树枝化对聚芴类分子发光行为的影响

运用稳态吸收、稳态荧光光谱及皮秒时间分辨荧光光谱等手段, 研究了树枝化对聚芴分子的光谱动力学行为的影响. 在1×10-5 mol/L四氢呋喃溶液中, 非树枝化聚芴和不同代数的树枝化聚芴的稳态吸收和稳态荧光光谱基本一致, 表明树枝化不影响聚芴基团的本征电子性质; 在薄膜状态下, 紧密排列的聚芴分子表现出明显的链间聚集行为. 不同代数树枝化聚芴的时间分辨荧光动力学研究结果表明, 溶液状态下的发光为单指数衰减行为, 而薄膜状态下的发光为多指数衰减行为, 且其发光寿命随树枝化代数增加而增长, 表明树枝化基团抑制了邻近的聚芴分子之间能量传递所致的激发态能量耗散.     

Synthesis of an anionically chargeable, high-molar-mass, second-generation dendronized polymer and the observation of branching by scanning force microscopy

An efficient synthesis of a methacrylate-based, second-generation (G2) dendronized macromonomer and its free radical polymerization to the corresponding high-molar-mass G2 dendronized polymer are described. The molar mass is determined by gel permeation chromatography (GPC), light-scattering, and analytical ultracentrifugation and compared with values estimated from a scanning force microscopy (SFM) contour lengths analysis of individualized polymer strands on mica. The polymer carries terminal tert-butyl-protected carboxyl groups, the degree of deprotection of which with trifluoroacetic acid is quantified by NMR spectroscopy using the highest molar mass sample. SFM imaging of both protected (noncharged) and unprotected (charged) dendronized polymers on solid substrates reveals mostly linear chains but also some with main-chain branches. The nature of these branches is investigated and the degree roughly estimated to which they are formed. Finally, a synthetic model experiment is described which sheds some light on the aspect of whether chain transfer, a process that could lead to covalent branching, is of importance in the synthesis of the present dendronized polymers.     

Load–Collapse–Release Cascades of Amphiphilic Guest Molecules in Charged Dendronized Polymers through Spatial Separation of Noncovalent Forces

The ability to pack guest molecules into charged dendronized polymers (denpols) and the possibility to release these guest molecules from subsequently densely aggregated denpols in a load–collapse–release cascade is described. Charged denpols, which constitute molecular objects with a persistent, well‐defined envelope and interior, are capable of incorporating large amounts of amphiphilic guest molecules. Simultaneously, multivalent ions can coordinate to the surfaces of charged denpols, leading to counterion‐induced aggregation of the already guest‐loaded host structures. Thus, although the local guest concentration in denpol‐based molecular transport might already be initially high due to the dense guest packing inside the dendritic denpol scaffolding, the “local” guest concentration can nonetheless be further increased by packing (through aggregation) of the host–guest complexes themselves. Subsequent release of guest compounds from densely aggregated dendronized polymers is then possible (e.g., through increasing the solution concentration of imidazolium‐based ions). Augmented with this release possibility, the concept of twofold packing of guests, firstly through hosting itself and secondly through aggregation of the hosts, gives rise to a load–collapse–release cascade that strikingly displays the high potential of dendronized macromolecules for future molecular transport applications.     

Immobilization of peroxidase on SiO2 surfaces with the help of a dendronized polymer and the avidin-biotin system

Horseradish peroxidase (HRP) is immobilized in three easy steps on SiO(2) surfaces with the help of a polycationic second generation dendronized polymer (denpol) and the biotin-avidin system. This stepwise immobilization process is monitored and quantitatively analyzed with the transmission interferometric adsorption sensor. Partially biotinylated denpol is first adsorbed onto SiO(2) , followed by addition of avidin and then of biotinylated HRP. Denpols in their molecular structure combine properties of polymers as well as dendrimers which are found to be of clear advantage for this type of non-covalent enzyme immobilization. With respect to the reproducibility of the adsorption process and with respect to the stability of the adsorbed polymer layer, the denpol is superior to α-poly-D-lysine which is used as a reference polymer. Furthermore, HRP immobilized with the denpol on commercial glass slides remains considerably more active upon storage as compared to HRP immobilized with the help of α-poly-D-lysine with a similar number of repeating units. The ease of the denpol-mediated HRP immobilization and the high stability of the immobilized enzyme are promising for bioanalytical applications.     

