首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
<正> 聚偏氟乙烯(PVF_2)是一种半结晶聚合物,它至少存在α、β、γ和δ四种晶相结构。其中β相由于其与PVF_2的压电性和热电性直接相关而引起人们的广泛关注。在以前的工作中,我们研究了超速淬火对PVP_2晶相结构的影响。本工作用傅里叶变换红外光谱(FTIR)技术研究了聚甲基丙烯酸甲酯(PMMA)分子构型对淬火过程中PVF_2β相生成温度的影响.  相似文献   

2.
聚偏氟乙烯β相结晶研究   总被引:2,自引:0,他引:2  
用淬火、熔体拉伸和与其它聚合物共混的方法直接制得了聚偏氟乙烯(PVF_2)β相结晶.并深入地研究了淬火、熔体拉伸和共混物组分对PVF_2β相结晶的影响.  相似文献   

3.
聚偏氟乙烯(PVF2)至少有四种晶相结构,即α、β、γ和δ相,PVF2的压电性和热电性直接依赖其β相结构。 本工作报导以特殊的熔体拉伸方法制备不同组成偏氯乙烯(VF2)和四氟乙烯(VF4)的共聚物高取向薄膜与对其结构的研究结果。  相似文献   

4.
陈晔  杨德才 《应用化学》1990,7(3):60-63
我们曾研究超速淬火温度对聚偏氟乙烯(PVF_2)薄膜结晶结构的影响,在不同温度下淬火可分别得到α、β和γ三种晶型结构。本工作从非晶的玻璃态PVF_2出发,通过超速升温的方法,进一步研究结晶温度对PVF_2晶型结构的影响。  相似文献   

5.
细旦尼龙6纤维加工过程中的晶型转化行为   总被引:3,自引:0,他引:3  
通过引入富镧稀土化合物等添加剂,成功实现了细旦尼龙6纤维的熔融纺丝.考察了在纺丝卷绕成型以及牵伸过程中尼龙6纤维的晶型变化.借助XRD和FT-IR等研究手段,发现尼龙6在纺丝过程中可以生成亚稳态的B晶型晶体.这种β晶型经过沸水处理后很容易转化为α晶型,而γ晶型尼龙6经沸水处理后不发生相转变.因此可以通过沸水热处理的方法区分尼龙6的β和γ晶型.在纤维的卷绕过程中,当熔体拉伸倍数较高时,尼龙6可能产生β晶型;当熔体拉伸倍数较低时,则以γ晶型为主.在纤维的牵伸过程中,γ晶型经过β晶型中间态向α晶型相转变.上述结果对于指导改进细旦尼龙6纤维的加工工艺以及提高产品性能有指导意义.  相似文献   

6.
陈晔  杨德才 《应用化学》1993,10(1):86-88
聚甲基丙烯酸酯类(PMAs)是少数与聚偏氟乙烯(PVF_2)热力学相容的聚合物。PVF_2与聚甲基丙烯酸甲酯(PMMA)的共混体系已有不少研究,但多集中于两者的相容性,对其晶相研究较少。我们曾报道PMMA对高取向PVF_2薄膜晶相结构的影响。本工作用富里叶变换红外光谱(FTIR)和透射电子显微镜(TEM)等方法研究了PMAs对高取向PVF_2薄膜β相结晶的影响。实验中所用PVF_2和PMAs均为Polysiences公司提供。PVF_2分子量为1.4×10~5,聚  相似文献   

7.
全同立构聚丙烯的晶片形态   总被引:1,自引:0,他引:1  
本文应用光学显微镜,扫描和透射电子显微镜从三种不同层次的结构水平上研究了α和β两种晶型的全同立构聚丙烯的球晶和晶片形态结构,特别是应用四氧化钌染色技术直接观察到两种不同晶型聚丙烯球晶中单独分离的晶片形态.结果表明,不同晶型聚丙烯球晶的形态是不同的,其所呈现的性质与其内部晶片结构的排列特征相对应.同时研究了两种晶型聚丙烯在熔体拉伸结晶条件下生成的晶片形态,倾向于相同的取向晶片结构.电子衍射数据证明了,β型聚丙烯在拉伸取向结晶时将转变为α晶型.  相似文献   

8.
β型聚丙烯注塑件的分层结构与力学性能   总被引:9,自引:0,他引:9  
用X-射线衍射仪研究了不加和加成核剂形成不同晶型的三种聚丙烯注塑件的分层结晶结构,获得各层结晶度和β晶型含量(k_β)随皮芯距离的分布规律,测定了试件弯曲、拉伸和冲击性能。发现,纯等规聚丙烯试件主要含α晶型,皮层的结晶度和k_β低于芯层。加有α成核剂的试件仅含有α晶型,皮层的结晶度也低于芯层。加有β成核剂的试件主要含β晶型,皮层的结晶度和k_β值高于芯层。纯聚丙烯试件和β型为主的试件的分层结构中存在α晶和β晶间的转变。与α型聚丙烯相比,β型聚丙烯有较低的屈服强度,却有较高的抗张强度,显示很高的拉伸韧性和延展性,可明显提高室温以及玻璃化温度以下的低温抗冲击性能。  相似文献   

9.
β晶型聚丙烯的力学性质   总被引:2,自引:0,他引:2  
研究了主要含β晶型的聚丙烯在不同温度下的应力-应变性质,并与同一商品牌号得到的α晶型聚丙烯作了对比。发现,β晶型试样的屈服强度低于α晶型,而抗冲击强度则比α晶型试样高1—2倍。结合X射线衍射法对β晶型试样在拉伸过程中发生的晶型转变的研究及形变的分子机制解释了二种晶型试样在力学性质上的差异。  相似文献   

10.
等规聚丙烯(iPP)是典型的多晶型半结晶性聚合物,其常见晶型有单斜(α),三方(β),三斜(γ)以及四方或双四方(e),其中稳定性最好的α晶型和处于亚稳态的β晶型工业和经济价值较大,因此二者之间的相转变行为得到了人们的广泛关注.本文综述了近年来β→α-iPP生长相转变的研究进展.在高临界温度(141°C)和低临界温度(100°C)区间内,β-iPP生长速率高于α-iPP,而温度高于141°C,或低于100°C,由于α-iPP在动力学上占优势,β-iPP会发生向α-iPP的生长转变.但由于α-iPP是热力学上最稳定的晶型,β-iPP熔融重结晶过程也会发生β→α-iPP相转变.此外,拉伸形变过程中也会发生β→α-iPP相转变,广泛用于制备聚丙烯气体交换膜、过滤膜或锂电池隔膜等.目前对变形过程中的β→α-iPP相转变机理还存在争议,本文也对2种主要的机理进行了介绍,并对聚丙烯晶型转变行为的研究方向进行了展望.  相似文献   

11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.  相似文献   

12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

13.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

14.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.  相似文献   

15.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

16.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

17.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

18.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.  相似文献   

19.
Zhanhui Yang  Shiyi Yang  Jiaxi Xu 《Tetrahedron》2017,73(23):3240-3248
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.  相似文献   

20.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号