Pictet–Spengler Synthesis of Quinoline‐Fused Porphyrins and Phenanthroline‐Fused Diporphyrins

Doubly and quadruply quinoline‐fused porphyrins were effectively synthesized through a reaction sequence consisting of Suzuki–Miyaura coupling of β‐borylated porphyrins with 2‐iodoaniline and subsequent Pictet–Spengler cyclization. These quinoline‐fused porphyrins display red‐shifted absorption bands and higher electron‐accepting abilities. This synthetic protocol also allowed the synthesis of phenanthroline‐fused porphyrin dimers, which bound either a Ni^II or Zn^II cation. The resultant metal complexes displayed further red shifted absorption spectra and molecular twists to effect an almost perpendicular arrangement of the two porphyrins.     

Synthesis,Structures, and Near‐IR Absorption of Heterole‐Fused Earring Porphyrins

A reaction sequence of regioselective peripheral bromination, Suzuki–Miyaura coupling with 2‐borylated thiophene or pyrrole, and oxidative ring‐closure with FeCl₃ allowed the synthesis of heterole‐fused earring porphyrins 4Pd and 9Pd from the parent earring porphyrin 1 . Differently pyrrole‐fused porphyrins 5H and 6H and their Pd^II complexes 5Pd and 6Pd were also synthesized. The structures of 4Pd , 5H, 6Pd , and 8Pd have been revealed by X‐ray analysis to be slightly twisted owing to constraints imposed by heterole‐fused structures. 5Pd exhibits an intensified band at 1505 nm, while 4Pd and 9Pd display small but remarkably red‐shifted absorption bands reaching around 2200 nm.     

Synthesis,Structures, and Near‐IR Absorption of Heterole‐Fused Earring Porphyrins

A reaction sequence of regioselective peripheral bromination, Suzuki–Miyaura coupling with 2‐borylated thiophene or pyrrole, and oxidative ring‐closure with FeCl₃ allowed the synthesis of heterole‐fused earring porphyrins 4Pd and 9Pd from the parent earring porphyrin 1 . Differently pyrrole‐fused porphyrins 5H and 6H and their Pd^II complexes 5Pd and 6Pd were also synthesized. The structures of 4Pd , 5H, 6Pd , and 8Pd have been revealed by X‐ray analysis to be slightly twisted owing to constraints imposed by heterole‐fused structures. 5Pd exhibits an intensified band at 1505 nm, while 4Pd and 9Pd display small but remarkably red‐shifted absorption bands reaching around 2200 nm.     

Directly Diphenylborane‐Fused Porphyrins

Mono‐ and bis(diphenylborane)‐fused porphyrins were synthesized from the corresponding β‐(2‐trimethylsilylphenyl)‐substituted porphyrins through the sequence of Si–B exchange reaction, intramolecular bora‐Friedel–Crafts reaction, and ring‐closing Si–B exchange reaction. Effective electronic interactions of the empty p‐orbital of the boron atom with the porphyrin π‐circuit lead to red‐shifted absorption spectra and substantially decreased LUMO energy levels. Pyridine adds at the boron center to cause disruption of the electronic interaction of the boron atom with large association constants (1.9–17×10⁴ m ^?1) depending on the central metal at the porphyrin. The Zn^II complex behaved as a hetero‐dinuclear Lewis acid, exhibiting regioselective binding of pyridines at the boron or the zinc center.     

