The behavior of oxygen as a collision-induced dissociation target gas

The unusual and unique ability of O2 as target gas in kV collision-induced dissociations, to enhance a specific fragmentation of a mass selected ion, has been examined in detail. The affected dissociations studied were the loss of CH3* from CH3CH+X (X = OH, CH3, NH2, SH); CH3* and C1* loss from CH3C+(C1)CH3; C2H5* loss from CH3CH2CH+X (X = OH and NH2); H* loss from +CH2OH and +CH2NH2; O loss from 1,2-, 1,3-, and 1,4-C6H4(NO2)2+*; CH3NO+*; C6HsNO2+*; C5H5NO+* (pyridine N-oxide); 3- and 4-CH3C5H4NO+*. A general explanation of the phenomena, which was semiquantitatively tested in the present work, can be summarized as follows: the ion - O2 encounter excites the target molecules to their 3sigma(g)- state which resonantly return this energy to electronic state(s) in the ion. The excited ion now contains a sharp excess of a narrow range of internal energies, thus significantly and only enhancing fragmentations whose activation energies lie within this small energy manifold.     

Products of the gas-phase reactions of OH radicals with (C2H5O)2P(S)CH3 and (C2H5O)3PS

Products of the gas-phase reactions of OH radicals with O,O-diethyl methylphosphonothioate [(C2H5O)2P(S)CH3, DEMPT] and O,O,O-triethyl phosphorothioate [(C2H5O)3PS, TEPT] have been investigated at room temperature and atmospheric pressure of air using in situ atmospheric pressure ionization mass spectrometry (API-MS) and, for the TEPT reaction, gas chromatography and in situ Fourier transform infrared (FT-IR) spectroscopy. Combined with products quantified previously by gas chromatography, the products observed were: from the DEMPT reaction, (C2H5O)2P(O)CH3 (21+/-4% yield) and C2H5OP(S)(CH3)OH or C2H5OP(O)(CH3)SH (presumed to be C2H5OP(O)(CH3)SH by analogy with the TEPT reaction); and from the TEPT reaction, (C2H5O)3PO (54-62% yield), SO2 (67+/-10% yield), CH3CHO (22-40% yield) and, tentatively, (C2H5O)2P(O)SH. The FT-IR analyses showed that the formation yields of HCHO, CO, CO2, peroxyacetyl nitrate [CH3C(O)OONO2], organic nitrates, and acetates from the TEPT reaction were <5%, 3+/-1%, <7%, <2%, 5+/-3%, and 3+/-2%, respectively. Possible reaction mechanisms are discussed.     

The unexpected desulfurization of 4-aminothiophenols

Thermolysis of 4-aminophenyl benzyl sulfide at 523 K in the hydrogen donor solvent (HDS), 9,10-dihydroanthracene (AnH2), gave 4-aminothiophenol and toluene as the predominant products of the homolytic S-C bond cleavage. Under these conditions, a portion of the 4-aminothiophenol was desulfurized to aniline with first-order kinetics and with a rate constant estimated by kinetic modeling to be 7.0x10(-6) s-1. Starting with 4-NH2C6H4SH at 523 K, it was found that sulfur loss was more efficient in the non-HDSs, anthracene and hexadecane, than in AnH2. Under similar (competitive) reaction conditions, YC6H4SHs with Y=H, 4-CN, and 3-CF3 were completely inert; with Y=4-CH3O, there was some very minor desulfurization, whereas with Y=4-N(CH3)2 and 4-N(CH3)(H), the sulfur extrusions were as fast as that for Y=4-NH2. We tentatively suggest that this apparently novel reaction is a chain process initiated by the bimolecular formation of diatomic sulfur, S2, followed by a reversible addition of ground state, triplet 3S2 to the thiol sulfur atom, 4-NH2C6H4S upward arrow(SS upward arrow)H, and insertion into the S-H bond, 4-NH2C6H4SSSH. In a cascade of reactions, aniline and S8 are formed with the chains being terminated by reaction of 4-NH2C6H4S upward arrow(SS upward arrow)H with 4-NH2C6H4SH. Such a reaction mechanism is consistent with the first-order kinetics. That this reaction is primarily observed with 4-YC6H4SH having Y=N(CH3)2, N(CH3)(H), and NH2 is attributed to the fact that these compounds can exist as zwitterions.     

