Aminolysis of p‐tert‐Butyl‐tetrakis[(ethoxycarbonyl)methoxy]thiacalix[4]arene

A convenient method for preparation of thiacalix[4]arene tetraamides in high to good yields by reacting conic or 1,3‐alt‐p‐tert‐butyl‐tetrakis[(ethoxycarbonyl)methoxy]‐thiacalix[4]arene with excess monoamines or diamines is reported. In most cases, corresponding tetraamides with original conformation were obtained. However, when the cone one was reacted with ethylenediamine or propylenediamine, the obtained tetraamides possessed partial conic conformation, which meant that conversion of conformation occurred.     

A Rare and Exclusive Endoperoxide Photoproduct Derived from a Thiacalix[4]arene Crown‐Shaped Derivative Bearing a 9,10‐Substituted Anthracene Moiety

A rare and exclusive endoperoxide photoproduct was quantitatively obtained from a thiacalix[4]arene crown‐shaped derivative upon irradiation at λ=365 nm; the structure was unambiguously confirmed by ¹H/¹³C NMR spectroscopy and X‐ray crystallography. The prerequisites for the formation of the endoperoxide photoproduct have also been discussed. Furthermore, the photochemical reaction rate could be greatly enhanced in the presence of the thiacalix[4]arene platform because it served as a host to capture oxygen.     

Hard–Soft Receptors, Tetrakis[(N,N-diethylaminocarbonyl)methoxy] thiacalix[4]arene Derivatives with cone and 1,3-alternate Conformation

Direct O-alkylation of p-tert-butyltetrathiacalix[4]arene with N,N-diethylchloroacetamide afforded two conformational isomers (1,3-alternate and cone) of tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene and 1,3-disubstituted bis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene, depending on the base used. The complaxation behaviors of the tetrakis isomers were assessed by ¹H NMR titration experiments. Evidence of 1:2 (homo- and hetero-dinuclear) complexes formation of 1,3-alternate-tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene with alkali (K⁺ and Na⁺) or transition (Ag⁺) metal ions was obtained. Interestingly, it was found that the cone-tetrakis[(N,N-diethylaminocarbonyl)methoxy]thiacalix[4]arene required a prior Ag⁺ complexation to form 1:2 heterodinuclear complex. Received in final form: 26 January 2005     

一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。     

Synthesis and characterisation of p-diethylaminomethylthiacalix[4]arene for selective recovery of platinum from automotive catalyst residue

The ability of chloroform solutions of p-diethylaminomethylthiacalix[4]arene 1 to extract platinum from HCl media was tested. As an ion-pair extractant, compound 1 had the highest platinum extraction ability among all the thiacalix[n]arene derivatives tested in this study. Compound 1 was a highly specific extractant for Pt(IV) ions from single-metal solutions and platinum-group metal solutions from automotive catalyst residue. Various conditions such as contact time, pH, concentration of 1, effect of chloride ions, effect of acidity and Pt(IV) concentration were studied. The distribution ratio of platinum ions (D) was calculated. The platinum complex stoichiometry ratio was obtained using slope analysis. The 1–Pt(IV) complex was characterised using X-ray photoelectron spectroscopy, FT-IR and ¹H NMR. Finally, the Pt(IV) extraction percentage of compound 1 was compared with that of previously reported thiacalix[n]arene-based extractants.     

Ionic recognition by thiacalixarenes: binding of alkali and heavy metal ions by thiacalix[4]arene-bis-crown[n] ethers

The binding properties of two thiacalix[4]arene-bis-crown[n] derivatives (n = 5 and 6) were examined through extraction experiments. The stability constants of the resulting complexes in methanol were determined. The replacement of the bridging CH2 groups by sulfur atoms leads to a strong decrease in both extraction and complexation levels of alkali metal ions but does not affect the selectivity within the series of crown ethers. The stability of complexes with heavy metal ions does not change markedly on passing from thiacalix[4]arene-bis-crown[n] ethers to their calix[4]arene-bis-crown[n] counterparts; therefore no clear-cut conclusions about the possible interactions between these cations and the sulfur atoms can be drawn.     

Synthesis,crystal structure and complexation behaviour of a thiacalix[4]arene bearing 1,2,3-triazole groups

The structure and complexation behaviour of 1,3-alternate-1,2,3-triazole based on thiacalix[4]arene,1,3-alternate-1 and 2 have been determined by means of X-ray analysis, fluorescence and ¹H NMR spectroscopy. The X-ray results suggested that the nitrogen atom N3 on triazole ring can act as hydrogen bond acceptors in the self-assembly of a supramolecular structure. The fluorescence spectra changes indicated that the thiacalix[4]arene bearing 1,2,3-triazole groups were highly selective for Ag⁺ in comparison with other tested metal ions by enhancement of the monomer emission of pyrene. The ¹H NMR results suggested that Ag⁺ can be strongly bonded by the triazole groups with the cooperation of the ionophoric cavity formed by the two inverted benzene rings and the sulfur atoms of the thiacalix[4]arene.     

