含二羟基二苯酮系列热致液晶共聚酯的合成与表征——Ⅱ.含4,4‘—二羟…

采用直接熔融缩聚及固相聚合方法由４，４’－二羟基二苯酮（ＢＨＰ），对苯二甲酸（ＴＰＡ），对羟基苯甲酸（ＰＨＢＡ），间苯二酚（ＲＥＳ）成功地合成了四元共聚酯高分子，该聚酯的组成结构及性质由偏光显微镜、广角Ｘ－射线衍射、ＤＳＣ等手段进行表征，结果表明共聚酯具有向列型液晶特征。     

含偶氮苯生色团的聚醚的合成与热致液晶性质

β－氯乙基缩水甘油醚（ＧＣＥ）和ＧＣＥ／羟丁基乙烯基醚（ＨＢＶＥ）分别通过阳离子聚合、光引发共聚合,获得两种聚醚,然后再分别与４－硝基－４’－羟基偶氦苯（ＮＨＡ）反应,制备了两种侧链含偶氦苯生色团的液晶聚合物（ＰＡＥＧ、ＰＡＶ）。用ＦＴＩＲ、＾１Ｈ－ＮＭＲ和ＥＡ对其化学结构及生色团含量进行了表征,以ＰＯＭ,ＤＳＣ、ＴＧＡ和ＷＡＸＤ对聚合物介晶相转变温度、织构、热稳定性及相行为进行了研究。结果表明,     

侧链型聚醚液晶聚合物的合成和表征

以季胺碱作催化剂,对甲氧基（或丁氧基）苯甲酸对羟基苯酯与环氧氯丙烷反应,合成了对甲氧基（或丁氧基）苯甲酸－对环氧丙氧基苯基酯（ＩＩＡ或ＩＩＢ）。然后此化合物在三氟化硼乙醚络合物催化剂作用下,以丁二醇为助催化剂进行环聚合,得到聚合物Ａ和Ｂ。ＤＳＣ及热台偏光显微镜检测结果表明聚合物Ａ在１０３￣１２１℃区域为液晶相,而聚合物Ｂ为结晶性高聚物。     

含二羟基二苯酮热致液晶共聚酯的合成与表征（Ⅵ）──含二羟基二苯酮热致液晶共聚酯结晶结构的X射线衍射研究

以广角Ｘ－射线衍射（ＷＡＸＤ）对含二羟基二苯酮（ＢＨＰ）、对羟基苯甲酸（ＰＨＢＡ）、对苯二甲酸（ＴＰＡ）、问苯二酚（ＲＥＳ）的系列热致液品共聚酯进行了较为深入的研究，详细讨论了不同组成的共聚酯的结晶结构、结晶度、结晶颗粒大小等等。     

含二羟基二苯酮系列热致液晶共聚酯的合成与表征──Ⅱ．含4，4＇－二羟基二苯酮，对苯二甲酸，对羟基苯甲酸，间苯二酚的共聚酯

采用直接熔融缩聚及固相聚合方法由４，４’－二羟基二苯酮（ＢＨＰ），对苯二甲酸（ＴＰ），对羟基苯甲酸（ＰＨＢＡ），间苯二酚（ＲＥＳ）成功地合成了四元共聚酯高分子，该聚酯的组成结构及性质由偏光显微镜、广角Ｘ－射线衍射、ＤＳＣ等手段进行表征，结果表明共聚酯具有向列型液晶特征．     

西佛碱型液晶聚氨酯的合成及表征

亚甲基二异氰酸酯（ＨＤＩ）,甲苯二异氰酸酯（ＴＤＩ）及４,４’－二苯基甲烷二异氰酸酯（ＭＤＩ）进行缩聚,得到晶液聚氨酯ＢＨＢＡＰ－ＨＤＩ,ＢＨＢＡＰ－ＴＤＩ及ＨＢＨＡＰ－ＭＤＩ,其液晶性质用ＤＳＣ,Ｘ－光射线衍射及热台偏光显微镜进行了表征。ＢＨＢＡＰ－ＨＤＩ,ＢＨＢＡＰ－ＴＤＩ分别在２００￣２３１℃,１６７￣２１１℃区域显示液晶行为,而ＢＨＢＡＰ－ＭＤＩ的熔融温度则高于２８０℃。并且利用ＤＳＣ对Ｂ     

