Photoswitched Cell Adhesion on Azobenzene‐Containing Self‐Assembled Films

Stimuli‐responsive surfaces that can regulate and control cell adhesion have attracted much attention for their great potential in diverse biomedical applications. Unlike for pH‐ and temperature‐responsive surfaces, the process of photoswitching requires no additional input of chemicals or thermal energy. In this work, two different photoresponsive azobenzene films are synthesized by chemisorption and electrostatic layer‐by‐layer (LbL) assembly techniques. The LbL film exhibits a relatively loose packing of azobenzene chromophores compared with the chemisorbed film. The changes in trans/cis isomer ratio of the azobenzene moiety and the corresponding wettability of the LbL films are larger than those of the chemisorbed films under UV light irradiation. The tendency for cell adhesion on the LbL films decreases markedly after UV light irradiation, whereas adhesion on the chemisorbed films decreases only slightly, because the azobenzene chromophores stay densely packed. Interestingly, the tendency for cell adhesion can be considerably increased on rough substrates, the roughness being introduced by use of photolithography and inductively coupled plasma deep etching techniques. For the chemisorbed films on rough substrates, the amount of cells that adhere also changes slightly after UV light irradiation, whereas, the amount of cells that adhere to LbL films on rough substrates decreases significantly.     

Reversible Layer‐by‐Layer Deposition on Solid Substrates Inspired by Mussel Byssus Cuticle

The protective coating on mussel (Mytilus galloprovincialis) byssus has attracted considerable research interest because of its excellent mechanical properties such as hardness and extensibility. These special properties are known to be highly related with specific interactions between mussel foot protein‐1 and metal ions. In particular, the complexation between catechols in mfp‐1 and iron(III) has been identified as a key interaction. This finding has given opportunities for pursuing promising applications. Herein, we report that emulating the properties of the mussel byssus cuticle provides an important platform for developing reversible layer‐by‐layer (LbL) deposition, an advanced technique for surface modification. LbL films were constructed on solid substrates by sequential immersion of substrates into solutions containing iron(III) and catecholic compounds. The thickness of the LbL films was effectively controlled by increasing the immersion steps, and the reversibility of the LbL deposition was demonstrated by addition of a chelating agent.     

Nanoparticulate Hollow TiO2 Fibers as Light Scatterers in Dye‐Sensitized Solar Cells: Layer‐by‐Layer Self‐Assembly Parameters and Mechanism

Hollow structures show both light scattering and light trapping, which makes them promising for dye‐sensitized solar cell (DSSC) applications. In this work, nanoparticulate hollow TiO₂ fibers are prepared by layer‐by‐layer (LbL) self‐assembly deposition of TiO₂ nanoparticles on natural cellulose fibers as template, followed by thermal removal of the template. The effect of LbL parameters such as the type and molecular weight of polyelectrolyte, number of dip cycles, and the TiO₂ dispersion (amorphous or crystalline sol) are investigated. LbL deposition with weak polyelectrolytes (polyethylenimine, PEI) gives greater nanoparticle deposition yield compared to strong polyelectrolytes (poly(diallyldimethylammonium chloride), PDDA). Decreasing the molecular weight of the polyelectrolyte results in more deposition of nanoparticles in each dip cycle with narrower pore size distribution. Fibers prepared by the deposition of crystalline TiO₂ nanoparticles show higher surface area and higher pore volume than amorphous nanoparticles. Scattering coefficients and backscattering properties of fibers are investigated and compared with those of commercial P25 nanoparticles. Composite P25–fiber films are electrophoretically deposited and employed as the photoanode in DSSC. Photoelectrochemical measurements showed an increase of around 50 % in conversion efficiency. By employing the intensity‐modulated photovoltage and photocurrent spectroscopy methods, it is shown that the performance improvement due to addition of fibers is mostly due to the increase in light‐harvesting efficiency. The high surface area due to the nanoparticulate structure and strong light harvesting due to the hollow structure make these fibers promising scatterers in DSSCs.     

