A biacylhydrazone-based chemosensor for fluorescence ‘turn-on’ detection of Al3+ with high selectivity and sensitivity

A simple Al³⁺ fluorescent chemosensor (1) based on diacylhydrazone has been designed and synthesized by the condensation reaction of 2-hydroxy naphthaldehyde and metaphthalic hydrazide. The chemosensor 1 displays a specific and sensitive response to Al³⁺ over other cations in DMSO solution. Upon the addition of DMSO solution of Al³⁺, the sensor 1 shows an immediate fluorescence ‘turn-on’ response and emitting strong blue emission with visible color change from colorless to green. The fluorescence quantum yield enhanced from 7.24% to 48.68%. Meanwhile, the fluorescence and UV absorption spectra detection limits of the chemosensor 1 for Al³⁺ were 2.0 × 10^?7 M and 5.6 × 10^?7 M respectively, indicating the high sensitivity of 1 to Al³⁺. Furthermore, test strips based on 1 were fabricated, which could be used as a convenient test kit for the detection of Al³⁺ and an efficient Al³⁺ controlled fluorescent security display materials.     

A simple colorimetric chemosensor for relay detection of Cu2+ and S2− in aqueous solution

A simple colorimetric chemosensor 1 was developed for the sequential detection of Cu²⁺ and S^2?. Sensor 1 could rapidly detect Cu²⁺ by an obvious color change from colorless to yellow. The binding mode of 1 to Cu²⁺ was determined to be a 1:1 complexation stoichiometry through Job plot and ESI-mass spectrometry analyses. The sensing mechanism of Cu²⁺ by 1 was proposed by theoretical calculations. Importantly, the detection limit for Cu²⁺ was found to be 0.12 μM, which was much lower than the recommended value (31.5 μM) of the World Health Organization (WHO). Additionally, 1 could detect and quantify Cu²⁺ in real water samples. Moreover, the resulting 1-Cu²⁺ complex could be used as a highly selective colorimetric sensor for S^2? in the presence of various anions without any interference. The detection limit for S^2? was determined to be 1.66 μM, which was much lower than the guideline (14.8 μM) recommended by WHO in fresh water.     

Coumarin-based fluorescent chemosensor for the selective quantification of Zn2+ and AcO− in an aqueous solution and living cells

In this work, we report a novel fluorescence chemosensor HM based on the coumarin fluorophore for the quantification of Zn²⁺ and AcO^?. HM specifically binds to Zn²⁺ in the presence of other competing cations, and evident changes in UV–vis and fluorescence spectra in HEPES buffer are noticed. The in situ generated HM-Zn²⁺ complex solution exhibit a high selectivity toward AcO^? via Zn²⁺ displacement approach. The detection limits of HM for Zn²⁺ and HM-Zn²⁺ for AcO^? were estimated to be 7.24 × 10^?8 M and 9.41 × 10^?8 M, respectively. HM and the resultant complex HM-Zn²⁺ exhibit low cytotoxicity and cell-membrane permeability, which makes them capable of Zn²⁺ and AcO^? imaging in living Hep G2 cells. A B3LYP/6-31G(d,p) basis set was employed for optimization of HM and HM-Zn²⁺ complex.     

A highly selective fluorescent chemosensor for successive detection of Fe3+ and CN− in pure water

A water-soluble fluorescent chemosensor (D) based on 1, 8-naphthalimide derivative has been designed and synthesised as a new fluorescent sensor for successive detection of Fe³⁺ and CN^?. Fluorescence measurements show that chemosensor D has excellent fluorescent-specific selectivity and high sensitivity for Fe³⁺ over many other metal ions in pure water. Moreover, the complex of D and Fe³⁺ (D–Fe³⁺) displayed high sensitivity for CN^? over many other anions in the same medium. Even more important, the recognition of the sensor D for Fe³⁺ and D–Fe³⁺ complex for CN^- could be used successfully in pure water. The test strips based on D and D–Fe³⁺ exhibited good selectivity to Fe³⁺ and CN,^- respectively, we believe the test strips could serve as convenient and efficient Fe³⁺ and CN^? test kits.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.     

Single sensor for multiple analytes: fluorogenic detection of Al3+ in aqueous media and AcO− in organic media

A simple novel receptor, designed to have a combination of both oxygen and nitrogen-binding sites for metal ion and hydrogen bond donor sites for anion, was synthesised. The receptor has been explored for the selective detection of cation Al³⁺ over the other interfering metal ions and anion AcO^?  against a range of physiologically relevant anions in the fluorescence spectroscopy. The receptor shows a different response to aluminium and acetate in the emission spectra. The binding isotherm and detection limit demonstrate that the receptor is an excellent fluorometric probe for Al³⁺ and AcO^? .     

