Performance evaluation of new plasticizers for stretch PVC films

Six stretch PVC films have been formulated to have Shore A hardness of approx. 80 and nominal thickness of 15 μm with the aim of evaluating the performance of plasticizers from renewable and non-renewable sources for stretch PVC films intended to be employed as packaging. The reference film was produced with DEHA and ESBO, while the other films were produced with conventional plasticizers (ATBC and Polyadipate), new plasticizers from renewable sources (Mixture of glycerin acetates and Acetic acid esters of mono- and diglycerides of fatty acids) or a plasticizer employed in toy and childcare applications (DEHT) as a third plasticizer. The films were evaluated as to their physical and mechanical properties (durometer hardness, tensile strength and elongation), IR spectroscopy and light transmission. The several plasticizers influenced the mechanical properties of the PVC films to different degrees. All films will probably show adequate performance when used in packaging applications. Nevertheless, the vegetable oil-based plasticizers showed better mechanical performance than the other plasticizers when compared to DEHA.     

Effect of Vinyl Chloride Injection on the Morphology of Suspension-Polymerized PVC

The mechanism of growth of PVC granules was investigated by injecting additional vinyl chloride monomer into a conventional suspension polymerization process at two different conversions. Polymerization was sustained for long periods in both cases, with the injection before pressure drop producing a more rapid decrease in properties such as porosity and surface area. With injection after pressure drop, additional polymer growth produced a structure with noticeably inferior plasticizer absorption and gelation properties, even though porosity and surface area values were higher. A discussion of the growth mechanism of PVC granules under the two injection systems is presented and related to the conventional suspension process.     

The Effect of Hydrotalcite and Zinc Oxide on Smoke Suppression of Commercial Rigid PVC

To reduce the smoke release of poly(vinyl chloride) (PVC) during burning, layered double hydroxides (LDHs) and zinc oxide (ZnO) powders were used to modify the polymer. The results indicated that the addition of LDHs‐ZnO had a significant effect on smoke suppression. The limiting oxygen index (LOI) reached a maximum value and the smoke density rank (SDR) exhibited a minimum value when the weight percentages of LDHs and ZnO in PVC were 3% and 2%, respectively. Thermal stabilities of the modified PVC and degradation products were investigated by means of thermogravimetry and pyrolysis‐gas chromatography‐mass spectra (Py‐GC‐MS). The LDHs‐ZnO obviously accelerated the decomposition of PVC to release hydrogen chloride, and the decomposed PVC consequently produced the trans‐conjugated polyene sequences, which easily formed crosslinked structures. However, a cyclization reaction in PVC chain without the additives produced aromatic compounds such as benzene, toluene, and naphthalene at 350°C. Even though, an amount of aromatic compounds was released from the PVC modified with LDHs‐ZnO at the temperature of 600°C, the content of the decomposed products is relatively lower compared to unmodified PVC.     

Sulfate-selective PVC membrane electrode based on a strontium Schiff's base complex

A strontium Schiff's base complex (SS) can be used as a suitable ionophore to prepare a sulfate-selective PVC-based membrane electrode. The use of oleic acid (OA) and hexadecyltrimethylammonium bromide (HTAB), as additives, and nitrobenzen (NB), dibutyl phthalate (DBP) and benzyl acetate (BA) as solvent mediators, were investigated. The best performance was observed with a membrane composition PVC: NB: SS: HTAB of 30%: 62%: 5%: 3% ratio. The resulting sensor works well over a wide concentration range (1.0 x 10(-2)-1.0 x 10(-6) M) with a Nernstian slope of -29.2 mV per decade of sulfate activity over a pH range 4.0-7.0. The limit of detection of the electrode is 5 x 10(-7) M. The proposed sensor shows excellent discriminating ability toward SO4(2-) ions with regard to many anions. It has a fast response time of about 15 s. The membrane electrode was used to the determination of zinc in zinc sulfate tablets. The sensor was also used as an indicator electrode in the potentiometric titration of SO4(2-) against barium ion.     

