Synthesis of ansa-2,2′-bis[(4,7-dimethyl-inden-1-yl)methyl]-1,1′-binaphthyl and nsa-2,2′-bis[(4,5,6,7-tetrahydroinden1-yl)methyl]-1,1′-binaphthyltitanium and -zirconium dichlorides

2,2′-Bis[(4,7-dimethyl-inden-1-yl)methyl]-1,1′-binaphthyl and [2,2′-bis[(4,5,6,7-tetrahydroinden-1-yl)methyl]-1,1′-binaphthyl]titanium and -zirconium dichlorides have been synthesized from 2,2′-bis(bromomethyl)-1,1′-binaphthylene. 2,2′-Bis(bromomethyl)-1,1′-binaphthylene was alkylated with the lithium salt of 4,7-dimethylindene to yield 2,2′-bis[1-(4,7-dimethyl-indenylmethyl)]-1,1′-binaphthylene (S)-(−)-9. The lithium salt of 9 was metalated with either titanium trichloride followed by oxidation or zirconium tetrachloride to give titanocene dichloride (S)-(+)-10 and zirconocene dichloride 11. The known complexes ansa-[2,2′-bis[(1-indenyl)methyl]-1,1′-binaphthyl]titanium and -zirconium dichlorides were formed and hydrogenated to ansa-[2,2′-bis[(4,5,6,7-tetrahydroinden-1-yl)methyl]-1,1′-binaphthyl]titanium and -zirconium dichlorides 12 and 14 or to ansa-[2,2′-bis[(4,5,6,7-tetrahydroinden-1-yl)methyl]-5,5′,6,6′,7,7′,8,8′-octahydro-1,1′-binaphthyl]titanium dichloride 13 whose solid state structure was determined by X-ray crystallography. Complex 13 adopts a C₁-symmetrical conformation in the solid state, but is conformationally mobile in solution, exhibiting C₂-symmetry in its room temperature NMR spectra.     

Solvent-dependent conformational polymorphism in the crystal structure of mercuric bromide adduct of 1,1′-bis(diphenylphosphino)ferrocene

Two polymorphs of dinuclear mercury–iron complexes, [HgBr₂(dppf)] (1) where dppf is 1,1′-bis(diphenylphosphino)ferrocene, are prepared and crystal structures are determined by X-ray crystallography. The reaction of mercury(II) bromide with dppf in methanol–dichloromethane led to orange block polymorph. After crystallization of this complex in DMSO, a red needle polymorph was obtained.     

Platinum(II) complexes bearing 1,1'-bis(diphenylphosphino)ferrocene as building blocks for functionalized redox active porphyrins

Reactions of the cationic complex ions [PtMe(Me2SO)(PP)]+ (PP = dppf (1,1'-bis(diphenylphosphino)ferrocene) and dppe (1,2-bis(diphenylphosphino)ethane)) with 5,10,15,20-tetrakis(4-pyridyl)-21H,23H-porphyrin (TpyP) led to the formation of the symmetrical tetraplatinated porphyrin complexes, [PtMe(PP)]4TpyP.X4 (PP = dppf, X = CF3SO3-, 3, and PP = dppe, X = BF4-, 5) containing the organometallic fragment [PtMe(PP)]. The precursor sulfoxide platinum complexes [PtMe(Me2SO)(dppf)]CF3SO3, 2 and [PtMe(Me2SO)(dppe)]BF4, 4, were prepared by halide abstraction from [PtMeCl(dppf)], 1, and by controlled protonolysis of [PtMe2(dppe)] respectively, in the presence of a small amount of dimethyl sulfoxide. All these starting platinum(II) compounds, as well as the porphyrin derivatives 3 and 5, were fully characterized through elemental analysis, 1H NMR mono- and bidimensional, 31P[1H], 31P-1H HMBC, UV/Vis absorption and photophysical measurements. The X-ray crystal structure of complex 1 has been determined. In order to ascertain the electronic influence of ferrocene, the spectroscopic and redox properties of 3 were compared with those of TPyP and of the analogous 5. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), 1H and 31P NMR data, and UV/Vis data, all suggest a certain degree of communication between the central porphyrin and the peripheral hetero-bimetallic fragments. In contrast, no detectable interaction among these peripheral groups seem to come into play. Unlikely from the porphyrin derivative 5, formation of well defined fluorescent mesoscopic ring structures was easily achieved by simple evaporation from diluted dichloromethane solutions of 3.     