A novel colorimetric and “turn-on” fluorescent sensor for selective detection of Cu2+

In this work, a new highly selective and sensitive fluorescent sensor for detecting Cu²⁺ was developed based on rhodamine fluorophore. It displayed strong fluorescence “turn-on” effect upon addition of Cu²⁺, and possessed the function of naked eye recognition. The fluorescence enhancement also enabled the sensor to quantitatively analyze Cu²⁺ due to the formation of a stable 1:1 metal–ligand complex in a short time, and the complex possesses relatively good pH stability. In addition, the density functional theory calculations were adopted to investigate the molecular orbitals as well as the spatial structure. Simultaneously, the cell imaging and zebra fish experiments provided a broader application prospect in biological system.     

Synthesis of a new β-naphthothiazole monomethine cyanine dye for the detection of DNA in aqueous solution

Novel monomethine cyanine dye (MC) derived from β-naphthothiazole and benzothiazole has been prepared and characterized by ¹H and ¹³C NMR, FTIR, ESIMS, elemental analyses, absorption and fluorescence spectroscopy. The dye was conveniently synthesized by the condensation of two sulfate heterocyclic quaternary salts. The interaction between calf thymus DNA (ct-DNA) in tris(hydroxymethyl)aminomethane–HCl (Tris–HCl) aqueous buffer solution and MC has been studied with spectral fluorescence method. The binding constant value has been determined by fluorescence titration of MC with ct-DNA concentrations. The result obtained is consistent with an intercalative binding interaction between MC and ct-DNA. Compared with ethidium bromide (EB), MC showed a huge fluorescence enhancement upon mixing with ct-DNA.     

A highly sensitive DNA-AIEgen-based “turn-on” fluorescence chemosensor for amplification analysis of Hg~(2+) ions in real samples and living cells

Functional nucleic acids(FNAs)-based biosensors have shown great potential in heavy metal ions detection due to their low-cost and easy to operate merits. However, in most FNAs based fluorescence probes, the ingenious designs of double-labeled(fluorophore and quencher group) DNA sequence, not only bring the annoyance of organic synthesis, but also restrict its use as a robust biosensor in practical duties. In this paper, we design a simple AIEgens functional nucleic acids(AFNAs) probe which consists of only fluorogen but no quencher group. With the help of duplex-specific nuclease(DSN) enzyme based target recycling, high fluorescence signal and superior sensitivity towards Hg~(2+) are achieved. This robust assay allows for sensitive and selective detection of Hg~(2+) in real water samples and mapping of intracellular Hg~(2+), without double-labeling of oligonucleotide with a dye-quencher pair, nor the multiple assay steps.     

A novel naphthalimide–glutathione chemosensor for fluorescent detection of Fe3+ and Hg2+ in aqueous medium and its application

By rationally introducing glutathione functionalized 1, 8–naphthalimide, a novel fluorescent chemosensor (NG) was successfully synthesized. NG can high selectively and sensitively recognize Fe³⁺/Hg²⁺ ions through quenching of fluorescence among all kinds of common metal ions in aqueous medium. The binding stoichiometry ratio of NG–Fe³⁺ is verified as 2:1and NG–Hg²⁺ as 1:2 confirmed by Job's plot method, FT-IR, ¹H NMR and ESI–MS spectrum, and the possible sensing mechanism were also proposed. The chemosensor NG toward Fe³⁺ and Hg²⁺ displays the excellent advantages of high selectivity and sensitivity, low detection limits (7.92?×?10^?8 and 4.22?×?10^?8?M), high association constants (3.37?×?10⁸ and 8.14?×?10⁴?M^?2), instataneous response (about 10s) and wide pH response range (3.0–8.0). Importantly, the chemosensor NG was successfully applied to determine Hg²⁺ in tap water. Meanwhile, the test strips based on NG were prepared, which could conveniently and efficiently detect Fe³⁺ and Hg²⁺. Moreover, the complex of NG and Fe³⁺ (NG–Fe³⁺) showed high selectivity and sensitivity for H₂PO₄￣ over many other anions in the same medium.     

Benzothiazole-based heterodipodal chemosensor for Cu2+ and CN– ions in aqueous media

A simple and selective chemosensor, A, was developed for recognizing Cu²⁺. The emission spectra of receptor A showed a fluorescence quenching response upon addition of Cu²⁺ with a low detection limit of 4.51 nM, significantly less than the WHO recommended guideline for drinking water. In addition, the formed A?Cu²⁺ complex was examined for secondary sensing of anions. The A?Cu²⁺ complex showed selectivity for CN^– via a recovering emission profile of A.     

A highly sensitive DNA-AIEgen-based “turn-on” fluorescence chemosensor for amplification analysis of Hg<Superscript>2+</Superscript> ions in real samples and living cells

Functional nucleic acids (FNAs)-based biosensors have shown great potential in heavy metal ions detection due to their low-cost and easy to operate merits. However, in most FNAs based fluorescence probes, the ingenious designs of double-labeled (fluorophore and quencher group) DNA sequence, not only bring the annoyance of organic synthesis, but also restrict its use as a robust biosensor in practical duties. In this paper, we design a simple AIEgens functional nucleic acids (AFNAs) probe which consists of only fluorogen but no quencher group. With the help of duplex-specific nuclease (DSN) enzyme based target recycling, high fluorescence signal and superior sensitivity towards Hg²⁺ are achieved. This robust assay allows for sensitive and selective detection of Hg²⁺ in real water samples and mapping of intracellular Hg²⁺, without double-labeling of oligonucleotide with a dye-quencher pair, nor the multiple assay steps.     