Chemical Control of Yeast Cell Division by Cross‐Linked Shells of Catechol‐Grafted Polyelectrolyte Multilayers

The chemical control of cell division has attracted much attention in the areas of single cell‐based biology and high‐throughput screening platforms. A mussel‐inspired cytocompatible encapsulation method for achieving a “cell‐division control” with cross‐linked layer‐by‐layer (LbL) shells is developed. Catechol‐grafted polyethyleneimine and hyaluronic acid are chosen as polyelectrolytes for the LbL process, and the cross‐linking of polyelectrolytes is performed at pH 8.5. Cell division is controlled by the number of the LbL nanolayers and cross‐linking reaction. We also suggest a new measuring unit, , for quantifying “cell‐division timing” based on microbial growth kinetics.

     

Designing Visible Light‐Cured Thiol‐Acrylate Hydrogels for Studying the HIPPO Pathway Activation in Hepatocellular Carcinoma Cells

Various polymerization mechanisms have been developed to prepare peptide‐immobilized poly(ethylene glycol) (PEG) hydrogels, a class of biomaterials suitable for studying cell biology in vitro. Here, a visible light mediated thiol‐acrylate photopolymerization scheme is reported to synthesize dually degradable PEG‐peptide hydrogels with controllable crosslinking and degradability. The influence of immobilized monothiol pendant peptide is systematically evaluated on the crosslinking of these hydrogels. Further, methods are proposed to modulate hydrogel crosslinking, including adjusting concentration of comonomer or altering the design of multifunctional peptide crosslinker. Due to the formation of thioether ester bonds, these hydrogels are hydrolytically degradable. If the dithiol peptide linkers used are susceptible to protease cleavage, these thiol‐acrylate hydrogels can be designed to undergo partial proteolysis. The differences between linear and multiarm PEG‐acrylate (i.e., PEGDA vs PEG4A) are also evaluated. Finally, the use of the mixed‐mode thiol‐acrylate PEG4A‐peptide hydrogels is explored for in situ encapsulation of hepatocellular carcinoma cells (Huh7). The effects of matrix stiffness and integrin binding motif (e.g., RGDS) on Huh7 cell growth and HIPPO pathway activation are studied using PEG4A‐peptide hydrogels. This visible light poly­merized thiol‐acrylate hydrogel system represents an alternative to existing light‐cured hydrogel platforms and shall be useful in many biomedical applications.     

Metal–Organic‐Framework‐Templated Polyelectrolyte Nanocapsules for the Encapsulation and Delivery of Small‐Molecule–Polymer Conjugates

Herein, we report a strategy for exploiting nanoscale metal–organic frameworks (nano‐MOFs) as templates for the layer‐by‐layer (LbL) assembly of polyelectrolytes. Because small‐molecule drugs or imaging agents cannot be efficiently encapsulated by polyelectrolyte nanocapsules, we investigated two promising and biocompatible polymers (comb‐shaped polyethylene glycol (PEG) and hyperbranched polyglycerol‐based PEG) for the conjugation of model drugs and imaging agents, which were then encapsulated inside the nano‐MOF‐templated nanocapsules. Furthermore, we also systemically explored the release kinetics of the encapsulated conjugates, and examined how the encapsulation and/or release processes could be controlled by varying the composition and architecture of the polymers. We envision that our nano‐MOFs‐templated nanocapsules, through combining with small‐molecule–polymer conjugates, will represent a new type of delivery system that could open up new opportunities for biomedical applications.     

Layer‐by‐Layer Assembly: Recent Progress from Layered Assemblies to Layered Nanoarchitectonics

As an emerging concept for the development of new materials with nanoscale features, nanoarchitectonics has received significant recent attention. Among the various approaches that have been developed in this area, the fixed‐direction construction of functional materials, such as layered fabrication, offers a helpful starting point to demonstrate the huge potential of nanoarchitectonics. In particular, the combination of nanoarchitectonics with layer‐by‐layer (LbL) assembly and a large degree of freedom in component availability and technical applicability would offer significant benefits to the fabrication of functional materials. In this Minireview, recent progress in LbL assembly is briefly summarized. After introducing the basics of LbL assembly, recent advances in LbL research are discussed, categorized according to physical, chemical, and biological innovations, along with the fabrication of hierarchical structures. Examples of LbL assemblies with graphene oxide are also described to demonstrate the broad applicability of LbL assembly, even with a fixed material.     