Supramolecular Copolymerization by Sequence Reorganization of a Supramolecular Homopolymer

The homopolymeric sequence formed by the head‐to‐head association of tetrakisporphyrin 1 is completely dissociated by the competitive association of the ditopic guest G2 , resulting in the supramolecular copolymer poly‐ 1 ? G2 with an alternatingly repeating host–guest sequence. The 1:1 stoichiometry of 1 and G2 is confirmed by a Job plot using UV/Vis titration and diffusion‐ordered NMR spectroscopy (DOSY). The solution viscometry for poly‐ 1 and poly‐ 1 ? G2 suggests that the supramolecular chain of poly‐ 1 behaves like a rod, whereas the supramolecular copolymer chain of poly‐ 1 ? G2 behaves like a swelled fat chain, which is entangled in the semi‐dilute regime. Atomic force microscopy shows that the supramolecular polymer poly‐ 1 ? G2 is highly oriented through the interdigitation of the long alkyl chains.     

Synthesis and encapsulation properties of dendronized polymer with Fréchet‐type dendrons peripherally decorated by carboxylic acid functionalization

A new carboxylic acid‐terminated dendronized polymer (denpol), constructed with linear chain attaching Fréchet‐type dendrons at each repeat unit, has been designed and synthesized through a combination of macromonomer route and hydrolysis reaction. The resulting denpol exhibits excellent solubility in aqueous solution for pH ≥ 6, and significantly the denpol also encapsulates various aromatic molecules efficiently. The results of UV–vis and fluorescence spectra indicate that hydrophobic and π‐π interactions bring into effect between the water‐insoluble organic molecules and the denpol. Moreover, the photoisomerization of azobenzene solubilized in denpol aqueous solution was investigated, which indicated that trans‐to‐cis and cis‐to‐trans conversions were first‐order reactions. The enhancement of photoisomerization property may attribute to the proper microenvironment in the denpol. Therefore, the denpol is expected to be a potential candidate as amphiphilic unimolecular container. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4564–4574, 2008     

Double-helical ultrastructure of polycationic dendronized polymers determined by single-particle Cryo-TEM

The ultrastructure of cationic dendronized polymers (denpols) of third and fourth generations (PG3 and PG4) in water was determined by using single-particle cryo-transmission electron microscopy (cryo-TEM). At concentrations in the region of 50 mg L(-1), networks of double-stranded fibers were revealed that exhibit well-defined diameters of 5.9 nm+/-0.4 nm for PG3 and 7.4 nm+/-0.4 nm for PG4. The structure varies with progression along the fibers, and includes a double helix with a pitch of 7.0+/-0.4 nm for PG3 and 9.0+/-0.4 nm for PG4. The formation of the double strands is attributed to the hydrophobic effect and limited crowding in the dendron shell of the third and fourth generation denpols investigated. From solutions of lower concentrations (around 10 mg L(-1)), isolated molecular fibers were adsorbed onto high-energy surfaces and examined by performing scanning force microscopy (SFM) on mica, and after staining, TEM on glow-discharged carbon films. In both cases, characteristic undulations of single strands were observed, which are attributed largely to the adsorption process.     