A new coumarin-based fluorescent probe for selective recognition of Cu2+ and S2− in aqueous solution and living cells

A new coumarin-based fluorescent probe CMOH was easily synthesized for detection of Cu²⁺ and S²⁻ in aqueous media and living cells. CMOH displayed high sensitivity (detection limit = 3.2 nM) and selectivity to Cu²⁺ with a non-fluorescence complex CMOH-Cu²⁺ formation via a 1:1 binding mode. According to displacement approach, the fluorescence of CMOH-Cu²⁺ was recovered in the presence of S²⁻ and acted as a sensitive sensor with a low detection limit of 11.4 nM. This ‘‘on-off-on’’ process can be accomplished within 1 min and repeated at least 5 times. What's more, CMOH exhibited good permeability, low cytotoxicity and can be used as a suitable tool to detect changes of Cu²⁺ and S²⁻ in biosystem.     

A reversible fluorescence “ON–OFF–ON” sensor for sequential detection of F− and Cu2+ ions and its application as a molecular-scale logic device and security keypad lock

A new azoimine receptor, R₁, was synthesized by Schiff base condensation of 4-(4-butylphenyl) azophenol and 2,6-diaminopyridine and acts as a colorimetric and fluorometric chemosensor for F^? and also toward Cu²⁺ ions in aqueous environment. UV–Vis absorption and fluorescent emission spectra were employed to study the sensing process. Emission study was performed to examine the dual sensing ability of the obtained probe with sequential addition of F^? followed by Cu²⁺ and vice versa. The receptor is an efficient “ON–OFF” fluorescent probe for the fluoride ion. Also, R₁ + F^? operated as an “OFF–ON” fluorescent sensor for Cu²⁺ ions. Considering emission intensity and absorption wavelength for F^? and Cu²⁺ ions, a molecular system was developed with the ability to mimic the functions of XNOR logic gating on the molecular level. In addition, R₁ behaved as a molecular security keypad lock with F^? and Cu²⁺ inputs. The keypad lock operation is particularly important, as the output of the system depends not only on the proper combination but also on the order of input signals, creating the correct password that can be used to “open” this molecular keypad lock through strong fluorescence emission at 460?nm.     

CdTe quantum dots as fluorescence sensor for the determination of vitamin B6 in aqueous solution

A novel, rapid and simple CdTe quantum dots （QDs） based technology platform was established for selective and sensitive determination of vitamin B6 in aqueous solution. It can perform accurate and reproducible quantification of vitamin B6 in pharmaceutical with satisfactory results.     

Synergistic enhancement of the fluorescence intensity of 4,5-benzopiaselenol by surfactants and β-cyclodextrin in aqueous solution

The synergistic enhancement of the fluorescence intensity of 4,5-benzopiaselenol (I _F ^Se-DAN ) by surfactants (Sf) and -cyclodextrin (-CD) has been studied. The (I _F ^Se-DAN ) in sodium dodecyl sulfate (SDS)//gb-CD was approximately 30 times greater than that in water, and 5–6 times greater than that in either SDS or -CD solutions alone, and a blue-shift of the emission wavelength was observed.¹H-NMR experiments and determination of CMC values of Se-DAN/-CD, Se-DAN/SDS, and Se-DAN/SDS/-CD systems reveal that the synergistic fluorescence enhancement was produced by the SDS monomer/-CD inclusion complex. In essence, the synergistic enhancement is due to the altered microenvironment experienced by Se-DAN upon its transfer from water to the hydrophobic cavity upon complexation.     

A novel turn-on fluorometric “reporter-spacer-receptor” chemosensor based on calix[4]arene scaffold for detection of cyanate anion

Herein, a novel calix[4]arene compound, which was modified by the 2-(2-aminophenyl)benzothiazole fragment with cyanate recognition function was designed based on the reporter-spacer-receptor sensing system. The construction was done via two-step reaction, and the desired sensor 4 was characterized by FT-IR, ¹H-, ¹³C-NMR, and fluorescence spectroscopy along with HRMS data. The sensor candidate showed distinct fluorometric cyanate detection by means of reporter feature of selected benzothiazole constituent. In the presence of cyanate, the sensor gave a turn-on-type fluorescence at 482 nm with a large stokes' shift. Furthermore, it was observed that our fluoroionophore 4 is highly selective toward cyanate over remaining anions such as sulfate, phosphate, fluoride, chloride, bromide, iodide, chlorate, and nitrate in 10% aqueous solution of DMSO. The 1:2 stoichiometric ratio of the 4 -cyanate complex was given the best fit with Job's plot based on the titration data. The association constant (K_a) of sensor 4 with cyanate is determined to be 1.64 × 10⁵ M⁻². The obtained limit of detection (LOD) value for cyanate anion, 312 nM, clearly revealed the remarkable sensitivity of the chemosensor 4 . This supramolecular method provides a highly adaptive technique for the detection of cyanate and so cyanide ions by current international standard methods.