pH敏感新型嵌段共聚物的合成及其对叶酸的运载与释放

采用可逆加成-断裂链转移(RAFT)法,成功合成了一种具有荧光性能的新型p H敏感两亲性嵌段共聚物聚(甲基丙烯酰氧喹啉-co-甲基丙烯酸-2-二甲氨基乙酯)-b-聚(甲基丙烯酸聚乙二醇酯)(P(MAQ-co-DMAEMA)-b-PMAPEG),用红外光谱(FT-IR)、核磁共振(1H NMR)、凝胶渗透色谱(GPC)对其结构进行表征.此共聚物在水溶液中可自组装形成胶束,由扫描电子显微镜(SEM)、动态光散射(DLS)、紫外光谱(UV)和荧光光谱(FL)对聚合物胶束溶液表征可知胶束为尺寸约80 nm的球形颗粒,且胶束溶液具有良好的荧光性.以叶酸(FA)为模型药物,研究载药胶束在模拟人体环境中的控释行为.结果表明:P(MAQ-co-DMAEMA)-b-PMAPEG可作为包载药物的一种新型纳米材料,载药胶束的体外释放呈明显p H依赖性,且具有较好的荧光性,该聚合物有望成为具有荧光性的理想药物载体.     

双重敏感mPEG-PDPA-P(AAm-co-AN)聚合物自组装体的药物递送

设计合成了一种新型两亲性三嵌段ABC聚合物聚乙二醇单甲醚-聚甲基丙烯酸二异丙胺基乙酯-聚(丙烯酰胺-co-丙烯腈)(mPEG-PDPA-P(AAm-co-AN))。该聚合物具有pH敏感嵌段PDPA和温度敏感嵌段P(AAm-co-AN)，临界溶解温度(UCST)较高，且可以通过改变单体比例来调节UCST。在室温、中性环境下，该聚合物通过自组装形成刺激响应型胶束，可用于抗肿瘤药物的控释研究。温度升高诱导聚合物胶束向不对称囊泡结构转变，pH降低促使聚合物形成更加松散的胶束。在体外释药探究中，聚合物胶束对亲水药物阿霉素(DOX)和疏水药物槲皮素都具有良好的载药效果，在37℃、pH=7.4的条件下泄漏量低，随着温度升高和pH降低，胶束释放药物的速率和释放量明显增加。     

磷脂微乳电动色谱的定量结构保留关系研究

以大豆磷脂为主要的表面活性剂,制备适合毛细管电动色谱使用的不同构成比的微乳体系, 应用溶剂化参数模型研究了中性溶质在其中的定量结构保留关系.使用动态涂层毛细管, 以二甲基亚砜和十二烷基苯分别作为电渗流和微乳液滴迁移的标记物, 测定了26个具有不同结构小分子中性化合物在17种微乳电动色谱体系下的保留因子, 建立了线性溶剂化能量关系(LSER)方程.通过比较两体系的LSER方程系数比较体系相似性.结果表明, 本研究建立的磷脂微乳电动色谱体系在线性溶剂化特征上和其它构成的微乳电动色谱体系相似.对溶质保留贡献较大的是溶质体积和有效氢键碱度, 油相种类及浓度对溶质的保留选择性无明显影响.     

嵌段-接枝共聚物SEPG与PS(OH)之间的氢键络合导致胶束化的研究

利用原子转移自由基聚合反应合成了以聚苯乙烯-b-聚(乙烯-co-丙烯)(SEP)为主链、无规分布且数目可控的聚甲基丙烯酸乙酯(PEMA)为支链的嵌段接枝共聚物SEPG.发现在甲苯中因支链PEMA与聚(苯乙烯-co-对六氟羟丙基-α-甲基苯乙烯)[简称PS(OH]的氢键络合作用和EP嵌段的溶解作用导致了聚集体的胶束化.研究了胶束的尺寸及其分布对PS(OH)中羟基含量和共混物组成的依赖性.     

