Strong N−H⋅⋅⋅O Hydrogen Bonding in a Model Compound of the Catalytic Triad in Serine Proteases

Low-barrier hydrogen bond (LBHB) involvement in enzyme catalysis is examined by analysis of experimental nuclear and electron densities of a model compound for the catalytic triad in serine proteases (shown schematically), which is based on a cocrystal of betaine, imidazole, and picric acid. The three short, strong N−H⋅⋅⋅O hydrogen bonds in the structure have varying degrees of covalent bonding contributions suggesting a gradual transition to the LBHB situation.     

Ab initio and density functional theory studies of the catalytic mechanism for ester hydrolysis in serine hydrolases

We present results from ab initio and density functional theory studies of the mechanism for serine hydrolase catalyzed ester hydrolysis. A model system containing both the catalytic triad and the oxyanion hole was studied. The catalytic triad was represented by formate anion, imidazole, and methanol. The oxyanion hole was represented by two water molecules. Methyl formate was used as the substrate. In the acylation step, our computations show that the cooperation of the Asp group and oxyanion hydrogen bonds is capable of lowering the activation barrier by about 15 kcal/mol. The transition state leading to the first tetrahedral intermediate in the acylation step is rate limiting with an activation barrier (ΔE₀) of 13.4 kcal/mol. The activation barrier in the deacylation step is smaller. The double-proton-transfer mechanism is energetically unfavorable by about 2 kcal/mol. The bonds between the Asp group and the His group, and the hydrogen bonds in the oxyanion hole, increase in strength going from the Michaelis complex toward the transition state and the tetrahedral intermediate. In the acylation step, the tetrahedral intermediate is a very shallow minimum on the energy surface and is not viable when molecular vibrations are included. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 69: 89–103, 1998     

Subangstrom crystallography reveals that short ionic hydrogen bonds, and not a His-Asp low-barrier hydrogen bond, stabilize the transition state in serine protease catalysis

To address questions regarding the mechanism of serine protease catalysis, we have solved two X-ray crystal structures of alpha-lytic protease (alphaLP) that mimic aspects of the transition states: alphaLP at pH 5 (0.82 A resolution) and alphaLP bound to the peptidyl boronic acid inhibitor, MeOSuc-Ala-Ala-Pro-boroVal (0.90 A resolution). Based on these structures, there is no evidence of, or requirement for, histidine-flipping during the acylation step of the reaction. Rather, our data suggests that upon protonation of His57, Ser195 undergoes a conformational change that destabilizes the His57-Ser195 hydrogen bond, preventing the back-reaction. In both structures the His57-Asp102 hydrogen bond in the catalytic triad is a normal ionic hydrogen bond, and not a low-barrier hydrogen bond (LBHB) as previously hypothesized. We propose that the enzyme has evolved a network of relatively short hydrogen bonds that collectively stabilize the transition states. In particular, a short ionic hydrogen bond (SIHB) between His57 Nepsilon2 and the substrate's leaving group may promote forward progression of the TI1-to-acylenzyme reaction. We provide experimental evidence that refutes use of either a short donor-acceptor distance or a downfield 1H chemical shift as sole indicators of a LBHB.     

Theoretical studies of the proton transfer behaviors in molecular complexes analogous to catalytic triad of serine protease: Toward understanding the existence and significance of the low-barrier hydrogen-bond in enzymatic catalysis

