Spectrophotometric Determination of Albendazole Drug in Tablets: Spectroscopic Characterization of the Charge-transfer Solid Complexes

Simple, rapid and reliable method for the determination of albendazole (ABZ) was described. This includes the utility of some Π‐acceptors such as 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ) and 3,6‐dichloro‐2,5‐dihy‐ droxy‐p‐benzoquinone (p‐CLA) for estimation of ABZ drug (act as donor). The experimental conditions were optimized and the system obeys Beer's law for 7.50–80 and 10.00–85.00 µg·mL^?1 of ABZ using DDQ and p‐CLA, respectively. The molar absorptivity and Sandell sensitivity were calculated to be 1.83×10³ and 1.12×10³ L·mol^?1·cm^?1, and 2.60 and 3.40 ng·cm^?2 using DDQ and p‐CLA, respectively. The limits of detection and quantification were calculated to be (7.42 and 6.73) and (9.94 and 4.13) µg·mL^?1 using DDQ and p‐CLA, respectively. The proposed methods were successfully applied to the determination of ABZ in commercially available dosage forms. The reliability of the assays was established by parallel determination by the official method and recovery studies. The chemical structures of the solid charge‐transfer (CT) complexes formed via reaction between ABZ under study and Π‐acceptors, have been elucidated using elemental analyses (C, H and N), IR, ¹H NMR and mass spectra.     

Mechanism for the Nonadiabatic Photooxidation of Benzene to Phenol: Orientation‐Dependent Proton‐Coupled Electron Transfer

An efficient catalytic one‐step conversion of benzene to phenol was achieved recently by selective photooxidation under mild conditions with 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ) as the photocatalyst. Herein, high‐level electronic structure calculations in the gas phase and in acetonitrile solution are reported to explore the underlying mechanism. The initially populated ¹ππ* state of DDQ can relax efficiently through a nearby dark ¹nπ* doorway state to the ³ππ* state of DDQ, which is found to be the precursor state involved in the initial intermolecular electron transfer from benzene to DDQ. The subsequent triplet‐state reaction between DDQ radical anions, benzene radical cations, and water is computed to be facile. The formed DDQH and benzene‐OH radicals can undergo T₁→S₀ intersystem crossing and concomitant proton‐coupled electron transfer (PCET) to generate the products DDQH₂ and phenol. Two of the four considered nonadiabatic pathways involve an orientation‐dependent triplet PCET process, followed by intersystem crossing to the ground state (S₀). The other two first undergo a nonadiabatic T₁→S₀ transition to produce a zwitterionic S₀ complex, followed by a barrierless proton transfer. The present theoretical study identifies novel types of nonadiabatic PCET processes and provides detailed mechanistic insight into DDQ‐catalyzed photooxidation.     

Solvent‐Free One‐Step Photochemical Hydroxylation of Benzene Derivatives by the Singlet Excited State of 2,3‐Dichloro‐5,6‐dicyano‐p‐benzoquinone Acting as a Super Oxidant

Photoinduced hydroxylation of neat deaerated benzene to phenol occurred under visible‐light irradiation of 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ), which acts as a super photooxidant in the presence of water. Photocatalytic solvent‐free hydroxylation of benzene derivatives with electron‐withdrawing substituents such as benzonitrile, nitrobenzene, and trifluoromethylbenzene used as neat solvents has been achieved for the first time by using DDQ as a super photooxidant to yield the corresponding phenol derivatives and 2,3‐dichloro‐5,6‐dicyanohydroquinone (DDQH₂) in the presence of water under deaerated conditions. In the presence of dioxygen and tert‐butyl nitrite, the photocatalytic hydroxylation of neat benzene occurred with DDQ as a photocatalyst to produce phenol. The photocatalytic reactions are initiated by oxidation of benzene derivatives with the singlet and triplet excited states of DDQ to form the corresponding radical cations, which associate with benzene derivatives to produce the dimer radical cations, which were detected by the femto‐ and nanosecond laser flash photolysis measurements to clarify the photocatalytic reaction mechanisms. Radical cations of benzene derivatives react with water to yield the OH‐adduct radicals. On the other hand, DDQ ^{. ?} produced by the photoinduced electron transfer from benzene derivatives reacts with the OH‐adduct radicals to yield the corresponding phenol derivatives and DDQH₂. DDQ is recovered by the reaction of DDQH₂ with tert‐butyl nitrite when DDQ acts as a photocatalyst for the hydroxylation of benzene derivatives by dioxygen.     

