Ligand Functionalization in Metal–Organic Frameworks for Enhanced Carbon Dioxide Adsorption

Ligand functionalization in metal–organic frameworks (MOFs) has been studied extensively and has been demonstrated to enhance gas adsorption and induce interesting gas adsorption phenomena. This account summarizes our recent study of three series of MOFs by ligand functionalization, as well as their carbon dioxide adsorption properties. While ligand functionalization does not change the overall structure of the frameworks, it can influence their gas adsorption behavior. In the first two series, we show how ligand functionalization influences the CO₂ affinity and adsorption capacity of MOFs. We also show a special case in which subtle changes in ligand functionality alter the CO₂ adsorption profile.

     

Extraordinary NO2 Removal by the Metal–Organic Framework UiO‐66‐NH2

Here we discuss the removal of nitrogen dioxide, an important toxic industrial chemical and pollutant, from air using the MOF UiO‐66‐NH₂. The amine group is found to substantially aid in the removal, resulting in unprecedented removal capacities upwards of 1.4 g of NO₂ /g of MOF. Furthermore, whereas NO₂ typically generates substantial quantities of NO on sorbents, the amount generated by UiO‐66‐NH₂ is significantly reduced. Of particular significance is the formation of a diazonium ion on the aromatic ring of the MOF, and the potential reduction of NO₂ to molecular nitrogen.     

A Robust Metal–Organic Framework for Dynamic Light‐Induced Swing Adsorption of Carbon Dioxide

Adsorbents for CO₂ capture need to demonstrate efficient release. Light‐induced swing adsorption (LISA) is an attractive new method to release captured CO₂ that utilizes solar energy rather than electricity. MOFs, which can be tailored for use in LISA owing to their chemical functionality, are often unstable in moist atmospheres, precluding their use. A MOF is used that can release large quantities of CO₂ via LISA and is resistant to moisture across a large pH range. PCN‐250 undergoes LISA, with UV flux regulating the CO₂ desorption capacity. Furthermore, under UV light, the azo residues within PCN‐250 have constrained, local, structural flexibility. This is dynamic, rapidly switching back to the native state. Reusability tests demonstrate a 7.3 % and 4.9 % loss in both adsorption and LISA capacity after exposure to water for five cycles. These minimal changes confirm the structural robustness of PCN‐250 and its great potential for triggered release applications.     

Studies on Photocatalytic CO2 Reduction over NH2‐Uio‐66(Zr) and Its Derivatives: Towards a Better Understanding of Photocatalysis on Metal–Organic Frameworks

Metal–organic framework (MOF) NH₂‐Uio‐66(Zr) exhibits photocatalytic activity for CO₂ reduction in the presence of triethanolamine as sacrificial agent under visible‐light irradiation. Photoinduced electron transfer from the excited 2‐aminoterephthalate (ATA) to Zr oxo clusters in NH₂‐Uio‐66(Zr) was for the first time revealed by photoluminescence studies. Generation of Zr^III and its involvement in photocatalytic CO₂ reduction was confirmed by ESR analysis. Moreover, NH₂‐Uio‐66(Zr) with mixed ATA and 2,5‐diaminoterephthalate (DTA) ligands was prepared and shown to exhibit higher performance for photocatalytic CO₂ reduction due to its enhanced light adsorption and increased adsorption of CO₂. This study provides a better understanding of photocatalytic CO₂ reduction over MOF‐based photocatalysts and also demonstrates the great potential of using MOFs as highly stable, molecularly tunable, and recyclable photocatalysts in CO₂ reduction.     