A representative acetate-(5-methylimidazole)-methanol system has been employed as a model of catalytic triad in serine protease to validate the formation processes of low-barrier H-bonds (LBHB) at the B3LYP/6-311++G** level of theory, and variable H-bonding characters from conventional ones to LBHBs have been represented along with the proceedings of proton transfer. Solvent effect is an important factor in modulation of the existence of an LBHB, where an LBHB (or a conventional H-bond) in the gas phase can be changed into a non-LBHB (an LBHB) upon solvation. The origin of the additional stabilization energy arising from the LBHB may be attributed to the H-bonding energy difference before and after proton transfer because the shared proton can freely move between the proton donor and proton acceptor. Most importantly, the order of magnitude of the stabilization energy depends on the studied systems. Furthermore, the nonexistence of LBHBs in the catalytic triad of serine proteases has been verified in a more sophisticated model treated using the ONIOM method. As a result, only the single proton transfer mechanism in the catalytic triad has been confirmed and the origin of the powerful catalytic efficiency of serine proteases should be attributed to other factors rather than the LBHB. Supported by the National Natural Science Foundation of China (Grant Nos. 20633060 & 20573063), the Natural Science Foundation of Shandong Province (Grant No. Y2007B23), the Scientific Research Foundation of Qufu Normal University (Grant Nos. Bsqd2007003 and Bsqd2007008), and the State Key Laboratory of Physical Chemistry of Solid Surfaces (Xiamen University)     

Acylation is rate-limiting in glycosylasparaginase-catalyzed hydrolysis of N4-(4'-substituted phenyl)-L-asparagines

Glycosylasparaginase catalyzes the hydrolysis of the N-glycosylic bond between N-acetyl-D-glucosamine and L-asparagine in the catabolism of glycoproteins. The mechanism has been proposed to resemble that of serine proteases involving an acylation step where a nucleophilic attack by a catalytic Thr residue on the carbonyl carbon of the N-glycosylic bond gives rise to a covalent beta-aspartyl-enzyme intermediate, and a deacylation step to give the final products. The question posed in this study was: Is the acylation step the rate-limiting step in the hydrolysis reaction as in serine proteases? To answer this question a series of mostly new substituted anilides was synthesized and characterized, and their hydrolysis reactions catalyzed by glycosylasparaginase from human amniotic fluid were studied. Five N4-(4'-substituted phenyl)-L-asparagine compounds were synthesized and characterized: 4'-hydrogen, 4'-ethyl, 4'-bromo, 4'-nitro, and 4'-methoxy. Each of these anilides was a substrate for the enzyme. Hammett plots of the kinetic parameters showed that acylation is the rate-limiting step in the reaction and that upon binding the electron distribution of the substrate is perturbed toward the transition state. This is the first direct evidence that acylation is the rate-limiting step in the enzyme-catalyzed reaction. A Br?nsted plot indicates a small, negative charge (-0.25) on the nitrogen atom of the leaving group anilines containing electron-withdrawing groups, and a small, positive charge (0.43) on the nitrogen atom of the leaving group anilines containing electron-donating groups. The free energy (incremental) change of binding (delta deltaGb) in the enzyme-substrate transition state complexes shows that substitution of a substituted phenyl group for the pyranosyl group in the natural substrate results in an overall loss of binding energy equivalent to a weak hydrogen bond, the magnitude of which is dependent on the substituent group. The data are consistent with a mechanism for glycosylasparaginase involving rapid formation of a tetrahedral structure upon substrate binding, and a rate-limiting breakdown of the tetrahedral structure to a covalent beta-aspartyl-enzyme intermediate that is dependent on the electronic properties of the substituent group and on the degree of protonation of the leaving group in the transition state by a general acid.     

Role of the catalytic triad and oxyanion hole in acetylcholinesterase catalysis: an ab initio QM/MM study

The initial step of the acylation reaction catalyzed by acetylcholinesterase (AChE) has been studied by a combined ab initio quantum mechanical/molecular mechanical (QM/MM) approach. The reaction proceeds through the nucleophilic addition of the Ser203 O to the carbonyl C of acetylcholine, and the reaction is facilitated by simultaneous proton transfer from Ser203 to His447. The calculated potential energy barrier at the MP2(6-31+G) QM/MM level is 10.5 kcal/mol, consistent with the experimental reaction rate. The third residue of the catalytic triad, Glu334, is found to be essential in stabilizing the transition state through electrostatic interactions. The oxyanion hole, formed by peptidic NH groups from Gly121, Gly122, and Ala204, is also found to play an important role in catalysis. Our calculations indicate that, in the AChE-ACh Michaelis complex, only two hydrogen bonds are formed between the carbonyl oxygen of ACh and the peptidic NH groups of Gly121 and Gly122. As the reaction proceeds, the distance between the carbonyl oxygen of ACh and NH group of Ala204 becomes smaller, and the third hydrogen bond is formed both in the transition state and in the tetrahedral intermediate.     

