PLGA-(PEG-ASP)n共聚物的合成与性能研究

以辛酸亚锡[Sn(Oct)2]为催化剂,聚乙二醇／L-天冬氨酸预聚物[(PEG-ASP)n]为共引发剂,引发D,L—LA和GA开环共聚合成具有功能侧氨基的PLGA-(PEGASP)n共聚物。通过FTIR、^1H—NMR、DSC、表面接触角测定和细胞培养等方法研究共聚物的结构与性能。结果表明,共聚物为典型的非晶态聚合物;共聚物的亲水性以及对骨髓基质细胞的粘附能力和粘附效率均明显优于PLGA。     

含不同侧氨基密度的PLGA-(ASP-Diol)x-PLGA共聚物的合成与表征

以N-(苄氧羰基)-L-天冬氨酸和亚硫酰氯反应制备了N-苄氧基天冬氨酸酐,将其与不同链长的二醇(乙二醇、二缩三乙二醇、聚乙二醇200和600)缩聚,合成了含端羟基的天冬氨酸-二醇交替预聚物(ASP-Di-ol)x;以其为大分子引发剂,辛酸亚锡为催化剂进行丙交酯/乙交酯(摩尔比75∶25)开环共聚,合成系列含侧氨基的天冬氨酸-二醇-聚乙丙交酯[PLGA-(ASP-Diol)x-PLGA]多元三嵌段共聚物.用FTIR,1HNMR,EA,DSC和GPC对共聚物结构进行表征.结果表明,影响预聚物分子量的主要因素不是二醇的分子量,而是其端羟基的活性.随着二醇链段长度增加,多元共聚物中氨基含量降低,玻璃化转变温度也明显下降.通过改变二醇链段的长度(或分子量)可有效地控制PLGA-(ASP-Diol)x-PLGA中侧氨基的密度及分布.     

丙交酯-乙交酯共聚中的酯交换及共聚物结构和性质研究

以辛酸亚锡为催化剂 ,通过本体开环聚合合成了不同摩尔比的DL 丙交酯 乙交酯 (DL LA GA)共聚物 (PDL LGA) .1 H和1 3C NMR以及DSC结果表明 ,共聚物中GA结构单元的含量略高于按GA投料比计算的结果 ,聚合过程中存在二级酯交换反应 .当聚合温度为 16 0℃时 , GG 序列的平均长度 (lGG)随GA摩尔投料比增大而增长 ,而 LL 序列的平均长度 (lLL)则相反 .研究发现 ,随着GA摩尔投料比降低 , LL 单元的二级酯交换系数 (TⅡ[GLG])下降 ,至GA摩尔投料比达到为 5 0 %时最小 ,而后却逐渐增大 .L LA与GA在同样的条件下聚合 ,TⅡ[GLG]和lGG 都比DL LA与GA聚合的大 .聚合温度升高 ,TⅡ[GLG]增大 ,意味着二级酯交换反应加剧 ,但DL LA GA摩尔投料比较高 (75 2 5 )的共聚物的lGG 值有所下降 ,lLL值变化不大 ,而DL LA GA摩尔投料比较低 (5 0 5 0 )的共聚物的lGG值则变化不大 ,lLL值有所下降 ,说明聚合反应还受共聚单体的投料比和其它因素影响 .升高聚合温度比在较低温度下延长反应时间更有效改变共聚物的链结构 .在一定温度下聚合 ,共聚产物的Tg 随GA摩尔投料比增大而有规律降低和在氯仿中的溶解性下降 ;而DL LA GA摩尔投料比一定时 ,聚合温度对共聚物的Tg 的影响较为复杂 ,这与聚合温度对共聚物的链结构影响较大有关 .     

侧链含炔丙基的PLGA-PEG-PLGA三嵌段共聚物的合成与表征

通过简单易行的技术路线合成了炔丙基化乙交酯单体,以1,4-二甲氨基吡啶为催化剂,亲水性和生物相容性良好的聚乙二醇为大分子引发剂,在较滥条件下引发炔丙基化乙交酯和丙交酯的开环共聚,制备了侧链含炔丙基的聚(乳酸-羟基乙酸)-聚乙二醇-聚(乳酸-羟基乙酸)(PLGA-PEG-PLGA)三嵌段共聚物,并对产物的组成与结构进行了表征.为生物孤犊触乳聚酯的分子修饰、生物相容性的提高探索一条简单而有效的途径     

含侧羧基官能团的聚(ε-己内酯)降解性能的研究

在异辛酸亚锡催化下, ε-己内酯与官能团化ε-己内酯单体6-(乙酸苄基酯基)-ε-己内酯(BCL)开环共聚合成含有侧乙酸苄基酯基的ε-己内酯/6-(乙酸苄基酯基)-ε-己内酯共聚物(PCL-co-PBCL). 然后通过钯/碳催化加氢脱除PCL-co-PBCL的苄基保护基, 得到含侧乙羧基官能团的ε-己内酯/6-乙酸基-ε-己内酯共聚物(PCL-co-PCCL). 研究了两种聚合物的力学性能、表面亲水性及其在37 ℃温度下在不同pH值的缓冲溶液中的降解行为. 实验结果表明: 侧基官能团, 尤其是侧乙羧基官能团的引入可明显改善聚己内酯的亲水性和降解性, 且降解速度可通过控制聚合物中官能团的含量来进行调节.     

