Hydrogel characteristics of electron-beam-immobilized poly(vinylpyrrolidone) films on poly(ethylene terephthalate) supports

A novel strategy for the preparation of thin hydrogel coatings on top of polymer bulk materials was elaborated for the example of poly(ethylene terephthalate) (PET) surfaces layered with poly(vinylpyrrolidone) (PVP). PVP layers were deposited on PET foils or SiO2 surfaces (silicon wafer or glass coverslips) precoated with PET and subsequently cross-linked by electron beam treatment. The obtained films were characterized by ellipsometry, X-ray photoelectron spectroscopy, infrared spectroscopy in attenuated total reflection, atomic force microscopy (AFM), and electrokinetic measurements. Ellipsometric experiments and AFM force-distance measurements showed that the cross-linked layers swell in aqueous solutions by a factor of about 7. Electrokinetic experiments indicated a strong hydrodynamic shielding of the charge of the underlying PET layer by the hydrogel coatings and further proved that the swollen films were stable against shear stress and variation of pH. In conclusion, electron beam cross-linking ofpreadsorbed hydrophilic polymers permits a durable fixation of swellable polymer networks on polymer supports which can be adapted to materials in a wide variety of shapes.     

Large uniform-sized polymer beads for use as solid-phase supports prepared by ascension polymerization

Large uniform-sized polymer beads are desirable for "one-bead-one-compound" applications in the combinatorial synthesis of compound libraries. We have developed a technique for the preparation of large polymer spheres with narrow size distributions. Uniform-sized poly(styrene-co-divinylbenzene) beads with diameters in excess of 1 mm have been prepared by free radical polymerization in an ascension process through a heated column. The size of the beads can be adjusted by the diameter of the injection needle and the injection speed. The resin beads can be made porous by the incorporation of a porogen during the preparation; they reach a specific surface area in excess of 200 m(2)/g. The mechanical properties of the spheres and their use in organic synthesis have been studied.     

Plasmachemical surface functionalised beads: versatile tailored supports for polymer assisted organic synthesis

Plasmachemical surface modification of porous polystyrene beads with allylamine or diaminopropane provides reactive amine functionality exclusively at accessible surface sites, allowing faster reactions than classically prepared materials.     

Functionalized cross-linked poly(vinyl alcohol) resins as reaction scavengers and as supports for solid-phase organic synthesis

New hydrophilic poly(vinyl alcohol) (PVA-OH) resins were prepared by an inverse suspension polymerization using epichlorohydrin as a cross-linker. These novel resins swell in a variety of solvents commonly used in solid-phase organic synthesis, such as dicholomethane, dioxane, methanol, tetrahydrofuran, and dimethylformamide. In addition, PVA-OH shows excellent swelling in water. The cross-linked PVA-OH beads were functionalized with an aldehyde group and were tested as scavengers for primary amines in three different reactions: amide bond formation, reductive amination reaction, and urea formation. With 1-2 equiv of the PVA aldehyde resin, all the excess primary amines were successfully scavenged. The utility of PVA-OH resins as solid supports in mono- and dipeptide synthesis was also investigated using symmetrical anhydride and MSNT/MeIm (2,4,6-mesitylenesulfonyl-3-nitro-1,2,4-triazolide in the presence of 1-methylimidazol) methods.     

Composite thin film by hydrogen-bonding assembly of polymer brush and poly(vinylpyrrolidone)

Based on hydrogen-bonding layer-by-layer (LBL) assembly in aqueous solution, poly(vinylpyrrolidone) (PVPON) and a spherical polymer brush with a poly(methylsilsesquioxane) (PSQ) core and poly(acrylic acid) (PAA) hair chains were used to fabricate composite multilayer thin films. Hydrogen bonding as the driving force was confirmed by FT-IR spectrometry. A simple method (Filmetric F20) was introduced to determine the thickness and refractive index of the films. The film thickness was found to be a linear function of the number of bilayers. The average increase in thickness per bilayer is 28.3 nm. The film morphology was characterized with scanning electron microscopy and atomic force microscopy. The images obtained from the two instruments show a great resemblance. The films were further calcined to get an inorganic film by removing the organic components, or treated with tetrabutylammonium fluoride (TBAF) to remove the PSQ core and get an organic film. The optical properties and morphological changes induced by these treatments were also studied.     

