Simultaneous determination of chromium, selenium, and molybdenum in nutritional products by inductively coupled plasma/mass spectrometry: single-laboratory validation

An inductively coupled plasma/MS method was developed for the simultaneous determination of Cr, Se, and Mo in infant formulas and other nutritional products. All samples were digested using a closed vessel microwave oven system, together with Ni and Te internal standards. The practical quantitation limits for Cr, Se, and Mo were 0.4, 0.2, and 0.4 ng/mL, respectively; dilution factors were 250 for powders and 50 for liquids. The Cr, Se, and Mo concentrations in 10 nutritional products were within specification limits, and within-day and day-to-day (6 independent days) precision values were <5% RSD. For two control samples, the observed precision was < or = 2% RSD over 10 independent days. In three National Institute of Standards and Technology standard reference materials, Cr, Se, and Mo results were within the certified limits. The average sample spike recoveries for 10 nutritional products ranged from 93 to 107%. Robustness studies showed a minimal effect from concomitant easily ionized element concentrations. However, the choice of internal standard and matrix matching carbon content were critical to obtaining accurate Se results. All indications are that this method would be a suitable candidate as a global reference method for the determination of these trace elements in nutritional products.     

Determination of total iodine in infant formula and nutritional products by inductively coupled plasma/mass spectrometry: single-laboratory validation

A single-laboratory validation by inductively coupled plasma-mass spectrometry was developed for the determination total iodine (m/z 127) in infant formula and adult nutritional products. All samples were digested in nitric acid using a closed vessel microwave oven system; Te (m/z 130) was used as an internal standard. To prevent loss of iodine, ammonium hydroxide solution was added to the samples immediately after digestion. The method quantitation limit for total iodine was 0.3 ng/mL, but a practical LOQ was used at 1.0 ng/mL, a concentration at which there was a negligible bias due to nonlinearity. The total iodine concentrations (112-1900 ng/g) in 14 out of 15 nutritional products were within specification limits. Within-day and day-to-day (6 independent days) precision values were < 10% RSD. The observed precision for the overall mean (18 independent days) of a control sample was approximately 4% RSD. In two National Institute of Standards and Technology standard reference materials, total iodine results were within certified limits. Sample spike recoveries for all 15 nutritional products were 92-105%. The data show that a conventional microwave oven digestion procedure can be used to prepare samples for iodine determination. Therefore, this technique is very compatible with other methods being proposed as modern official methods for the analysis of minerals in nutritional products.     

Application of ultra-high-performance liquid chromatography/tandem mass spectrometry for the measurement of vitamin D in infant formula and adult/pediatric nutritional formula: First Action 2011.11

In an effort to measure vitamin D, ultra-high-performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS) was applied to samples. The use of UHPLC-MS/MS decreased the run time by 50%. The UHPLC-MS/MS achieved equal or better separation efficiency with complex food matrixes compared to HPLC-MS/MS. It was also observed that under the optimized conditions of UHPLC, all previtamins of vitamin D3, D2, and isotope-labeled vitamin D3 were baseline-separated from their corresponding vitamins. The sterol isomers found in complex food matrixes that interfere in the analysis were well separated from the analytes. The accuracy of the method was evaluated by analyzing National Institute of Standards and Technology Standard Reference Material 1849 infant reference material. The average vitamin D3 concentration was 0.251 +/- 0.012 microg/g. This showed excellent agreement with the certified value of 0.251 +/- 0.027 microg/g. The spike recovery study of a commercial infant formula matrix showed a range of recovery from 100 to 108%. The LOQ values determined were 0.0022 and 0.0028 microg/g for vitamins D3 and D2, respectively; LOD values were 0.00065 and 0.00083 microg/g for vitamins D3 and D2, respectively.     

