Crystal structure and magnetism of UFe3B2

The structure of the UFe₃B₂ compound has been refined down to R=0.022 and wR₂=0.052 from single crystal X-ray diffraction data. This uranium boride crystallizes in the CeCo₃B₂ type-structure (P6/mmm space group no. 191, Z=1, ρ=10.79 g/cm³), with lattice parameters at room temperature a=0.5052(1) nm, c=0.3002(1) nm and V=0.664(1) nm³. Magnetization measurements made between 2 K and 800 K suggested that UFe₃B₂ is an antiferromagnet with a rather high Néel temperature of T_N=268±5 K. No other magnetic transitions were observed down to the lowest studied temperature.     

Temperature-dependent photoluminescence in La2/3Ca1/3MnO3

Visible photoluminescence and its temperature dependence of La_2/3Ca_1/3MnO₃ in the temperature range 138-293 K were measured. It was observed that the main broad band centered at ∼1.77 eV with the shoulders at ∼1.57 and ∼1.90 eV existed in the entire temperature range. It can be well fitted by three Gaussian curves B₁, B₂ and B₃ centered at ∼1.52, ∼1.75 and ∼1.92 eV, respectively. The intensities of the peak B₁ and B₂ vary as temperature increases. In the entire temperature range, the intensity of B₁ increases with increasing temperature, whereas that of B₂ decreases. The photoluminescence mechanisms for La_2/3Ca_1/3MnO₃ are presented based on the electronic structures formed by the interactions among spin, charge and lattice, in which B₁ was identified with the charge transfer excitation of an electron from the lower Jahn-Teller split e_g level of a Mn³⁺ ion to the e_g level of an adjacent Mn⁴⁺ ion, B₂ is assigned to the transition between the spin up and spin down e_g bands separated by Hund's coupling energy E_J and B₃ is attributed to the transition, determined by the crystal field energy E_C, between a t_2g core electron of Mn³⁺ to the spin up e_g bands of Mn⁴⁺ by a dipole allowed charge transfer process.     

Th3Ni2B2N3 a possible new superconducting compound: insights from electronic band structure

La₃Ni₂B₂N₃, which is similar to YNi₂B₂C and related borocarbides, was earlier studied by the electronic structure calculations [D.J. Singh, W.E. Pickett, Phys. Rev. B 51 (1995) 8668.], and was predicted to be a 3-D metal. In search of new compounds of the borocarbide and related families to get higher T_C, we have studied the compound Th₃Ni₂B₂N₃, by the first principles full potential electronic structure calculations by the linear augmented plane wave method. We get similar band structure for Th₃Ni₂B₂N₃ as found for La₃Ni₂B₂N₃, and the various atom-split component density of states show similar properties. The total electron density of states at Fermi level has been increased to about 92 states per Ry per f.u. as compared to 57 states per Ry per f.u. in La₃Ni₂B₂N₃. The main increase is due to the increased hybridization of the 5f states as seen by the more prominent low energy tail in the Th-component density of states. Based on this enhancement we predict Th₃Ni₂B₂N₃ to be a high temperature superconductor with a T_c in excess of 30 K.     

Magnetic properties and hyperfine interactions in RCo2B2 (R = Nd,Gd, Tb)

The magnetic properties of RCo₂B₂ compounds which crystallize in the ThCr₂Si₂ structure with R = Nd, Gd, Tb have been investigated. The magnetic structure is ferromagnetic for NdCo₂B₂ and GdCo₂B₂, T_c equals 32 and 26 K respectively and antiferromagnetic for TbCo₂B₂ (T_N = 19 K). Curie-Weiss behaviour is exhibited by all the compounds and the effective moments derived indicate that Co is diamagnetic. The difference in magnetic properties between RCo₂B₂ and other isomorphous RCo₂X₂ (X = Si, Ge) is discussed. Mössbauer studies of ¹⁵⁵Gd in GdCo₂B₂ yielded the hyperfine interaction parameters and determined the direction of the magnetization to be in the basal plane. The electric quadropole interaction at 4.1 K is 580 MHz sec^?1, this is the largest ever found in an intermetallic Gd containing compound.     

Electronic structure of LaRh3B2 and CeRh3B2

The electronic structures of LaRh₃B₂ and CeRh₃B₂ have been calculated using the self-consistent KKR method and are discussed in terms of recent experimental results.     