盐酸依匹斯汀PVC膜电极的研制及应用

以四苯硼酸钠与盐酸依匹斯汀生成的离子缔合物为电活性物质,研制了盐酸依匹斯汀PVC膜选择性电极。在pH 5的HCl-NaOH溶液中,电极的线性范围为6.3×10-7~1.0×10-1mol/L,斜率为49 mV/pC(10℃),检出限为1.89×10-7mol/L。应用此电极测定药物中盐酸依匹斯汀含量,RSD3%,回收率为97.5%~100.2%。     

Development of plasticised PVC sensing films for the determination of BTEX compounds in aqueous samples

A novel plasticised PVC polymer membrane as a sensing film for the determination of BTEX compounds using ATR-FTIR spectroscopy is demonstrated. A range of 10 plasticised PVC phases have been investigated using toluene and tetrachloroethylene as test analytes. Both analyte enrichment rates and infrared absorbance values were considered when choosing a suitable polymer for sensing. An enhancement in analyte absorbance at the characteristic IR absorption bands was noted as the plasticiser concentration in the film was increased. 2% PVC with 75% diisooctyl azelate was found to show promising results for simultaneous determination of the BTEX compounds. All BTEX analytes can be measured in less than 8 min. A study of a multicomponent sample demonstrated that analyte enrichment times were influenced by the presence of even one additional analyte component in the sample.     

超声波辅助萃取同位素稀释质谱法测定聚氯乙烯中6种邻苯二甲酸酯

采用超声波辅助萃取同位素稀释质谱法测定聚氯乙烯中6种邻苯二甲酸酯的含量。以四氢呋喃为溶剂对样品进行超声波辅助提取后,加入甲醇对聚合物进行沉淀,取上清液,经冷冻离心后进行气相色谱一质谱分析,并采用氘代邻苯二甲酸酯为内标,单点校正法定量。该方法应用于中、日、韩计量比对的样品测定中,两天进行的6次测定结果相对标准偏差为0．7％～3．0％。最终比对结果显示3个国家的数据取得很好的一致性,除DEP相对标准偏差为2．4％以外,其它5种邻苯二甲酸酯相对标准偏差为0．7％～1．2％,测定结果的相对扩展不确定度为1．8％～4．9％,证明该方法准确、可靠。     

Influence of the morphology of samples in the pyrolysis of PVC

PVC was used as a model substance to study the dependence of thermal measurement data on the preparation and morphological characteristics of samples The PVC treated was a commercially available suspension polymer, Ongrovil S 155, produced by the Borsodi Vegyi Kombinát. The whole thermal process was followed by TG and DTG measurements in air and argon atmospheres by means of a Du Pont 990 Thermoanalyzer. Evolved-gas analysis was performed with a home-made apparatus. Pyrolysis gas chromatography was accomplished using a Hamilton type pyrolyzer and a Carlo Erba Chromatograph furnished with a flame ionization detector. The investigations showed benzene and other components to be evolved from the initial polymer and an alteration depending on the morphological characteristics of the samples. This was suggested to be due to the different mechanisms of thermal degradation of the PVC.     

Probing the effect of high energy ball milling on PVC through a multitechnique approach

The effects induced by ball milling treatment on PVC features and properties were deeply investigated through a multitechnique approach. SEM analysis showed a drastic change in PVC morphology; the hierarchical structure of PVC grains was partially destroyed as well as the domain size strongly reduced. A X-ray diffraction and DSC comparative study proved a structural modification in the PVC crystalline phase. Moreover, it was found that these morphological and structural changes strongly affected the gelation behavior, the microstructure and the mechanical parameters of PVC. In particular, the gelation time increased with increasing the ball milling time; the residual primary crystallite content doubled with respect to neat PVC and the toughness improved up to 25% as a function of the resulting microstructure.     