Synthesis and Properties of New Thiacalixarene Derivatives with Palladium Ion

Three new thiacalix[4]arene derivatives, 5,11,17,23-tetra-tert-butyl-25,27-di(2-hydroxyethoxy)-26,28-dihydroxythiacalix-{}[4]arene (2), 5,11,17,23-tetra-tert-25, 26,27,28-tetrakis[(methylcarboxyl)methoxy]thiacalix[4]arene (3),5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(2-hydroxy-1-propanoxy)thiacalix[4]arene (4), were synthesized for the first time. The coordination properties of thiacalix[4]arene(1) and its derivatives (2 and 4) were investigated by detecting the interactions betweenthese compounds and two palladium complexes, cis-[Pd(en)(H₂O)₂]²⁺ and cis-[Pd(dtco-3-OH)(H₂O)₂]²⁺, by means of electrospray ionization mass spectrometry (ESI-MS) technique.     

Electronic,bonding, and optical properties of 1d [CuCN]n (n = 1–10) chains, 2d [CuCN]n (n = 2–10) nanorings,and 3d [Cun(CN)n]m (n = 4, m = 2, 3; n = 10, m = 2) tubes studied by DFT/TD‐DFT methods

The electronic, bonding, and photophysical properties of one‐dimensional [CuCN]_n (n = 1–10) chains, 2‐D [CuCN]_n (n = 2–10) nanorings, and 3‐D [Cu_n(CN)_n]_m (n = 4, m = 2, 3; n = 10, m = 2) tubes are investigated by means of a multitude of computational methodologies using density functional theory (DFT) and time‐dependent‐density‐functional theory (TD‐DFT) methods. The calculations revealed that the 2‐D [CuCN]_n (n = 2–10) nanorings are more stable than the respective 1‐D [CuCN]_n (n = 2–10) linear chains. The 2‐D [CuCN]_n (n = 2–10) nanorings are predicted to form 3‐D [Cu_n(CN)_n]_m (n = 4, m = 2, 3; n = 10, m = 2) tubes supported by weak stacking interactions, which are clearly visualized as broad regions in real space by the 3D plots of the reduced density gradient. The bonding mechanism in the 1‐D [CuCN]_n (n = 1–10) chains, 2‐D [CuCN]_n (n = 2–10) nanorings, and 3‐D [Cu_n(CN)_n]_m (n = 4, m = 2, 3; n = 10, m = 2) tubes are easily recognized by a multitude of electronic structure calculation approaches. Particular emphasis was given on the photophysical properties (absorption and emission spectra) of the [CuCN]_n chains, nanorings, and tubes which were simulated by TD‐DFT calculations. The absorption and emission bands in the simulated TD‐DFT absorption and emission spectra have thoroughly been analyzed and assignments of the contributing principal electronic transitions associated to individual excitations have been made. © 2015 Wiley Periodicals, Inc.     

四（对叔丁基）硫杂杯[4]芳烃选择性包合四氟硼酸分子：晶体结构和理论研究

X－射线晶体衍射测定了4－(对叔丁基)硫杂杯[4]芳烃选择性地包合四氟硼酸分子。晶体学数据为：C₄₀H₄₉O₄S₄BF₄，M_r=808.88， 四方锥， 空间群 P4/nmm，a=1.5887(2), b=1.5887(2), c=0.8428(0) nm, V=2.127(2) nm³, Z=2, D_c=1.263 g·cm^-3, R₁=0.0405, _WR[I>2σ(I)]=0.1218. ¹⁹F NMR谱中，在-151.4 ppm处出现的峰，证实了四氟硼酸的存在。用Bader的分子中的原子理论方法计算了分子结构中的非共价键相互作用。结果显示，在四氟硼酸包合物中，除了F…H－C氢键作用和阳离子－阴离子的静电作用外，F^δ--C^δ+静电作用的存在也对4－(对叔丁基)硫杂杯[4]芳烃憎水空腔包合氟硼酸分子起到了稳定作用。     

Synthesis and Inclusion Properties of a Novel Thiacalix[4]arene-Based Hard–Soft Receptor with 1,3-Alternate Conformation

A novel ditopic receptor possessing two complexation sites and bearing 1,3-alternate conformation based on thiacalix[4]arene was prepared. The binding behaviors with alkali metals and silver ion have been examined by ¹H NMR titration experiment. Although the formation of the heterogeneous dinuclear complexes was not observed, the exclusive formation of mononuclear complexes of 1,3-alternate-3 with metal cations is of particular interest in negative allosteric effect in the thiacalix[4]arene family. These findings demonstrate that preorganization, subtle conformational changes and affinity have a pronounced effect on the complexation process between the two different arms placed at the two edges of the thiacalix[4]arene cavity.     