Reactions of CH3OCH2+ with hydrocarbons and O,N, and S compounds: applications for chemical ionization in selected ion flow tube studies

We report the results of a flowing afterglow ion source-selected ion flow tube study (FA-SIFT) of the reactions of the methoxymethyl cation, CH3OCH2+. Rate coefficients and product branching ratios are reported for twenty nine reagent molecules including those that constitute the major ingredients of air, the hydrocarbons CH4, C2H6, C3H8, n-C4H10, C2H2, C2H4, C3H4 (allene and propyne), C6H6, and the S-containing molecules H2S, CH3SH, C2H5SH, (CH3)2SH, and (C2H5)2SH. In addition, we examined the reactions with the N-containing molecules NH3, CH3NH2, (CH3)2NH, (CH3)3N, pyrrole, pyridine as well as CH3COCH3. The results can be summarized under three general reaction types: Reaction at the CH3 carbon, reaction at the CH2 carbon, and association. The results also indicate that the methoxymethyl cation can be used as a chemical ionization source for the detection of trace levels of S-containing compounds in saturated hydrocarbons.     

Synthesis, characterization and ethylene reactivity of 2-diphenylphosphanylbenzamido nickel complexes

Addition of primary amines to N-[2-(diphenylphosphanyl)benzoyloxy]succinimide affords 2-diphenylphosphanylbenzamides, Ph2PC6H4C(O)NHR (R = C(CH3)3, 3; R = H, 4; R = CH2CH2CH3, 5; R = CH(CH3)2, 6). Addition of NiCl(eta3-CH2C6H5)(PMe3) to the deprotonated potassium salts of the amides and subsequent treatment of two equivalents of B(C6F5)3 to the resulting products furnishes eta3-benzyl zwitterionic nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta3-CH2C6H5) (R = C6H5, 9; R = C(CH3)3, 10; R = H, 11; R = CH2CH2CH3, 12; R = CH(CH3)2, 13). Solid structures of 9, 11, 13 and the intermediate eta1-benzyl nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta1-CH2C6H5)(PMe3) (R = C6H5, 7; R = C(CH3)3, 8) were determined by X-ray crystallography. When ethylene is added to the eta3-benzyl zwitterionic nickel(II) complexes, butene is obtained by the complexes 9-12 but complex 13 provides very high molecular-weight branched polyethylene (Mw, approximately 1300000) with excellent activity (up to 5200 kg mol-1 h-1 at 100 psi gauge).     

Reactions of hydrated electron with various radicals: spin factor in diffusion-controlled reactions

The reactions of hydrated electron (eaq-) with various radicals have been studied in pulse radiolysis experiments. These radicals are hydroxyl radical (*OH), sulfite radical anion (*SO3-), carbonate radical anion (CO3*-), carbon dioxide radical anion (*CO2-), azidyl radical (*N3), dibromine radical anion (Br2*-), diiodine radical anion (I2*-), 2-hydroxy-2-propyl radical (*C(CH3)2OH), 2-hydroxy-2-methyl-1-propyl radical ((*CH2)(CH3)2COH), hydroxycyclohexadienyl radical (*C6H6OH), phenoxyl radical (C6H5O*), p-methylphenoxyl radical (p-(H3C)C6H4O*), p-benzosemiquinone radical anion (p-OC6H4O*-), and phenylthiyl radical (C6H5S*). The kinetics of eaq- was followed in the presence of the counter radicals in transient optical absorption measurements. The rate constants of the eaq- reactions with radicals have been determined over a temperature range of 5-75 degrees C from the kinetic analysis of systems of multiple second-order reactions. The observed high rate constants for all the eaq- + radical reactions have been analyzed with the Smoluchowski equation. This analysis suggests that many of the eaq- + radical reactions are diffusion-controlled with a spin factor of 1/4, while other reactions with *OH, *N3, Br2*-, I2*-, and C6H5S* have spin factors significantly larger than 1/4. Spin dynamics for the eaq-/radical pairs is discussed to explain the different spin factors. The reactions with *OH, *N3, Br2*-, and I2*- have also been found to have apparent activation energies less than that for diffusion control, and it is suggested that the spin factors for these reactions decrease with increasing temperature. Such a decrease in spin factor may reflect a changing competition between spin relaxation/conversion and diffusive escape from the radical pairs.     