Effect of solvent on the dehydrogenation of poly(1,3‐cyclohexadiene): Formation and characteristics of benzoquinone–aromatic hydrocarbon charge‐transfer complexes

The effect of solvent on the dehydrogenation of poly(1,3‐cyclohexadiene) (PCHD) with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) [or 2,3,5,6‐tetrachloro‐1,4‐(p‐)‐benzoquinone (TCQ)] was examined to improve the reactivity of benzoquinones for this dehydrogenation reaction. The dehydrogenation of PCHD with DDQ (or TCQ) was strongly affected by the type of solvent, and aromatic hydrocarbon based solvents were appropriate for this dehydrogenation reaction. A charge‐transfer complex between DDQ (or TCQ) and aromatic hydrocarbons was formed in the reaction mixture, and the reactivity of the complex was much higher than that of free DDQ (or TCQ). The formation of a DDQ–aromatic hydrocarbon complex, which has a large diamagnetic shift of the ¹³C NMR signals with respect to DDQ, was the primary factor for improvement of the reactivity of DDQ. For the TCQ–aromatic hydrocarbon complex, the existence of an electron‐withdrawing group on the aromatic hydrocarbon was the major factor for improvement of the reactivity of TCQ. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 342–350, 2010     

Solvent‐Free Photooxidation of Alkanes by Dioxygen with 2,3‐Dichloro‐5,6‐dicyano‐p‐benzoquinone via Photoinduced Electron Transfer

Photooxidation of alkanes by dioxygen occurred under visible light irradiation of 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ) which acts as a super photooxidant. Solvent‐free hydroxylation of cyclohexane and alkanes is initiated by electron transfer from alkanes to the singlet and triplet excited states of DDQ to afford the corresponding radical cations and DDQ^??, as revealed by femtosecond laser‐induced transient absorption measurements. Alkane radical cations readily deprotonate to produce alkyl radicals, which react with dioxygen to afford alkylperoxyl radicals. Alkylperoxyl radicals abstract hydrogen atoms from alkanes to yield alkyl hydroperoxides, accompanied by regeneration of alkyl radicals to constitute the radical chain reactions, so called autoxidation. The radical chain is terminated in the bimolecular reactions of alkylperoxyl radicals to yield the corresponding alcohols and ketones. DDQ^??, produced by the photoinduced electron transfer from alkanes to the excited state of DDQ, disproportionates with protons to yield DDQH₂.     

From Homoconjugated Push–Pull Chromophores to Donor–Acceptor‐Substituted Spiro Systems by Thermal Rearrangement