Synthesis and Properties of Dendronized Chitosan

Summary: Chitosan films and microspheres were prepared and their surfaces were functionalized with first generation dendritic molecules. The films were modified by Weisocyanate dendron, while Behera's and bis Behera's amine dendrons were used to modify the microspheres. Prior to dendronization films were prepared by blending chitosan with 18% of polyvinyl pyrrolidone (PVP), and casting the resulting mixture. The degree of dendronization reached was 28%. The microspheres were prepared by coacervation/precipitation, after which the surfaces were activated with either epychlorohydrine (ECH) or 1,4-butanediol diglycidyl ether (BDGE). The oxirane groups were utilized to form covalent bonds between chitosan and dendrons. The degree of dendronization yielded with Behera's amine was 60% for both activating agents. When bis Behera's amine was used, the dendronization reached values of 15 and 21% when ECH or BDGE were used, respectively. The dendronized products were characterized through spectroscopic and microscopic studies and by determination of swelling indexes. Only one of the surfaces was dendronized in every film, which therefore presented a hydrophobic and a hydrophilic surface. Since these films maintain the properties of chitosan, they offer interesting potential as dressings for exuding wounds. The different surfaces make the microspheres potentially applicable as carriers for delivery and controlled release of drugs.     

Single-Crystal-to-Single-Crystal Topochemical Synthesis of a Collagen-inspired Covalent Helical Polymer

There is much demand for crystalline covalent helical polymers. Inspired by the helical structure of collagen, we synthesized a covalent helical polymer wherein the repeating dipeptide Gly-Pro units are connected by triazole linkages. We synthesized an azide and alkyne-modified dipeptide monomer made up of the repeating amino acid sequence of collagen. In its crystals, the monomer molecules aligned in head-to-tail fashion with proximally placed azide and alkyne forming supramolecular helices. At 60 °C, the monomer underwent single-crystal-to-single-crystal (SCSC) topochemical azide-alkyne cycloaddition polymerization, yielding a covalent helical polymer as confirmed by single-crystal X-ray diffraction (SCXRD) analysis. Compared to the monomer crystals, the polymer single-crystals were very strong and showed three-fold increase in Young's modulus, which is higher than collagen, many synthetic polymers and other materials. The crystals of this covalent helical polymer could bear loads as high as 1.5 million times of their own weight without deformation. These crystals could also withstand high compression force and did not disintegrate even at an applied force of 98 kN. Such light-weight strong materials are in demand for various technological applications.     

Single-molecule measurement of the strength of a siloxane bond

Increasing the mechanical stability of artificial polymer materials is an important task in materials science, and for this a profound knowledge of the critical mechanoelastic properties of its constituents is vital. Here, we use AFM-based single-molecule force spectroscopy measurements to characterize the rupture of a single silicon-oxygen bond in the backbone of polydimethylsiloxane as well as the force-extension behavior of this polymer. PDMS is not only a polymer used in a large variety of products but also an important model system for highly flexible polymers. In our experiments, we probe the entire relevant force range from low forces dominated by entropy up to the rupture of the covalent Si-O bonds in the polymer backbone at high forces. The resulting rupture-force histograms are investigated with microscopic models of bond rupture under load and are compared to density functional theory calculations to characterize the free-energy landscape of the Si-O bond in the polymer backbone.     

Hydrogen-bonded dendronized polymers and their self-assembly in solution

Frechet-type benzyl ether dendrons of second and third generations with a carboxyl group (G2, G3) at the apex site could attach to poly(4-vinylpyridine) (PVP), forming hydrogen-bonded dendronized polymers (HB denpols) in their common solvent, chloroform. The HB denpols show unique self-assembly behavior, forming vesicles in the common solvent under ultrasonic treatment. The structure and morphology of the vesicles were characterized by dynamic light scattering (DLS), static light scattering (SLS), SEM, TEM, and AFM. The size of the vesicles decreases and the thickness of the vascular membrane increases as the molar ratio of Gx/PVP increases. The hydrogen bonding, pi-pi aromatic stacking of the dendrons, and the considerable difference in architecture between the dendron Gx and PVP are the main factors facilitating the assembly of the HB denpols in the common solvent.     