含液晶二醇聚氨酯研究

合成了具有液晶性质的二元醇一对苯二甲酰二羟苯甲酸丁二醇酯（ＴＯＢＢ），这种二元醇单独或与端羟基聚了二烯（ＨＴＰＢ）混合后与二异氰酸酯反应生成几种聚氨酯，用ＩＲ，ＤＳＣ，偏光显微镜和ＷＡＸＤ对它们进行了表征，证明这种二元醇和聚氨酯都具有液晶性质。     

一种新型聚酯醚砜热致液晶高分子的合成与表征

由对苯二甲酸、４，４＇－双（４－羟基苯氧基）二苯枫和对羟基苯甲酸合成了具有液晶特性的一种新型聚酯醚砜．从反应介质预聚合和后聚合等因素讨论了提高聚合物粘度的途径，以ＤＳＣ、偏光显微镜和Ｘ－线衍射仪等方法表征了其液晶特性．     

含甲氧基悬挂基聚甲亚胺醚的合成及其液晶行为

以单体双－（３－甲氧基－４－羟基苄叉）－４，４＇－二亚胺基苯与ａ，ω－二溴烷，采用相转移催化聚醚化法合成７种主链型液晶聚甲亚胺醚，用＾１Ｈ ＮＭＲ、ＩＲ、ＵＶ、元素分析及热台偏光显微镜、ＤＳＣ和ＷＡＸＤ对聚合物的结构和液晶行为进行了表征。熔点和清亮点随间隔基数（ｎ）改变，并有奇偶效应，呈现锯齿形变化规律。     

3-羟基-4-甲氧基肉桂酸--基体辅助激光解吸电离质谱法测定DNA的有效基体

报道用基体辅助激光解吸电离质谱法（ ＭＡＬＤＩ－ ＭＳ） 测定ＤＮＡ 分子的一种有效基体３－ 羟基－ ４ － 甲氧基肉桂酸。 实验发现该基体对ＤＮＡ 分子解吸和电离效率高, 对ＤＮＡｄ（ Ｔ） １０ 分子离子峰的分辨率为５ ５５１ ．４ , 信噪比为１１ ．８ 。３ － 羟基－ ４ － 甲氧基肉桂酸是ＭＡＬＤＩ－ ＭＳ 法测定ＤＮＡ 分子的一个可供选择使用有效基体。     

Synthesis,characterization, and crystallization of thermoplastic aromatic semi‐crystalline poly(ester‐imide)s based on bis(trimellitic acid anhydride) phenyl ester

A high molecular weight aromatic homopoly(ester‐imide) (homoPEI) was synthesized from homopoly(ester‐amic acids) (homoPEAA), which was obtained from the reaction of bis(trimellitic acid anhydride) phenyl ester (BTAH) with 4‐4'‐oxydianiline ether (ODA). This homoPEI was melt‐processable semi‐crystalline polymer and displayed dual endothermic transitions which were attributed to the different levels of crystal perfection and size in the crystal structures. Four high molecular weight aromatic copoly(ester‐imide)s (coPEIs) were synthesized via copoly(ester‐amic acids)s (coPEAA) from the reaction of 4, 4'‐oxydiphthalic anhydride (ODPA) and BTAH with ODA. The molar percentage of BTAH varied from 10 to 40%. When the molar percentages of BTAH were 30 and 40%, the resulting two coPEIs were crystallinable and their melting temperatures were 361°C and 356/371°C, respectively. Differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD) results indicated that the crystal structures included short segments of BTAH/ODA and ODPA/ODA. The initial crystallization of the two coPEIs took place during imidization process. Thermogravimetric (TA) and mechanical analysis confirmed that both homoPEI and coPEIs showed almost no weight loss until 400°C in N₂ and good mechanical properties. Copyright © 2009 John Wiley & Sons, Ltd.     