Series of homoconjugated push–pull chromophores and donor–acceptor (D–A)‐functionalized spiro compounds were synthesized, in which the electron‐donating strength of the anilino donor groups was systematically varied. The structural and optoelectronic properties of the compounds were investigated by X‐ray analysis, UV/Vis spectroscopy, electrochemistry, and computational analysis. The homoconjugated push–pull chromophores with a central bicyclo[4.2.0]octane scaffold were obtained in high yield by [2+2] cycloaddition of 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ) to N,N‐dialkylanilino‐ or N,N‐diarylanilino‐substituted activated alkynes. The spirocyclic compounds were formed by thermal rearrangement of the homoconjugated adducts. They also can be prepared in a one‐pot reaction starting from DDQ and anilino‐substituted alkynes. Spiro products with N,N‐diphenylanilino and N,N‐diisopropylanilino groups were isolated in high yields whereas compounds with pyrrolidino, didodecylamino, and dimethylamino substituents gave poor yields, with formation of insoluble side products. It was shown by in situ trapping experiments with TCNE that cycloreversion is possible during the thermal rearrangement, thereby liberating DDQ. In the low‐yielding transformations, DDQ oxidizes the anilino species present, presumably via an intermediate iminium ion pathway. Such a pathway is not available for the N,N‐diphenylanilino derivative and, in the case of the N,N‐diisopropylanilino derivative, would generate a strained iminium ion (A1,3 strain). The mechanism of the thermal rearrangement was investigated by EPR spectroscopy, which provides good evidence for a proposed biradical pathway starting with the homolytic cleavage of the most strained (CN)C?C(CN) bond between the fused four‐ and six‐membered rings in the homoconjugated adducts.     

Synthesis of N‐Substituted‐6‐alkoxypteridin‐4‐amine

A novel seven‐step methodology for the synthesis of N‐substituted‐6‐alkoxypteridin‐4‐amine has been developed with the total yields of 35.4–41%. Twenty new compounds were synthesized by heterocyclization of easily prepared 3‐amino‐6‐bromopyrazine‐2‐carboxamide, subsequent alkoxylation, chlorination, and nucleophilic substitution. Their structures were confirmed by ¹H‐NMR, ¹³C‐NMR, ESI‐MS, and elemental analysis. The structure of N‐(3‐chloro‐4‐fluorophenyl)‐6‐ethoxypteridin‐4‐amine was further determined by X‐ray crystallographic analysis. It was found that different chlorinating reagents gave different products. The possible chlorination mechanism was discussed.     

Development and Validation of Selective Spectrophotometric Methods for the Determination of Pregabalin in Pharmaceutical Preparation

Three simple, quick and sensitive methods are described for the spectrophotometric determination of pregabalin (Pgb) in pharmaceutical preparations. Among them, the first two methods are based on the reaction of Pgb as n-electron donors with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π-acceptors to give highly colored complex species. The colored products were quantitated spectrophotometrically at 494 and 841 nm for DDQ and TCNQ, respectively. Optimization of the different experimental conditions was conducted. Beer’s law was obeyed in the concentration ranges 2.0—30.0 and 1.5—10 µg•mL－1 for DDQ and TCNQ methods, respectively. The third method is based on the interaction of ninhydrin (NN) with primary amine present in the pregabaline. This reaction produces a blue coloured product in N,N-dimethylformamide (DMF) medium, which absorbs maximally at 573 nm. Beer’s law was found in the concentration range 40.0—180.0 μg•mL－1. The methods were applied successfully to the determination of this drug in pharmaceutical dosage forms.     

Spectroscopic and Electrochemical Evaluation of Salt Effects on Electron‐Transfer Equilibria between Donor/Acceptor and Ion‐Radical Pairs in Organic Solvents

Addition of “inert” tetrabutylammonium hexafluorophosphate (Bu₄NPF₆) to a solution of TMDO/DDQ in dichloromethane (where TMDO= 2,2,6,6‐tetramethylbenzo[1,2‐d;4,5‐d]bis[1,3]‐dioxole, donor, and DDQ= diclorodicyano‐p‐benzoquinone, acceptor) is accompanied by drastic changes in the electronic spectrum, which are related to the appearance of the DDQ ^{? .} and TMDO ^+. ion radicals and a decrease in the concentration of the neutral molecules and the charge‐transfer complex [ TMDO,DDQ ]. These changes point to a considerable rise (of about three orders of magnitude) in the apparent electron‐transfer equilibrium constant (K_ET) for this donor/acceptor pair upon increasing the electrolyte concentration from 0 to 0.5 M . Accordingly, the ion‐radical fractions and K_ET values are higher in dichloromethane, at high electrolyte concentrations, than in acetonitrile (where the effect of Bu₄NPF₆ is less pronounced). Similar trends of the apparent equilibrium constants are observed for the tetramethyl‐p‐phenylenediamine/tetracyanoethylene pair. Electron‐transfer equilibrium constants for both donor/acceptor dyads obtained from spectral measurements are related to those derived from the redox potentials of the reactants. The effects of media variations on the electron‐transfer equilibria are discussed within the ion‐pairing and ionic‐activity frameworks.     