AB型两亲聚L-谷氨酸-苄酯-聚乙二醇嵌段共聚物的合成与表征

利用L 谷氨酸和苯甲醇反应制备了L 谷氨酸 苄酯 ,然后将其与三聚光气反应制备了N 羧基 L 谷氨酸 环内酸酐 (NCA) .以聚乙二醇单甲醚 (MPEG)为原料 ,制备了端氨基聚乙二醇单甲醚 (MPEG NH2 ) ,并以此作为引发剂 ,引发NCA开环聚合 ,合成了不同分子量的聚L 谷氨酸 苄酯 聚乙二醇单甲醚 (PBGM )嵌段共聚物 .利用IR、1 H NMR、DSC、GPC等方法对共聚物结构进行了表征 .结果表明 ,MPEG NH2 引发NCA开环聚合得到的是嵌段共聚物 ,通过1 H NMR谱得到共聚物组成及数均分子量 ;随着共聚物中MPEG含量的增高 ,聚L 谷氨酸 苄酯的亲水性有所改善     

PCL-PEG-PCL嵌段共聚物的合成与性能

研究了氮气保护下，以辛酸亚锡和聚乙二醇为共引发剂，引发ε－己内酯的开环聚合反应。在聚乙二醇（PEG）链段分子量保持不变的情况下，全盛了不同分子量聚己丙酯链段的PCL－PEG－PCL三嵌段共聚物，以及不同分子量PEG链段而聚己内酯链段相同的嵌段共聚物。采用GPC、DSC、FTIR、^1H-NMR及吸水性测试等分析手段表征了共聚物的结构和性能。结果表明聚合反应为可控反应，可通过调整聚乙二醇与ε－己内酯的比例来控制聚合物的分子量；聚乙二醇组分的引入有效地改善了聚合物的亲水性，并破坏了其结晶性。     

甲氧基聚乙二醇-b-聚L-半胱氨酸两亲性嵌段共聚物的合成与表征

首先以聚乙二醇单甲醚(mPEG-OH)为单体,采用经典的盖布瑞尔伯胺合成法合成了端氨基聚乙二醇单甲醚(mPEG-NH_2);然后以mPEG-NH_2为引发剂,S-苄基L-半胱氨酸N-羧酸内酸酐(BCys-NCA)为原料,通过N-羧酸内酸酐(NCA)开环聚合反应和液氨/钠处理脱除侧链上的保护基团,合成了两亲性嵌段共聚物甲氧基聚乙二醇-b-聚L-半胱氨酸(mPEG-b-PCys)。采用傅里叶变换红外光谱、核磁共振氢谱对聚合物的结构和组成进行了表征。结果表明:成功制备了侧链具有还原性巯基的两亲性嵌段共聚物mPEG-b-PCys,并且其聚合度可控性良好。     

温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2- 唑啉)-b-聚(ε-己内酯) -b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

Synthesis and characterization of biodegradable materials： PDLLA-（MAh-Diol）n-PDLLA copolymer

The novel biodegradable copolymer PDLLA-(MAH-Diol)_n-PDLLAwith unsaturated bond was synthesized by copolymerizing lactide and prepolymer, which was prepared by the polycondensation of maleic anhydride and poly(ethylene glycol), using p- toluene sulphonic acid as catalyst. The new copolymer has improved hydrophilicity and fexibility. The structure and properties of the novel polymers were studied by FTIR, NMR, GPC-MALLS and DSC.     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

聚对二氧环己酮/聚乙二醇多嵌段共聚物的合成与表征

首先合成双端羟基的聚对二氧环己酮预聚物(PPDO)和双端羧基的聚乙二醇预聚物(PEG),然后以丁二酸酐/二环己基碳二亚胺(DCC)将PPDO与PEG偶联共聚,得到PPDO/PEG多嵌段共聚物.通过1H-NMR和GPC表征了聚合物的结构和分子量.采用差示扫描量热法(DSC)和热重分析(TGA)研究了共聚物的结晶性能和热稳定性.用透析法制备了共聚物纳米粒子,并用动态光散射(DLS)表征了共聚物纳米粒子的粒径及分散度,结果表明,随着共聚物亲水链段PEG含量的增加,其纳米粒子更易形成,粒子粒径随共聚物分子量增大而增大.     

Amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) copolymers: One-pot synthesis,self-assembly,and controlled drug release

A set of amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) (PEG-b-PEB) copolymers based on the PEB hydrophobic block was first synthesized by ring-opening polymerization of ethylene brassylate with an organic catalyst. The EB/PEGmolar ratios and reaction times were adjusted to achieve different chain lengths of PEB. Block copolymers that were characterized by ¹H NMR and GPC could selfassemble into multimorphological aggregates in aqueous solution, which were characterized by DLS and TEM. The hydrophobic doxorubicin (DOX) was chosen as a drug model and successfully encapsulated into the nanoparticles. The release kinetics of DOX were investigated.     

聚乙二醇-b-聚乳酸的合成及其电纺形成超细纤维研究

为了提高聚乳酸的亲水性,以辛酸亚锡为催化剂、聚乙二醇单甲醚(mPEG)为大分子引发剂进行丙交酯(LLA)开环聚合,合成聚乙二醇-b-聚乳酸两嵌段共聚物(PELA).以红外光谱1、H核磁共振谱、接触角测试、差热扫描量热分析等方法对PELA的结构及性能进行表征.结果表明,通过调控mPEG与LLA的投料比可以控制PELA的相对分子质量,而随着mPEG组分含量或链长增加,共聚物亲水性增强,但其Tg、Tcc、Tm有所降低.由普通电纺制备PELA超细纤维,并分别由乳液电纺和同轴电纺得到以水溶性聚氧化乙烯(PEO)为芯、PELA为壳的芯/壳结构复合超细纤维(E-PEO/PELA和C-PEO/PELA).扫描电镜和透射电镜结果表明,PELA、E-PEO/PELA和C-PEO/PELA超细纤维形貌良好.随着PELA中mPEG含量的增加,电纺PELA纤维膜的吸水率增强,而由乳液电纺和同轴电纺制备的PEO/PELA芯/壳结构超细纤维膜,亲水性均好于PELA超细纤维膜.     

Mechanical,aging, optical and rheological properties of toughening polylactide by melt blending with poly(ethylene glycol) based copolymers

Two novel biodegradable copolymers, including poly(ethylene glycol)-succinate copolymer (PES) and poly(ethylene glycol)-succinate-l-lactide copolymer (PESL), have been successfully synthesized via melt polycondensation using SnCl₂ as a catalyst. The copolymers were used to toughen PLA by melt blending. The DSC and SEM results indicated that the two copolymers were compatible well with PLA, and the compatibility of PESL was superior to that of PES. The results of tensile testing showed that the extensibility of PLA was largely improved by blending with PES or PESL. At same blending ratios, the elongation at break of PLA/PESL blends was far higher than that of PLA/PES ones. The elongation maintained stable through aging for 3 months. The moisture absorption of the blends enhanced due to the strong moisture absorption of PEG segments in PES or PESL molecules, which did not directly lead to enhance the hydrolytic degradation rate of the PLA. The PLA blends containing 20–30 wt% PES or PESL were high transparent materials with high light scattering. The toughening PLA materials could potentially be used as a soft biodegradable packaging material or a special optical material.     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Polycaprolactone–poly(ethylene glycol) block copolymer,I: synthesis and degradability in vitro

A new type of biodegradable polymer material, poly(caprolactone)–poly(ethylene glycol) block copolymer (PCL-b-PEG), was synthesized by means of direct copolycondensation of ε-caprolactone with poly(ethylene glycol) in the presence of a Ti(OBu)₄ catalyst. The degradability of the polycaprolactone was improved by introducing a PEG component into it. The degradation of PCL-b-PEG copolymer increase with a decreasing crystallinity of the copolymer, and can be controlled by adjusting the component ratio of the copolymer.     

PEG链段对聚乙二醇接枝聚苯胺结构与性能的影响

将苯胺(An)与甲氧基聚乙二醇邻氨基苯基醚氧化共聚,制备了梳状接枝共聚物PAn-g-PEG.研究了梳状接枝共聚物的UV-Vis、微观结构、热稳定性和溶解成膜性等随侧链聚乙二醇(PEG)链段的变化规律.结果表明随PAn-g-PEG中PEG链段长度和含量的提高,共聚物的溶解性和成膜性能显著提高,电子导电率缓慢降低,热稳定性变差.共聚物具有微相分离结构,其形态随PEG链段的改变分别为“海-岛相”和“双连续相”;提高PEG链段长度和含量,PAn-g-PEG能形成稳定的水溶性分散体系,并能浇注成柔韧平整的导电高分子自支撑膜.