New polymers syntheses. 104. Synthesis of poly(ester‐imide)s from nylon 6, nylon 11, or nylon 12

Nylon 6 was reacted with trimellitic anhydride (TMA) at 230 °C so that a complete degradation to N‐(5‐carboxy‐pentamethylene) trimellitimide was obtained. The crude imide dicarboxylic acid was reacted in situ with 4,4′‐bisacetoxy biphenyl whereby an enantiotropic smectic polyesterimide was obtained. Analogous degradation and polycondensation reactions were also performed with nylon 11 and nylon 12. Parallel syntheses were conducted with isolated imide dicarboxylic acids. Furthermore, the crude imide dicarboxylic acid obtained from nylons 6, 11, and 12 were polycondensed in situ with diacetates of hydroquinone or substituted hydroquinone in combination with various amounts of acetoxy benzoic acid or 6‐acetoxy‐2‐naphthoic acid. In this way enantiotropic nematic copoly(ester‐imide)s were prepared. The phase transition of all LC‐poly(ester‐imide)s were characterized by DSC measurement and optical microscopy. In addition, a series of isotropic poly(ester‐imides)s was prepared using nonmesogenic bisphenols, such as bisphenol A, as comonomers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1630–1638, 2000     

Synthesis and properties of novel thermotropic liquid crystalline copoly(ester-imide)s

Four novel copoly(ester-imide)s based on 3,3',4,4'-biphenyltetracarboxylic dianhydride,bis(trimellitic acid anhydride) phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step method in order to investigate whether two imide mesogenic units with different conformation and polarity could control the formation of LC-phase.Polarizes light microscopy(PLM) and differential scanning calorimetry(DSC) have shown that three polymers formed the nematic phase with thread schlieren...     

Poly(aryl ether)s containing o‐terphenyl subunits. III. Random copoly(ether imide)s

The synthesis of a new diamine monomer, N‐n‐butyl 3,12‐diamino‐5,6,9,10‐tetrahydro[5]helicene‐7,8‐dicarboxylic imide (4), that contains a helically locked, U‐shaped 4′,4″‐o‐terphenyl moiety is described. The monomer was polymerized with 3,3′,4,4′‐oxydiphthalic dianhydride and 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane to form a series of copoly(ether imide)s (5a–e). The incorporation of 4 into the poly(ether imide)s varied the glass‐transition temperature of the copolymers of which it was a part. There was a tendency to form macrocyclic materials at higher molar percentages of 4 during polymerization. The fluorescence of all the copoly(ether imide)s gradually decreased as the content derived from monomer 4 increased in the polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 758–763, 2000     

Poly(ethylene terephthalate) reinforced by N,N′‐diphenyl biphenyl‐3,3′,4,4′‐tetracarboxydiimide moieties

Starting with 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and methyl aminobenzoate, we synthesized a novel rodlike imide‐containing monomer, N,N′‐bis[p‐(methoxy carbonyl) phenyl]‐biphenyl‐3,3′,4,4′‐tetracarboxydiimide (BMBI). The polycondensation of BMBI with dimethyl terephthalate and ethylene glycol yielded a series of copoly(ester imide)s based on the BMBI‐modified poly(ethylene terephthalate) (PET) backbone. Compared with PET, these BMBI‐modified polyesters had higher glass‐transition temperatures and higher stiffness and strength. In particular, the poly(ethylene terephthalate imide) PETI‐5, which contained 5 mol % of the imide moieties, had a glass‐transition temperature of 89.9 °C (11 °C higher than the glass‐transition temperature of PET), a tensile modulus of 869.4 MPa (20.2 % higher than that of PET), and a tensile strength of 80.8 MPa (38.8 % higher than that of PET). Therefore, a significant reinforcing effect was observed in these imide‐modified polyesters, and a new approach to higher property polyesters was suggested. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 852–863, 2002; DOI 10.1002/pola.10169     

Thermotropic copolyesters of 4-hydroxybenzoic acid

Copolyesters of 4-hydroxybenzoic acid were prepared by thermal polycondensation of 4-acetoxybenzoic acid with various acetylated comonomers, such as 4-mercaptobenzoic acid, 3-hydroxybenzoic acid, N-(4-carboxyphenyl)4-hydroxyphthalimide or hydroquinone in combination with 1,12-dodecane bistrimellitimide. The copolyesters were characterized by elemental analyses, inherent viscosities, ¹H- or ¹³C NMR spectroscopy, DSC-measurements, WAXS-measurements at temperatures between 25 and 425°C, microscopic observation, thermomechanical and thermogravimetrical analyses. Copolyesters containing 4-mercaptobenzoic acid or N-(4-carboxyphenyl)4-hydroxyphthalimide possess a reversible first order phase transition which represent a change of modifications and not a melting process. Both classes of copolyesters adopt the same kind of high temperature modification as poly(4-hydroxybenzoate), namely a pseudo-hexagonal chain packing. In contrast, copolyesters of 3-hydroxybenzoic acid or copoly(ester imide)s with aliphatic spacer containing more than 50% 4-hydroxybenzoic acid form a nematic phase over a broad temperature range. However, in the case of copolyesters derived from 3- and 4-hydroxybenzoic acid the homogeneous nematic melt is thermodynamically unstable and gradually turns into a heterogeneous more or less crystalline material with blocks of 4-hydroxybenzoate units.     