Synthesis of narrow‐polydispersity degradable dendronized aliphatic polyesters

The divergent dendronization of an ?‐caprolactone‐based polymer has been performed to provide access to dendronized polymers with sufficient biocompatibility and degradability for use as drug‐delivery scaffolds. The synthesis was performed through the tin(II) 2‐ethylhexanoate‐catalyzed polymerization of a γ‐functionalized ?‐caprolactone monomer, followed by the divergent growth of pendant polyester dendrons at each repeat unit. The resulting dendronized polymers were obtained up to the fourth generation with molecular weights as high as 80,000 Da and with polydispersities between 1.11 and 1.22. The fourth‐generation hydroxyl‐terminated dendronized polymer was degradable under a variety of aqueous conditions. A comparison of the dendronization approach with a procedure involving the ring‐opening polymerization of a second‐generation dendritic macromonomer reveals that the former procedure is best suited for the preparation of this family of dendronized polyesters because it requires shorter reaction times and affords materials with higher degrees of polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3563–3578, 2004     

Surface structure analysis of thin dewetted polymer blend films

The surface structure of thin polymer blend films of deuterated polystyrene (dPS) and polyparamethylstyrene (PpMS) after annealing above the glass transition temperature was investigated. With scanning force microscopy (SFM) the surface topography originated by a dewetting process is detected. The sample surface is covered with small droplets consisting of several polymer molecules. Utilizing grazing incidence small angle neutron scattering (GISANS) the topographical information as well as the in‐plane composition is probed. For thin confined blend films a substructure of the droplets resulting from an additional phase separation process at different length scales is detected.     

Mechanophores with a Reversible Radical System and Freezing‐Induced Mechanochemistry in Polymer Solutions and Gels

Visualization and quantitative evaluation of covalent bond scission in polymeric materials are highly important for understanding failure, fatigue, and deterioration mechanisms and improving the lifetime, durability, toughness, and reliability of the materials. The diarylbibenzofuranone‐based mechanophore radical system enabled, through electron paramagnetic resonance spectroscopy, in situ quantitative evaluation of scission of the mechanophores and estimation of mechanical energy induced along polymer chains by external forces. The coagulation of polymer solutions by freezing probably generated force but did not cleave the mechanophores. On the other hand, cross‐linking led to efficient propagation of the force of more than 80 kJ mol^?1 to some mechanophores, resulting their cleavage and generation of colored stable radicals. This mechanoprobe concept has the potential to elucidate other debated issues in the polymer field as well.     

Multi-fractal imaging and structural investigation of silica hydrogels and aerogels

In this work, we report on the preparation of TEOS gels by means of the sol–gel method employing different TEOS/ethanol/water ratios at room temperature. Small-angle X-ray scattering (SAXS) measurements provide the first-generation structural parameters, which indicate that particle size and fractal dimension are synthesis and depth dependent. These results are supported by the second- and third-generation aggregates observed using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The fiber-like first-generation clusters aggregate as spherical second-generation particles which, in turn, in the third generation rearrange into complex structures.     

Synthesis and Conformations of Dendronized Poly(L-lysine)

Dendronized polymers based on a poly(L-lysine) backbone have been synthesized up to the fourth generation. The hydroxyl-terminated polymers are completely water-soluble, which makes them good candidates for drug delivery applications. The dendronized polypeptide backbones are helical at lower generations, but undergo a dramatic conformational change from alpha-helical to disordered upon increasing the dendron size to the third generation. This conformational change, attributed to steric repulsions between dendrons, is supported by spectroscopic measurements while chain extension upon dendronization is confirmed by scanning force microscopy.     