Gas-phase acidities and O-H bond dissociation enthalpies of phenol, 3-methylphenol, 2,4,6-trimethylphenol, and ethanoic acid

Energy-resolved, competitive threshold collision-induced dissociation (TCID) methods are used to measure the gas-phase acidities of phenol, 3-methylphenol, 2,4,6-trimethylphenol, and ethanoic acid relative to hydrogen cyanide, hydrogen sulfide, and the hydroperoxyl radical using guided ion beam tandem mass spectrometry. The gas-phase acidities of Delta(acid)H298(C6H5OH) = 1456 +/- 4 kJ/mol, Delta(acid)H298(3-CH3C6H4OH) = 1457 +/- 5 kJ/mol, Delta(acid)H298(2,4,6-(CH3)3C6H2OH) = 1456 +/- 4 kJ/mol, and Delta(acid)H298(CH3COOH) = 1457 +/- 6 kJ/mol are determined. The O-H bond dissociation enthalpy of D298(C6H5O-H) = 361 +/- 4 kJ/mol is derived using the previously published experimental electron affinity for C6H5O, and thermochemical values for the other species are reported. A comparison of the new TCID values with both experimental and theoretical values from the literature is presented.     

Influence of the boron atom on the solvatochromic properties of 4-nitroaniline-functionalized boronate esters

Para-nitroaniline derivatives with peripheral 1,2- and 1,3-diol functionalities [O(2)N-C(6)H(4)-NR(1)-CH(2)CH(OH)CH(2)OH; O(2)N-C(6)H(4)-NR(1)-CH(CH(2)OH)(2); R(1) = -H, -CH(3)] covalently bonded to the amino group are esterified with various para-substituted phenylboronic acids [R(2)-C(6)H(4)-B(OH)(2); R(2) = -OCH(3), -CH(3), -H, -Br, -CHO, -NO(2), -B(OH)(2)], and the solvatochromic properties of these esters are investigated in 33 solvents of different polarity. To interpret the solvent effects, the established linear solvation energy (LSE) multiparameter equations of Kamlet-Taft and the improved Catalán scales are used. Although the boron atom is separated by two or three sp(3)-hybridized carbon atoms from the actual chromophore, solvation effects have a significant positive solvatochromic effect on the nitroaniline unit (R(1) = -CH(3)) as result of the solvent acting as a donor at the boron atom. The influence of the substituent R(2) on the coefficient b of the LSE relationship according to Kamlet-Taft and Catalán, which reflects the quantitative influence of the hydrogen-bonding acceptor or the electron-pair donor capacity of the solvent on the position of the UV-vis absorption maximum, can be determined via a linear Hammett relationship [b = f(σ(p))]. The interpretation of the effects is based on the electronic influence of the solvated boronic acid ester unit on the 4-nitroaniline group, predominantly through inductive interactions.     

Protonation of a lanthanum phosphide-alkyl occurs at the P-La not the C-La bond: isolation of a cationic lanthanum alkyl complex

Protonation of the heteroleptic, cyclometalated lanthanum phosphide complex [((Me3Si)2CH)(C6H4-2-CH2NMe2)P]La(THF)[P(C6H4-2-CH2NMe2)(CH(SiMe3)(SiMe2CH2))] with [Et3NH][BPh4] yields the cationic alkyllanthanum complex [(THF)4La[P(C6H4-2-CH2NMe2)(CH(SiMe3)(SiMe2CH2))]][BPh4].     