Porphyrins Fused to N‐Heterocyclic Carbenes (NHCs): Modulation of the Electronic and Catalytic Properties of NHCs by the Central Metal of the Porphyrin

We report herein a detailed study of the use of porphyrins fused to imidazolium salts as precursors of N‐heterocyclic carbene ligands 1 M . Rhodium(I) complexes 6 M – 9 M were prepared by using 1 M ligands with different metal cations in the inner core of the porphyrin (M=Ni^II, Zn^II, Mn^III, Al^III, 2H). The electronic properties of the corresponding N‐heterocyclic carbene ligands were investigated by monitoring the spectroscopic changes occurring in the cod and CO ancillary ligands of [( 1 M )Rh(cod)Cl] and [( 1 M )Rh(CO)₂Cl] complexes (cod=1,5‐cyclooctadiene). Porphyrin–NHC ligands 1 M with a trivalent metal cation such as Mn^III and Al^III are overall poorer electron donors than porphyrin–NHC ligands with no metal cation or incorporating a divalent metal cation such as Ni^II and Zn^II. Imidazolium salts 3 M (M=Ni, Zn, Mn, 2H) have also been used as NHC precursors to catalyze the ring‐opening polymerization of L ‐lactide. The results clearly show that the inner metal of the porphyrin has an important effect on the reactivity of the outer carbene.     

Synthesis and properties of hybrid porphyrin tapes

Hybrid porphyrin tapes 3 and 4 , consisting of a mixture of 3,5‐di‐tert‐butylphenyl‐substituted donor‐type Zn^II–porphyrins and pentafluorophenyl‐substituted acceptor‐type Zn^II–porphyrins, were prepared by a synthetic route involving cross‐condensation reaction of a Ni^II–porphyrinyldipyrromethane and pentafluorophenyldipyrromethane with pentafluorobenzaldehyde followed by appropriate demetalation, remetalation, and oxidative ring‐closure reaction. The Ni^II‐substituted porphyrin tapes 5 (Ni‐Zn‐Ni) and 6 (Ni‐H₂‐Ni) were also prepared through similar routes. The hybrid porphyrin tapes 3 and 4 are more soluble and more stable than normal porphyrin tapes 1 and 2 consisting of only donor‐type Zn^II–porphyrins. The solid‐state and crystal packing structures of 3 , 4 , and 5 were elucidated by single‐crystal X‐ray diffraction analysis. Singly meso–meso‐linked hybrid porphyrin arrays 12 and 14 exhibit redox potentials that roughly correspond to each constituent porphyrin segments, while the redox potentials of the hybrid porphyrin tapes 3 and 4 are positively shifted as a whole. The two‐photon absorption (TPA) values of 1–6 were measured by using a wavelength‐scanning open aperture Z‐scan method and found to be 1900, 21 000, 2200, 27 000, 24 000, and 26 000 GM, respectively. These results illustrate an important effect of elongation of π‐electron conjugation for the enhancement of TPA values. The hybrid porphyrin tapes show slightly larger TPA values than the parent ones.     

Opp‐Dibenzoporphyrins as a Light‐Harvester for Dye‐Sensitized Solar Cells

New opp‐dibenzoporphyrins were prepared in a concise method that was based on a Pd⁰‐catalyzed cascade reaction. These porphyrins, which contained carboxylic‐acid linker groups on benzene rings that were fused to the porphyrin at their β,β′‐positions, were examined as sensitizers for dye‐sensitized solar cells for the first time. Whereas all of the porphyrins showed solar‐energy‐to‐electricity conversion, an opp‐dibenzoporphyrin with conjugated carboxylic‐acid linkers displayed the highest conversion efficiency and an exceptionally high J_sc value. Cyclic voltammetry of these porphyrins suggested that the fusion of two aromatic benzene rings onto the periphery of the porphyrin lowered the HOMO–LUMO energy gap; the incorporation of a conjugated carboxylic‐acid linker group decreased the HOMO–LUMO gap even further. These CV data are consistent with DFT calculations for these porphyrins and agree well with the UV/Vis absorption‐ and fluorescence spectra of these porphyrins.     