A Stable Metal–Organic Framework Featuring a Local Buffer Environment for Carbon Dioxide Fixation

A majority of metal–organic frameworks (MOFs) fail to preserve their physical and chemical properties after exposure to acidic, neutral, or alkaline aqueous solutions, therefore limiting their practical applications in many areas. The strategy demonstrated herein is the design and synthesis of an organic ligand that behaves as a buffer to drastically boost the aqueous stability of a porous MOF (JUC‐1000), which maintains its structural integrity at low and high pH values. The local buffer environment resulting from the weak acid–base pairs of the custom‐designed organic ligand also greatly facilitates the performance of JUC‐1000 in the chemical fixation of carbon dioxide under ambient conditions, outperforming a series of benchmark catalysts.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

A Porphyrin‐Based Porous rtl Metal–Organic Framework as an Efficient Catalyst for the Cycloaddition of CO2 to Epoxides

A porous rtl metal–organic framework (MOF) [Mn₅L(H₂O)₆?(DMA)₂]?5DMA?4C₂H₅OH ( 1? Mn) (H₁₀L=5,10,15,20‐tetra(4‐(3,5‐dicarboxylphenoxy)phenyl)porphyrin; DMA=N,N′‐dimethylacetamide) was synthesized by employing a new porphyrin‐based octacarboxylic acid ligand. 1? Mn exhibits high Mn^II density in the porous framework, providing it great Lewis‐acid heterogeneous catalytic capability for the cycloaddition of CO₂ with epoxides. Strikingly, 1? Mn features excellent catalytic activity to the cycloaddition of CO₂ to epoxides, with a remarkable initial turnover frequency 400 per mole of catalyst per hour at 20 atm. As‐synthesized 1? Mn also exhibits size selectivity to different epoxide substrates on account of their steric hindrance. The high catalytic activity, size selectivity, and stability toward the epoxides on catalytic cycloaddition of CO₂ make 1? Mn a promising heterogeneous catalyst for fixation and utilization of CO₂.     

Post‐Synthetic Polymerization of UiO‐66‐NH2 Nanoparticles and Polyurethane Oligomer toward Stand‐Alone Membranes for Dye Removal and Separation

Metal–organic frameworks (MOFs) are widely used as porous materials in the fields of adsorption and separation. However, their practical application is largely hindered by limitations to their processability. Herein, new UiO‐66‐Urea‐based flexible membranes with MOF loadings of 50 ( 1 ), 60 ( 2 ), and 70 wt % ( 3 ) were designed and prepared by post‐synthetic polymerization of UiO‐66‐NH₂ nanoparticles and a polyurethane oligomer under mild conditions. The adsorption behavior of membrane 3 towards four hydrophilic dyes, namely, eosin Y (EY), rhodamine B (RB), malachite green (MG), and methylene blue (MB), in aqueous solution was studied in detail. It exhibits strong adsorption of EY and RB but weak adsorption of MG and MB in aqueous solution. Owing to the selective adsorption of these hydrophilic dyes, membrane 3 can remove EY and RB from aqueous solution and completely separate EY/MB, RB/MG, and RB/MB mixtures in aqueous solution. In addition, the membrane is uniformly textured, easily handled, and can be reused for dye adsorption and separation.     

Defect‐Controlled Preparation of UiO‐66 Metal–Organic Framework Thin Films with Molecular Sieving Capability

Metal–organic framework (MOF) UiO‐66 thin films are solvothermally grown on conducting substrates. The as‐synthesized MOF thin films are subsequently dried by a supercritical process or treated with polydimethylsiloxane (PDMS). The obtained UiO‐66 thin films show excellent molecular sieving capability as confirmed by the electrochemical studies for redox‐active species with different sizes.     

Ligand Functionalization and Its Effect on CO2 Adsorption in Microporous Metal–Organic Frameworks