Structural diversity of the oxovanadium organodiphosphonate system: a platform for the design of void channels

The hydrothermal reactions of a vanadium source, an appropriate diphosphonate ligand, and water in the presence of HF provide a series of compounds with neutral V-P-O networks as the recurring structural motif. When the {O3P(CH2)(n)PO3}4- diphosphonate tether length n is 2-5, metal-oxide hybrids of type 1, [V2O2(H2O){O3P(CH2)(n)PO3}] x xH2O, are isolated. The type 1 oxides exhibit the prototypical three-dimensional (3-D) "pillared" layer architecture. When n is increased to 6-8, the two-dimensional (2-D) "pillared" slab structure of the type 2 oxides [V2O2(H2O)4{O3P(CH2)6PO3}] is encountered. Further lengthening of the spacer to n = 9 provides another 3-D structure, type 3, constructed from the condensation of pillared slabs to give V-P-O double layers as the network substructure. When organic cations are introduced to provide charge balance for anionic V-P-O networks, oxides of types 4-7 are observed. For spacer length n = 3, a range of organodiammonium cations are accommodated by the same 3-D "pillared" layer oxovanadium diphosphonate framework in the type 4 materials [H3N(CH2)(n)NH3][V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [n = 2, x = 6 (4a); n = 3, x = 3 (4b); n = 4, x = 2 (4c); n = 5, x = 1 (4d); n = 6, x = 0.5 (4e); n = 7, x = 0 (4f)] and [H3NR]y[V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [R = -CH2(NH3)CH2CH3, y = 1, x = 0 (4g); R = -CH3, n = 2, x = 3 (4h); R = -CH2CH3, y = 2, x = 1 (4i); R = -CH2CH2CH3, y = 2, x = 0 (4j); cation = [H2N(CH2CH3)2], y = 2, x = 0 (4k)]. These oxides exhibit two distinct interlamellar domains, one occupied by the cations and the second by water of crystallization. Furthermore, as the length of the cation increases, the organodiammonium component spills over into the hydrophilic domain to displace the water of crystallization. When the diphosphonate tether length is increased to n = 5, structure type 5, [H3N(CH2)2NH3][V4O4(OH)2(H2O){O3P(CH2)5PO3}2] x H2O, is obtained. This oxide possesses a 2-D "pillared" network or slab structure, similar in gross profile to that of type 2 oxides and with the cations occupying the interlamellar domain. In contrast, shortening the diphosphonate tether length to n = 2 results in the 3-D oxovanadium organophosphonate structure of the type 7 oxide [H3N(CH2)5NH3][V3O3{O3P(CH2)2PO3}2]. The ethylenediphosphonate ligand does not pillar V-P-O networks in this instance but rather chelates to a vanadium center in the construction of complex polyhedral connectivity of 7. Substitution of piperazinium cations for the simple alkyl chains of types 4, 5, and 7 provides the 2-D pillared layer structure of the type 6 oxides, [H2N(CH2CH2)NH2][V2O2{O3P(CH)(n)PO3H}2] [n = 2 (6a); n = 4 (6b); n = 6 (6c)]. The structural diversity of the system is reflected in the magnetic properties and thermal behavior of the oxides, which are also discussed.     

Oxygen Abstraction Reactions of N-Substituted Hydroxamic Acids with Molybdenum(V) and Vanadium(III) and -(IV) Compounds

A wide range of N-substituted mono- and dihydroxamic acids undergo oxygen abstraction on reaction with V(III), V(IV), and Mo(V) compounds to form hydroxamates of V(V) and Mo(VI) respectively together with the corresponding amides and diamides. The molybdenyl and vanadyl hydroxamates form metal-oxygen clusters under FABMS conditions. The X-ray crystal structures of [MoO(2){CH(3)(CH(2))(n)()C(O)N(C(6)H(5))O}(2) (1 and 2) (n = 4, 5) show monomeric structures with structural trans effects and consequent weakening of the Mo-O(ligand) bonds which may account for the tendency to form clusters in FABMS. In constrast, the electrospray MS of the vanadyl dihydroxamates, VO(OH)[PhN(O)C(O)(CH(2))(n)()C(O)N(O)Ph] (n = 3, 5) and VO(OH)[p-CH(3)C(6)H(4)N(O)C(O) (CH(2))(n)()C(O)N(O)C(6)H(4)-CH(3)) (n = 2, 4) show the presence of dimers in solution.     

