羰基铁粉/银核-壳粒子及其复合材料的制备与电磁特性

运用液相化学还原银技术, 制备了羰基铁粉/银核-壳复合粒子; 以该复合粒子为屏蔽填料, 制备了一种宽频、高效的新型电磁屏蔽橡胶材料. 分析了该屏蔽填料的表面形貌和组成, 研究了其电磁特性对电磁屏蔽橡胶材料屏蔽效能的影响规律. 结果表明, 具有完整核壳结构的羰基铁粉/银复合粒子兼具优异的磁性能和高导电率, 用其组成的电磁屏蔽橡胶材料对电磁波能同时产生较强的吸收损耗和反射损耗, 屏蔽效能(SE)优于传统的屏蔽橡胶材料.     

氧化石墨烯/超细银粒子复合物的制备及其光电性能

超细银粉在太阳能电池正面电极领域有广阔的应用前景,其粒径分布、分散性、表面态与其性能息息相关。 本文通过在液相还原法合成超细银粉的后期引入氧化石墨烯(GO),利用溶液状态下二者相对活性的表面的相互作用获得了性能优良的银粉。 通过X射线衍射(XRD)、拉曼光谱(Raman)和扫描电子显微镜(SEM)等手段对所得复合超细银粉进行结构及形貌表征,结果显示该法获得的银粉分散性较好、尺寸分布较窄。 进而,利用紫外-可见光谱探讨了GO与银粒子之间的相互作用。 而且研究发现:固定硝酸银溶液的浓度,随着GO含量的增加,银粉的导电性能先升高后降低,当GO的质量分数为2.5%时,导电性能更好。 这为超细银粉在实际中的应用提供重要数据和有益参考。     

Annealing Behavior of Silica Gel Powders Modified with Silver Crystalline Aggregates

The annealing behaviour of silica powders added with silver, prepared by the sol-gel method, was studied using X-ray diffraction. Partial crystallization of amorphous SiO₂ samples as low as 600°C has been observed. For that, silver needed to be added to the precursor solution in such a way that it formed aggregates. Silica xerogel samples were prepared using a molar ratio ethanol/H₂O/TEOS of 4:11.6:1 and loaded with silver in three different ways: in the form of silver nitrate, silver chloride, or chemically synthesised silver fine particles. The microstructure of the silica xerogel powders was studied as a function of annealing temperature. Attention was paid to the evolution of the glass matrix as well as the silver aggregates in the SiO₂ matrix. Partial crystallization of the glass matrix was achieved at temperatures much lower than those specified by the phase diagram, independently of preparation method of the silver aggregates.     

Synthesis and applications of silver nanoparticles

Over the past few decades, nanoparticles of noble metals such as silver exhibited significantly distinct physical, chemical and biological properties from their bulk counterparts. Nano-size particles of less than 100 nm in diameter are currently attracting increasing attention for the wide range of new applications in various fields of industry. Such powders can exhibit properties that differ substantially from those of bulk materials, as a result of small particle dimension, high surface area, quantum confinement and other effects. Most of the unique properties of nanoparticles require not only the particles to be of nano-sized, but also the particles be dispersed without agglomeration. Discoveries in the past decade have clearly demonstrated that the electromagnetic, optical and catalytic properties of silver nanoparticles are strongly influenced by shape, size and size distribution, which are often varied by varying the synthetic methods, reducing agents and stabilizers. Accordingly, this review presents different methods of preparation silver nanoparticles and application of these nanoparticles in different fields.     

The effect of cobalt addition on sintering and microstructural behaviour of silver–tungsten (Ag–W) composite

The present investigation has been revealed that homogeneous silver-tungsten (Ag–W) composite powders doped with cobalt as sinter aid can be produced by the two-stage reduction of co-precipitated tungstate. The sintering of the powders has been studied using dilatometry and the results showed that the critical level for activated sintering is of the order of 0.3 mass percent cobalt with respect to the tungsten content of the compact powder. This critical level is equivalent to approximately six to seven atomic layer coverage of the tungsten particles by cobalt. The levels of cobalt addition above the critical amount leads to the formation of cobalt tungsten (CoW₃) intermetallic compound precipitates, which become trapped within the silver phase in the sintered composite material. Microstructural evaluation of sintered specimens has been carried out using optical and electron microscopy. Transmission electron microscopy results revealed the neck formation between adjacent tungsten particles along with the presence of silver around the tungsten particles. Energy dispersive X-ray (EDX) analysis also confirmed that amounts of cobalt was 0.3 mass percent, in the region containing the silver at the tungsten particle interface which agreed with the level of activated sintering.     