Determination of copper, molybdenum and selenium in biological reference materials by inductively coupled plasma mass spectrometry

Summary In a contribution to the elemental characterization of 10 new reference materials, Bovine Muscle Powder (136), Corn Starch (162), Hard Red Spring Wheat Flour (165), Soft Winter Wheat Flour (166), Whole Milk Powder (183), Wheat Gluten (184), Corn Bran (186), Durum Wheat Flour (187), Whole Egg Powder (188) and Microcrystalline Cellulose (189), the total concentrations of Cu, Mo and Se were determined by the application of an analytical method based on isotope dilution inductively coupled plasma mass spectrometry. Cu and Mo contents were quantified by measurement of ⁶⁵Cu/⁶³Cu and ⁹⁷Mo/¹⁰⁰Mo isotopic ratios following spiking with ⁶⁵Cu and ⁹⁷Mo and digestion with nitric acid. Selenium was separated as hydrogen selenide from the matrix using sodium borohydride after spiking with ⁸²Se and acid digestion-dry ashing and quantified by measurement of the ⁸²Se/⁷⁸Se isotopic ratio. Comparison of these results with those from a variety of other methods and assessment of the procedures using certified reference materials indicated that the determinations of Cu, Mo and Se were performed without analytical bias.     

HILIC-MS/MS method for the quantitation of nucleotides in infant formula and adult nutritional formula: First Action 2011.21

Official Method 2011.21 is for the quantitation of the following nucleotides: adenosine 5'-monophosphate (AMP), guanosine 5'-monophosphate (GMP), uridine 5'-monophosphate (UMP), cytidine 5'-monophosphate (CMP), and inosine 5'-monophosphate (IMP) in infant formula and adult/pediatric nutritional formula. It uses hydrophilic interaction liquid chromatography with tandem mass spectrometry (HILIC-MS/MS). Preparation of the internal standards was conducted using centrifugal ultrafiltration and the standards are AMP- (13)C10, (15)N5; GMP-(13)C10, (15)N5; UMP-(13)C9, (15)N2; and15 CMP- (13)C9, (15)N3. Data were collected by using multiple reaction monitoring of the product ions of protonated molecules of the five nucleotides generated by positive-electrospray ionization. The HILIC conditions were conducted with ammonium formate (30 mmol/L) in water (pH 2.5, adjusted with formic acid) and methanol. The LOD and LOQ of the standard solution were 0.005-0.01 and 0.01-0.03 microg/mL, respectively. Recovery data were collected for intraday and interday testing and ranged from 98.1 to 108.9% with an RSD of 0.7-5.4%. The analytical range of the method is between 0.04 to 5 microg/mL for standard solution.     

电感耦合等离子体质谱(ICP-MS)法测定土壤中的有效钼

准确快速测定土壤中的有效钼,是评价土壤肥力的重要指标,对指导作物生产有重大意义。本文采用草酸-草酸铵溶液浸提土壤样品,待测浸提液稀释5倍后通过电感耦合等离子体质谱法在氦气模式下测定土壤中有效钼的含量,建立了土壤中有效钼高灵敏度分析的检测方法。选择103Rh为内标元素,校正仪器在测定过程中引起的信号飘移。对两种前处理方式进行比较,确定了震荡30 min、放置过夜的浸提方法浸提效果更好且更利于大批量样品的分析。使用震荡30 min、放置过夜的浸提方法对5个土壤标准物质有效钼进行前处理,其测定值均在标准值范围内;分别在无气体模式和氦气模式下比较了浓度为0mg/L、1mg/L、2mg/L、5mg/L、10mg/L、50mg/L的Mn对5ug/L 95Mo测定浓度的影响,结果表明氦气模式下的动能歧视可有效去除95Mo测定过程中的多原子离子的干扰,氦气模式测定有效钼明显优于无气体模式;分别对待测溶液稀释5倍和未稀释的内标回收率趋势进行监测,发现未稀释的样品内标回收率随着测量样品数的增多呈下降趋势,而稀释5倍对基体干扰的消除有显著效果。对5个土壤样品分别重复测定6次,其RSD均小于4.1%;线性相关系数为1.0000;方法检出限为0.0012 mg/kg。综上,该方法测定土壤有效钼结果准确,重现性好,灵敏度高,且适合大批量样品的分析。     

Determination of folate in infant formula and adult/pediatric nutritional formula by optical biosensor assay: First Action 2011.05

After a review of data from a single-laboratory validation (SLV) study published in the International Dairy Journal 21, 783-789 (2011), a method for folate in infant formula and adult/pediatric nutritional formula was submitted for consideration of adoption by AOAC as an automated assay that is rapid and simple. The method uses an optical biosensor assay to quantitate total folate content in milk and milk-based pediatric and adult nutritional products. The assay uses folate binding protein and a functionalized sensor surface. The SLV showed an instrumental LOD of 0.1 ng/mL (equivalent to 2.5 microg/100 g for a typical infant formula). The method detection limit was 6.5 microg/100 g with a repeatability of 3.48% and an intermediate reproducibility of 4.63% RSD.     

