research results showed that the (Pd/CR‐CNT) catalyst showed a better catalytic activity than the (Pd/CNT) catalyst, owing to better dispersion of palladium nanoparticles and stronger interaction between the active palladium species and carbon nanotube. Meanwhile, the product yield maintained 99.93% of its initial value at five‐times re‐use, compared with that at the first time use. The catalyst prepared with the chemical reduction method represented a better reusing performance.