Silver-particle-based surface-enhanced Raman scattering spectroscopy for biomolecular sensing and recognition

In this study, we demonstrate that 2-microm-sized Ag (microAg) powders can be used as a core material for constructing molecular sensing/recognition units operating via surface-enhanced Raman scattering (SERS). This is possible because microAg powders are very efficient substrates for both the infrared and Raman-spectroscopic characterization of molecular adsorbates prepared in a similar manner on silver surfaces; we can obtain an infrared spectrum of organic molecules adsorbed on microAg particles with a very high signal-to-noise ratio by diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), and the Raman spectrum of organic monolayers on powdered silver is an SERS spectrum. The agglomeration of microAg particles in a highly concentrated buffer solution could be prevented by the layer-by-layer deposition of cationic and anionic polyelectrolytes such as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA). In fact, prior to depositing PAA and PAH, 4-aminobenzenethiol (4-ABT) was assembled on the surfaces of the microAg particles as SERS markers. Because of the presence of amine groups of 4-ABT, PAA could be readily deposited on the microAg particles. On the other hand, the outermost PAA layer could also be derivatized with biotin-derivatized poly(L-lysine). The nonspecific interaction of poly(L-lysine) with proteins could be suppressed by grafting poly(ethylene glycol) into the biotin-derivatized poly(L-lysine) molecules. On the basis of the nature of the SERS peaks of 4-ABT, it was confirmed that these biotinylated microAg powders were effective in selectively recognizing the streptavidin arrays. Because a number of different molecules can be used as SERS-marker molecules, such as probable 4-ABT, commercially available microAg powders must be a prospective material in molecular sensing/recognition, particularly via SERS.     

Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu@Ag) core-shell powders.     

Structural and catalytic properties of ultra-dispersed silver powders prepared by metal evaporation with high-power electron beam. 1. Structural properties

Summary Structural properties of ultra-dispersed silver powders synthesized via high-temperature electron-beam evaporation of silver in different gases (Ar, N₂, He) were studied with XRD, TEM, EDX and XRF. The formation of specific oxide-like species on the particle surface of an Ag(Ar) powder was found. It was shown that these particles can contain argon atoms.     

Soft chemistry synthesis and properties of silver orthophosphate powders

Silver orthophosphate powders with superior quality used in phosphorus-doped conductive pastes for solar cell metallization were obtained by precipitation from phosphate precursors. The powders were investigated by X-ray diffraction, scanning electron microscopy coupled with energy dispersive spectrometry, Fourier-transform infrared spectroscopy, thermal analysis, and diffuse reflectance spectroscopy. Spherical silver orthophosphate particles with a size of 0.8 to 10 μm were obtained by chemical precipitation, and the compound crystallized in a cubic symmetry. Relatively smaller crystallites were obtained from disodium hydrogen phosphate. The optical gap determined from the diffuse reflectance spectra using the Kubelka-Munk function varied between 2.05 and 2.30 eV. The electrical conductivity is characteristic of a semiconducting behaviour with activation energy of 0.20 eV. To improve the metal-semiconductor interface, the uniformity of powders of the deposited paste must be enhanced.     