Studies on thermotropic liquid-crystalline polymers: Part X. Synthesis and properties of crosslinkable aromatic copoly(ester)s containing conjugated double bonds

A series of aromatic copoly(ester)s containing conjugated double bonds was prepared from p-phenylene bis(acrylic acid) (PPBA) with a mixture of methylhydroquinone (MHQ) and various hydroxycarboxylic acids in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC) and thermal optical polarized microscopy. Under an optical polarized microscope all copoly(ester)s show a nematic thermotropic liquidcrystalline phase. Upon heating, these polymers undergo a photocrosslinking reaction characterized by IR and solubility analysis. This crosslinking reaction also takes place in the liquid-crystalline phase with the retention of the nematic order in the final crosslinked solid. © 1993 John Wiley & Sons, Inc.     

Poly(aryl ether)s containing o‐terphenyl subunits. II. Random poly(ether sulfone)s

The synthesis of a new A₂X‐type difluoride monomer, N‐2‐pyridyl‐4′,4″‐bis‐(4‐fluorobenzenesulfonyl)‐o‐terphenyl‐3,6‐dimethyl‐4,5‐dicarboxylic imide ( 3 ), is described. The monomer 3 was incorporated into a series of copoly(aryl ether sulfone)s by polymerization of 4,4′‐isopropylidenediphenol and 4,4′‐difluorophenylsulfone. The incorporation of monomer 3 had an observable effect on both the glass‐transition temperature of poly(aryl ether sulfone)s and the tendency for macrocyclic oligomers to form during polymerization. Replacement of the pyridyl imide group via a transimidization reaction with propargyl amine proceeded quantitatively and without polymer degradation. The acetylene containing copoly(aryl ether sulfone) could be crosslinked by simple thermal treatment, resulting in an increase in the glass‐transition temperature and solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 9–17, 2000     

Synthesis and characterization of novel thermotropic liquid crystalline copoly(ester imide)s

Novel liquid crystalline copoly(ester imide)s were synthesized via polyesterification of triethyleneglycol bis(4-carboxyphenyl) ether ( 1e ), diacetoxybiphenyl, and diacids with imide moieties. The effects of composition on the changes of T_g, T_m, and T_i were examined by global TSC and DSC. Thermal gravimetric analyses (TGA) found that 4a–d and 5a–g possess higher thermal stability. Strong stir opalescence phenomenon and observations from polarized optical microscopy identified that 2b–e and 3a–d possess the typical schlieren texture of an enantiotropic nematic mesophase. The birefrigent melts of 4a–d and 5a–g, however, displayed particular liquid crystalline behavior. Copolymers with higher aromatic imide ring content ( 4a–d, 5a–g ) form a layered structure and an enantiotropic smectic mesophase in the melting state. The melt viscosity of the semetic mesophase was higher than the nematic mesophase which was observed by capillary rheometer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1791–1803, 1998     

Synthesis and characterization of thermotropic liquid crystalline poly(ester imide)s

Two closely series of poly(ester imide)s had been synthesized by solution polycondensation of p‐phenylenebis(trimellitate) dianhydride with aliphatic diamines. The differential scanning calorimetry (DSC) traces of the most poly(ester imide)s exhibited two endotherms representing the solid state to anisotropic phase transition (T_m1) and the anisotropic to isotropic melt transition (T_m2), respectively. Observation under polarizing microscope and wide‐angle X‐ray diffraction (WAXD) measurements suggested that the anisotropic phase formed above the melting points (T_m1) had a smectic character. The thermogravimetric analyses (TGA) revealed that the thermal stabilities of the poly(ester imide)s were up to 350°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 211–218, 1999