Structural consequences of oxidation of ferrocene derivatives : II. 1,1′,2,2′,4,4′-tris(trimethylene)ferrocenium perchlorate

The crystal and molecular structures of 1,1′,2,2′,4,4′-tris(trimethylene)ferrocenium perchlorate (I) were determined by X-ray crystallography. Despite the rigidity imparted to the molecule by the three non-adjacent bridges, the iron-to-ring distance of the cation was 4.4(4) pm longer than in the neutral compound, in agreement with what was reported for non-bridged ferrocene derivatives. The increased separation of the rings was accommodated by an increase in angle between the -carbon atoms and the ring-planes and by an increase in the ring-ring tilt angle.     

Asymmetric synthesis catalyzed by chiral ferrocenylphosphine-transition metal complexes VII. New chiral ferrocenylphosphines with C2 symmetry

A new chiral ferrocenylphosphine ligand, 2,2′-bis[1-N,N-dimethylamino)ethyl]-1,1′-bis(diphenylphosphino)ferrocene (2), which has C₂ symmetry and a functional group on the side chain, was prepared by ortho-lithiation and phosphination of 1,1′-bis[1-N,N-dimethylamino)ethyl]ferrocene followed by optical resolution; recrystallization of the diammonium salt with tartaric acid. An X-ray diffraction study of PdCl₂[(+)-2] showed that the complex has square-planar geometry with two cis chlorine and two phosphorus atoms and ligand (+)-2 has an (S) configuration on the 1-dimethylaminoethyl side chain and (R) ferrocene planar chirality.     

Synthesis and characterisation of monomeric, dimeric and polymeric ferrocenylacetylides. Crystal structure of 1,1′-bis(phenylethynyl)ferrocene

The reactions of alkynyltrimethylstannanes with 1,1′-dilithioferrocene have given several ferrocenylacetylides, namely 1-pheny]-ethynyl-1′-iodo-ferrocene (1), 1,1′-bis(phenylethynyl)ferrocene (2), 1,4-di(1′-iodoferrocenylethynyl)benzene (3) and poly[1,4-(1′-ferrocenylethynyl)ethynylbenzene] (4). The versatility of this reaction for the formation of ferrocenylacetylides is demonstrated. The crystal structure of 2 has been determined, and shown to involve a linear array of the groups with a cis arrangement of the phenylethynyl ligands.     

Synthesis of 1,1′-methylenedi[(1R,1′R,3R,3′R,5R,5′R)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] and derivatives: precursors of long-chain polyketides

Racemic 1,1′-methylene[(1RS,1′RS,3RS,3′RS,5RS,5′RS)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] ((±)-6) derived from 2,2′-methylenedifuran has been resolved kinetically with Candida cyclindracea lipase-catalysed transesterification giving 1,1′-methylenedi[(1R,1′R,3R,3′R,5R,5′R)-8-oxabicyclo[3.2.1]oct-6-en-3-ol] (−)-6 (30% yield, 98% ee) and 1,1′-methylenedi[(1S,1′S,3S,3′S,5S,5′S)-8-oxabicyclo[3.2.1]oct-6-en-3-yl] diacetate (+)-8, (40% yield, 98% ee). These compounds have been converted into 1,1′-methylenedi[(4S,4′S,6S,6′S)- and (4R,4′R,6R,6′R)-cyclohept-1-en-4,6-diyl] derivatives.     