新型水溶性共轭嵌段含糖聚合物的合成与表征

以两端溴化的聚9,9-二己基芴作为大分子引发剂, 6-O-甲基丙烯酰基-1,2∶3,4-二-O-异亚丙基-D-吡喃型半乳糖(6-O-Methacryloyl-1,2∶3,4-di-O-isopropylidene-D-galactopyranose, MaIpGa)为单体, 氯化亚铜/1,1,4,7,10,10-六甲基三乙基四胺为催化剂, 通过原子转移自由基聚合(ATRP), 合成了一种新型的具有良好光学性能的三嵌段共聚物聚甲基丙烯酸羟基保护半乳糖酯-聚芴-聚甲基丙烯酸羟基保护半乳糖酯(PMaIpGa-PF-PMaIpGa). 在酸性条件下进一步水解, 得到水溶性的聚甲基丙烯酸半乳糖酯-聚芴-聚甲基丙烯酸半乳糖酯(PMaGa-PF-PMaGa)三嵌段聚合物, 其结构和分子量(分布)通过核磁共振、红外光谱和凝胶渗透色谱(GPC)确证, 并研究了其紫外-可见和荧光光谱特性.     

ARGET ATRP 与ROP 结合制备pH 响应两亲性聚合物分子刷及其自组装研究

结合电子转移活化剂再生-原子转移自由基聚合(ARGET ATRP)和开环聚合(ROP)法合成了一种具有无规疏水/ pH 响应结构的两亲性聚合物分子刷聚(甲基丙烯酸聚丙交酯酯-co-甲基丙烯酸)-b-聚甲基丙烯酸单甲氧基聚乙二醇酯 [P(PLAMA-co-MAA)-b-PPEGMA]. 通过核磁共振氢谱(¹H NMR)和凝胶渗透色谱(GPC)表征了聚合物的结构、分子量及分子量分布. 优化了反应条件并合成出分子量可控、分子量分布窄的聚合产物. 采用动态光散射法(DLS)、扫描电子显微镜(SEM)研究了聚合物分子刷在水溶液中自组装胶束的粒径、形貌及pH 响应行为. P(PLAMA-co-MAA)-b-PPEGMA 自组装形成粒径分布均匀的球形胶束. 且随着溶液pH 值从7 降低至3, 胶束中的PMAA 逐渐去离子化, 溶胀的胶束逐渐收缩, 粒径由200～300 nm 减小至150 nm 左右; 但当pH 值减小到2 以下, 胶束表面电荷量非常小, 胶束聚集, 使得粒径增大.     

聚(L-丙氨酸-co-羟丙-L-谷氨酰胺)无规共聚物的两亲性及其胶束行为研究

采用丙氨酸作为疏水聚合单体,谷氨酸作为亲水聚合单体,一步开环聚合反应,合成了具有两亲性的聚氨基酸无规共聚物.利用IR,1H-NMR等方法对所合成的聚合物进行了详细的表征,结果表明两种单体都能够按照投料比参加聚合反应生成无规共聚物.对比聚丙氨酸-聚羟丙谷氨酰胺嵌段共聚物,探讨了无规共聚物与嵌段共聚物在两亲性及结构性质上的差异和特点.研究表明,聚(L-丙氨酸-co-羟丙-L-谷氨酰胺)无规共聚物与嵌段共聚物一样,具有两亲性,在水溶液中也能够形成胶束,但胶束尺寸较嵌段共聚物要小,胶束形态也不像嵌段共聚物是规整的球形.实验发现,亲疏水单体的比例对胶束的形成有很大影响,P(A10-co-HPG40)所制得的胶束分散最为均匀.所形成的胶束以疏水的聚丙氨酸为内核,亲水的聚羟丙谷氨酰胺为外壳.     

浊度法表征温敏性微凝胶体积的相转变行为

以N-异丙基丙烯酰胺(NIPAM)、甲基丙烯酸(MAA)为单体,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,制备了温敏性聚(N-异丙基丙烯酰胺)(PNIPAM)和具有温度、pH敏感性的聚(N-异丙基丙烯酰胺-co-甲基丙烯酸)(PNIPAM-MAA)微凝胶。通过测定不同温度和pH条件下微凝胶浊度变化,表征微凝胶的温度及pH敏感性,描述了NaCl浓度和pH对微凝胶体积相转变温度的影响。同时,测定了微凝胶的临界聚沉浓度及临界絮凝温度,表征了微凝胶的稳定性,讨论了影响微凝胶的稳定性因素。     