A DFT study of hydride transfers to the carbonyl oxygen of DDQ

Hydride‐transfer reactions between benzylic substrates and 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) were investigated by DFT (density functional theory) calculations. The lowest unoccupied molecular orbital of DDQ has the largest extension on two carbonyl oxygens, which comes from two‐step mixing of antisymmetric orbitals of fragment π MOs. Transition‐state (TS) geometries and activation energies of reactions of four benzylic substrates R²? CH₂‐para‐C₆H₄? R¹ (R¹, R² = H and/or OCH₃) with DDQ were calculated. M06‐2X/6‐311(+*)G* was found to be a practical computational method, giving energies and geometries similar to those of M06‐2X/6‐311++G(3df,2pd) and wB97xD/6‐311++G(3df,2pd). For toluene (R¹ = R² = H), an initiation‐propagation model was suggested, and the calculated kinetic isotope effect k(H)/k(D) = 5.0 with the tunnel correction at the propagating step is in good agreement with the experimental value 5.2. A reaction of para‐MeO? C₆H₄? CH₂(OMe) + DDQ + (H₂O)₁₄ → para‐MeO? C₆H₄? C(?O)H + HOMe + DDQH₂ + (H₂O)₁₃ was investigated by M06‐2X/6‐311(+*)G*. Four elementary processes were found and the hydride transfer (TS1) is the rate‐determining step. The hydride transfer was promoted by association with the water cluster. The size of the water cluster, (H₂O)_n, at TS1 was examined. Three models of n = 14, 20, and 26 were found to give similar activation energies. Metal‐free neutral hydride transfers from activated benzylic substrates to DDQ were proposed to be ready processes both kinetically and thermodynamically. © 2015 Wiley Periodicals, Inc.     

Gold‐catalyzed Reactions of 3‐Alkynyloxireno[2, 3‐b]chromenones to Form 3(2H)‐Furanones via a Domino Pathway

3(2H)‐Furanones are efficiently generated from 3‐alkynyl oxireno[2,3‐b]chromenones by an Au/DDQ‐catalyzed domino reaction through a pathway composed of cyclization, C? C cleavage, nucleophilic addition, oxidation, and nucleophilic addition. It was found that stoichiometric AuCl₃ or catalytic Au with stoichiometric DDQ can oxidize the benzylic sp³ C? H bond to facilitate nucleophilic addition.     

Spectrophotometric determination of ciprofloxacin in pure form and in tablets through charge-transfer complexation reactions

Three simple, quick and sensitive spectrophotometric methods are described for the determination of ciprofloxacin. The methods are based on the reaction of this drug as ann-electron donor with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), 7,7,8,8,-tetracyanoquinodimethane (TCNQ) andp-chloranil (CL) as -acceptors to give highly coloured complex species. The coloured products are quantitated spectrophotometrically at 460, 843 and 550 nm for DDQ, TCNQ and CL, respectively. Optimization of the different experimental conditions is described. Beer's law is obeyed in the concentration ranges 5–50, 1.5–15 and 20–200 g ml^–1 ciprofloxacin, but the concentration ranges for best accuracy are 10–48, 2.5–15 and 35– 195 g ml^–1 of drug for DDQ, TCNQ and CL, respectively. The relative standard deviations are less than 1.5%. Applications of the suggested methods to ciprofloxacin tablets are presented and compared with the USP method. The stability constants of the 11 DDQ and CL complexes were 1.086 × 10⁴ and 2.581 × 10⁴ lmol^–1, respectively, whereas for the 12 TCNQ complex it was 3.62 × 10⁸1. mol^–1.     