Atmospheric chemistry of two biodiesel model compounds: methyl propionate and ethyl acetate

The atmospheric chemistry of two C(4)H(8)O(2) isomers (methyl propionate and ethyl acetate) was investigated. With relative rate techniques in 980 mbar of air at 293 K the following rate constants were determined: k(C(2)H(5)C(O)OCH(3) + Cl) = (1.57 ± 0.23) × 10(-11), k(C(2)H(5)C(O)OCH(3) + OH) = (9.25 ± 1.27) × 10(-13), k(CH(3)C(O)OC(2)H(5) + Cl) = (1.76 ± 0.22) × 10(-11), and k(CH(3)C(O)OC(2)H(5) + OH) = (1.54 ± 0.22) × 10(-12) cm(3) molecule(-1) s(-1). The chlorine atom initiated oxidation of methyl propionate in 930 mbar of N(2)/O(2) diluent (with, and without, NO(x)) gave methyl pyruvate, propionic acid, acetaldehyde, formic acid, and formaldehyde as products. In experiments conducted in N(2) diluent the formation of CH(3)CHClC(O)OCH(3) and CH(3)CCl(2)C(O)OCH(3) was observed. From the observed product yields we conclude that the branching ratios for reaction of chlorine atoms with the CH(3)-, -CH(2)-, and -OCH(3) groups are <49 ± 9%, 42 ± 7%, and >9 ± 2%, respectively. The chlorine atom initiated oxidation of ethyl acetate in N(2)/O(2) diluent gave acetic acid, acetic acid anhydride, acetic formic anhydride, formaldehyde, and, in the presence of NO(x), PAN. From the yield of these products we conclude that at least 41 ± 6% of the reaction of chlorine atoms with ethyl acetate occurs at the -CH(2)- group. The rate constants and branching ratios for reactions of OH radicals with methyl propionate and ethyl acetate were investigated theoretically using transition state theory. The stationary points along the oxidation pathways were optimized at the CCSD(T)/cc-pVTZ//BHandHLYP/aug-cc-pVTZ level of theory. The reaction of OH radicals with ethyl acetate was computed to occur essentially exclusively (～99%) at the -CH(2)- group. In contrast, both methyl groups and the -CH(2)- group contribute appreciably in the reaction of OH with methyl propionate. Decomposition via the α-ester rearrangement (to give C(2)H(5)C(O)OH and a HCO radical) and reaction with O(2) (to give CH(3)CH(2)C(O)OC(O)H) are competing atmospheric fates of the alkoxy radical CH(3)CH(2)C(O)OCH(2)O. Chemical activation of CH(3)CH(2)C(O)OCH(2)O radicals formed in the reaction of the corresponding peroxy radical with NO favors the α-ester rearrangement.     

Framework fluxionality of organometallic oxides: synthesis, crystal structure, EXAFS, and DFT studies on [[Ru(eta6-arene)]4Mo4O16] complexes

Reactions of the molybdates Na(2)MoO4.2 H2O and (nBu(4)N)2[Mo2O7] with [[Ru(arene)Cl(2)](2)] (arene=C(6)H5CH3, 1,3,5-C6H3(CH3)(3), 1,2,4,5-C6H2(CH3)4) in water or organic solvents led to formation of the triple-cubane organometallic oxides [[Ru(eta(6)-arene)](4)Mo4O16], whose crystal and molecular structures were determined. Refluxing triple cubane [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] in methanol caused partial isomerization to the windmill form. The two isomers of [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] were characterized by Raman and Mo K-edge X-ray absorption spectroscopy (XAS), both in the solid-state and in solution. This triple-cubane isomer was also used as a spectroscopic model to account for isomerization of the p-cymene windmill [[Ru(eta(6)-1,4-CH3C6H4CH(CH3)2)](4)Mo4O16] in solution. Using both Raman and XAS techniques, we were then able to determine the ratio between the windmill and triple-cubane isomers in dichloromethane and in chloroform. Density functional calculations on [[Ru(eta(6)-arene)](4)Mo4O16] (arene=C6H6, C6H5CH3, 1,3,5-C6H3(CH3)3, 1,4-CH3C6H4CH(CH3)2, C6(CH3)6) suggest that the windmill form is intrinsically more stable, provided the complexes are assumed to be isolated. Intramolecular electrostatic interactions and steric bulk induced by substituted arenes were found to modulate but not to reverse the energy difference between the isomers. The stability of the triple-cubane isomers should therefore be accounted for by effects of the surroundings that induce a shift in the energy balance between both forms.     