Strategic Construction of Directly Linked Porphyrin–BODIPY Hybrids

A powerful and concise synthesis of directly linked porphyrin‐BODIPY hybrids has been demonstrated, which consists of condensation of directly linked meso ‐pyrroyl Ni^II‐porphyrin with arylaldehyde, oxidation with p ‐chloranil, and complexation with BF₃⋅Et₂O. Synthesized hybrids include porphyrin dimer 6Ni , trimers 8Ni , 9Ni , tetramer 12Ni , pentamer 16Ni , hexamer 13Ni , and nonamers 17Ni and 18Ni . The structures of 6Ni , 9Ni and 12Ni were unambiguously confirmed by X‐ray diffraction analysis. Some Ni^II porphyrins were effectively converted to the corresponding Zn^II porphryins. In these hybrids, the pigments are three‐dimensionally arranged with a face‐to‐face dimeric porphyrin unit in a well‐defined manner, featuring their potential as light‐harvesting antenna and functional hosts.     

Synthesis and Characterization of β—Cyclodextrin Bonded Metal Porphyrins

Reactions of 5-(p-aminophenyl)-10,15,20-triphenyl porphyrin (1) with Ru3(CO)12 or M(OCOCH3)2 (M=Ni,Mn) afforded metalloporphyrins(4-6),respectively.6-Deoxy-6-io-do-β-cyclodextrin(2) and mono(6-O-trifluoromethanesulfonyl) permethylated β-cyclodextrin(3) reacted with complexes 4-6 to give β-cyclodextrin bonded metal porphyrins (7-9) and permethylated β-cyclodextrin bonded me-tal porphyrins (10-12) respectively.These new complexes were identified by MS,IR,UV-visible and ^1H NMR spectra,and elemental analysis.     

Synthesis and Aggregation Behavior of Chiral Naphthoquinoline Petroporphyrin Asphaltene Model Compounds

The synthesis of structurally relevant compounds that model the chemical behavior and supramolecular aggregation of the asphaltenes, the most polar and metal‐rich fraction of heavy petroleum, has been extended to include fusions of important petroleum biomarkers. The synthetic protocol features a multicomponent reaction to form a dyad composed of a fused steroidal naphthoquinoline, followed by a pyrrole cyclocondensation reaction to incorporate the dyad into a chiral triad containing a Ni^II‐porphyrin substituent. This synthetic protocol has been used to prepare large molecules that represent both “continental” and “archipelago” models of asphaltene composition. The steroid–naphthoquinoline–porphyrin triads have been studied by UV/Vis and circular dichroism (CD) spectroscopies, and the results suggest that the naphthoquinoline core, a tetrahydro[4]helicene, adopts a helical conformation, producing a CD signal electronically related to the characteristic Soret absorption band of the porphyrin subunit. Finally, supramolecular aspects of asphaltene aggregation have been examined on a molecular level through analysis of axial coordination of pyridine to the Ni‐porphyrin. The relative affinity of pyridine for binding to the Ni center of the porphyrin is evaluated by comparing binding propensities in a series of sterically differentiated substituted porphyrins.     

Conductive Fused Porphyrin Tapes on Sensitive Substrates by a Chemical Vapor Deposition Approach

Oxidative polymerization of nickel(II) 5,15‐diphenyl porphyrin and nickel(II) 5,15‐bis(di‐3,5‐tert‐butylphenyl) porphyrin by oxidative chemical vapor deposition (oCVD) yields multiply fused porphyrin oligomers in thin film form. The oCVD technique enables one‐step formation, deposition, and p‐doping of conjugated poly(porphyrins) coatings without solvents or post‐treatments. The decisive reactions and side reactions during the oCVD process are shown by high‐resolution mass spectrometry. Owing to the highly conjugated structure of the fused tapes, the thin films exhibit an electrical conductivity of 3.6×10^?2 S cm^?1 and strong absorption in the visible to near‐infrared spectral region. The formation of smooth conjugated poly(porphyrins) coatings, even on sensitive substrates, is demonstrated by deposition and patterning on glass, silicon, and paper. Formation of conductive poly(porphyrins) thin films could enable the design of new optoelectronic devices using the oCVD approach.     