Dibutylphosphinoylmethyloxythiacalix[4]arenes. Synthesis,structure, americium,europium and technetium extraction

A series of thiacalix[4]arenes bearing one, two or four chelating dibutylphopshinoylmethoxy groups have been synthesised and studied in the context of this paper. The synthesis consisted of precise Williamson alkylation of thiacalixarene tetrols with tosylate of dibutylhydroxymethyl phosphine oxide in the presence of alkali metal carbonates or sodium hydride. Stereochemical yield of the reaction (cone or 1,3-alternate conformer) depends on the nature of alkali metal. Small-sized ‘hard’ sodium cation organises the macrocyclic platform in the cone conformation, but larger and ‘soft’ potassium and cesium cations stabilise the macrocycle in the 1,3-alternate conformation. All synthesised compounds (except monophosphine monoxide) possess either moderate or high extraction ability towards pertechnetate ion. The cone-shaped thiacalix[4]arene tetraphosphine tetraoxide due to cooperative (macrocyclic) effect of eight oxygen atoms of the phosphinoylmetoxy-binding groups effectively extract spherical americium, europium cations due to cooperative (macrocyclic) effect of eight oxygen atoms of the phosphinoylmetoxy-binding groups. The extraction ability is very similar to that of calix[5]arene pentaphosphine pentaoxide existing in the cone conformation.     

Indeno[1,2‐b]fluorene‐Based [2,2]Cyclophanes with 4n/4n and 4n/[4n+2] π Electrons: Syntheses,Structural Analyses,and Excitonic Coupling Properties

Indeno[1,2‐b]fluorene‐based [2,2]cyclophanes with 4n/4n and 4n/[4n+2] π‐electron systems were prepared, and their structures were identified by X‐ray crystallography. With short π–π distances around 3.0 Å, [2.2](5,11)indeno[1,2‐b]fluorenophane and its precursor [2.2](5,11)indeno[1,2‐b]fluorene‐6,12‐dionophane exhibit remarkable transannular interactions, leading to their unusual electrochemical and photophysical properties. With the aid of femtosecond transient absorption spectroscopy, the transition from the monomeric excited state to the redshifted H‐type dimeric state was first observed, correlating to the calculated excitonic energy splitting and the steady‐state absorption spectra induced by charge‐transfer‐mediated superexchange interaction.     

Synthesis,Structures, and Properties of Four Novel Coordination Compounds based on a Flexible Tetrakis(imidazol‐1‐ylmethyl)methane Ligand

Four coordination polymers, namely, [Zn₂(TIYM)(2,6‐PYDC)₂]_n · n(CH₃OH) · 3n(H₂O) ( 1 ), [Cu(TIYM)(2,6‐PYDC)]_n · 3n(H₂O) ( 2 ), [Co(TIYM)(2,6‐PYDC)]_n · n(CH₃OH) · 3n(H₂O) ( 3 ), and [Cd₂(TIYM)(2,6‐PYDC)₂(H₂O)]_n · n(H₂O) ( 4 ) with the flexible N‐containing ligand [tetrakis(imidazol‐1‐ylmethyl)methane (TIYM)] and the N‐containing dicarboxylic acid [2,6‐pyridinedicarboxylic acid (2,6‐PYDC)] were prepared. Compounds 1 – 4 show various structures because of different N–C_center–N angles (θ) of TIYM ligands and changing coordination modes of 2,6‐PYDC. Compounds 1 , 2 , and 3 display a similar 1D ladder‐like chain, whereas 4 gives a 1D quad‐core lifting platform shaped belt. The structural diversities in 1 – 4 suggest that the multiple coordination modes or the different freely twist angles of ligands and the presence of different metal atoms play important roles in the resulting structures of the coordination polymers. Furthermore, the solid‐state luminescence properties of 1 and 4 , and the magnetic properties of 3 were investigated.     

Indeno[1,2‐b]fluorene‐Based [2,2]Cyclophanes with 4n/4n and 4n/[4n+2] π Electrons: Syntheses,Structural Analyses,and Excitonic Coupling Properties

Indeno[1,2‐b]fluorene‐based [2,2]cyclophanes with 4n/4n and 4n/[4n+2] π‐electron systems were prepared, and their structures were identified by X‐ray crystallography. With short π–π distances around 3.0 Å, [2.2](5,11)indeno[1,2‐b]fluorenophane and its precursor [2.2](5,11)indeno[1,2‐b]fluorene‐6,12‐dionophane exhibit remarkable transannular interactions, leading to their unusual electrochemical and photophysical properties. With the aid of femtosecond transient absorption spectroscopy, the transition from the monomeric excited state to the redshifted H‐type dimeric state was first observed, correlating to the calculated excitonic energy splitting and the steady‐state absorption spectra induced by charge‐transfer‐mediated superexchange interaction.     

Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.     

Supramolecular Architectures with Open Frameworks Constructed by Transitional Metal Ions,Linear Dicarboxylic Acid,and 2,2′‐Bipyridine

Four new transitional metal supramolecular architectures, [Zn(cca)(2,2′‐bpy)]_n · n(2,2′‐bpy) ( 1 ), [Cu(cca)(2,2′‐bpy)]_n ( 2 ), [Zn(bpdc)(2,2′‐bpy)(H₂O)]_n · 0.5nDMF · 1.5nH₂O ( 3 ), and [Co(bpdc)(2,2′‐bpy)(H₂O)]_n · nH₂O ( 4 ) (H₂cca = p‐carboxycinnamic acid; H₂bpdc = 4,4′‐biphenyldicarboxylic acid; 2,2′‐bpy = 2,2′‐bipyridine) were synthesized by hydrothermal reactions and characterized by single crystal X‐ray diffraction, elemental analyses, and IR spectroscopy. Although the metal ions in these four compounds are bridged by linear dicarboxylic acid into 1D infinite chains, there are different π–π stacking interactions between the chains, which results in the formation of different 3D supramolecular networks. Compound 1 is of a 3D open‐framework with free 2,2′‐bpy molecules in the channels, whereas compound 2 is of a complicated 3D supramolecular network. Compounds 3 and 4 are isostructural. Both compounds have open‐frameworks.     

Self-assembly of nanosized aggregates based on the photoswitchable <Emphasis Type="Italic">p-tert</Emphasis>-butyl thiacalix[4]arene derivative and Fe <Superscript>III</Superscript>, Cu<Superscript>II</Superscript>, and Ag<Superscript>I</Superscript> cations

New p-tert-butyl thiacalix[4]arene tetrasubstituted at the lower rim and containing the azobenzene fragments in the 1,3-alternate configuration was synthesized. Its receptor properties with respect to d-metal cations (Fe ³⁺, Cu²⁺, Ag⁺) were studied using UV spectroscopy and dynamic light scattering (DLS). The ability of p-tert-butyl thiacalix[4]arene to molecular recognition of silver cations was estimated by UV spectroscopy. The aggregation of these systems was studied by the dynamic light scattering method.     

A,C-Bridged Calix[6]arene： Relationship between the Length of Bridge and Conformation

Three new A,C-diamide bridged p-tert-butylcalix[6]arenes were synthesized from p-tert-butylcalix[6]arenes by bridging ClCH2CONH(CH2)nNHCOCH2Cl(n=3,4,6) in acetonitrile using K2CO3 as a base in 17%-25% yields.It was found that the bridged calix[6]arenes with shorter bridges (n=2,3,4 in N′,N′-bischloroacetodiamines) adopt cone conformation, but the last one (n=6) adopts alternate conformation, i.e., accompanying the lengthening of bridge, the conformation of A,C-bridged calix[6]arenes changes from cone to alternate.     

Crystal Structures,Magnetism, and Dye Degradation Catalytic Properties of Copper 2‐Methoxycarboxybenzoate Coordination Complexes

Copper coordination complexes containing the 2‐methoxycarboxybenzoate (2‐mcob) ligand show different topologies depending on the nature of the dipyridyl coligand. [Cu₂(2‐mcob)₂(ebin)]_n ( 1 ) [ebin = ethanebis(isonicotinamide)] shows a ladder structure based on anti‐syn bridged [Cu(OCO)]_n chain motifs. [Cu₂(2‐mcob)₂(bbin)(H₂O)₂] ( 2 ) [bbin = butanebis(isonicotinamide)] displays a dimeric molecular structure. [Cu₂(2‐mcob)₂(hbin)]_n ( 3 ) [hbin = hexanebis(isonicotinamide)] manifests a ladder structure very similar to that of 1 . {[Cu(2‐mcob)(dpa)] · H₂O}_n ( 4 ) [dpa = bis(4‐pyridyl)amine] shows a chain coordination polymer structure. All four materials showed significant promise as heterogeneous degradation catalysts for Congo Red dye in aqueous suspension under ultraviolet irradiation. Variable temperature magnetic susceptibility experiments for 1 indicated the presence of weak antiferromagnetic exchange (g = 2.059(2), J = –0.84(2) cm^–1). Thermal degradation behavior is also discussed.