Effect of Process Parameters on Laser Damage Threshold of TiO2 Coatings

We investigate the laser damage behaviour of an electron-beam-deposited TiO2 monolayer at different process parameters. The optical properties, chemical composition, surface defects, absorption and laser-induced damage threshold （LIDT） of films are measured. It is found that TiO2 films with the minimum absorption and the highest LIDT can be fabricated using a TiO2 starting material after annealing. LIDT is mainly related to absorption and is influenced by the non-stoichiometric defects for TiO2 films. Surface defects show no evident effects on LIDT in this experiment.     

Research on the UV Dielectric Coatings with High Damage Threshold

ＲｅｓｅａｒｃｈｏｎｔｈｅＵＶＤｉｅｌｅｃｔｒｉｃＣｏａｔｉｎｇｓｗｉｔｈＨｉｇｈＤａｍａｇｅＴｈｒｅｓｈｏｌｄＧＡＯＨｕａｉｌｉｎＳＨＡＮＹｕｓｈｅｎｇＷＡＮＧＮａｉｙａｎ（ＣｈｉｎａＩｎｓｔｉｔｕｔｅｏｆＡｔｏｍｉｃＥｎｅｒｇｙ，Ｐ．Ｏ．Ｂｏｘ...     

Thermal Degradation of Polysiloxane Coatings on E-Glass Fiber. A FTIR Study

Fourier Transform Infrared Spectroscopy and Thermal Analysis have been used to study the thermal and termooxidative degradation of polysiloxane coatings obtained by treating E-glass fiber with aqueous solutions of 3-chloropropyltriethoxysilane. Initial weight losses were due to polymerization of the coatings. Severe oxidative degradations were observed at temperatures above 180°C. At 550°C the residue of the coating was found to be silica with free silanol groups.     

溶胶颗粒度分布对溶胶—凝胶光学增透膜性能的影响

用不同陈化时间的碱性催化的溶胶，经提拉法镀膜，得到不同增透效果的光学膜层。分析发现，随着与陈化时间相产的水解和聚合反应的进程，溶胶的粒度分布发生变化。形成不同粒径的“簇团”，拉膜后，形成不同的孔径分布，由此影响光学透过率特性。     

Ce:KNSBN晶体光扇效应的入射光强度阈值特性研究

采用非同时读出条件下的两波耦合实验装置,以单束光入射Ce:KNSBN光折变晶体,系统研究了Ce:KNSBN晶体中光扇效应随入射光偏振态、入射光强度、光入射角的变化情况.结果表明异常偏振光入射晶体时光扇效应明显,且存在明显的入射光强度阈值特性,入射光强度阈值为38.2 mW/cm2;相同光入射角下,稳态光扇强度随入射光强度的增强而明显变大;对应相同的入射光强度,稳态光扇强度随光入射角θ的增大而增大,当θ为15°时到达峰值,而后随θ的增大而逐渐减小.同时对光扇效应的入射光强度阈值特性以及稳态光扇强度随入射光偏振态、入射光强度、光入射角的变化作出了相应的物理解释.     

光学薄膜界面吸收对温度场的影响

考虑光学薄膜中界面吸收的影响，提出了模拟界面吸收层模型，并对各种膜系的温度场进行了分析计算，文中对样品激光损伤的光热偏转实时观察结果支持了这一模型。     

连续激光辐照下光学材料损伤阈值的光斑效应

实验发现,光学材料的激光损伤阈值对激光光斑大小有强烈的依赖关系。研究了连续激光和匀质材料相互作用的机制,针对小光斑情形的材料响应和大光斑情形的结构响应分别提出各自不同的物理模型来解释光斑效应。研究表明,材料响应中的光斑效应基于热传导引起的光斑区热弥散,边界条件不同,破坏阈值与光斑大小的依赖关系也不尽相同。     

多脉冲激光作用下光学薄膜损伤的累积效应

研究了高反射膜在多脉冲激光作用下损伤的累积效应.实验中使用1064nm调Q的Nd∶YAG激光器,脉宽是12 ns,频率为10 Hz.实验发现:高反射膜的损伤阈值随辐照脉冲数增加而降低,表现出明显的累积效应.通过对损伤阈值和损伤概率以及辐照次数的统计性研究,并结合单脉冲辐照的结果,说明了存在于薄膜中微小的缺陷参与了多脉冲激光对薄膜的损伤过程,得到了制备IBS高反射膜的损伤阈值和照射次数的关系式,用Nomarski偏光显微镜观察了实验过程中样品的损伤形貌,发现是典型的缺陷损伤.     