Applications of inductively coupled plasma mass spectrometry and laser ablation inductively coupled plasma mass spectrometry in materials science

Inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) have been applied as the most important inorganic mass spectrometric techniques having multielemental capability for the characterization of solid samples in materials science. ICP-MS is used for the sensitive determination of trace and ultratrace elements in digested solutions of solid samples or of process chemicals (ultrapure water, acids and organic solutions) for the semiconductor industry with detection limits down to sub-picogram per liter levels. Whereas ICP-MS on solid samples (e.g. high-purity ceramics) sometimes requires time-consuming sample preparation for its application in materials science, and the risk of contamination is a serious drawback, a fast, direct determination of trace elements in solid materials without any sample preparation by LA-ICP-MS is possible. The detection limits for the direct analysis of solid samples by LA-ICP-MS have been determined for many elements down to the nanogram per gram range. A deterioration of detection limits was observed for elements where interferences with polyatomic ions occur. The inherent interference problem can often be solved by applying a double-focusing sector field mass spectrometer at higher mass resolution or by collision-induced reactions of polyatomic ions with a collision gas using an ICP-MS fitted with collision cell. The main problem of LA-ICP-MS is quantification if no suitable standard reference materials with a similar matrix composition are available. The calibration problem in LA-ICP-MS can be solved using on-line solution-based calibration, and different procedures, such as external calibration and standard addition, have been discussed with respect to their application in materials science. The application of isotope dilution in solution-based calibration for trace metal determination in small amounts of noble metals has been developed as a new calibration strategy. This review discusses new analytical developments and possible applications of ICP-MS and LA-ICP-MS for the quantitative determination of trace elements and in surface analysis for materials science.     

Selective determination of airborne hexavalent chromium using inductively coupled plasma mass spectrometry

A new method for determining ultra-trace levels of hexavalent chromium in ambient air has been developed. The method involves a 24-h sampling of air into potassium hydroxide solution, followed by silica gel column separation of chromium (VI), then preconcentration by complexation and solvent extraction. The chromium (VI) complex was dissolved in nitric acid. The resultant chromium ions were determined by inductively coupled plasma mass spectrometry (ICP–MS) using a dynamic reaction cell (DRC) with ammonia as the reactive gas to reduce polyatomic interferences. The interconversion of chromium in potassium hydroxide solution and air sample matrix were investigated under ambient conditions. It was found that there was no conversion of chromium (VI) into chromium (III) species. However, it was observed that some chromium (III) species were converted into chromium (VI) species. For a KOH solution containing 100 μg l⁻¹ of chromium (III) species, the rate of conversion was found to be 3% after 24 h exposure, 8% after 48 h, 10% after 72 h and no further conversion was observed thereafter. However, in a solution containing air sample matrix, 9.3% of chromium (III) converted to chromium (VI) within 6 h, and during the course of a 11-day exposure period, 13% (range 8–17%) of chromium (III) converted to chromium (VI). The method detection limit (MDL) for chromium (VI) in potassium hydroxide solution (0.025 M) was found to be 2×10⁻² μg l⁻¹. This is equivalent to 0.2 ng m⁻³ (for 23 m³ air sampled into 200 ml of KOH solution over a 24-h period). The recovery of spiked chromium (VI) from solutions containing air sample matrix was 95±9% (n=8). Matrix related interferences were estimated to be less than 10% based on recovery studies. The concentration of airborne chromium (VI) in Sydney residential areas was found to be less than 0.2 ng m⁻³, however, in industrial areas the concentrations ranged from 0.2 to 1.3 ng m⁻³ using this analytical procedure.     