Temperature induced structural transformation in RRh3B2 (R  Sm,Gd) compounds

Quadrupole interaction measurements as a function of temperature in ¹¹¹In doped SmRh₃B₂ compounds show a structural transformation in the vicinity of ¹¹¹Cd probe nuclei. The results are consistent with a local structural change from hexagonal CaCu₅ type to the base centred monoclinic which prevails for heavy rare-earth compounds.     

Possible observation of the coexistence of superconductivity and long-range magnetic order in NdRh4B4

The ternary rare earth compound NdRh₄B₄ has been studied by means of critical field, low temperature heat capacity, and static magnetic susceptibility measurements. Features in the upper critical field and heat capacity data at 1.31 K and 0.89 K suggest the occurrence of long-range magnetic order in the superconducting state. The temperature dependence of the static magnetic susceptibility follows a Curie-Weiss law with an effective magnetic moment μ_eff = 3.58 ± 0.05 μ_B and a Curie-Weiss temperature θ_p = ?6.2 ± 1.0 K between 20 K and room temperature. However,, magnetization vs. applied magnetic field isotherms suggest the development of a ferromagnetic component in the Nd³⁺ magnetization at low temperatures.     

The heat capacity of the layer compounds (CH3CH2CH2NH3)2MnCl4 and (CH3CH2CH2NH3)2CdCl4 from 10 K TO 300 K

The heat capacity of the layer compounds tetrachlorobis (n-propylammonium) manganese II and tetrachlorobis (n-propylammonium) cadmium II, (CH₃CH₂CH₂NH₃)₂MnCl₄ and (CH₃CH₂CH₂NH₃)₂CdCl₄ respectively, has been measured over the temperature range 10 K ?T ? 300 K.Two known structural phase transitions were observed for the Mn compound in this temperature region: at T = 112.8 ± 0.1 K (ΔH_t= 586 ± 2 J mol^?1; ΔS_t = 5.47 ± 0.02 J K^?1mol^?1) and at T =164.3 ± (ΔH_t = 496 ± 7 J mol^?1; ΔS_t =3.29 ± 0.05 J K^?1mol^?1). The lower transition is known to be from a monoclinic structure to a tetragonal structure, while the upper is from the tetragonal phase to an orthorhombic one. From comparison with the results for the corresponding methyl Mn compound it is deduced that the lower transition primarily involves changes in H-bonding while the upper transition involves motion in the propyl chain.A new structural phase transition was observed in the Cd compound at T= 105.5 ± 0.1 K (ΔH_t= 1472.3 ± 0.1 J mol^?1; ΔS_t = 13.956 ± 0.001 J K^?1mol^?1), in addition to two transitions that have been observed previously by other techniques. The higher of these transitions(T = 178.7 ± 0.3 K; ΔH_t = 982 ± 4 J mol^?1 ΔS_t = 6.16 ± 0.02 J K^? mol^?1) is known to be between two orthorhombic structures, while the structural changes at the lower transition (T= 156.8 ± 0.2 K; ΔH_t = 598 ± 5 J mol^?1, ΔS_t = 3.85 ± 0.03 J K^?1 mol^?1) and at the new transition are not known. It is proposed that these two transitions correspond respectively to the tetragonal to orthorhombic and monoclinic to tetragonal transitions in the propyl Mn compounds.In addition to the structural phase transitions (CH₃CH₂CH₂NH₃)₂MnCl₄ magnetically orders at t? 130 K. The magnetic contribution to the heat capacity is deduced from the heat capacity of the corresponding diamagnetic Cd compound and is of the form expected for a quasi 2-dimensional Heisenberg antiferromagnet.     

A novel blue-emitting phosphor: BaAl2B2O7: Pb

Pb²⁺ doped BaAl₂B₂O₇ materials were prepared by a solution combustion synthesis. The phase of the synthesized materials was determined using the powder X-ray diffraction. The photoluminescent properties of Pb²⁺ doped BaAl₂B₂O₇ materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of BaAl₂B₂O₇: Pb²⁺ were observed at 423 and 266 nm, respectively. The dependence of the emission intensity on the Pb²⁺ concentration for BaAl₂B₂O₇: Pb²⁺ was investigated. The Stokes shifts of BaAl₂B₂O₇: Pb²⁺ was calculated to be 13 953 cm⁻¹.     

Non-linear temperature dependence of the low temperature specific heat of vitreous B2O3

The specific heat of virteous B₂O₃ has been measured between 50 mK and 1 K. The excess to the calculated acoustic term is found to vary as T^1.45 below 0.7K as opposed to the linear law generally observed. This may be attributed to the particular structure of this glass.     