半导体材料的激光辐照效应计算和损伤阈值分析

在激光对抗中,探测器容易受到激光损伤,为此研究了连续强激光对半导体材料的损伤机理,建立了氧碘化学激光器辐照InSb圆板型靶材的二维物理模型。在圆柱坐标系中利用积分变换法,求解热传导和热弹性力学方程组。得到由激光辐照引起的温度场和热应力场的瞬态分布。经过严格的理论分析,计算出InSb材料的激光破坏阈值,讨论了,不同的辐照时间和光斑半径对破坏阈值的影响。研究发现其破坏形态为熔融破坏,一般不会出现解理或炸裂现象,这一结果与相关实验报道一致。最后分析了与温度有关的非线性参量对损伤阈值的影响。     

超疏水纳米结构表面池沸腾特性

本文通过采用物理气相沉积法于TiO2纳米管阵列表面修饰一层聚四氟乙烯(PTFE)纳米颗粒,得到超疏水表面,并研究此超疏水纳米结构表面的池沸腾特性.研究表明,超疏水纳米结构表面沸腾特性类似于膜沸腾,沸腾工质难以浸润该表面,其沸腾传热系数及临界热流密度均较低.分析表明,固液处于Cassie-Baxter接触状态,纳米结构表...     

Effect of Vacuum on the Laser-Induced Damage of Anti-Reflection Coatings

In the comparison of damage modifications, absorption measurement and energy dispersive x-ray analysis, the effect of vacuum on the laser-induced damage of anti-reflection coatings is analyzed. It is found that vacuum decreases the laser-induced damage threshold of the films. The low laser-induced damage threshold in vacuum environments as opposed to air environments is attributed to water absorption and the formation of the O/Si, O/Zr sub-stoichiometry in the course of laser irradiation.     

低阈值极化电压玻璃光波导电光效应的研究

采用热极化技术对掺锗玻璃条形光波导进行极化,通过光纤连接 (单模) 的Mach Zehnder Interferometer 系统测量条形波导内诱导出的电光效应,系统地研究了大气环境下极化条件(极化温度、极化时间、极化电压)对电光效应的影响.结果表明:在最佳极化条件下(406℃、-2.4 kV、20 min),波导内的电光系数为r_TM=0.059±0.001 pm/V, r_TE=0.053±0.001 pm/V,且波导结构中存在一个较低的阈值极化电压(100 V)和阈值极化温度(80℃),此时在波导样品内仍能被激发出可观察的电光效应;实验还发现采用负极化诱导方式产生的电光系数较正极化提高15%左右.     

The Abrasion Behavior and Mechanisms of a Superhydrophobic Surface Comprising Styrene Butadiene Rubber

The microprotuberances of superhydrophobic surfaces are easily destroyed during a friction cycle, resulting in invalidation of superhydrophobicity, because they are then loaded with pressure and shearing stress. Thus, the abrasion-resistance of superhydrophobic surfaces is the main barrier preventing their wide application. Elastic microprotuberances will be compressed and collapsed by elastic deformation to avoid being broken during a friction cycle, and the deformation will rebound to renew the original surface structure when the load is withdrawn. A superhydrophobic surface comprising styrene butadiene rubber (SBR) was fabricated via template replication in the research described here, with a water contact angle up to 160°. Friction testing was then used to characterize the abrasion resistance of the surface; the contact angle remained more than 139° even after being loaded with 4.4 KPa or 6.87 KPa and rubbed by a smooth metal surface at 18 cm/s for 10,000 times. Scanning electron microscopy was used to characterize the change of morphology before and after the friction testing and to explain the abrasion mechanism.     