Effect of the inclination angles on thermal energy storage in a quadrantal cavity

A free-base tetra sodium meso-tetra (p-sulphonatophenyl) porphyrin (TPPS₄) and its corresponding metalloporphyrins (MTPPS₄), where M?=?Co, Ni and Zn were synthesized and characterized by UV?Cvisible spectroscopy, infra red spectroscopy and ¹H nmr spectroscopy. Thermal studies of these porphyrins were conducted in synthetic air from room temperature to 800?°C. The residues of MTPPS₄ were qualitatively analyzed which showed the presence of corresponding metal oxides and Na₂SO₄. Further, the above porphyrins were subjected to TG-EGA-MS analysis in argon atmosphere to study the evolved gases/species during the thermal events. This information is useful to know the ring opening sequence of these porphyrins at corresponding temperatures.     

A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Synthesis of Di‐peri‐dinaphthoporphyrins by PtCl2‐Mediated Cyclization of Quinodimethane‐type Porphyrins

Di‐peri‐dinaphthoporphyrins can be regarded as a key and common substructure of fused porphyrinoids. PtCl₂‐mediated cycloisomerization reaction of quinodimethane‐type porphyrins provided these doubly fused porphyrins, which exhibit characteristic paratropic ring currents that presumably arise from 24π antiaromatic circuit as a dominant resonance contributor. UV/Vis absorption spectra, cyclic voltammetry, and excited‐state dynamics as well as theoretical calculation support this conclusion.     

A Quadruply Bridged Non-Offset Face-to-Face Porphyrin Dimer and Cross-Shaped Pentameric Porphyrin Tapes Based on 2,7,12,17-Tetrakis(pinacolatoboryl) NiII Porphyrin

2,7,12,17-Tetrakis(pinacolatoboryl) Ni^II porphyrin 5 Ni was synthesized in 75 % yield by Ir-catalyzed borylation of porphine followed by Ni^II metalation and has been demonstrated to be a useful synthon, giving 2,7,12,17-tetraaryated Ni^II porphyrins 6 a – d , peripherally octaarylated Ni^II porphyrins 8 a – d , quadruply bridged face-to-face non-offset Ni^II-porphyrin dimer 12 , and cross-shaped β-meso singly linked porphyrin pentamers and nonamers. Oxidation of cross-shaped β-meso singly linked porphyrin pentamers 14 Ni and 14 Zn gave fused pentameric tapes 15 Ni and 15 Zn . The structures of 12 , 14 Zn , and 15 Ni have been revealed by X-ray diffraction analysis. Optical separation of 12 has been accomplished, showing a bisignate coupling pattern for exciton-coupled blue-shifted Soret band. Pentameric porphyrin tape 15 Zn exhibits a red-shifted absorption band at 1156 nm and seven reversible redox waves.     

Molecular weight control of polyethylene waxes using a constrained imino‐cyclopenta[b]pyridyl‐nickel catalyst

Five examples of nickel(II) bromide complexes bearing N,N‐imino‐cyclopenta[b ]pyridines, [7‐(ArN)‐6,6‐Me₂C₈H₅N]NiBr₂ (Ar = 2,6‐Me₂C₆H₃ ( Ni1 ), 2,6‐Et₂C₆H₃ ( Ni2 ), 2,6‐i‐ Pr₂C₆H₃ ( Ni3 ), 2,4,6‐Me₃C₆H₂ ( Ni4 ), 2,6‐Et₂‐4‐MeC₆H₂ ( Ni5 )), have been prepared by the reaction of the corresponding ligand, L1 – L5 , with NiBr₂(DME) (DME = 1,2‐dimethoxyethane). On crystallization from bench dichloromethane, Ni1 underwent adventitious reaction with water to give the aqua salt, [ L1 NiBr(OH₂)₃][Br] ( Ni1' ). The molecular structures of Ni1' and Ni3 have been structurally characterized, the latter revealing a bromide‐bridged dimer. On activation with either MMAO or Et₂AlCl, Ni1 , Ni2 , Ni4, and Ni5 , all exhibited high activities for ethylene polymerization (up to 3.88 × 10⁶ g(PE) mol^?1(Ni) h^?1); the most sterically bulky Ni3 gave only low activity. Polyethylene waxes are a feature of the materials obtained which typically display low molecular weights (M _ws), narrow M _w distributions and unsaturated vinyl and vinylene functionalities. Notably, the catalyst comprising Ni1 /Et₂AlCl produced polyethylene with the lowest M _w, 0.67 kg mol^?1, which is less than any previously reported data for any class of cycloalkyl‐fused pyridine–nickel catalyst. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3494–3505     