Similar luminescent behavior in an established rhenacarborane complex, [3,3-(CO)2-3-NO-closo-3,1,2-ReC2B9H11] and a new complex anion, [3,3,3-(CO)3-8-I-closo-3,1,2-ReC2B9H10]

The compounds [3,3-(CO)₂-3-NO-closo-3,1,2-ReC₂B₉H₁₁] and [NEt₄][3,3,3-(CO)₃-8-I-closo-3,1,2-ReC₂B₉H₁₀] have been shown to be emissive in MeTHF at 77 K, with λ_max in the blue region of the visible spectrum. Emission from [3,3,3-(CO)₃-8-I-closo-3,1,2-ReC₂B₉H₁₀]^-, which has been structurally characterized, is phosphorescent with a single exponential decay lifetime, τ=1.65 ms. The complex [3,3-(CO)₂-3-NO-closo-3,1,2-ReC₂B₉H₁₁] also emits in the solid state at 298 K and has been shown by diffuse-reflectance UV-vis measurement to have a band gap of 2.66 eV.     

Magnetic anisotropy in Co73Mo2Si15B10 and (Co0.89Fe0.11) 72Mo3Si15B10 metallic glasses,induced by stress-annealing

Annealing temperature dependence of the stress-induced magnetic anisotropy in Co₇₃Mo₂Si₁₅B₁₀ (λ_s < 0) and (Co_0.89Fe_0.11) ₇₂Mo₃Si₁₅B₁₀ (λ > 0) metallic glass ribbons has been studied experimentally. The room temperature values of the induced anisotropy constants K depend strongly on the annealing conditions, and reveal a change of sign at annealing temperatures well below T_cryst. It is concluded that transient creep and steady-state creep at the elevated temperature give rise to compressive and tensile stresses, respectively, in the expression for the magnetoelastic coupling energy at room temperature.     

Synthesis and luminescence properties of europium doped YBa3B9O18

Europium (Eu³⁺) doped YBa₃B₉O₁₈ were synthesized by conventional solid state solidification methods. (Y_1−xEu_x)Ba₃B₉O₁₈ formed solid solutions in the range of x=0–1.0. The luminescence property measurements upon excitation in ultraviolet–visible range show well-known Eu³⁺ excitation and emission. The charge transfer excitation band of Eu³⁺ dominates the excitation spectra. The emission spectrum of Eu³⁺ ions consists mainly of several groups of lines in the 550–720 nm region, due to the transitions from the ⁵D₀ level to the levels ⁷F_J (J=0, 1, 2, 3, 4) of Eu³⁺ ions. The dependence of luminescence intensity on Eu³⁺ concentration shows no concentration quenching for fully concentrated EuBa₃B₉O₁₈. Eu³⁺ doped YBa₃B₉O₁₈ are promising phosphors for applications in displays and optical devices.     

Enhanced luminescence of Ca3B2O6:Dy phosphors by Na-codoping for LED applications

The Ca_2.95−yDy_0.05B₂O₆:yNa⁺ (0≤y≤0.20) phosphors were synthesized at 1100 °C in air by the solid-state reaction route. The as-synthesized phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE), photoluminescence (PL) spectra and thermoluminescence (TL) spectra. The PLE spectra show the excitation peaks from 300 to 400 nm due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid-state lighting and light-emitting diodes (LEDs). The emission of Dy³⁺ ions on 350 nm excitation was observed at 480 nm (blue) due to the ⁴F_9/2→⁶H_15/2 transitions, 575 nm (yellow) due to ⁴F_9/2→⁶H_13/2 transitions and 660 nm (red) due to weak ⁴F_9/2→⁶H_11/2 emissions. The PL results from the investigated Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors show that Dy³⁺ emissions increase with the increase of the Na⁺ codoping ions. The integral intensity of yellow to blue (Y/B) can be tuned by controlling Na⁺ content. By the simulation of white light, the optimal CIE value (0.328, 0.334) can be achieved when the content of Na⁺-codoping ions is y=0.2. The results imply that the Ca_2.95−yDy_0.05B₂O₆:yNa⁺ phosphors could be potentially used as white LEDs.     