叶酸封端的聚(碳酸酯-co-乙二醇)嵌段共聚物的合成及其胶束的制备

在不添加催化剂的情况下,通过聚乙二醇单甲醚(mPEG)引发5,5-二甲基-1,3-二噁烷-2-酮(DTC)本体开环聚合,得到了生物可降解脂肪族聚(碳酸酯-co-乙二醇)(DMP)两亲性嵌段共聚物。将其与叶酸(FA)反应,合成了末端含有叶酸的生物可降解两亲性嵌段共聚物(FA-DMP)。所得聚合物结构经傅里叶变换红外光谱(FT-IR)、核磁共振谱(1 H-NMR)、紫外光谱(UV-Vis)、凝胶渗透色谱(GPC)表征。利用聚合物FA-DMP的两亲性结构特点,采用透析法制备了其聚合物胶束。结果表明,在不添加任何催化剂的情况下,利用mPEG的端羟基可成功引发DTC开环聚合,且通过改变投料比可调控DMP嵌段共聚物的分子量;FA-DMP聚合物可形成具有一定纳米尺寸的胶束,且其粒径与聚合物的亲水-疏水链链长有关。     

复合分子印迹聚合物体系选择性富集蛋白质样品中的溶菌酶

考察了功能单体与模板蛋白的反应摩尔比、溶液pH值及离子强度对功能单体与模板蛋白之间相互作用的影响, 得出制备分子印迹聚合物的最佳条件. 在最佳条件下, 以溶菌酶(Lyz)为模板分子, 丙烯酰胺(AA)和N,N’-亚甲基双丙烯酰胺(BisAA)为聚合基质, 二氧化硅为固体制孔剂, 制备了复合分子印迹聚丙烯酰胺凝胶, 并用平衡吸附实验研究了其吸附性能和识别选择性. 研究结果表明, 该聚合物对模板蛋白有较高的亲和性、选择性和吸附容量,可以从蛋白质混合溶液中分离富集模板分子.     

Electrokinetic chromatographic characterization of novel catanionic surfactants vesicle as pseudostationary phase

A novel catanionic surfactants vesicle system composed of octyltriethylammonium bromide/ sodium dodecyl benzene sulfonate (C₈NE₃Br/SDBS) has been developed as pseudostationary phase (PSP) in EKC. The C₈NE₃Br/SDBS system possesses a large vesicle phase region and none of agglomeration phenomena appeared while mixing cationic and anionic surfactants at any molar ratio. Electrophoretic and chromatographic parameters including elution window, hydrophobic selectivity, polar group selectivity, and shape selectivity were characterized using the vesicle at molar ratio of C₈NE₃Br to SDBS of 3:7 as PSP. Compared with SDS micelles, the vesicle PSP possessed a wider elution window and a better selectivity. The retention behavior and selectivity differences between the novel vesicle and SDS micelles were evaluated through linear solvation energy relationship (LSER) analysis. Though the cohesiveness and the hydrogen bond acidity have greatest influences on the solutes retention and selectivity in both the vesicle and SDS micelle, the vesicle PSP demonstrated a higher hydrophobicity and a lower hydrogen bonding donating capability owing to compact bilayer structure of vesicle. Additionally, the vesicle system had a stronger hydrogen bond accepting capability than SDS micelle. Consequently, according to LSER analysis, the bigger coefficients for v, b, and a revealed the vesicle PSP had a better separation selectivity than conventional SDS micelle.     

Application of linear solvation energy relationships to polymeric pseudostationary phases in micellar electrokinetic chromatography

Polymerized sodium 11-acrylamidoundecanoate (poly(Na 11-AAU)) was used as a pseudostationary phase (PSP) for micellar electrokinetic chromatography to separate uncharged compounds. The polymer PSP showed signifcantly different solute migration behaviors from conventional micelles including sodium dodecyl sulfate and poly (sodium 10-undecylenate), giving high separation efficiencies (>200000 theoretical plates/m). Linear solvation energy relationships were used to evaluate and characterize the chemical interactions that influence the retention behavior in the poly (Na 11-AAU) micellar system. It was found that the solute volume and solute hydrogen bond basicity mainly influenced the retention. The characteristic feature of the poly (Na 11-AAU) micellar system is that the micelle has a significantly higher capacity for dipole-dipole and dipole-induced dipole interactions as well as a slightly higher capacity for electron pair interactions than the aqueous phase. Due to its unique selectivity, the poly(Na 11-AAU) micellar system would become an attractive new option for selectivity optimization on methods development.     