Syntheses, X-ray crystal structures, and optical, fluorescence, and nonlinear optical characterizations of diphenylphosphino-substituted bithiophenes

A series of bithiophene derivatives that are either symmetrically disubstituted with two Ph(2)(X)P groups (X = O, S, Se) or monosubstituted with one Ph(2)(X)P group (X = O, S, Se) and an organic functional group (H, CHO, CH(2)OH, CO(2)Me) have been synthesized. The X-ray crystal structures of Ph(2)(Se)P(C(4)H(2)S)(2)P(Se)Ph(2), Ph(2)(O)P(C(4)H(2)S)(2)H, Ph(2)(S)P(C(4)H(2)S)(2)H, and Ph(2)(O)P(C(4)H(2)S)(2)CH(2)OH exhibit very different solid-state structures depending on the type of intermolecular π-π interactions that occur. The compounds have been characterized by electronic absorption and fluorescence studies. Of particular interest is that the quantum yields of Ph(2)(O)P(C(4)H(2)S)(2)H, Ph(2)(O)P(C(4)H(2)S)(2)P(O)Ph(2), Ph(2)(O)P(C(4)H(2)S)(2)CO(2)Me, and Ph(2)(O)P(C(4)H(2)S)(2)CH(2)OH are significantly larger than that of bithiophene (factors of 13, 14, 14, and 22, respectively). This behavior is quite different from that of analogously substituted terthiophenes in which substitution results in only modest increases in the quantum yields over that of terthiophene (factors of 0.94, 2.7, 1.3, and 1.5, respectively). DFT studies of the emission process suggest that modifying the Ph(2)(X)P group affects both the fluorescence and nonradiative rate constants while modifications of the organic substituents primarily affect the nonradiative rate constants. The higher quantum yields of the substituted bithiophenes make them promising for application in organic light-emitting devices (OLED). The optical power limiting (OPL) performances of these Ph(2)(X)P-substituted bithiophenes were evaluated by nonlinear transmission measurements in the violet-blue spectral region (430-480 nm) with picosecond laser pulses. The OPL performances are enhanced by heavier X groups and when by higher solubilities. Saturated chloroform solutions of Ph(2)(O)P(C(4)H(2)S)(2)H and Ph(2)(S)P(C(4)H(2)S)(2)H exhibit significantly stronger nonlinear absorption than any previously reported compounds and are promising candidates for use in broadband optical power limiters.     

光促进温和条件下烯烃与二氧化碳的羰基化反应

羰基化反应是有机合成化学中常用的方法之一,但常规的羰基化反应大多要求高温(150～200℃)、高压(10～20 M Pa)或使用贵金属催化剂(如钌、铑、铱等),并且C₁源多用一氧化碳^[1].开发和利用CO₂这一丰富的C₁资源,并最大限度地降低其排放量具有挑战意义.但CO₂活化比较困难,在通常条件下难以转化成其它化学品^[2].在光促进下的羰基化反应可克服上述困难,使反应在温和条件及非贵金属催化下完成,同时可用CO₂代替CO作为C₁源,因此这是一个对环境友好的工艺^[3].本文报道烯烃在光促进常温常压和非贵金属钴配合物催化下与二氧化碳的羰基化反应,同时通过¹³CO₂和¹³CH₃OH同位素实验,对反应产物的结构进行了分析.     