Low temperature magnetization behavior in Co36Fe36Si3Al1Nb4B20 (at%) nanostructured alloy

The investigation addresses low temperature magnetization behavior in Co₃₆Fe₃₆Si₃Al₁Nb₄B₂₀ alloy ribbons in their as-spun as well as annealed state. Optimum heat treatment at 875 K led to nanocrystallization whereby bcc-(FeCo)SiAl nanoparticles were dispersed in an amorphous matrix as evidenced from transmission electron microscopy. Low temperature magnetization studies were carried out in the range 77-300 K. Using the method of mathematical fittings, magnetization extrapolated to 0 K was obtained. The dependence of the magnetization with respect to temperature of BT^3/2 was used to determine the Bloch coefficient “B” and spin wave stiffness constant “D”. Magnetic softening revealed by lowering in the coercivity in the optimum nanostructured state was also the cause of a drop in the stiffness constant. The range of exchange interaction given by D/T_C was higher in the nanostructured state compared to the as-spun amorphous state. The effect of nanocrystallization and the resulting ferromagnetic coupling was further evidenced by low temperature magnetization studies.     

Room temperature stable structures and phase transition of Na2Al2B2O7

By Rietveld refinement of the X-ray diffraction (XRD) data of powdered Na₂Al₂B₂O₇ samples aged for over 3 months, we found that Na₂Al₂B₂O₇ at room temperature is a mixture of two phases with space group and P6₃/m, respectively. The structures of the two phases can be refined with identical cell parameters of a=4.80760(11) Å, c=15.2684(5) Å and are composed by [Al₂B₂O₇]²⁻_∝ double layers stacking alternatively with Na⁺ ions along the c-direction, but differ at in-plane bond orientations of the BO₃/AlO₄ groups within the double layers: in P6₃/m phase B-O₁/Al-O₁ bonds of the two layers are perfectly aligned, whereas in phase they are twisted by 46.4/41.6° around c-axis against each other. It is also found that a freshly prepared sample contains only the phase, but part of the phase will transfer to P6₃/m phase slowly at room temperature and the transition can be reversed by heating the aged sample above 220 °C.     

Synthesis and characterization of thermoluminescent Li2B4O7 nanophosphor

Lithium borate (Li₂B₄O₇) is a low Z_eff, tissue equivalent material that is commonly used for medical dosimetry using the thermoluminescence (TL) technique. Nanocrystals of lithium borate were synthesized by the combustion method for the first time in the laboratory. TL characteristics of the synthesized material were studied and compared with those of commercially available microcrystalline Li₂B₄O₇. The optimum pre-irradiation annealing condition was found to be 300 °C for 10 min and that of post-irradiation annealing was 300 °C for 30 min. The synthesized Li₂B₄O₇ nanophosphor has very poor sensitivity for low doses of gamma up to 10¹ Gy whereas from 10¹ to 4.5×10² Gy this phosphor exhibits a linear response and then from 4.5×10² to 10³ Gy it shows supralinearity. Thermoluminescence properties of Li₂B₄O₇ nanophosphor doped with Cu has also been investigated in this paper. It shows low fading and a linear response over a wide range of gamma radiation from 1×10² to 5×10³ Gy. Therefore the synthesized lithium borate nanophosphor doped with Cu may be used for high dose measurements of gamma radiations.     

Electrical resistivity of amorphous metallic glasses Fe80B80 and Fe78Mo2B20 between 78 and 1000 K

Electrical resistivity (ρ) of amorphous Fe₈₀B₂₀ and Fe₇₈Mo₂B₂₀ have been studied as a function of temperature (T) between 78 and 1000 K. The ρ vs T curves, obtained with specified warming and cooling rates, show that such curves are sensitive probes of the crystallization process. Within the experimental error, no anomalies in the ρ behavior can be seen at the Curie temperature of each amorphous alloy.     

New red phosphors BaZr(BO3)2 and SrAl2B2O7 doped with Eu for PDP applications

Vacuum ultraviolet (VUV) excitation and photoluminescence (PL) characteristics of Eu³⁺ ion doped borate phosphors; BaZr(BO₃)₂:Eu³⁺ and SrAl₂B₂O₇:Eu³⁺ are studied. The excitation spectra show strong absorption in the VUV region with the absorption band edge at ca. 200 nm for BaZr(BO₃)₂:Eu³⁺ and 183 nm for SrAl₂B₂O₇:Eu³⁺, respectively, which ensures the efficient absorption of the Xe plasma emission lines. In BaZr(BO₃)₂:Eu³⁺, the charge transfer band of Eu³⁺ does not appear strongly in the excitation spectrum, which can be enhanced by co-doping Al³⁺ ion into the BaZr(BO₃)₂ lattices. The luminescence intensity of BaZr(BO₃)₂:Eu³⁺ is also increased by Al³⁺ incorporation into the lattices. The PL spectra show the strongest emission at 615 nm corresponding to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺ in both BaZr(BO₃)₂ and SrAl₂B₂O₇, similar to that in YAl₃(BO₃)₄, which results in a good color purity for display applications.