Role of Asp102 in the catalytic relay system of serine proteases: a theoretical study

The role of Asp102 in the catalytic relay system of serine proteases is studied theoretically by calculating the free energy profiles of the single proton-transfer reaction by the Asn102 mutant trypsin and the concerted double proton-transfer reaction (so-called the charge-relay mechanism) of the wild-type trypsin. For each reaction, the reaction free energy profile of the rate-determining step (the tetrahedral intermediate formation step) is calculated by using ab initio QM/MM electronic structure calculations combined with molecular dynamics-free energy perturbation method. In the mutant reaction, the free energy monotonically increases along the reaction path. The rate-determining step of the mutant reaction is the formation of tetrahedral intermediate complex, not the base (His57) abstraction of the proton from Ser195. In contrast to the single proton-transfer reaction of the wild-type, MD simulations of the enzyme-substrate complex show that the catalytically favorable alignment of the relay system (the hydrogen bonding network between the mutant triad, His57, Asn102, and Ser195) is rarely observed even in the presence of a substrate at the active site. In the double proton-transfer reaction, the energy barrier is observed at the proton abstraction step, which corresponds to the rate-determining step of the single proton-transfer reaction of the wild-type. Although both reaction profiles show an increase of the activation barrier by several kcals/mol, these increases have different energetic origins: a large energetic loss of the electrostatic stabilization between His57 and Asn102 in the mutant reaction, while the lack of stabilization by the protein environment in the double proton-transfer reaction. Comparing the present results with the single proton transfer of the wild-type, Asp102 is proven to play two important roles in the catalytic process. One is to stabilize the protonated His57, or ionic intermediate, formed during the acylation, and the other is to fix the configuration around the active site, which is favorable to promote the catalytic process. These two factors are closely related to each other and are indispensable for the efficient catalysis. Also the present calculations suggest the importance of the remote site interaction between His57 and Val213-Ser214 at the catalytic transition state.     

2-(2'-羟基-5'-甲基苯基)苯并三氮唑质子转移的光谱和反应机理

用AM1和INDO/CI方法研究了2-(2'-羟基-5'-甲基苯基)苯并三氮唑的激发态质子转移反应, 求得基态和激发态反应的位能面、势垒和过渡态; 研究了异构体的稳定性、氢键强度及光谱的指认, 计算结果均与实验结果符合。讨论了对光诱导质子转移的机理和应用前景。     

On the Possibility of Using UV Spectroscopy as a Measure of the Low-Barrier Hydrogen Bond

In many enzyme-catalyzed biochemical pathways, a short, strong hydrogen bond between an enzyme and substrate is an important structural feature. These bonds are termed low-barrier hydrogen bonds. In this paper, we show that UV spectra can be used as an experimental technique to determine if a system contains a low-barrier hydrogen bond (LBHB). We simulate, using the time-dependent view of UV spectroscopy, several different UV spectra: absorption, photodissociation, and emission, on systems containing a low-barrier hydrogen bond. We find several distinguishing spectral features in these UV spectra for systems that possess a LBHB.     

Correlated proton motion in hydrogen bonded systems: tuning proton affinities

The theorem of matching proton affinities (PA) has been widely used in the analysis of hydrogen bonds. However, most experimental and theoretical investigations have to cope with the problem that the variation of the PA of one partner in the hydrogen bond severely affects the properties of the interface between both molecules. The B3LYP/d95+(d,p) analysis of two hydrogen bonds coupled by a 5-methyl-1H-imidazole molecule showed that it is possible to change the PA of one partner of the hydrogen bond while maintaining the properties of the interface. This technique allowed us to correlate various properties of the hydrogen bond directly with the difference in the PAs between both partners: it is possible to tune the potential energy surface of the bonding hydrogen atom from that of an ordinary hydrogen bond (localized hydrogen atom) to that of a low barrier hydrogen bond (LBHB, delocalized hydrogen atom) just by varying the proton affinity of one partner. This correlation shows clearly that matching PAs are of lesser importance for the formation of a LBHB than the relative energy difference between the two tautomers of the hydrogen bond.     