Ionic Diffusion Through Unblended PVC Membranes

Abstract

This work deals with the study of the diffusion of Cl^? ion through pure unblended polyvinylchloride (PVC) membranes of different thickness. Several PVC -tetrahydrofuran ratios and also different internal diameter glass disks have been used to change the thickness of the membrane. A chloride ion selective electrode also constructed in the laboratory is used as the detector. The electrode behaviour was studied by running up a calibration graph prior to membrane positioning. A mean slope of 57 ±1 mV/log.C at 28.0 ± 0.5 °C was obtained and the range of potential values were then known. The detector was very well washed and immediately a membrane was placed directly on its surface and assembled to a rotating disk electrode in order to get a diffusion cell. The receiving compartment in this system has a negligible volume. Therefore, the response of the chloride ion selective electrode is directly proportional to the flux of material through the membrane rather than to the receiving compartment concentration. An almost linear relationship between the Cl^? ion concentration in the range 0.0010 – 0.10 M and its flux through the unblended PVC membrane was found. The chloride ion flux through the PVC membrane in solutions with the ion strength adjusted to 0.1 M was twice to that value obtained without ion strength adjustor (ISA) in the solution. Average rate transport in the range 3.5?10^?7 to 9.6?10^?7 mol/s Cl^? was found at a rotation speed of 1280 rpm.     

Allylated PVC

Active chlorines in poly(vinyl chloride) (PVC) were quantitatively replaced by pendant allyl groups ( CH₂CHCH₂) with allyltrimethylsilane in the presence of Friedel–Crafts acids (e.g., Et₂AlCl and TiCl₄). The thermal stability of the allylated PVCs was significantly superior to that of the starting material. Our allylation method is essentially quantitative; indeed, it was used for the determination of the active chlorine content in the PVCs. Furthermore, the pendant allyl groups were quantitatively oxidized by m‐chloroperbenzoic acid to epoxides; thus, PVCs carrying propylene oxide substituents [ CH₂CH CH₂(O)] were prepared. The structures of the products were characterized by high‐resolution NMR spectroscopy, and their thermal characteristics were characterized by TGA and color formation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 307–312, 2001     

Construction and Application of a PVC Membrane Enoxacin Ion－selective Electrode Based on a Needle－shaped Inner Reference Electrode

IntroductionPVC membrane- coated- wire electrodes areused in the analytical field widely. They are pre-pared usually with platinum wire,silver wire orgraphite rod coated with a PVC thin membranecontaining various active components and plasticiz-ers[1— 3 ] .The electrodes have no inner KCl solutionand they are notinfluenced by the sample pressure.Furthermore,they are free from directional selec-tivity when they are installed,and they can be mi-crominiaturized easily. The shortcomings of th…     

Metal dicarboxylates as thermal stabilizers for PVC

Different metal dicarboxylates such as calcium glutarate, zinc glutarate, calcium sebacate and zinc sebacate were investigated in this paper as thermal stabilizers (without and with calcium stearate and pentaerythritol as costabilizers) of poly(vinyl chloride) (PVC). The thermal stability of the PVC films was determined by two different methods which are visual color comparison and measurement of HCl release from heated pellets. Both zinc dicarboxylates and calcium dicarboxylates exhibited good thermal stability. With respect to stabilizing performance, zinc glutarate (ZnGa) was more effective than zinc sebacate (ZnSe), particularly in the presence of a large amount of pentaerythritol. Similarly, calcium glutarate (CaGa) was more effective than calcium sebacate (CaSe). And the relative order of stabilizing effectiveness of metal dicarboxylates was as follows: CaGa > CaSe > ZnGa > ZnSe. Moreover, the Ca-Zn complex thermal stabilizer and the Pe-Zn complex thermal stabilizer were also studied. It was found that no more than 20% of the zinc compound exhibited better stabilizing performance.     