Rate and mechanism of the reversible formation of cationic (eta3-allyl)-palladium complexes in the oxidative addition of allylic acetate to palladium(0) complexes ligated by diphosphanes

The oxidative addition of the allylic acetate, CH2=CH-CH2-OAc, to the palladium(o) complex [Pd0(P,P)], generated from the reaction of [Pd(dba)2, with one equivalent of P,P (P,P = dppb = 1,4-bis(diphenylphosphanyl)butane, and P,P = dppf = 1,1'-bis(diphenylphosphanyl)ferrocene), gives a cationic (eta3-allyl)palladium(II) complex, [(eta3-C3H5)Pd(P,P)+]. with AcO as the counter anion. This reaction is reversible and proceeds through two successive equilibria. The overall equilibrium constants have been determined in DMF. Compared with PPh3, the overall equilibrium lies more in favor of the cationic (eta3-allyl)palladium(II) complex when bidentate P,P ligands are considered in the order: dppb > dppf > PPh3. The reaction proceeds via a neutral intermediate complex [(eta2-CH=CH-CHCH2-OAc)Pd0(P,P)], which has been kinetically detected. The rate constants of the successive steps have been determined in DMF by UV spectroscopy and conductivity measurements. The overall complexation step of the Pd0 by the allylic acetate C=C bond is faster than the oxidative addition/ionization step which gives the cationic (eta3-allyl)palladium(II) complex.     

Synthesis and characterization of two cyclic organosiloxanes by multinuclear NMR spectroscopy and X-ray crystallography

1,3-[2′,6′-Pyridinebis(methyleneoxy)]-1,3-bis(diphenyl)cyclodisiloxane (9) and 2,6-pyridinebis(1,1-diphenylethoxy)diphenylsilane (11) were obtained from 2,6-pyridinediol derivatives with dichlorodiphenylsilane. An N→Si interaction is present in 2,6-pyridinebis(1,1-diphenylethoxy)diphenylsilane, which also shows fluxional behavior. The activation energy of 13.2 kcal mol⁻¹ for 11 was obtained for the intramolecular exchange between the phenyl groups from a variable-temperature ¹H-NMR study. The compounds were characterized by ¹H-, ¹³C- and ²⁹Si-NMR and their structures were established by X-ray crystallographic studies.     

Synthesis of new chiral amino ether derivatives: synthetic application of meso aziridinium ions prepared from β-amino alcohols

Methods of synthesis of new chiral amino ether derivatives through the opening of aziridinium ions, prepared in situ using trans-(±)-2-(1-N,N-dialkylamino)cyclohexyl mesylate with (R)-(+)-1,1′-bi-2-naphthol, are described. The (R,R,R)-diastereomer was obtained as the major product and isolated as an enantiopure salt, and characterized by single crystal X-ray analysis. The C₂-chiral (R,R,R,R,R)-diamino ether was obtained as the major product by opening of the aziridinium ion, prepared using trans-(±)-2-(1-pyrrolidino)cyclohexyl mesylate and (R)-(+)-1,1′-bi-2-naphthol in the presence of aq NaOH. This was also characterized by single crystal X-ray analysis.     

Alkali-metal-mediated manganationII of functionalized arenes and applications of ortho-manganated products in Pd-catalyzed cross-coupling reactions with iodobenzene