Preparation of Disperse Silver Particles by Chemical Reduction

Mastery over the microscopic shape and size of a nanoparticle enables accurate control of its properties for some strict application. The mechanism of shape-controlled synthesis was discussed by investigating the formation of silver nanospheres prepared by chemical reduction method using Ag(NH₃)₂⁺ as metal source, ascorbic acid as reducing agent and polyvinylpyrrolidone (K-30) as dispersant. The effects of temperature, PVP/AgNO₃ mass ratio, pH value and the interaction between PVP and silver on the shape and particle size were studied by XRD and SEM. The results show that the morphology of silver particles could transform from branched to spherical and the particle size gradually decrease with the increase of PVP/AgNO₃ mass ratio. The particles size can also be significantly influenced by pH value and temperature. The key point for preparing high dispersity spherical silver powder is that the growth rate of each plane of the particle must be uniform and synchronous. Silver powders with spherical particles with mean size of 0.2 μm were synthesized under the optimum conditions (PVP/AgNO₃ mass ratio 0.6, pH 7, reaction temperature of 40°C).     

基于原位体积加成制备导电线路的研究

本文提出一种制备导电电路的方法。以纳米铜为导电填料，以光固化树脂为连接剂，制备含铜光固化油墨，利用丝网印刷方法获得含有纳米铜的图案，利用铜与银盐间的置换反应，将铜纳米粒子图案通过原位体积加成转化为导电银图案。研究结果表明，铜图案不具有导电性，而置换反应生成的银图案具有导电性，且导电能力受铜含量、银盐浓度、光照时间、浸泡反应时间等因素影响，本实验中获得的最高电导率为1.25×10⁵ S/m，导电线路具有良好的耐弯曲、耐疲劳性能，同时兼具优异的可修复性能，为导电线路的制备提供了常温下简单有效、成本低廉的实现方法，具有重要的参考价值。     

Preparation of silver nanocrystals in microemulsion by the γ-radiation method

Silver colloids of well-defined shape, size were synthesized by γ-ray irradiating silver salt in reversed microemulsions, and then pure silver dry powders were obtained. The sols were studied by absorption spectroscopy, and the silver powders were characterized by Transmission Electron Micrographs (TEM) and X-ray Diffraction (XRD). The effect of radiation dose and aging time was discussed.     

在线性或交联的聚氨酯粒子内原位还原制备纳米银粒子

纳米金属粒子有特异性质 ,可用作高效催化剂、非线性光学材料等 .为防止其聚集 ,不少研究者采用表面活性剂 [1]、配位体 [2 ]和高分子等以阻止纳米金属粒子的聚集 .近年来高分子金属复合纳米粒子引起人们广泛的兴趣 [3～ 9] .文献上大多采用线性或嵌段双亲高分子作纳米金属的分散稳定剂[6 ] 或在高分子粒子表面沉积纳米金属粒子[5] ,也有人采用多孔交联高分子微球的孔洞作为微反应器形成纳米金属粒子[7] .这些方法均不能有效地控制金属粒子的粒径 ,特别难以合成粒径小于 3 0 nm的银粒子 .本文首次报道了在常温处于粘弹态 ,线性或交联的高分…     

Morphologic characteristics of bismuth and silver particles formed upon the reduction of metal stearates with benzyl alcohol

The products of the reduction of individual and mixed bismuth oxohydroxostearate and silver stearate with benzyl alcohol are studied by electron microscopy and X-ray powder diffraction. The reduction of mixed bismuth and silver carboxylates with benzyl alcohol is a promising route to both individual submicronzised bismuth and silver metal powders and to their alloys.     

Preparation and Antibacterial Effect of Bamboo Charcoal/Ag on Staphylococcus Aureus and Pseudomonas Aeruginosa

Bamboo charcoal supporting silver (BC/Ag) was prepared by activation and chemical reduction. The BC/Ag composites were characterized by silver particle size and distribution, silver ion (Ag⁺) release and antibacterial properties. Scanning and transmission electron microscopy (SEM and TEM) showed that the Ag particles were distributed uniformly on the BC matrix. The Ag particle size was found to be less than 150 nm based on TEM. The Ag⁺ release increased initially which was followed by a marginal increase between the 8th and 24th hour. Composites contained higher amounts of silver exhibited a further rise in Ag⁺ release from the 24‐hours of storage in water. The antibacterial effects of the BC/Ag composite powders against Pseudomonas aeruginosa and Staphylococcus aureus were assessed from the minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) method, and an excellent antibacterial performance was discovered.     