Binary mixed micelles of chiral sodium undecenyl leucinate and achiral sodium undecenyl sulfate: I. Characterization and application as pseudostationary phases in micellar electrokinetic chromatography

Sodium 10-undecenyl sulfate (SUS), sodium 10-undecenyl leucinate (SUL) and their five different mixed micelles at varied percent mole ratios were prepared. The critical micelle concentration (CMC), C₂₀, γ_CMC, partial specific volume, methylene group selectivity, mobilities and elution window were determined using a variety of analytical techniques. These surfactant systems were then evaluated as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC). As a commonly used pseudostationary phase in MEKC, sodium dodecyl sulfate (SDS) was also evaluated. The CMC values of SUS and SUL were found to be 26 and 16 mM, respectively, whereas the CMC of mixed surfactants was found to be very similar to that of SUL. The C₂₀ values decreased dramatically as the concentration of SUL is increased in the mixed micelle. An increase in SUL content gradually increased the methylene group selectivity making the binary mixed surfactants more hydrophobic. Linear solvation energy relationships (LSERs) and free energy of transfer studies were also applied to predict the selectivity differences between the surfactant systems. The cohesiveness and the hydrogen bond acidic character of the surfactant systems were found to have the most significant influence on selectivity and MEKC retention. The SUS and SDS showed the strongest while SUL showed the weakest hydrogen bond donating capacity. The basicity, interaction with n and π-electrons of the solute and dipolarity/polarizability were the least significant factors in LSER model for the surfactant systems studied. Free energies of transfer of selected functional groups in each surfactant systems were also calculated and found to be in good agreement with the LSER data.     

Polymeric sulfated surfactants with varied hydrocarbon tail: II. Chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships study

The effect of hydrocarbon chain length on chemical selectivity in micellar electrokinetic chromatography (MEKC) was investigated using polymeric sulfated surfactants: poly-(sodium 7-octenyl sulfate), poly(sodium 8-nonenyl sulfate), poly(sodium 9-decenyl sulfate), and poly(sodium 10-undecenyl sulfate). Linear solvation energy relationships (LSERs) and free energy of transfer studies were conducted to predict the selectivity differences between the four polymeric surfactants. The overall nature of the solute/ polymeric micelle interactions was found to be different despite the fact that all polymeric surfactants have the same head group. The polar character and acidic strength of the polymeric surfactant are found to decrease as the hydrocarbon chain length of the surfactant is increased. On the other hand, the polarizability of the polymeric sulfated surfactants increases (upon interacting with solute lone-pair electrons) with increasing hydrocarbon chain length. The LSER results show that the solute size and hydrogen bond accepting ability play the key roles in MEKC retention.     

Statistical evaluation of linear solvation energy relationship models used to characterize chemical selectivity in micellar electrokinetic chromatography

Characterization of retention and selectivity differences between surfactants in micellar electrokinetic chromatography (MEKC) using linear solvation energy relationships (LSERs) has been given a significant amount of attention in the last four years. This report evaluates the validity of using the two LSER models that have been used to fit retention in MEKC in the literature. The results and the fit of the revised model and parameters developed by Abraham and coworkers are compared to the original model developed by Kamlet, Taft, and coworkers. LSERs can generally only be used as a comparative tool to describe the selectivity differences between surfactant systems used in MEKC. With this in mind, it was determined that the results of both models essentially provide the same information about these differences. However, the revised model and parameters have been found to yield a statistically better fit of the MEKC retention data as well as providing more chemically sound LSER coefficients.     