Chelating versus bridging bonding modes of N-substituted bis(diphenylphosphanyl)amine ligands in Pt complexes and Co2Pt clusters

N-substituted dppa ligands Ph2P-NR-PPh2 [R = -CH2CH2SCH2C6H5 (1), -CH2CH2S(CH2)5CH3 (2), -(CH2)9CH3 (3), -C6H5 (4)] were used for the synthesis of cis-[PtCl2{Ph2PN(R)PPh2}] complexes [R = -CH2CH2SCH2C6H5 (5), -CH2CH2S(CH2)5CH3 (6), -(CH2)9CH3 (7), -C6H5 (8)] and heterotrinuclear clusters of formula [PtCo2(CO)7{Ph2PN(R)PPh2}] [R = -CH2CH2SCH2C6H5 (9), -CH2CH2S(CH2)5CH3 (10), -(CH2)9CH3 (11), -C6H5 (12)]. The presence of relatively bulky substituents on N resulted in a higher chelating power of the ligands. The thermodynamic study of the equilibrium between the chelate and the bridged forms of clusters 9-11 showed that the bridged form is favoured by enthalpic factors whereas entropic factors favour chelation. The structures of 5 and 9 were determined by single crystal X-ray diffraction.     

Structural and solvent effects on the C-S bond cleavage in aryl triphenylmethyl sulfide radical cations

Steady-state and laser flash photolysis (LFP) studies of a series of aryl triphenylmethyl sulfides [1, 3,4-(CH(3)O)(2)-C(6)H(3)SC(C(6)H(5))(3); 2, 4-CH(3)O-C(6)H(4)SC(C(6)H(5))(3); 3, 4-CH(3)-C(6)H(4)SC(C(6)H(5))(3); 4, C(6)H(5)SC(C(6)H(5))(3); and 5, 4-Br-C(6)H(4)SC(C(6)H(5))(3)] has been carried out in the presence of N-methoxyphenanthridinium hexafluorophosphate in CH(3)CN, CH(2)Cl(2), CH(2)Cl(2)/CH(3)CN, and CH(2)Cl(2)/CH(3)OH mixtures. Products deriving from the C-S bond cleavage in the radical cations 1(?+)-5(?+) have been observed in the steady-state photolysis experiments. Time-resolved LFP showed first-order decay of the radical cations accompanied by formation of the triphenylmethyl cation. A significant decrease of the C-S bond cleavage rate constants was observed by increasing the electron-donating power of the arylsulfenyl substituent, that is, by increasing the stability of the radical cations. DFT calculations showed that, in 2(?+) and 3(?+), charge and spin densities are mainly localized in the ArS group. In the TS of the C-S bond cleavage an increase of the positive charge in the trityl moiety and of the spin density on the ArS group is observed. The higher delocalization of the charge in the TS as compared to the initial state is probably at the origin of the observation that the C-S bond cleavage rates decrease by increasing the polarity of the solvent.     

Atmospheric chemistry of perfluorinated aldehyde hydrates (n-C(x)F(2x+1)CH(OH)2, x = 1, 3, 4): hydration, dehydration, and kinetics and mechanism of Cl atom and OH radical initiated oxidation

Smog chamber/Fourier transform infrared (FTIR) techniques were used to measure k(Cl+C(x)F(2x+1)CH(OH)(2)) (x = 1, 3, 4) = (5.84 +/- 0.92) x 10(-13) and k(OH+C(x)F(2x+1)CH(OH)(2)) = (1.22 +/- 0.26) x 10(-13) cm(3) molecule(-1) s(-1) in 700 Torr of N(2) or air at 296 +/- 2 K. The Cl initiated oxidation of CF(3)CH(OH)(2) in 700 Torr of air gave CF(3)COOH in a molar yield of 101 +/- 6%. IR spectra of C(x)F(2x+1)CH(OH)(2) (x = 1, 3, 4) were recorded and are presented. An upper limit of k(CF(3)CHO+H(2)O) < 2 x 10(-23) cm(3) molecule(-1) s(-1) was established for the gas-phase hydration of CF(3)CHO. Bubbling CF(3)CHO/air mixtures through liquid water led to >80% conversion of CF(3)CHO into the hydrate within the approximately 2 s taken for passage through the bubbler. These results suggest that OH radical initiated oxidation of C(x)F(2x+1)CH(OH)(2) hydrates could be a significant source of perfluorinated carboxylic acids in the environment.     