Structure of branching in PVC

A new macromolecular model for branched PVC was synthesized by copolymerization of vinyl chloride with 2,4-dichloropentene-1. The composition and the properties of this new copolymer were studied and the phenolysis reaction to determine the content of chlorine atom bound to the tertiary carbon atom (Cl_T) was carried out. The presence of a longer branch, of PVC type, does not impede the reaction. It is concluded that there are no chlorine atoms at the branching sites in PVC.     

Potentiometric PVC membrane sensor for the determination of scopolamine in some pharmaceutical formulations.

A novel PVC membrane electrode for the determination of scopolamine ion based on the formation of an ion-association complex of scopolamine with the phosphotungstate counter anion as an electroactive material dispersed in a PVC matrix is described. The sensor shows a fast, stable, near-Nenstian response for 1 x 10(-2) mol dm(-3) to 1 x 10(-6) mol dm(-3) scopolamine at 25 degrees C over the pH range of 3 - 7 with a cationic slope of 54.5 +/- 0.5 mV/decade. The lower detection limit is 8 x 10(-7) mol dm(-3) and the response time is 15 -45 s. The selectivity coefficients for scopolamine relative to the number of interfering substances were investigated. There was negligible interference from the studied cations, anions, and pharmaceutical excipients. The determination of scopolamine in aqueous solution shows an average recovery of 100.0% and a mean relative standard deviation (RSD) of 1.5% at 500 microg/cm3. The direct determination of scopolamine in some formulations (scopolamine injection and eye drops) gave results that compare favorably with those obtained by the United State of Pharmacopoeia method. Potentiometric titration of scopolamine with sodium tetraphenylborate and phosphotungstic acid as a titrant was monitored with the developed scopolamine electrode as an end point indicator electrode.     

Mechanism of smoke suppression by metal oxides in PVC

The amount of smoke suppression induced in PVC by some metal oxides was measured as a function of temperature. The amount of CO₂ evolved in the combustion was also measured simultaneously with smoke emission. Our results show that in a smoldering condition smoke occurred almost immediately, whereas CO₂ occurred at a later stage. A good correlation was found between smoke density and char yield in nitrogen, and the amount of benzene suppression, induced by metal oxides, also correlated well with the char yield. These facts are taken as evidence that crosslinking catalyzed by metal oxides is the principal mechanism of smoke inhibition and that char oxidation is responsible for the reduction of char yield.     

Modified suspension‐PVC particles as absorbents of ortho‐dichlorobenzene from water

Modified porous PVC particles are studied as absorbents of o‐dichlorobenzene (DCB), from water. The modified particles were produced by an in‐situ stabilizer‐free polymerization/crosslinking of a monomer/crosslinker/peroxide solution absorbed within commercial porous suspension‐type PVC particles. The modifying monomers used include styrene with divinyl benzene (DVB) as a crosslinking comonomer, methyl methacrylate (MMA), butyl acrylate (BA), or ethylhexyl acrylate (EHA) with ethylene glycol dimethacrylate (EGDMA) as a crosslinking comonomer. The effect of the nature of the monomers, morphology, porosity, surface area and composition of the modified PVC particles on DCB absorption was studied. Batch experiments (absorption rate and isotherms) were used to screen the PVC absorbents on the basis of absorption rate and absorption capacity. Continuous absorption column experiments were conducted to study the parameters characterizing the absorption process. Both the unmodified and modified PVC particles absorb DCB from water. The PBA and PEHA‐modified PVC particles approach equilibrium capacity faster and have greater absorption capacity than neat PVC, PS‐modified PVC and PMMA‐modified PVC particles. The absorption characteristics are influenced by the modifying polymer's T_g. The rubbery nature of PBA and PEHA yields better absorption in spite of the significantly lower surface area and porosity obtained in the modified PVC particles. Thus, indicating that fast adsorption followed by bulk absorption of DCB is taking place. A clear influence of the crosslinking effect was not established. The continuous absorption experiments were found more efficient than the batch absorption experiments. Copyright © 2003 John Wiley & Sons, Ltd.     