We report two new 3D structures, [Zn₃(bpdc)₃(2,2′‐dmbpy)] (DMF)_x(H₂O)_y ( 1 ) and [Zn₃(bpdc)₃(3,3′‐dmbpy)]?(DMF)₄(H₂O)_0.5 ( 2 ), by methyl functionalization of the pillar ligand in [Zn₃(bpdc)₃(bpy)] (DMF)₄?(H₂O) ( 3 ) (bpdc=biphenyl‐4,4′‐dicarboxylic acid; z,z′‐dmbpy=z,z′‐dimethyl‐4,4′‐bipyridine; bpy=4,4′‐bipyridine). Single‐crystal X‐ray diffraction analysis indicates that 2 is isostructural to 3 , and the power X‐ray diffraction (PXRD) study shows a very similar framework of 1 to 2 and 3 . Both 1 and 2 are 3D porous structures made of Zn₃(COO)₆ secondary building units (SBUs) and 2,2′‐ or 3,3′‐dmbpy as pillar ligand. Thermogravimetric analysis (TGA) and PXRD studies reveal high thermal and water stability for both compounds. Gas‐adsorption studies show that the reduction of surface area and pore volume by introducing a methyl group to the bpy ligand leads to a decrease in H₂ uptake for both compounds. However, CO₂ adsorption experiments with 1′ (guest‐free 1 ) indicate significant enhancement in CO₂ uptake, whereas for 2′ (guest‐free 2 ) the adsorbed amount is decreased. These results suggest that there are two opposing and competitive effects brought on by methyl functionalization: the enhancement due to increased isosteric heats of CO₂ adsorption (Q_st), and the detraction due to the reduction of surface area and pore volume. For 1′ , the enhancement effect dominates, which leads to a significantly higher uptake of CO₂ than its parent compound 3′ (guest‐free 3 ). For 2′ , the detraction effect predominates, thereby resulting in reduced CO₂ uptake relative to its parent structure 3′ . IR and Raman spectroscopic studies also present evidence for strong interaction between CO₂ and methyl‐functionalized π moieties. Furthermore, all compounds exhibit high separation capability for CO₂ over other small gases including CH₄, CO, N₂, and O₂.     

Metal–Organic Framework (MOF)‐Derived Nanoporous Carbon Materials

Metal–organic framework (MOF)‐derived nanoporous carbon materials have attracted significant interest due to their advantages of controllable porosity, good thermal/chemical stability, high electrical conductivity, catalytic activity, easy modification with other elements and materials, etc. Thus, MOF‐derived carbons have been used in numerous applications, such as environmental remediations, energy storage systems (i.e. batteries, supercapacitors), and catalysts. To date, many strategies have been developed to enhance the properties and performance of MOF‐derived carbons. Herein, we introduce and summarize recent important approaches for advanced MOF‐derived carbon structures with a focus on precursor control, heteroatom doping, shape/orientation control, and hybridization with other functional materials.     

Metal–Organic Framework for Emulsifying Carbon Dioxide and Water

Forming emulsions of carbon dioxide (CO₂) and water can largely expand the utility of CO₂. Herein we propose for the first time the utilization of a metal–organic framework (MOF) for emulsifying CO₂ and water. Owing to the hybrid composition, MOF particles can easily assemble at the CO₂/water interface to create a rigid protective barrier around the dispersed droplet. The MOF‐stabilized CO₂ and water emulsion has exceptional stability compared to those emulsions stabilized by surfactants or other solids. Moreover, the CO₂ and water emulsion stabilized by MOF is “tunable” due to the designable features of MOFs and adjustable character of CO₂. Such a novel kind of emulsion composed of CO₂, water, and MOF provides a facile route for constructing MOF superstructures with many advantages. The macroporous networks and hollow capsules of different kinds of MOFs have been successfully derived from CO₂ and water emulsions.     

Iron Metal–Organic Frameworks MIL‐88B and NH2‐MIL‐88B for the Loading and Delivery of the Gasotransmitter Carbon Monoxide