Synthesis and evaluation of poly(oxyethylene glycol) polymer (POP) supports

Mono- and alpha,omega-bis-styryl-oligo(oxyethylene glycol) ethers have been constructed in an efficient two-step synthesis. From these precursors, poly(oxyethylene glycol) polymer (POP) supports of varying monomer and cross-linker composition have been produced. The swelling properties and mass-solvent uptake of these novel materials have been evaluated in a variety of solvents, demonstrating that POP supports exhibit enhanced solvent compatibilities over the commercial resins TENTA-GEL, ARGO-GEL, and Merrifield's resin. The utility of POP supports in solid-phase organic chemistry has also been demonstrated successfully. It is anticipated that these high-loading polymeric supports will have generic application in the solid-phase synthesis of combinatorial libraries and the in situ screening of these libraries in the aqueous environment of a bioassay.     

Preparation, characterization, and application of poly(vinyl alcohol)-graft-poly(ethylene glycol) resins: novel polymer matrices for solid-phase synthesis

Spherical crosslinked poly(vinyl alcohol) (PVA) beads with good mechanical stability were prepared by reverse-suspension polymerization, using dimethyl sulfoxide (DMSO) as a cosolvent in an aqueous phase. Poly(ethylene glycol)s with varying chain lengths were grafted onto the PVA beads by anionic polymerization of ethylene oxide. The thermal behavior, morphology, and swelling were evaluated for each of the new polymer matrices. High loading and good swelling in water and organic solvents were characteristic of the PEG-grafted PVA beads. The polymer beads also exhibited good mechanical and chemical stability and were unaffected by treatment with 6 N HCl and with 6 N NaOH. The hydroxyl groups of the PVA-PEG beads were converted into aldehyde, carboxylic acid, and isocyanate functions to provide scavenger resins and were extended by way of a benzyl alcohol in a Wang linker. The transglutaminase substrates dipeptides (Z-Gln-Gly) and heptapeptides (Pro-Asn-Pro-Gln-Leu-Pro-Phe) were synthesized on PVA-PEG_5, PVA-PEG_20, and the Wang linker-derivatized PVA-PEG resins. The cleavage of the peptides from the resins using MeOH/NH3 mixture at different temperatures (0 degrees C and room temp) and 50% TFA/DCM provided, respectively, peptide methyl esters, amides, and acids in good yields and purity as assessed by LC-MS analysis.     

Sulfonated poly(ether ether ketone)/poly(vinylpyrrolidone) acid–base polymer blends for direct methanol fuel cell application

Acid–base polymer blends for polymer electrolyte membranes have been prepared by blending sulfonated poly(ether ether ketone) (SPEEK) with poly(vinylpyrrolidone) (PVP) to reduce methanol uptake and to decrease methanol permeability while maintaining high proton conductivity. The acid‐base interaction occurring on the sulfonic acid group and on the tertiary amide group was characterized by FTIR and DMA. As the composition of PVP lowered than 20 wt % in the blends, the acid–base interaction causes great reduction on methanol uptake and the methanol permeability; however, the proton conductivity is still high. In this work, membrane–electrode assemblies (MEAs) have been prepared for direct methanol fuel cell (DMFC) from both blend membrane and Nafion 117. DMFC single cell performance was also evaluated. Results confirmed that SPEEK (with the degree of sulfonation (DS) = 69%) blended with PVP (M_n = 1,300,000) with a ratio of 80/20 (w/w) exhibits higher open‐circuit voltages (OCV) and lower polarization loss than those of Nafion 117. These acid–base blends will be suitable for DMFC application. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 565–572, 2006     

Complex formation of daunomycin with poly(vinylpyrrolidone) and poly(ethylene glycol)

Russian Journal of General Chemistry - Complexes of the anthracycline antitumor antibiotic daunomycin with biocompatible polymer carriers, poly(vinylpyrrolidone) and poly(ethylene glycol), have...     