Cis-Trans Isomerization and Oxidation of Radical Cations of Stilbene Derivatives

Isomerization from cis stilbene derivatives (c-S (S = RCH=CHC(6)H(5): 1, R = C(6)H(5); 2, R = 4-CH(3)C(6)H(4); 3, R = 4-CH(3)OC(6)H(4) (= An); 4, R = 2,4-(CH(3)O)(2)C(6)H(3); 5, R = 3,4-(CH(3)O)(2)C(6)H(3); 6, R = 3,5-(CH(3)O)(2)C(6)H(3); 7, AnCH=C(CH(3))C(6)H(5); 8, AnCH=CHAn)) to trans isomers (t-S) and oxidation of S with O(2) were studied in gamma-ray radiolyses of c-S in Ar-saturated 1,2-dichloroethane (DCE) and of S in O(2)-saturated DCE, respectively. On the basis of product analyses, it is suggested that a smaller barrier to c-t unimolecular isomerization for c-3(*+)-5(*+) and 8(*+) than for c-1(*+), 2(*+), and 6(*+) due to the single bond character of the central C=C double bond for c-3(*+)-5(*+) and 8(*+) with a p-methoxyl group but not for c-1(*+), 2(*+), and 6(*+) without a p-methoxyl group because of the contribution of a quinoid-type structure induced by charge-spin separation. The isomerization proceeds via chain reaction mechanisms involving c-t unimolecular isomerization and endergonic hole transfer or dimerization and decomposition. The isomerization of c-3(*+) to t-3(*+) is catalyzed by addition of 1,4-dimethoxybenzene but terminated by triethylamine. The regioselective formation of 3d in oxidation of 3(*+) with O(2) is explained by spin localization on the beta-olefinic carbon in 3(*+). The results of product analyses are compared with the rate constants of the unimolecular isomerization and the oxidation for S(*+) measured with pulse radiolyses.     

Thermal decomposition mechanisms of the methoxyphenols: formation of phenol, cyclopentadienone, vinylacetylene, and acetylene

The pyrolyses of the guaiacols or methoxyphenols (o-, m-, and p-HOC(6)H(4)OCH(3)) have been studied using a heated SiC microtubular (μ-tubular) reactor. The decomposition products are detected by both photoionization time-of-flight mass spectroscopy (PIMS) and matrix isolation infrared spectroscopy (IR). Gas exiting the heated SiC μ-tubular reactor is subject to a free expansion after a residence time of approximately 50-100 μs. The PIMS reveals that, for all three guaiacols, the initial decomposition step is loss of methyl radical: HOC(6)H(4)OCH(3) → HOC(6)H(4)O + CH(3). Decarbonylation of the HOC(6)H(4)O radical produces the hydroxycyclopentadienyl radical, C(5)H(4)OH. As the temperature of the μ-tubular reactor is raised to 1275 K, the C(5)H(4)OH radical loses a H atom to produce cyclopentadienone, C(5)H(4)═O. Loss of CO from cyclopentadienone leads to the final products, acetylene and vinylacetylene: C(5)H(4)═O → [CO + 2 HC≡CH] or [CO + HC≡C-CH═CH(2)]. The formation of C(5)H(4)═O, HCCH, and CH(2)CHCCH is confirmed with IR spectroscopy. In separate studies of the (1 + 1) resonance-enhanced multiphoton ionization (REMPI) spectra, we observe the presence of C(6)H(5)OH in the molecular beam: C(6)H(5)OH + λ(275.1?nm) → [C(6)H(5)OH ?] + λ(275.1nm) → C(6)H(5)OH(+). From the REMPI and PIMS signals and previous work on methoxybenzene, we suggest that phenol results from a radical/radical reaction: CH(3) + C(5)H(4)OH → [CH(3)-C(5)H(4)OH]* → C(6)H(5)OH + 2H.