A quantum description of the proton movement in an idealized NHN+ bridge

A series of model calculations was done to analyze the delocalization of the proton in the linking hydrogen bond of the (Dih)(2)H(+) cation (Dih: 4,5-dihydro-1H-imidazole). Standard quantum chemical calculations (B3LYP/D95+(d,p)) predict a low barrier hydrogen bond (LBHB) and thereby a delocalized proton in the NHN(+) hydrogen bridge. Explicit quantum calculations on the proton indicate that the delocalization of the proton does not provide enough energy to stabilize a permanent LBHB. Additional Born-Oppenheimer Molecular Dynamics (BOMD) simulations indicate further that the proton is localized at either side of the NHN(+) bridge and that a central proton position is the result of temporal averaging. The possibility of the proton to tunnel from one side to the other side of the NHN(+) bridge increases with the temperature as the trajectory of the (Dih)(2)H(+) cation runs through regions where the thermal excitation of Dih ring vibrations creates equal bonding opportunities for the proton on both sides of the bridge (vibrationally assisted proton tunneling). The quantum calculations for the proton in (Dih)(2)H(+) suggest further a broad peak for the 1 ← 0 transition with a maximum at 938 cm(-1) similar to that observed for LBHBs. Moreover, the asymmetric NHN(+) bridge in a thermally fluctuating environment is strong enough to create a significant peak at 1828 cm(-1) for the 2 ← 0 transition, while contributions from the 2 ← 1 are expected to be weak for the same reason.     

Molecular dynamics simulations of the catalytic pathway of a cysteine protease: a combined QM/MM study of human cathepsin K

Molecular dynamics simulations using a combined QM/MM potential have been performed to study the catalytic mechanism of human cathepsin K, a member of the papain family of cysteine proteases. We have determined the two-dimensional free energy surfaces of both acylation and deacylation steps to characterize the reaction mechanism. These free energy profiles show that the acylation step is rate limiting with a barrier height of 19.8 kcal/mol in human cathepsin K and of 29.3 kcal/mol in aqueous solution. The free energy of activation for the deacylation step is 16.7 kcal/mol in cathepsin K and 17.8 kcal/mol in aqueous solution. The reduction of free energy barrier is achieved by stabilization of the oxyanion in the transition state. Interestingly, although the "oxyanion hole" has been formed in the Michaelis complex, the amide units do not donate hydrogen bonds directly to the carbonyl oxygen of the substrate, but they stabilize the thiolate anion nucleophile. Hydrogen-bonding interactions are induced as the substrate amide group approaches the nucleophile, moving more than 2 A and placing the oxyanion in contact with Gln19 and the backbone amide of Cys25. The hydrolysis of peptide substrate shares a common mechanism both for the catalyzed reaction in human cathepsin K and for the uncatalyzed reaction in water. Overall, the nucleophilic attack by Cys25 thiolate and the proton-transfer reaction from His162 to the amide nitrogen are highly coupled, whereas a tetrahedral intermediate is formed along the nucleophilic reaction pathway.     

The charge density distribution in a model compound of the catalytic triad in serine proteases