Thermal conductivity of polyurethane composites containing nanometer- and micrometer-sized silver particles

Polyurethane composites containing spherical and flake-shaped silver fillers of micrometer and nanometer sizes were prepared by reacting suspensions of the silver filler in tetraethylene glycol with Desmodur^? HL BA. Both the thermal conductivity and the stability of the silver composites are increased in comparison with a reference polyurethane sample without filler. Unexpectedly, the largest increases in thermal conductivity and stability are observed for the spherical silver particles of micrometer size but not for the silver nanoparticles, which is reasoned with larger aggregates of silver particles and a higher degree of crystallinity in the sample containing micrometer-sized silver particles.     

The Interaction of Oxygen with Silver Powders. A Comparison Between Esca Results and Volumetric Measurement

Interactions of oxygen with silver powders have been studied with a combination of angle-resolved ESCA and volumetric adsorption. Three states of adsorbed oxygen, i.e., atomically adsorbed oxygen, dissolved oxygen, and surface oxide, are characterized by 0(1s)-ESCA peaks at binding energies of 530.2, 532.0, and 529.3 eV respectivcly. The ESCA studies also suggest that atomically adsorbed oxygen dissolves into the subsurface of silver powders at temperatures above 100 °C, and then transforms into oxide (Ag₂O) at 175 °C. Adsorbed oxygen on the silver powders was partially desorbed at temperatures higher than 180 °C. The transformation and desorption information obtained from ESCA satisfactorily explains the variation of the adsorption isotherm with temperature obtained from the volumetric adsorption of oxygen on Ag/SiO₂ catalysts.     

影响一步摄影正象色调与银颗粒大小的几个因素

用透射电子显微镜观察一步摄影正片(明胶介质)的银颗粒,对影响银颗粒大小的因素进行了研究。卤化银负片乳剂中的碘含量,明显地影响卤化银颗粒大小和转印后银颗粒的大小,随着卤化银乳剂中的碘含量减少,卤化银颗粒和银质点簇(即银颗粒)变大,组成银质点簇的银质点数目增多,正象色调由棕向黑转移。不同物理显影核亦显著影响正片银颗粒大小与其色调。     

Evaluation of food-processing conditions of various particle sizes of <Emphasis Type="Italic">Tremella fuciformis</Emphasis> powder via DSC and TG analyses

Tremella fuciformis (Berk.), also known as silver ear, has a high economic value due to being a valuable edible and medicinal mushroom. The focus of this study was on the various particle sizes of 80–300 mesh (particle diameters from 2 mm to 250 μm) for freeze-drying silver ear powder in order to determine the water-holding capacity, viscosity, and crude polysaccharide content of various particle sizes. Our aim was to determine the possible conditions for silver ear powder for food processing under the conditions of oxidation/non-oxidation and heat treatment. Overall, we obtained various particle sizes of silver ear powder, the water-holding capacity decreased from 21.84 to 14.82 g g^?1, the viscosity increased from 8.53 to 71.20 cP, and the content of crude polysaccharides, which remained almost constant, was approximately 300 mg g^?1. In addition, the smaller the particle size of silver ear powder, the greater the thermal stability of the particles by differential scanning calorimetry (DSC) and thermogravimetric (TG) tests. The results for various particle sizes of silver ear powder in food processing are never more than ca. 240 °C by DSC tests. Moreover, comparing the results of thermal decomposition using TG analyzer under nitrogen and air conditions, in nitrogen, the various particle sizes have better preservation for storage conditions and the smaller particle size powders retained good thermal decomposition characteristics.     

同轴静电纺丝法在纳米中空TiO2纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶/钛酸四正丁酯和PVP溶胶/银颗粒为前驱体, 以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维. 将双组分纤维在200 ℃下热处理去除乙醇与表面吸附水后, 继而在空气气氛中焙烧至600 ℃, 可以得到在内表面上沉积银颗粒的TiO2纳米管, 银颗粒的直径为5-40 nm, TiO2纳米管的外径150-300 nm, 管臂厚10-20 nm. 用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征. 中空纤维的直径和管壁可以通过改变电纺参数来调节. 与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较, Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.