Analysis of molybdenum oxide by inductively coupled plasma atomic emission and mass spectrometry

Procedures for the analysis of molybdenum oxide by of inductively coupled plasma atomic emission spectroscopy (ICP-AES) and mass spectrometry (ICP-MS) are proposed on the basis of preliminary extraction separation of molybdenum from impurity elements. To separate 39 impurity elements (Li, Be, Na, Mg, Al, K, Ca, Sc, Ti, Cr, Mn, Fe, Co, Ni, Zn, Ga, Rb, Sr, Y, Cd, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Pb, Bi, Th, and U), the extraction of molybdenum from hydrochloric acid solutions using 5-n-pentylthio-8-hydroxyquinoline was used. The capacities of both methods ICP-AES and ICP-MS in the analysis of molybdenum oxide analysis were examined without the removal of the matrix and after the extraction separation of molybdenum.     

Comparison of standard and reaction cell inductively coupled plasma mass spectrometry in the determination of chromium and selenium species by HPLC-ICP-MS

Elemental speciation is becoming a common analytical procedure for geochemical investigations. The various redox species of environmentally relevant metals can have vastly different biogeochemical properties, including sorption, solubility, bioavailability, and toxicity. The use of high performance liquid chromatography (HPLC) coupled to elemental specific detectors, such as inductively coupled plasma mass spectrometry (ICP-MS), has become one of the most important speciation methods employed. This is due to the separation versatility of HPLC and the sensitive and selective detection capabilities of ICP-MS. The current study compares standard mode ICP-MS to recently developed reaction cell (RC) ICP-MS, which has the ability to remove or reduce many common polyatomic interferences that can limit the ability of ICP-MS to quantitate certain analytes in complex matrices. Determination of chromium and selenium redox species is achieved using ion-exchange chromatography with elemental detection by standard and RC-ICP-MS, using various chromium and selenium isotopes. In this study, method performance and detection limits for the various permutations of the method (isotope monitored or ICP-MS detection mode) were found to be comparable and generally less than 1 μg L⁻¹. The method was tested on synthetic laboratory samples, surface water, groundwater, and municipal tap water matrices.     

Isotopic determination of selenium in biological materials with inductively coupled plasma mass spectrometry

A method for the isotopic determination of selenium in biological matrices is described. The method is based on hydride generation inductively coupled plasma mass spectrometry (ICP-MS). The development is specifically related to the requirements of stable isotope tracer studies in human subjects. The method is based on isotope dilution using 82Se as the in vitro spike and can quantify the 74Se and 77Se contents of samples. It involves wet oxidation (HNO3 - H2O2 or HNO3 - HClO4) of the 82Se-spiked matrix, reduction to selenite by boiling with HCl followed by measurement of the isotope ratios (82Se/77Se and 74Se/77Se) in the gas stream (H2Se) generated from on-line reduction of the sample selenite with NaBH4. Compared with the isotopic signal resulting from a selenite solution containing 5 ng ml-1 of Se, the total sample blank contributions at m/z = 74, 77 and 82 were less than 5% of the respective isotope signal. Worst-case absolute detection limits were 0.2-0.9 ng of Se, depending on the isotope used. Ion beam intensity ratios were measured with an over-all precision [relative standard deviation (RSD)] of 1% for both isotope pairs. Measured ratios (MRa/b) were stable during a given day's operation within the expected precision of the measurements but varied for different days. The magnitude of MRa/b was generally independent of the nature of the matrix. Highly linear relationships were found between ion beam intensity ratios (MRa/b) and the corresponding true isotope ratios for calibration solutions whose isotope ratios had been altered by as much as one order of magnitude.(ABSTRACT TRUNCATED AT 250 WORDS)     

Analysis of 5'-mononucleotides in infant formula and adult/pediatric nutritional formula by liquid chromatography: First Action 2011.20

A method for the routine determination of 5'-mononucleotides (uridine 5'-monophosphate, inosine 5'-monophosphate, adenosine 5'-monophosphate, guanosine 5'-monophosphate, and cytidine 5'-monophosphate) in infant formula and adult nutritionals is described. After sample dissolution and addition of internal standard, potential interferences were removed by anion-exchange SPE followed by HPLC-UV analysis. Single-laboratory validation performance parameters include recovery (92-101%) and repeatability (1.0-2.3% RSD). The method was approved for Official First Action status by an AOAC expert review panel.     