Prussian blue nanoparticles protected by poly(vinylpyrrolidone)

Prussian blue (PB) nanoparticles protected by poly(vinylpyrrolidone) (PVP) were prepared by mixing aqueous Fe2+, Fe(CN)63-, and PVP solutions together and were characterized by UV-vis, IR, XRPD, and TEM. Averaged dimensions of the nanoparticles were controlled between 12 and 27 nm depending on initial Fe ion concentrations and feed ratios of Fe ion to PVP. Solubility of PB bulk in organic solvents is considerably low; nevertheless, formations of the PB nanoparticles dramatically increase the solubility in a variety of organic solvents. It is noteworthy that the PVP-protected PB nanoparticles stably maintain the cluster formations without further aggregations and dissociation in CHCl3 over 1 month. Measurement of the critical temperature (Tc) where PB nanoparticles exhibit a ferromagnetic property showed a gradual decrease of Tc for the nanoparticles as the particle sizes become smaller. This result could be ascribed to the reduction of the averaged numbers of magnetic interacted neighbors.     

Synthesis of aramides in solutions of poly(vinylpyrrolidone)

Results on polycondensation of poly(1.4 benzamide) (PBA) and 2.5.DCIPDAcoTPA in solutions of poly(vinylpyrrolidone) (PVP) will be presented. For polycondensation, the method of OGATA, using triphenylphosphine and hexachloroethane, and the low-temperature solution polycondensation of dicarboxylic acid dichlorides and diamines, were applied. It is shown that the molar mass of PBA depends strongly on the PVP:PBA ratio. To explain this dependence, one has to take into account the phase behavior of the ternary rigid rod polymer/flexible coil polymer/solvent system and the influence of the matrix polymer. An enhancement of the molar mass of the PBA produced can be observed when the PVP:PBA is high enough to prevent an association of the PBA, i.e. when one stays in the isotropic one-phase area of the phase diagram. Under these circumstances, it is possible to obtain one-phase systems in nonsolvents for the aramides.     

Solubility of silybin in aqueous poly(vinylpyrrolidone) solution

Silybin is a main component in silymarin, which is an antihepatotoxic polyphenolic substance isolated from the milk thistle plant, Silybum marianum. A major problem in the development of an oral solid dosage form of this drug is the extremely poor aqueous solubility. In present work, the solubility of silybin in aqueous poly(vinylpyrrolidone) (PVP k30) solution at the temperature range from 293.15 to 313.15 K was measured by a solid–liquid equilibrium method. Experimental results reveal that the solubility of silybin increases with the increase both in PVP's concentration and temperature. With the increase in PVP's concentration, the transfer enthalpy for silybin from water to aqueous PVP solution decreases within a negative region, and the transfer entropy increases slightly first in a positive region and then decreases to a negative region. The transfer enthalpy is lower than the entropy term. A modified UNIQUAC model was used to correlate solubility data.     

Sorption and diffusion of water in poly(vinylpyrrolidone)

The effect of molecular mass, thermal prehistory, physical state, and three-dimensional chemical crosslinked structure of a polymer on dissolution and diffusion in the PVP-water system has been studied. The kinetic dependences of sorption that correspond to the Fickian or pseudonormal type have been measured. In a certain concentration range, sorption is accompanied by transition of the system to the rubbery state. In the glassy state, the negative concentration dependence of the diffusion coefficient related to the nonequilibrium state of the polymer sorbent is observed. Sorption isotherms are described by S-shaped curves. It has been shown that the thermal prehistory of the polymer sorbent has the most pronounced effect on its sorption behavior. The effect of molecular mass is insignificant, while three-dimensional chemical crosslinks in PVP manifest themselves only in the region of the rubbery state. In accordance with the double sorption model, the experimental isotherms are represented as the superposition of two isotherms described by the Langmuir and Flory-Huggins equations. For the glassy state of the polymer sorbent, the degree of the nonequilibrium state has been estimated. With due regard for the excess free volume, the detailed thermodynamic analysis of isotherms has been performed; namely, the pair interaction parameters and the free energy of mixing have been calculated. The state of water in the polymer has been examined within the framework of hydrate contributions and clusterization theory.     