Versatile reactivity of half-sandwich Ir and Rh complexes toward carboranylamidinates and their derivatives: synthesis, structure, and catalytic activity for norbornene polymerization

Synthesis, structure, and reactivity of carboranylamidinate‐based half‐sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ‐Cl)Cl}₂] (M=Ir, Rh; Cp*=η⁵‐C₅Me₅) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18‐electron complexes [Cp*IrCl(Cab^N‐DIC)] ( 1 a ; Cab^N‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHiPr)]), [Cp*RhCl(Cab^N‐DIC)] ( 1 b ), and [Cp*RhCl(Cab^N‐DCC)] ( 1 c ; Cab^N‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHCy)]). A series of 16‐electron half‐sandwich Ir and Rh complexes [Cp*Ir(Cab^N′‐DIC)] ( 2 a ; Cab^N′‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NiPr)]), [Cp*Ir(Cab^N′‐DCC)] ( 2 b , Cab^N′‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NCy)]), and [Cp*Rh(Cab^N′‐DIC)] ( 2 c ) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab^N,S‐DIC)], [Cp*M(Cab^N,S‐DCC)] (M=Ir 3 a , 3 b ; Rh 3 c , 3 d ), formed through BH activation, are obtained by reaction of [{Cp*MCl₂}₂] with carboranylamidinate sulfides [RN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHR)]S^? (R=iPr, Cy), which can be prepared by inserting sulfur into the C? Li bond of lithium carboranylamidinates. Iridium complex 1 a shows catalytic activities of up to 2.69×10⁶ g_PNB ${{\rm{mol}}_{{\rm{Ir}}}^{ - {\rm{1}}} }Synthesis, structure, and reactivity of carboranylamidinate-based half-sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ-Cl)Cl}(2)] (M = Ir, Rh; Cp* = η(5)-C(5)Me(5)) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18-electron complexes [Cp*IrCl(Cab(N)-DIC)] (1?a; Cab(N)-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NHiPr)]), [Cp*RhCl(Cab(N)-DIC)] (1?b), and [Cp*RhCl(Cab(N)-DCC)] (1?c; Cab(N)-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10))(NHCy)]). A series of 16-electron half-sandwich Ir and Rh complexes [Cp*Ir(Cab(N')-DIC)] (2?a; Cab(N')-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NiPr)]), [Cp*Ir(Cab(N')-DCC)] (2?b, Cab(N')-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10)(NCy)]), and [Cp*Rh(Cab(N')-DIC)] (2?c) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab(N,S)-DIC)], [Cp*M(Cab(N,S)-DCC)] (M = Ir 3?a, 3?b; Rh 3?c, 3?d), formed through BH activation, are obtained by reaction of [{Cp*MCl(2)}(2)] with carboranylamidinate sulfides [RN=C(closo-1,2-C(2)B(10)H(10))(NHR)]S(-) (R = iPr, Cy), which can be prepared by inserting sulfur into the C-Li bond of lithium carboranylamidinates. Iridium complex 1?a shows catalytic activities of up to 2.69×10(6) g(PNB) mol(Ir)(-1) h(-1) for the polymerization of norbornene in the presence of methylaluminoxane (MAO) as cocatalyst. Catalytic activities and the molecular weight of polynorbornene (PNB) were investigated under various reaction conditions. All complexes were fully characterized by elemental analysis and IR and NMR spectroscopy; the structures of 1?a-c, 2?a, b; and 3?a, b, d were further confirmed by single crystal X-ray diffraction.