Enzymatic Synthesis,Amplification, and Application of DNA with a Functionalized Backbone

The ability to amplify DNA along with its unprecedented sequence control has led to its use for different applications, but all are limited by the properties available to natural nucleotides. We previously reported the evolution of polymerase SFM4‐3, which better tolerates 2′‐modified substrates. To explore the utility of SFM4‐3, we now report the characterization of its recognition of substrates with 2′‐azido, 2′‐chloro, 2′‐amino, or arabinose sugars. We find that SFM4‐3 can efficiently synthesize polymers composed of these nucleotides, and most interestingly, that SFM4‐3 can also PCR amplify these modified oligonucleotides. When combined with post‐amplification modification, the latter allows for the exponential amplification of polymers that may be functionalized with desired moieties arrayed in a controlled fashion, the utility of which we demonstrate with extensive small molecule functionalization and the production and initial characterization of a novel DNA hydrogel.     

Enzymatic Synthesis,Amplification, and Application of DNA with a Functionalized Backbone

The ability to amplify DNA along with its unprecedented sequence control has led to its use for different applications, but all are limited by the properties available to natural nucleotides. We previously reported the evolution of polymerase SFM4‐3, which better tolerates 2′‐modified substrates. To explore the utility of SFM4‐3, we now report the characterization of its recognition of substrates with 2′‐azido, 2′‐chloro, 2′‐amino, or arabinose sugars. We find that SFM4‐3 can efficiently synthesize polymers composed of these nucleotides, and most interestingly, that SFM4‐3 can also PCR amplify these modified oligonucleotides. When combined with post‐amplification modification, the latter allows for the exponential amplification of polymers that may be functionalized with desired moieties arrayed in a controlled fashion, the utility of which we demonstrate with extensive small molecule functionalization and the production and initial characterization of a novel DNA hydrogel.     

REDOX ACTIVE,MULTI-CHROMOPHORE RU(II) POLYPYRIDYL-CARBAZOLE COPOLYMERS: SYNTHESIS AND CHARACTERIZATION

A novel diimine ligand, 2-(2-pyridyl) 4-carboxyquinoline (pcq) and its corresponding polypyridyl Ru(II) complex were synthesized, characterized, and covalently attached to a carbazole based copolymer via post polymer modification. The resulting modified electroactive and multi-chromophoric polymer was readily characterized by UV-visible, FT-IR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and elemental and electrochemical analysis. Results from cyclic voltammetry and FT-IR analysis both confirmed the covalent attachment of redox active Ru(II) center into the polymer. The emission spectrum of the copolymer, in comparison to that of Ru(II) complex, demonstrated that the excited-state properties of the metal complex is maintained, in contrast to the electronic absorption spectrum, which is sensitive to the hydrophobic polymeric chain surrounding the redox sites. The thermal analysis suggested that this metallopolymer also possesses high thermal stability. The ruthenium content was also found to be 7%, which corresponds to 80% of the maximum loading, by elemental analysis.     

Disposable, low cost, silver-coated, piezoelectric quartz crystal biosensor and electrode protection

The use of a commercial, silver-coated, piezoelectric quartz crystal as a disposable, low cost and reliable immunosensor is presented. The protection of the silver electrode from undesirable oxidation was achieved by polystyrene or carboxy-poly(vinyl chloride) (PVC-COOH) modification. In addition to serving as protection for the electrode, polymer films provided a substrate for antibody immobilization by either physical adsorption or covalent linkage. Polystyrene modification showed an additional advantage of improvement of surface smoothness. The atomic force microscope (AFM) and scanning electron microscope (SEM) were used to evaluate the morphologies of polymer films obtained by dip or drop coating techniques. It was found that drop coating provided more significant improvement in surface smoothness than dip coating, and the resulting sensor surfaces were more suitable for in situ liquid phase assay. Although PVC-COOH-modified sensors were not suitable for liquid phase assay because of the high surface roughness, the covalent linkages (amide bonds) between antibodies and -COOH groups in the polymer film offered better sensor performance in ex situ assay in terms of a higher antibody binding capacity and better antigen detection sensitivity.