Comparison of a polymeric pseudostationary phase in EKC with ODS stationary phase in RP‐HPLC

Poly(stearyl methacrylate‐co‐methacrylic acid) (P(SMA‐co‐MAA)) was induced as pseudostationary phase (PSP) in electrokinetic chromatography (EKC). The n‐octadecyl groups in SMA were the same as that in octadecylsilane (ODS) C18 column. Thus, the present work focused on the comparison of selectivity between polymeric PSP and ODS stationary phase (SP), and the effect of organic modifiers on the selectivity of polymeric PSP and ODS SP. 1‐butanol could directly interacted with PSP as a Class I modifier, and improved both of the methylene selectivity and polar group selectivity. When the analysis times were similar, the polymeric PSP exhibited better methylene selectivity and polar group selectivity. Although the hydrophobic groups were similar, the substituted benzenes elution order was different between polymeric PSP and ODS SP. Linear solvation energy relationships (LSER) model analysis found that polymeric PSP and ODS SP exhibited two same key factors in selectivity: hydrophobic interaction and hydrogen bonding acidity. But polymeric PSP exhibited relatively strong n‐ and π‐electrons interaction to the analytes.     

Monomeric and polymeric anionic gemini surfactants and mixed surfactant systems in micellar electrokinetic chromatography. Part II: characterization of chemical selectivity using two linear solvation energy relationship models

Sodium di(undecenyl) tartarate monomer (SDUT), a vesicle-forming amphiphilic compound possessing two hydrophilic carboxylate headgroups and two hydrophobic undecenyl chains, was prepared and polymerized to form a polymeric vesicle (i.e., poly-SDUT). The anionic surfactants of SDUT and poly-SDUT (carboxylate head group) and sodium dodecyl sulfate, SDS (sulfate head groups) as well as mixed surfactant systems (SDS/SDUT, SDS/poly-SDUT, and SDUT/poly-SDUT) were applied as pseudostationary phases in micellar electrokinetic chromatography (MEKC). Two linear solvation energy relationship (LSER) models, i.e., solvatochromic and solvation parameter models, were successfully applied to investigate the effect of the type and composition of pseudostationary phases on the retention mechanism and selectivity in MEKC. The solvatochromic and solvation parameter models were used to help understand the fundamental nature of the solute-pseudostationary phase interactions and to characterize the properties of the pseudostationary phases (e.g., solute size and hydrogen bond-accepting ability for all pseudostationary phases). The solute types were found to have a significant effect on the LSER system coefficients and on the predicted retention factors. Although both LSER models provide the same information, the solvation parameter model is found to provide much better results both statistically and chemically than the solvatochromic model.     

Fundamental studies on electrokinetic chromatography with PEGylated phospholipid micelles.

In this study, micelles prepared from distearoylphosphatidylethanolamine with covalently attached poly(ethylene) glycol) (PEG) of molecular weight 2000 (DSPE-PEG-2000) were employed in micellar electrokinetic chromatography (MEKC) as pseudostationary phases. Since DSPE-PEG-2000 contains long hydrophobic alkyl chains, an anionic phosphate group, and hydrophilic PEG chains, the prepared micelles are expected to provide a characteristic retention behavior for both neutral and ionic compounds. As a typical example, a baseline separation of phenol and 2-naphthol was successfully achieved by using the DSPE-PEG-2000 micelles as a background electrolyte for MEKC; such success clearly shows that the micelles can retain electrically neutral compounds. The MEKC separations of anionic and cationic compounds with a DSPE-PEG-2000 micellar solution and the enantioseparation of binaphthyl compounds with mixed micelles containing bile salt are also discussed.     

Characterisation of mixed lithium dodecyl sulphate/lithium perfluorooctanesulphonate pseudo‐stationary phases in MEKC

Lipophilicity and methylene selectivity of mixed pseudo‐stationary phases (PSPs) (containing lithium dodecyl sulphate (LDS) and lithium perfluorooctanesulphonate (LiPFOS) in different molar ratios) applied in MEKC have been investigated. Micellar proportion (t_prop,mic, a quantity expressing that how much time is spent by the analyte in the micellar phase related to its whole migration time), CLOGP₅₀ value (showing the value of hydrophobicity of a molecule spending exactly 50% of its migration time in the PSP) and methylene selectivity have been determined for different LDS/LiPFOS mixed phases. Values of the above‐mentioned parameters have been determined for analytes with different chemical structures (alkylbenzene and alkylphenone homologous series, alcohols). Good linear correlation was obtained between either the micellar proportion, CLOGP₅₀, or methylene selectivity and the phase composition for the mixed phases. Lipophilicity and methylene selectivity of the mixed LDS/LiPFOS PSPs can be calculated and can continuously be changed by mixing the two single phases (LDS and LiPFOS) in the appropriate (and calculable) portion.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.