Extending the recently introduced concept of "alkali-metal-mediated manganation" to functionalised arenes, the heteroleptic sodium manganate reagent [(tmeda)Na(tmp)(R)Mn(tmp)] (1; TMEDA=N,N,N',N'-tetramethylethylenediamine, TMP=2,2,6,6-tetramethylpiperidide, R=CH2SiMe3) has been treated with anisole or N,N-diisopropylbenzamide in a 1:1 stoichiometry in hexane. These reactions afforded the crystalline products [(tmeda)Na(tmp)(o-C6H4OMe)Mn(tmp)] (2) and [(tmeda)Na(tmp){o-{C(O)N(iPr)2C6H4}Mn(CH2SiMe3] (3), respectively, as determined from X-ray crystallographic studies. On the basis of these products, it can be surmised that reagent 1 has acted, at least partially and ultimately, as an alkyl base in the first reaction liberating the silane Me4Si, but as an amido base in the second reaction liberating the amine TMPH. Both of these paramagnetic products 2 and 3 have contacted ion-pair structures, the key features of which are six-atom, five-element (NaNMnCCO) and seven-atom, five-element (NaNMnCCCO) rings, respectively. Manganates 2 and 3 were successfully cross-coupled with iodobenzene under [PdCl(2)(dppf)] (dppf=1,1'-bis(diphenylphosphino)ferrocene) catalysis to generate unsymmetrical biaryl compounds in yields of 98.0 and 66.2 %, respectively. Emphasizing the importance of alkali-metal mediation in these manganation reactions, the bisalkyl Mn reagent on its own fails to metalate the said benzamide, but instead produces the monomeric, donor-acceptor complex [Mn(R)2{(iPr)2-NC(Ph)(==O)}2] (5), which has also been crystallographically characterised. During one attempt to repeat the synthesis of 2, the butoxide-contaminated complex [{(tmeda)Na(R)(OBu)(o-C6H4OMe)Mn}2] (6) was obtained. In contrast to 2 and 3, due to reduced steric constraints, this complex adopts a dimeric arrangement in the crystal, the centrepiece of which is a twelve atom (NaOCCMnC)2 ring.     

Dinuclear PCP pincer complexes from Lewis acidic [Pd(OTf)(PCP)] and basic [Pd(4-Spy)(PCP)] (OTf = triflate; 4-Spy = 4-pyridinethiolate; PCP = (-)CH(CH(2)CH(2)PPh(2))(2))

The Lewis acidic pincer with a labile triflate ligand, viz. [Pd(OTf)(PCP)] (PCP = (-)CH(CH(2)CH(2)PPh(2))(2)) was prepared from [PdCl(PCP)] with AgOTf. It reacts readily with neutral bidentate ligands [L = 4,4'-bipyridine (4,4'-bpy) and 1,1'-bis(diphenylphosphino)ferrocene (dppf)] to give dinuclear PCP pincers [{Pd(PCP)}(2)(micro-L)][OTf](2) (L = 4,4'-bpy, 2; dppf,3). [PdCl(PCP)] also reacts with 4-mercaptopyridine in the presence of KOH to give a Lewis basic pincer with a free pyridine functional group [Pd(4-Spy)(PCP)]4. Its metalloligand character is exemplified by the isolation of an asymmetric dinuclear double-pincer complex [{Pd(PCP)}(2)(micro-4-Spy)][PF(6)] 6 bridged by an ambidentate pyridinethiolato ligand. Complexes 1, 2, 3, 4 and 6 have been characterized by single-crystal X-ray diffraction analyses.     

Synthesis and Crystal Structure of Dibromo [1,1′- bis(diphenylphosphino)ferrocene]cadmium(II)

1 INTRODUCTION The transition metal complexes containing ferrocene ligand arouse the interest of chemists because of their novel structures and special properties[1]. The ferrocene derivatives have been used in electrochemistry, in nonlinear optics, and as molecular ferromagnets. Some complexes of 1,1′-bis(diphenylphosphino)ferrocene (dppf) have been synthesized, and many of their crystal structures have been reported by far[2~5]. Here we report the synthesis and crystal structure of a …     

Substituted metal carbonyls XIII. Fe(CO)4(η-dppf) [where DPPF = (Ph2PC5H4)2Fe]: a convenient building block for heterometallic complexes

The potential of Fe(CO)₄(η¹-dppf) (dppf = 1,1′-bis(diphenylphosphino)ferrocene) as a precursor for heterometallic species is fully expanded in the synthesis of (OC)₄Fe(μ-dppf)Cr(CO)₅, (OC)₄Fe(μ-dppf)W(CO)₅, and (OC)₄Fe(μ-dppf)Mn₂(CO)₉, all of which have been characterized by IR, NMR (¹H and ³¹P) and elemental analyses. The low energy requirement of TMNO (Me₃NO · 2H₂O)decarbonylation allows the formation of monosubstituted Mn₂(CO)₁₀ as the major product. This aspect is further substantiated by the isolation of Mn₄(CO)₁₈(μ-dppf) in which the single bridging of a diphosphine group between two Mn₂(CO)₉ moieties is unprecedented.     