Crystals of MIL‐88B‐Fe and NH₂‐MIL‐88B‐Fe were prepared by a new rapid microwave‐assisted solvothermal method. High‐purity, spindle‐shaped crystals of MIL‐88B‐Fe with a length of about 2 μm and a diameter of 1 μm and needle‐shaped crystals of NH₂‐MIL‐88B‐Fe with a length of about 1.5 μm and a diameter of 300 nm were produced with uniform size and excellent crystallinity. The possibility to reduce the as‐prepared frameworks and the chemical capture of carbon monoxide in these materials was studied by in situ ultrahigh vacuum Fourier‐transform infrared (UHV‐FTIR) spectroscopy and Mössbauer spectroscopy. CO binding occurs to unsaturated coordination sites (CUS). The release of CO from the as‐prepared materials was studied by a myoglobin assay in physiological buffer. The release of CO from crystals of MIL‐88B‐Fe with t_1/2=38 min and from crystals of NH₂‐MIL‐88B‐Fe with t_1/2=76 min were found to be controlled by the degradation of the MIL materials under physiological conditions. These MIL‐88B‐Fe and NH₂‐MIL‐88B‐Fe materials show good biocompatibility and have the potential to be used in pharmacological and therapeutic applications as carriers and delivery vehicles for the gasotransmitter carbon monoxide.     

An Efficient Nanoscale Heterogeneous Catalyst for the Capture and Conversion of Carbon Dioxide at Ambient Pressure

Silver nanoparticles were successfully supported on the zeolite‐type metal–organic framework MIL‐101 to yield Ag@MIL‐101 by a simple liquid impregnation method. For the first time, the conversion of terminal alkynes into propiolic acids with CO₂ was achieved by the use of the Ag@MIL‐101 catalysts. Owing to the excellent catalytic activity, the reaction proceeded at atmospheric pressure and low temperature (50 °C). The Ag@MIL‐101 porous material is of outstanding bifunctional character as it is capable of simultaneously capturing and converting CO₂ with low energy consumption and can be recovered easily by centrifugation.     

Unprecedented Sulfone‐Functionalized Metal–Organic Frameworks and Gas‐Sorption Properties

Gas storage : A new, sulfone‐functionalized dicarboxylate‐based ligand (see figure) is capable of directing the formation of novel metal–organic frameworks with unprecedented organic and inorganic secondary building units. A high CO₂ uptake with remarkable selectivity over CH₄, N₂, and H₂ was observed at near‐ambient temperature.

     

A Novel Bismuth‐Based Metal–Organic Framework for High Volumetric Methane and Carbon Dioxide Adsorption

Solvothermal reaction of H₄L (L=biphenyl‐3,3′,5,5′‐tetracarboxylate) and Bi(NO₃)₃ ? (H₂O)₅ in a mixture of DMF/MeCN/H₂O in the presence of piperazine and nitric acid at 100 °C for 10 h affords the solvated metal–organic polymer [Bi₂(L)_1.5(H₂O)₂] ? (DMF)_3.5 ? (H₂O)₃ (NOTT‐220‐solv). A single crystal X‐ray structure determination confirms that it crystallises in space group P2/c and has a neutral and non‐interpenetrated structure comprising binuclear {Bi₂} centres bridged by tetracarboxylate ligands. NOTT‐220‐solv shows a 3,6‐connected network having a framework topology with a {4 ? 6²}₂{4² ? 6⁵ ? 8⁸}{6² ? 8} point symbol. The desolvated material NOTT‐220a shows exceptionally high adsorption uptakes for CH₄ and CO₂ on a volumetric basis at moderate pressures and temperatures with a CO₂ uptake of 553 g L^?1 (20 bar, 293 K) with a saturation uptake of 688 g L^?1 (1 bar, 195 K). The corresponding CH₄ uptake was measured as 165 V(STP)/V (20 bar, 293 K) and 189 V(STP/V) (35 bar, 293 K) with a maximum CH₄ uptake for NOTT‐220a recorded at 20 bar and 195 K to be 287 V(STP)/V, while H₂ uptake of NOTT‐220a at 20 bar, 77 K is 42 g L^?1. These gas uptakes have been modelled by grand canonical Monte Carlo (GCMC) and density functional theory (DFT) calculations, which confirm the experimental data and give insights into the nature of the binding sites of CH₄ and CO₂ in this porous hybrid material.