Intramolecular mobility of spin labelled poly(vinylpyrrolidone) and poly(vinylcaprolactam) in solutions

The intramolecular (segmental) mobilities of poly(vinylpyrrolidone) and poly(vinylcaprolactam) in solutions have been investigated using the spin label technique. The rotational correlation times for the segments do not depend on the spin label used for their determination. The rotational correlation times and the effective segmental dimensions for poly(vinylcaprolactam) are greater than those for poly(vinylpyrrolidone), the difference being due to different dimensions of the side-groups of the macromolecules. Near the temperature of phase separation in an aqueous solution of poly(vinylcaprolactam), the hydrophobic interaction of macromolecular side-groups leads to the compression of the molecular coil. As a result, the segmental mobility diminishes, and the spatial limitations on the rotation of a spin label surrounded by bulky side-groups become more severe.     

New poly(ethylene glycol) supports for the liquid-phase synthesis of protected peptide hydrazides

The liquid-phase synthesis of protected peptide hydrazides can be suitably performed on modified poly(ethylene glycol) supports containing benzyl-, p-benzyloxybenzyl-, and tert-alkyl-oxycarbonylhydrazide anchoring groups.     

Photochemistry on soluble polymer supports: synthesis of nucleosides

[reaction: see text] A new soluble polymer support synthesis of nucleosides is described. The photochemical ring expansion of cyclobutanones in the presence of poly(ethylene glycol) (PEG) results in polymer-supported ribosides. These photoadducts can be cleaved from the polymer under Vorbrüggen coupling conditions with TMS-protected purines and pyrimidines to give ribonucleosides. The method has been extended to include modified PEGs with dendritic end-groups in order to improve the loading levels for these coupling reactions.     

Polystyrene resins cross-linked with di- or tri(ethylene glycol) dimethacrylates as supports for solid-phase peptide synthesis

Polystyrene resins cross-linked with di(ethylene glycol) dimethacrylate (DEGDMA) and tri(ethylene glycol) dimethacrylate (TEGDMA), DEGDMA-PS and TEGDMA-PS, were synthesized by suspension copolymerization. Four functionalized resins, chloromethyl resin, 4-hydroxymethylphenoxymethyl resin (Wang resin), 4-methylbenzhydrylamine resin (MBHA resin) and 2-chlorotrityl chloride resin, were prepared from DEGDMA-PS and TEGDMA-PS. DEGDMA-PS and TEGDMA-PS showed high reactivity in the functionalization reactions in comparison with Merrifield resin (polystyrene cross-linked with divinylbenzene, DVB-PS). DEGDMA-PS-Wang resin and TEGDMA-PS-Wang resin were used as the solid-phase support for the synthesis of a difficult sequence, the fragment of acyl carrier protein 65-74. The yields of the crude peptide synthesized using DEGDMA-PS-Wang resin, TEGDMA-PS-Wang resin and DVB-PS-Wang resin were 92.3%, 91.6% and 78.8%, respectively. The purities of the crude peptides were 85.7%, 88.1% and 73.3%, respectively.     

聚甲基苯基乙烯基硅氧烷固相微萃取探头的特性

用溶胶－凝胶及自由基引发交联方法，成功地制备了聚甲基苯基乙烯基聚硅氧烷和羟基硅油复合涂层的固相微萃取探头，与进口商用探头比较，研制的探头对芳香化合物具有高的萃取能力和热稳定性（350℃）以及长的使用寿命。