Gold(I) complexes bearing mixed-donor ligands derived from N-heterocyclic carbenes

The new 2-phenylthiocarbamoyl-1,3-dimesitylimidazolium inner salt (IMes·CSNPh) reacts with [AuCl(L)] in the presence of NH(4)PF(6) to yield [(L)Au(SCNPh·IMes)](+) (L = PMe(3), PPh(3), PCy(3), CNBu(t)). The carbene-containing precursor [(IDip)AuCl] reacts with IMes·CSNPh under the same conditions to afford the complex [(IDip)Au(SCNPh·IMes)](+) (IDip = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene). Treatment of the diphosphine complex [(dppm)(AuCl)(2)] with one equivalent of IMes·CSNPh yields the digold metallacycle, [(dppm)Au(2)(SCNPh·IMes)](2+), while reaction of [L(2)(AuCl)(2)] with two equivalents of IMes·CSNPh results in [(L(2)){Au(SCNPh·IMes)}(2)](2+) (L(2) = dppb, dppf, or dppa; dppb = 1,4-bis(diphenylphosphino)butane, dppf = 1,1'-bis(diphenylphosphino)ferrocene, dppa = 1,4-bis(diphenylphosphino)acetylene). The homoleptic complex [Au(SCNPh·IMes)(2)](+) is formed on reaction of [AuCl(tht)] (tht = tetrahydrothiophene) with two equivalents of the imidazolium-2-phenylthiocarbamoyl ligand. This product reacts with AgOTf to yield the mixed metal compound [AuAg(SCNPh·IMes)(2)](2+). Over time, the unusual trimetallic complex [Au(AgOTf)(2)(SCNPh·IMes)(2)](+) is formed. The sulfur-oxygen mixed-donor ligands IMes·COS and SIMes·COS (SIMes = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene) were used to prepare [(L)Au(SOC·IMes)](+) and [(L)Au(SOC·SIMes)](+) from [(L)AuCl] (L = PPh(3), CN(t)Bu). The bimetallic examples [(dppf){Au(SOC·IMes)}(2)](2+) and [(dppf){Au(SOC·SIMes)}(2)](2+) were synthesized from the reaction of [(dppf)(AuCl)(2)] with the appropriate ligand. Reaction of [(tht)AuCl] with one equivalent of IMes·COS or SIMes·COS yields [Au(SOC·IMes)(2)](+) and [Au(SOC·SIMes)(2)](+), respectively. The compounds [(Ph(3)P)Au(SCNPh·IMes)]PF(6), [(Cy(3)P)Au(SCNPh·IMes)]PF(6) and [Au(AgOTf)(2)(SCNPh·IMes)(2)]OTf were characterized crystallographically.     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Intense Near- and Mid-infrared Absorbing Films of Electrochemically Crosslinked Multinuclear Metallodithiolene Complex Polymers

Novel multinuclear metallodithiolene complexes [(Cbz)₂-BTT-Pd(dppf)]₂Ni[6b, Cbz=carbazole, BTT=benzene-1,2,4,5-tetrathiotate, dppf=1,1'-bis(diphenylphosphino) ferrocene] and polymer [(Cbz)₂-BTT-Ni]_n·[(Et)3(PhCH2)N]_x(7b) with the carbazole pendent groups were synthesized and characterized. The thin films of crosslinked polymers P6b and P7b were prepared by electrochemical polymerization of compounds 6b and 7b, respectively. These films show intense and broad absorption in the near- and mid-infrared spectral regions(P6b: 1000-1600 nm, λ_max=1297 nm; P7b: 800 nm-8 μm, λ_max=3.9 μm) and are potentially useful as infrared optical materials.     