A mathematical correction method for spectral interferences on selenium in inductively coupled plasma mass spectrometry

Despite the fact that Se has six isotopes, its determination in biological samples by inductively coupled plasma mass spectrometry is seriously hampered by spectral interferences. The resolution of quadrupole mass analyzers is insufficient to resolve Se(+) from molecular species having the same nominal mass. A mathematical correction method based on signal ratio measurement of (78)Se(+)/(76)Se(+) and (78)Ar(+)(2)/(76)Ar(+)(2) is described. It allows us to correct for the argon dimer interference at m/z 78 and thus to determine Se down to the 1 mug/l level. The method was applied to the determination of Se in human serum. Good agreement with the certified value was obtained.     

Determination of arsenic, selenium, and antimony in cloud water by inductively coupled plasma mass spectrometry

The capability of inductively coupled plasma mass spectrometry in determining trace levels of As, Se, and Sb in cloud water was evaluated. Preliminary studies focused on identifying and eliminating potential interferences in the cloud water matrix, the choice of appropriate internal standards, and system optimization. The detection limits for As, Se, and Sb were 20, 100, 20 pg/mL using pneumatic nebulization, and 5, 25, 5 pg/mL, respectively, using ultrasonic nebulization with a precision of better than 5% RSD. The accuracy was demonstrated by the analysis of a NIST commercial reference material, SRM 1643d. In all cases, the results from ICP-MS analysis agreed within 4% of the certified values. Comparative analysis of cloud water samples obtained from a site downwind from large pollution sources (Whiteface Mountain, New York) and Changlagali Pakistan, a rural mountain peak, was carried out by hydride generation atomic absorption (HGAA) spectrometry. There was excellent agreement between the ICP-MS and HGAA results. Received: 31 July 1997 / Revised: 28 October 1997 / Accepted: 31 October 1997     

Capabilities of microbore columns coupled to inductively coupled plasma mass spectrometry in speciation of arsenic and selenium

The performance of microHPLC-microconcentric nebulizer-inductively coupled plasma-mass spectrometry (ICP-MS) coupling for the simultaneous determination of As(III), As(V), monomethylarsenic acid (MMA), dimethylarsinic acid (DMA), selenite (SeIV) and selenate (SeVI) in water was evaluated. The accurate reduction of the off-column dead volume, specially the capillary of the micronebulizer, as well as the optimization of chromatographic conditions led to the claimed advantages expected for microbore columns: a significant diminution of sample and solvent consumption without sacrificing sensitivity and the overall resolution in faster analysis time (less than 5 min). Detection limits are in the range 0.03-0.04 microg L(-1) for arsenic species and 0.35 microg L(-1) for selenium species. The developed method was validated by analysing different spiked environmental water samples. Linearity, tested up to 50 microg L(-1), showed correlation coefficients above 0.999 and no matrix effect for high saline water samples. Good accuracy and repeatability was obtained for spiked influent and effluent water treatment plant.     

Speciation of chromium in waste water using ion chromatography inductively coupled plasma mass spectrometry

Ion chromatography (IC) coupled with inductively coupled plasma mass spectrometry (ICP-MS) was systematically investigated for determining the speciation of chromium in environmental samples. Firstly, the stability of complexes formed by Cr(III) with various aminopolycarboxylic acids was studied by electrospray ionization mass spectrometry (ESI-MS). The results showed that [Cr(EDTA)]⁻ was stable in solution. Secondly, various mobile phases were examined to separate Cl⁻ from chromium species by IC to avoid Cl⁻ interference. The separation of [Cr(EDTA)]⁻ and Cr(VI) was achieved on a new anion-exchange column (G3154A/102) using a mobile phase containing 20 mM NH₄NO₃ and 10 mM NH₄H₂PO₄ at pH 7.0 without Cl⁻ interference. Detection limits for chromium species were below 0.2 μg/L with a direct injection of sample and without prior removal of interferences from the matrix. Finally, the proposed method was used for the determination of chromium species in contaminated waters.     