Micropatterning and Impedance Characterization of an Electrically Percolating Layer‐by‐Layer Assembly

Micropatterned layer‐by‐layer (LbL) assemblies were studied as a potential platform for sensor applications by performing impedance characterization throughout a range of electrolyte concentrations. Conductive LbL thin films were prepared with carbon black nanoparticles dispersed in the polymer matrix to provide an electrically conductive network. LbL assemblies were micropatterned using a photolithographic lift‐off method, and a test circuit was constructed as multiple interdigitating coplanar electrodes. Impedance spectra were collected between 10⁴ and 10⁶ Hz within a flow cell containing NaCl solutions ranging from 0.001–1.0 M. These preliminary results demonstrate the ability to pattern conductive LbL composites and underscore the potential utility and shortcomings of their use in sensor applications.     

Molecularly Selective Regulation of Delivery Fluxes by Employing Supramolecular Interactions in Layer‐by‐Layer Films

The molecularly selective regulation of molecular fluxes in a biomaterial that delivers multiple chemical species simultaneously is still beyond the reach of materials scientists. A delivery material was developed by means of the layer‐by‐layer (LbL) technique. This material discriminatively regulates the delivery flux of bioactive small molecules, as represented by a peptide containing the RGD fragment and the chemotherapy drug doxorubicin (DOX). Molecularly selective flux regulations in LbL films are realized through fast, reversible supramolecular interactions between cyclodextrin and its guests. The mechanism underlining the delivery strategy is that supramolecular interactions promote molecular loading and slow down diffusion‐dependent release. In a preliminary survey of materials parameters, a maximum difference in cell viability between healthy human bronchial epithelial cells and cancer cells (A549) was realized.     

Reverse-phase LbL-encapsulation of highly water soluble materials by layer-by-layer polyelectrolyte self-assembly

We report on a novel method for the encapsulation of highly water soluble materials by using layer-by-layer (LbL) polyelectrolyte self-assembly. State of the art polyelectrolyte self-assembly LbL coating and encapsulation methods are only applicable to insoluble or poorly water soluble template materials, because the process is performed in water causing dissolution of the solid template. Our method extends the material spectrum to highly water soluble template materials by using non-ionized polyelectrolytes in an organic phase (reverse-phase) instead of polyelectrolyte salts in an aqueous environment. By using the reverse-phase layer-by-layer (RP-LbL) technique, we have demonstrated the direct encapsulation of proteins, glucose, vitamin C, and inorganic salts in the solid state. Multilayer deposition was proven, layer thickness was determined by AFM, and the advantage of the method to prepare powders of encapsulated materials was demonstrated. The method is simple, robust, and applicable to a broad range of substances with potential applications in several industries.     

Visible Light Cross‐Linking of Gelatin Hydrogels Offers an Enhanced Cell Microenvironment with Improved Light Penetration Depth

In this study, the cyto‐compatibility and cellular functionality of cell‐laden gelatin‐methacryloyl (Gel‐MA) hydrogels fabricated using a set of photo‐initiators which absorb in 400–450 nm of the visible light range are investigated. Gel‐MA hydrogels cross‐linked using ruthenium (Ru) and sodium persulfate (SPS), are characterized to have comparable physico‐mechanical properties as Gel‐MA gels photo‐polymerized using more conventionally adopted photo‐initiators, such as 1‐[4‐(2‐hydroxyethoxy)‐phenyl]‐2‐hydroxy‐2‐methyl‐1‐propan‐1‐one (Irgacure 2959) and lithium phenyl(2,4,6‐trimethylbenzoyl) phosphinate (LAP). It is demonstrated that the Ru/SPS system has a less adverse effect on the viability and metabolic activity of human articular chondrocytes encapsulated in Gel‐MA hydrogels for up to 35 days. Furthermore, cell‐laden constructs cross‐linked using the Ru/SPS system have significantly higher glycosaminoglycan content and re‐differentiation capacity as compared to cells encapsulated using I2959 and LAP. Moreover, the Ru/SPS system offers significantly greater light penetration depth as compared to the I2959 system, allowing thick (10 mm) Gel‐MA hydrogels to be fabricated with homogenous cross‐linking density throughout the construct. These results demonstrate the considerable advantages of the Ru/SPS system over traditional UV polymerizing systems in terms of clinical relevance and practicability for applications such as cell encapsulation, biofabrication, and in situ cross‐linking of injectable hydrogels.     