Synthesis,crystal structures,and third-order nonlinear optical properties of a series of ferrocenyl organometallics

Three novel ferrocenyl complexes [Zn(4-PFA)(2)(NO(3))(2)](H(2)O) (1), [Hg(2)(OAc)(4)(4-BPFA)(2)](CH(3)OH) (2), and [Cd(2)(OAc)(4)(4-BPFA)(2)] (3) (4-PFA = [(4-pyridylamino)carbonyl]ferrocene, 4-BPFA = 1,1'-bis[(4-pyridylamino)carbonyl]ferrocene) were prepared, and complexes 1 and 2 were structurally characterized by means of X-ray single-crystal diffraction. In complex 1, the zinc(II) atom is coordinated at a distorted tetrahedral environment by two nitrogen atoms from two 4-PFA moieties and two oxygen atoms from two nitrate anions; [Zn(4-PFA)(2)(NO(3))(2)] units are linked by hydrogen bonds N-H.O and O-H.O forming one-dimensional chains. Complex 2 is a tetranuclear macrocycle compound consisting of two 4-BPFA moieties and two Hg atoms; [Hg(2)(OAc)(4)(4-BPFA)(2)] units form 1-D chains by hydrogen bonds N-H.O as complex 1. Some complexes with 1,1'-bisubstituted pyridine-containing ferrocene ligands have been described, but their crystal data are limited. Compound 2 is the first example of a macrocyclic pyridine-containing ferrocenyl complex. The third-order nonlinear optical (NLO) properties of 4-PFA, 4-BPFA, and complexes 1-3 were determined by Z-scan techniques. The results indicate that all the compounds exhibit strong self-focusing effect. The hyperpolarizability gamma values are calculated to be in the range 1.51 x 10(-)(28) to 3.12 x 10(-)(28) esu. The gamma values are nearly twice as large for complexes 1-3 as for their individual ligands, showing that the optical nonlinearity of the complexes is dominated by the ligands.     

Homoleptic carbene complexes VI. Bis{1,1′-methylene-3,3′-dialkyl-diimidazolin-2,2′-diylidene}palladium chelate complexes by the free carbene route

1,1′-Methylene-3,3′-dialkyldiimidazolium salts have been deprotonated with n-butylithium in the presence of palladium(II) iodide to give the percarbene complexes 1 (alkyl=Me) and 2 (alkyl=Et), each containing two bidentate 1,1′-methylene-3,3′-dialkyldiimidazolin-2,2′-diylidene chelate ligands. The X-ray structure analysis of 1 reveals a stereochemistry in which the two spiro-linked six-membered metallacycles adopt boat-like conformations strongly bending out of the PdC₄ coordination plane in opposite directions. The carbenoid imidazole rings, which are rotated by +42 and −43°, respectively, relative to this plane, break down into two tightly bound π-systems (N=4C=4N,= C=C) connected by long C---N bonds.     

The synthesis, coordination chemistry and ethylene polymerisation activity of ferrocenediyl nitrogen-substituted ligands and their metal complexes

Treatment of aminoferrocene with substituted 2-hydroxybenzaldehydes yields the air- and moisture-stable ligands 1–4, which were then reacted to form the chromium dichloride complexes 5–7 and the nickel bis-chelate species 8 and 9. The metal compounds are very air-sensitive but the chromium compounds act as pre-catalysts for the polymerisation of ethylene. Reaction of 1,1′-bis(amino)ferrocene with similarly substituted 2-hydroxybenzaldehyes or simple benzaldehyde gives the ligands 10–12 and 17, respectively. The X-ray crystal structure of 11 shows the molecule to have non-crystallographic C₂ symmetry and to be linked by C–Hπ interactions between the anthracene rings. Titanium-containing complexes 13–16 can be formed utilising ligands 10–12 and there is a change in geometry within the complexes dependent on the adjacent co-ligands, whilst ligand 17 can be reacted with PdClMe(COD) to form the chelate complex 18. Cyclic voltammetric studies have been carried out on 18 and its oxidised analogue 19, but both complexes are inactive towards ethylene polymerisation.