Gelation/fusion behavior of PVC plastisol with a cyclodextrin derivative and an anti-migration plasticizer in flexible PVC

We successfully evaluated the effects of 2,3,6-per-O-benzoyl-β-cyclodextrin (Bz-β-CD) on the rheological properties of PVC plastisols and the migration behavior of plasticizer from flexible PVC. Two types of plasticizer, di-isononyl phthalate (DINP) and diisononyl cyclohex-4-ene-1,2-dicarboxylate (Neocizer), along with Bz-β-CD as a migration inhibitor were mechanically mixed into an emulsion grade PVC resin to prepare plastisols. The presence of Bz-β-CD was expected to facilitate formation of stable complexes with DINP or Neocizer in the flexible PVC. It was necessary to determine whether changes in the processing conditions of the PVC plastisol were needed for use in this application. To this end, the viscoelastic properties of the plastisols, including the elastic modulus, G′, and the viscous modulus, G″, were continuously monitored as a function of temperature during the gelation and fusion processes using rheological analysis techniques. The results showed that complete gelation was slightly delayed and both moduli (G′ and G″) decreased upon addition of Bz-β-CD to the PVC matrix. FE-SEM images yielded insight into the gelation and fusion processes. The curing conditions and physical properties of the flexible PVCs containing Bz-β-CD were optimized, and the influence of Bz-β-CD on the migration of the plasticizers and the stability of the flexible PVC was studied. The results showed that Bz-β-CD reduced migration of DINP and Neocizer from the flexible PVC by almost 40% and 25%, respectively, thereby favorably restricting migration within the flexible PVC.     

PVC matrix membrane sensor for potentiometric determination of cetylpyridinium chloride.

A novel cetylpyridinium chloride-selective membrane sensor consisting of cetylpyridinium-ferric thiocyanate ion pairs dispersed in a PVC matrix placticized with dioctylphthalate is described. The electrode shows a stable, near-Nernstian response for 1 x 10(-3)-1 x 10(-6) mol l-1 cetylpyridinium chloride (CPC) at 25 degrees C over the pH range 1-6 with a cationic slope of 57.5 +/- 0.4. The lower detection limit is 8 x 10(-7) mol l-1 and the response time is 30-60 s. Selectivity coefficients for CPC relative to a number of interfering substances were investigated. There is negligible interference from many cations, anions and pharmaceutical excipients; however, cetyltrimethylammonim bromide (CTMAB) interfered significantly. The determination of 0.5-350 micrograms/ml of CPC in aqueous solutions shows an average recovery of 98.5% and a mean relative standard deviation of 1.6% at 56.0 micrograms/ml. The direct determination of CPC in Ezafluor mouthwash gave results that compare favorably with those obtained by the British Pharmacopoeia method. Precipitation titrations involving CPC as titrant are monitored with a CP sensor. The CP electrode has been utilized as an end point indicator electrode for the determination of anionic surfactants in some commercial detergents.     

Merrifield-like resin beads by acid catalyzed incorporation of benzyl chloride into dehydrochlorinated PVC

A method is presented for preparing Merrifield-like resin beads starting from poly (vinyl chloride) (PVC) in spherical bead form. In this method, first, PVC is partially dehydrochlorinated in boiling methanolic KOH (20%) solution to create minute amounts of allylic carbon centers. Those centers trigger the un-zipping process and make further dehydrochlorination possible at relatively low temperatures (180-200 °C), while retaining the bead shapes. Acid catalyzed reaction of the dehydrochlorinated PVC particles with benzyl chloride at 180 °C yields crosslinked spherical bead polymers possessing chloromethyl benzene functions as high as 3.4 mmol g⁻¹. Experiments showed that, high yields of benzyl chloride insertions can be attained by using PVC samples with 40-50% of unsaturations. In the study transformation yields in each step were followed by conventional analytical methods and IR spectrometry. It was also demonstrated that modification of the chloromethyl groups either with KCN or sodium acetate proceeds with nearly quantitative yields, as in the case for chloromethylated styrene-divinyl benzene resins.