Sequential hydride generation/pneumatic nebulisation inductively coupled plasma mass spectrometry for the fractionation of arsenic and selenium species

The toxicity of certain elements is known to be related to their organic substituents and/or oxidation states. As such, total elemental determinations do not always yield sufficient information for accurate risk assessments and therefore speciation or fractionation data are required. In order to obtain fractionation data for trace levels of arsenic and selenium, a novel sequential pneumatic nebulisation (PN)/hydride generation (HG) inductively coupled plasma mass spectrometry (ICP-MS) method was developed. The method offers the advantage of sample introduction via either PN or HG by simply rotating a 4-way switching valve while the system is in operation. In PN mode, the liquid sample is aspirated into ICP, allowing for the determination of the total amount of each element, whilst in HG mode only the arsenic and selenium species that form volatile hydrides are determined. Conveniently, in the case of arsenic, this allows for differentiation between the four most toxic arsenic species (arsenate, arsenite, monomethylarsonic acid and dimethylarsinic acid), which form volatile hydrides, and the virtually non-toxic forms (arsenobetaine, arsenosugars, etc.), which do not. This allows for the rapid estimation of the amounts of toxic and non-toxic arsenic species present in a sample. For arsenic, the technique gave detection limits of 36 ng l⁻¹ in PN mode and 1 ng l⁻¹ in HG mode. For selenium, detection limits of 150 ng l⁻¹ were achieved in PN mode and 220 ng l⁻¹ in HG mode. The technique also gave good long- and short-term stabilities of under 6% RSD for both elements. A variety of samples, including water and urine standard reference materials, were analysed in both modes, and the precision and accuracy of the results for total arsenic and selenium levels were assessed. Using the technique in both modes also allowed for the fractionation of As and Se species into their volatile hydride-forming and non-hydride-forming species. This was particularly informative, with respect to As species present, in the case of a kelp powder extract. Digested tobacco samples were only analysed for their total As levels, in which case results obtained via both sample introduction modes showed good agreement.     

离子色谱(IC)-电感耦合等离子体质谱(ICP-MS)法测定食品接触涂层制品中可迁移六价铬

此研究旨在建立食品接触涂层制品中低含量可迁移六价铬的一种快速、准确的测定方法。试样经过水和4%乙酸迁移试验后,以75 mmol/L硝酸铵溶液（调节pH=7.0）为洗脱液,经过NP5阴离子柱分离,选择碰撞（KED）监测模式,用离子色谱（IC）-电感耦合等离子体质谱（ICP-MS）法测定样品中六价铬的迁移量。实验发现,以水和4%乙酸作模拟物进行迁移试验,六价铬迁移量在0～5.0 μg/L 范围内线性关系良好,相关系数均大于0.999,检出限低至0.05 μg/kg。三种浓度水平的加标回收率试验结果为81.5%～94.7%,精密度结果为3.1%～7.2%。与紫外可见分光光度（UV-Vis）法相比,检出限更低,抗基质干扰性更好。对购于商超和电商平台的多种食品接触涂层制品进行测试,结果显示,该方法快速、准确,适用于食品接触涂层制品中低迁移量的六价铬的快速测定。     

Determination of arsenic, selenium, and antimony in cloud water by inductively coupled plasma mass spectrometry

The capability of inductively coupled plasma mass spectrometry in determining trace levels of As, Se, and Sb in cloud water was evaluated. Preliminary studies focused on identifying and eliminating potential interferences in the cloud water matrix, the choice of appropriate internal standards, and system optimization. The detection limits for As, Se, and Sb were 20, 100, 20 pg/mL using pneumatic nebulization, and 5, 25, 5 pg/mL, respectively, using ultrasonic nebulization with a precision of better than 5% RSD. The accuracy was demonstrated by the analysis of a NIST commercial reference material, SRM 1643d. In all cases, the results from ICP-MS analysis agreed within 4% of the certified values. Comparative analysis of cloud water samples obtained from a site downwind from large pollution sources (Whiteface Mountain, New York) and Changlagali Pakistan, a rural mountain peak, was carried out by hydride generation atomic absorption (HGAA) spectrometry. There was excellent agreement between the ICP-MS and HGAA results.