Quantum Dissipative Threshold and Its Effect on Decay of Metastable State

The coupling between system and reservoir is considered to be linear in the coordinates of the bath but nonlinear in the system‘s coordinate. A dissipative threshold is observed at finite temperatures due to nonlinear dissipation. The quantum decay rate of a metastable state including higher-order expanded terms of the coupling form function is proposed, which can be strongly decreased at finite temperatures when the quantum dissipative threshold is added to the saddle point of the potential.     

Strain Effect on the Absorption Threshold Energy of Silicon Circular Nanowires

In this work,the influence of strain on threshold energy of absorption in Silicon circular nanowires is investigated.For this purpose,we first have used the density functional theory(DFT) to calculate the electron and hole effective masses.Then,we have obtained absorption threshold energy with two different procedures,DFT and effective mass approximation(EMA).We have also obtained the band structures of Si nanowires both DFT and EMA.The results show that:i) the expansive strain increases the hole effective mass while compressive strain increases the electron effective mass,ii) the electron and hole effective masses reduce with decreasing the wire size,iii) the absorption threshold energy decreases by increasing strain for compressive and tensile strain and its behavior as a function of strain is approximately parabolic,iv) the absorption threshold energy(for all sizes) obtained using EMA is greater than the DFT results.     

Quantum Dissipative Threshold and Its Effect on Decay of Metastable State

The coupling between system and reservoir is considered to be linear in the coordinates of the bath but nonlinear in the system＇s coordinate. A dissipative threshold is observed at finite temperatures due to nonlinear dissipation. The quantum decay rate of a metastable state including higher-order expanded terms of the coupling form function is proposed, which can be strongly decreased at finite temperatures when the quantum dissipative threshold is added to the saddle point of the potential.     

Effect of Droop Phenomenon in InGaN/GaN Blue Laser Diodes on Threshold Current

Electroluminescence(EL) and temperature-dependent photoluminescence measurements are performed to study the internal quantum efficiency droop phenomenon of blue laser diodes(LDs) before lasing. Based on the ABC mode, the EL result demonstrates that non-radiative recombination rates of LDs with threshold current densities of 4 and 6 kA/cm~2 are similar, while LD with threshold current density of 4 kA/cm~2 exhibits a smaller augerlike recombination rate compared with the one of 6 kA/cm~2. The internal quantum efficiency droop is more serious for LD with higher threshold current density. The internal quantum efficiency value estimated from temperature-dependent photoluminescence is consistent with EL measurements.     

Threshold Effect in the Photoemission of Composite Nanoantennas Irradiated by Intense Femtosecond Laser Pulses

JETP Letters - A new mechanism has been proposed for the formation of energy spectra of photoelectrons by above-threshold photoemission of composite nanoantennas with small gaps between elements...     

Mass-analyzed Threshold Ionization Spectroscopy of Rotamers of p-ethoxyphenol Cations and Configuration Effect

利用双色双光子质量分辨的阈值电离光谱技术,研究了对位乙氧基苯酚顺式和反式两种构型的离子态振动特性. 测得顺式和反式精确的绝热电离势分别为61565±5和61670±5 cm^-1. 与对位甲氧基苯酚实验结果比较,顺式和反式的测得的绝热电离势分别降低了645和643 cm^-1. 从所得到的两种构型的高分辨离子态光谱中,可知顺式和反式不同构型对苯环平面的振动影响很小,而低频率的C-OC₂H₅弯曲振动在两种构型中都很活跃.     

空气电极/AC作载体对TiO2光催化性能的影响

研究了空气电极和活性碳 (AC)作载体对TiO2 光催化氧化活性艳红 (K 2BP)性能的影响 .实验结果表明 ,用空气电极 /AC作载体能显著提高TiO2 的光催化反应速度 ;空气电极不仅具有良好的合成H2 O2 的性能 ,而且对TiO2 光催化剂可产生大约 +0 .5V的偏压作用 ,大大减小了TiO2 光生电荷的复合几率 ;AC对有机物分子良好的吸附作用提高了有机物分子在TiO2 表面及周围的富集浓度 ,其含量在 2 1%左右可使光催化剂达到最佳的催化效果 .复合电极工作电流密度对活性艳红的氧化脱色速度有影响 ,i=15mA/cm2 ,速度达到最大 ;活性艳红分子在复合电极表面的吸附受溶液pH值的影响 ;提出了复合电极的工作原理 .