The bis(ethylenedithio)tetrathiafulvalene‐based ionic charge‐transfer complex with 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone

In the ionic charge‐transfer (CT) complex composed of bis(ethylenedithio)tetrathiafulvalene (ET) and 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ), C₁₀H₈S₈·C₈Cl₂N₂O₂, the donor and acceptor molecules both form centrosymmetric dimers associated by strong face‐to‐face π–π interactions. The disordered DDQ molecules form a one‐dimensional π‐stacked column, while the ET molecules form a two‐leg ladder through additional short S...S contacts between adjacent π–π‐bonded dimers. The crystal structure of ET–DDQ revealed in this study will provide a valuable example of the two‐leg spin ladder system, which has rarely been reported for ET‐based CT complexes.     

Dithiolopyranthione Synthesis,Spectroscopy, and an Unusual Reactivity with DDQ

The bicyclic pyran thiolone tetrahydro‐3αH‐[1,3]dithiolo[4,5‐β]pyran‐2‐thione ( 3a ) engages in a highly unusual fragmentation in the presence of DDQ. The pyran thiolone, 3a , was synthesized by chlorination of 3,4‐dihydro‐2H‐pyran ( 1 ) followed by condensing with CS₂ and NaSH. Reaction of 3a with DDQ generates the isomerized pyran thiolone tetrahydro‐3αH‐[1,3]dithiolo[4,5‐β]pyran‐2‐thione ( 3b ) and 4‐benzyl‐5‐(3‐hydroxypropyl)‐1,3‐dithiole‐2‐thione ( 4 ) via a deep‐seated rearrangement. The identity of 3b was confirmed by single crystal X‐ray analysis: P2₁/c, a = 5.807(9) Å, b = 12.99(2) Å, c = 11.445(15), β = 113.23(6)°. Mechanistic experiments and computational insight is used to explain the likely sequence of events in the highly unusual formation of 4 . Collectively, these results establish fundamental reactivity patterns for further research in this area.     

Alternating copolymerization of 2,3-dichloro-5,6-dicyano-p-benzoquinone with styrene and polymerization behavior with vinyloxy compounds

2,3-Dichloro-5,6-dicyano-p-benzoquinone (DDQ) was found to copolymerize alternatingly with styrene (St). DDQ–isobutyl vinyl ether and DDQ–2-chloroethyl vinyl ether systems gave homopolymers of vinyl ethers, while DDQ–phenyl vinyl ether and DDQ–vinyl acetate systems gave oligomers containing both monomer units. In the terpolymerization of DDQ, p-chloranil (pCA), and St, terpolymers obtained were found to have about 50 mole % of St units regardless of monomer feed ratio and DDQ was incorporated much more rapidly into the terpolymer than pCA. The difference in the reactivity of the acceptor monomers could be attributed to that in their electron-accepting character.     

Complementary Iron(II)‐Catalyzed Oxidative Transformations of Allenes with Different Oxidants

Substituent‐ and oxidant‐dependent transformations of allenes are described. Given the profound influence of the substituent on the reactivity of allenes, the subtle differences in allene structures are manifested in the formation of diverse products when reacted with different electrophiles/oxidants. In general, reactions of nonsilylated allenes involve an allylic cation intermediate by forming a C?O bond, at the sp‐hybridized C2, with either DDQ (2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone) or TBHP (tert‐butyl hydroperoxide), along with FeCl₂?4 H₂O (10 mol %). In contrast, silylated allenes favor the formation of propargylic cation intermediates by transferring the allenic hydride to the oxidant, thus generating 1,3‐enynes (E1 product) or propargylic THBP ethers (S_N1 product). The formation of these different putative cationic intermediates from nonsilylated and silylated allenes is strongly supported by DFT calculations.     