Current research progress of photopolymerized hydrogels in tissue engineering

Owing to the special fo rmation of photopolymerized hydrogels,they can effectively control the formation of hydrogels in space and time.Moreover,the photopolymerized hydrogels have mild formation conditions and biocompatibility;therefore,they can be widely used in tissue engineering.With the development and application of manufacturing technology,photopolymerized hydrogels can be widely used in cell encapsulation,scaffold materials,and other tissue engineering fields through more elaborate manufacturing methods.This review covers the types of photoinitiators,manu facturing technologies for photopolymerized hydrogels as well as the materials used,and a summary of the applications of photopolymerized hydrogels in tissue engineering.     

Silk‐Inspired β‐Peptide Materials Resist Fouling and the Foreign‐Body Response

The functions of implants like medical devices are often compromised by the host's foreign‐body response (FBR). Herein, we report the development of low‐FBR materials inspired by serine‐rich sericin from silk. Poly‐β‐homoserine (β‐HS) materials consist of the hydrophilic unnatural amino acid β‐homoserine. Self‐assembled monolayers (SAMs) of β‐HS resist adsorption by diverse proteins, as well as adhesion by cells, platelets, and diverse microbes. Experiments lasting up to 3 months revealed that, while implantation with control PEG hydrogels induced obvious inflammatory responses, collagen encapsulation, and macrophage accumulation, these responses were minimal with β‐HS hydrogels. Strikingly, the β‐HS hydrogels induce angiogenesis in implant‐adjacent tissues. Molecular dynamics simulations indicated that the low FBR performance of β‐HS results from what we term “dual hydrogen bonding hydration”, wherein both the backbone amide groups and the sidechain hydroxyl groups of β‐HS undergo hydration.     

Biomimetic Strain‐Stiffening Self‐Assembled Hydrogels

Supramolecular structures with strain‐stiffening properties are ubiquitous in nature but remain rare in the lab. Herein, we report on strain‐stiffening supramolecular hydrogels that are entirely produced through the self‐assembly of synthetic molecular gelators. The involved gelators self‐assemble into semi‐flexible fibers, which thereby crosslink into hydrogels. Interestingly, these hydrogels are capable of stiffening in response to applied stress, resembling biological intermediate filaments system. Furthermore, strain‐stiffening hydrogel networks embedded with liposomes are constructed through orthogonal self‐assembly of gelators and phospholipids, mimicking biological tissues in both architecture and mechanical properties. This work furthers the development of biomimetic soft materials with mechanical responsiveness and presents potentially enticing applications in diverse fields, such as tissue engineering, artificial life, and strain sensors.     

Covalent Incorporation of Heparin Improves Chondrogenesis in Photocurable Gelatin‐Methacryloyl Hydrogels

Multicomponent gelatin‐methacryloyl (GelMA) hydrogels are regularly adopted for cartilage tissue engineering (TE) applications, where optimizing chemical modifications for preserving biofunctionality is often overlooked. This study investigates the biological effect of two different modification methods, methacrylation and thiolation, to copolymerize GelMA and heparin. The native bioactivity of methacrylated heparin (HepMA) and thiolated heparin (HepSH) is evaluated via thromboplastin time and heparan sulfate‐deficient myeloid cell‐line proliferation assay, demonstrating that thiolation is superior for preserving anticoagulation and growth factor signaling capacity. Furthermore, incorporating either HepMA or HepSH in chondrocyte‐laden GelMA hydrogels, cultured for 5 weeks under chondrogenic conditions, promotes cell viability and chondrocyte phenotype. However, only GelMA‐HepSH hydrogels yield significantly greater differentiation and matrix deposition in vitro compared to GelMA. This study demonstrates that thiol‐ene chemistry offers a favorable strategy for incorporating bioactives into gelatin hydrogels as compared to methacrylation while furthermore highlighting GelMA‐HepSH hydrogels as candidates for cartilage TE applications.     