Report on an Unusual Cascade Reaction between Azulenes and 2,3‐Dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐Dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ)

The oxidation of 1‐(3,8‐dimethylazulen‐1‐yl)alkan‐1‐ones 1 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ) in acetone/H₂O mixtures at room temperature does not only lead to the corresponding azulene‐1‐carboxaldehydes 2 but also, in small amounts, to three further products (Tables 1 and 2). The structures of the additional products 3 – 5 were solved spectroscopically, and that of 3a also by an X‐ray crystal‐structure analysis (Fig. 1). It is demonstrated that the bis(azulenylmethyl)‐substituted DDQ derivatives 5 yield on methanolysis or hydrolysis precursors, which in a cascade of reactions rearrange under loss of HCl into the pentacyclic compounds 3 (Schemes 4 and 7). The found 1,1′‐[carbonylbis(8‐methylazulene‐3,1‐diyl)]bis[ethanones] 4 are the result of further oxidation of the azulene‐1‐carboxaldehydes 2 to the corresponding azulene‐1‐carboxylic acids (Schemes 9 and 10).     

Seven- and eight-membered heterocyclic biaryl synthesis through a metal-free oxidative coupling reaction

A metal-free intramolecular biaryl coupling mediated by DDQ and BF₃·OEt₂ was developed. The reaction proceeds smoothly at room temperature to give seven- and eight-membered heterocyclic biaryl compounds in up to 95% yields. Only 1 equiv of DDQ sufficed for the reaction, obviating the use of a large excess of oxidants and undesired chlorination pathway in metal-mediated process.     

Synthesis and bulk characterization of new P(CB‐b‐S) diblock copolymers

Strongly asymmetric chlorinated polybutadiene‐b‐polystyrene, [P((CB)_x‐b‐(PS)_y)] diblock copolymers with increasing x/(x + y) ratios (up to 5.2 mol %) have been synthesized by the selective chlorination of the polybutadiene (PB) block in solution. Chlorination has been performed in anhydrous dichloromethane added with an antioxidant [2,2′‐methylenebis‐(6‐tert‐butyl‐4‐methyl‐phenol)], at −50°C, under a continuous Ar flow and in the dark. Under the optimized experimental conditions, the PB chlorination is not complete, but the PS block is left unmodified. Even in the presence of a large chlorine excess (Cl₂/butene unit molar ratio of 2.5), the experimental degree of chlorination of homo PB does not exceed 85%. The chlorinated copolymers have been characterized by ¹H‐NMR, IR spectroscopy, size‐exclusion chromatography, and elemental analysis. The chlorinated copolymers have also been studied by DSC and SAXS after annealing at 150°C. Although at this temperature the parent homopolymers are immiscible, no microphase separation has been observed for the block copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 233–244, 1999     

EPR Study on the Complex Formed by Charge‐Transfer Process between Ground‐state Acceptor 2, 3‐Dicyano‐5, 6‐dichloro‐1, 4‐benzoquinone and Some Donors and on Cation Radical of Perylene (or Pyrene)

EPR study showed that the semi‐quinone radical anion of 2,3‐dicyano‐5,6‐dichloro‐1,4‐benzoquinone (DDQ) was formed in a charge transfer process between ground‐state DDQ as acceptor and each one of following ground state donors, i.e., 4‐methyl‐4′‐tridecyl‐2, 2′‐bipyridyl; 4‐methyl‐4′‐nonyl‐2, 2′‐bipyridyl; bis (2,2′‐bipyridyl) (4‐methyl‐4′‐heptadecyl‐2, 2′‐bipyridyl)ruthenium(2+) perchlorate and perylene. EPR study also showed that there are perylene cation radical and pyrene cation radical in the following experimental conditions: (a) in 98% sulfuric add. (b) 10^?3 mol/L perylene (or pyrene) was dissolved in trifluoroacetic acid‐nitrobenzene (1: 1 V/V).