Stimuli‐Responsive Biomolecule‐Based Hydrogels and Their Applications

This Review presents polysaccharides, oligosaccharides, nucleic acids, peptides, and proteins as functional stimuli‐responsive polymer scaffolds that yield hydrogels with controlled stiffness. Different physical or chemical triggers can be used to structurally reconfigure the crosslinking units and control the stiffness of the hydrogels. The integration of stimuli‐responsive supramolecular complexes and stimuli‐responsive biomolecular units as crosslinkers leads to hybrid hydrogels undergoing reversible triggered transitions across different stiffness states. Different applications of stimuli‐responsive biomolecule‐based hydrogels are discussed. The assembly of stimuli‐responsive biomolecule‐based hydrogel films on surfaces and their applications are discussed. The coating of drug‐loaded nanoparticles with stimuli‐responsive hydrogels for controlled drug release is also presented.     

Layer‐by‐Layer Assembly for Surface Tethering of Thin‐Hydrogel Films: Design Strategies and Applications

Manipulation and engineering of the surfaces has a key role in improving the materials properties. Anchoring of thin hydrogels on the materials surface is one of the recently developed methods to achieve surfaces with high potential applications. Layer‐by‐layer (LBL) has been used widely as a strong strategy for immobilization of thin hydrogel films on the surface of various organic/inorganic substrates. Electrostatic LBL and covalent LBL are two main strategies used in this regard. In electrostatic LBL, negatively and positively hydrophilic polymers are sequentially assembled to create a multilayer hydrogel which subsequent covalent crosslinking of multilayers improved the stability of the inserted layers. On the other hand, covalent LBL requires hydrophilic polymers bearing reactive telechelic groups. These reactive polymers are prepared by various polymerization techniques or by post‐functionalization of biopolymers. The principles of hydrogel anchoring have described along with representative examples. Besides, the potential applications of the modified surfaces in specific cases have been addressed and overviewed.     

Cell‐Laden Hydrogels for Multikingdom 3D Printing

Living materials are created through the embedding of live, whole cells into a matrix that can house and sustain the viability of the encapsulated cells. Through the immobilization of these cells, their bioactivity can be harnessed for applications such as bioreactors for the production of high‐value chemicals. While the interest in living materials is growing, many existing materials lack robust structure and are difficult to pattern. Furthermore, many living materials employ only one type of microorganism, or microbial consortia with little control over the arrangement of the various cell types. In this work, a Pluronic F127‐based hydrogel system is characterized for the encapsulation of algae, yeast, and bacteria to create living materials. This hydrogel system is also demonstrated to be an excellent material for additive manufacturing in the form of direct write 3D‐printing to spatially arrange the cells within a single printed construct. These living materials allow for the development of incredibly complex, immobilized consortia, and the results detailed herein further enhance the understanding of how cells behave within living material matrices. The utilization of these materials allows for interesting applications of multikingdom microbial cultures in immobilized bioreactor or biosensing technologies.     

pH‐Sensitive Mechanical Properties of Elastin‐Based Hydrogels

Ionizable amino acids in protein‐based hydrogels can confer pH‐responsive behavior. Because elastin‐like polypeptides (ELPs) have an established sequence and can crosslink to form hydrogels, they are an ideal system for creating pH‐sensitive materials. This study examines different parameters that might affect pH‐sensitive behavior and characterizes the mechanical and physical properties between pH 3 and 11 of three ELP‐based crosslinked hydrogels. The first finding is that varying the amount of crosslinker affects the overall stiffness and resilience of the hydrogels but does not strongly affect water content, swelling ratio, or pH sensitivity. Second, the choice of two popular tag sequences, which vary in histidine and aspartic acid content, does not have a strong effect on pH‐sensitive properties. Last, selectively blocking lysine and tyrosine residues through acetylation significantly decreases the pH‐sensitive zeta potential. Acetylated hydrogels also demonstrate different behavior at low pH values with reduced swelling, reduced water content, and higher stiffness. Overall, this work demonstrates that ELP hydrogels with ionizable groups are promising materials for environmentally‐responsive applications such as drug delivery, tissue engineering, and microfluidics.     

可注射水凝胶的制备与应用

可注射水凝胶在再生医学和药物控释等方面有着广泛的用途,是近年来生物医用材料领域新的研究方向.本文综述了近年来人们在可注射水凝胶制备和应用方面的研究进展,最后展望了其发展前景.