Combined low temperature (28(1) K) X-ray and neutron diffraction measurements were carried out on the co-crystallised complex of betaine, imidazole, and picric acid (1). The experimental charge density was determined and compared with ab initio theoretical calculations at the B3LYP/6-311G(d,p) level of theory. The complex serves as a model for the active site in, for example, the serine protease class of enzymes, the so-called catalytic triad. The crystal contains three short strong N-H...O hydrogen bonds (HBs) with dN...O < 2.7 A. The three HBs have energies above 13 kcalmol(-1), although the hydrogen atoms are firmly localized in the "nitrogen wells". This suggests that low-barrier hydrogen bonding in catalytic enzyme reactions may be a sufficient, but not a necessary, condition for obtaining transition-state stabilization. Structural analysis (e.g., covalent N-H bond lengthening) indicates that the hydrogen bond between H3A and 08 of imidazole and betaine respectively (HB2) is slightly stronger than the bond between H1A and O1A of imidazole and picric acid (HB1), although HB1 is shorter than HB2: (dN...O(HB1)= 2.614(1) A, dN...O(HB2) = 2.684(1) A, dH...O(HB1) = 1.630(1) A, dH...O(HB2)= 1.635(1) A, dN-H(HB1) = 1.046(1) A, dN-H(HB2) = 1.057(1) A). Furthermore, the charge density analysis reveals that HB2 has a larger covalent character than HB1, with considerable polarization of the density towards the acceptor atom. The Gatti and Bader source function (S) is introduced to the analysis of strong HBs. The source function is found to be a sensitive measure for the nature of a hydrogen bond, and comparison with low-barrier and single-well hydrogen bonding systems (e.g., benzoylacetone and nitromalonamide) shows that the low-barrier hydrogen bond (LBHB) state is characterized by an enormously increased hydrogen atom source contribution to the bond critical point in the HB. In this context, HB2 can be characterized as intermediate between localized HBs and delocalized LBHBs.     

Investigation of the mechanism of the cell wall DD-carboxypeptidase reaction of penicillin-binding protein 5 of Escherichia coli by quantum mechanics/molecular mechanics calculations

Penicillin-binding protein 5 (PBP 5) of Escherichia coli hydrolyzes the terminal D-Ala-D-Ala peptide bond of the stem peptides of the cell wall peptidoglycan. The mechanism of PBP 5 catalysis of amide bond hydrolysis is initial acylation of an active site serine by the peptide substrate, followed by hydrolytic deacylation of this acyl-enzyme intermediate to complete the turnover. The microscopic events of both the acylation and deacylation half-reactions have not been studied. This absence is addressed here by the use of explicit-solvent molecular dynamics simulations and ONIOM quantum mechanics/molecular mechanics (QM/MM) calculations. The potential-energy surface for the acylation reaction, based on MP2/6-31+G(d) calculations, reveals that Lys47 acts as the general base for proton abstraction from Ser44 in the serine acylation step. A discrete potential-energy minimum for the tetrahedral species is not found. The absence of such a minimum implies a conformational change in the transition state, concomitant with serine addition to the amide carbonyl, so as to enable the nitrogen atom of the scissile bond to accept the proton that is necessary for progression to the acyl-enzyme intermediate. Molecular dynamics simulations indicate that transiently protonated Lys47 is the proton donor in tetrahedral intermediate collapse to the acyl-enzyme species. Two pathways for this proton transfer are observed. One is the direct migration of a proton from Lys47. The second pathway is proton transfer via an intermediary water molecule. Although the energy barriers for the two pathways are similar, more conformers sample the latter pathway. The same water molecule that mediates the Lys47 proton transfer to the nitrogen of the departing D-Ala is well positioned, with respect to the Lys47 amine, to act as the hydrolytic water in the deacylation step. Deacylation occurs with the formation of a tetrahedral intermediate over a 24 kcal x mol(-1) barrier. This barrier is approximately 2 kcal x mol(-1) greater than the barrier (22 kcal x mol(-1)) for the formation of the tetrahedral species in acylation. The potential-energy surface for the collapse of the deacylation tetrahedral species gives a 24 kcal x mol(-1) higher energy species for the product, signifying that the complex would readily reorganize and pave the way for the expulsion of the product of the reaction from the active site and the regeneration of the catalyst. These computational data dovetail with the knowledge on the reaction from experimental approaches.     

Identification of an acyl-enzyme intermediate in a meta-cleavage product hydrolase reveals the versatility of the catalytic triad

Meta-cleavage product (MCP) hydrolases are members of the α/β-hydrolase superfamily that utilize a Ser-His-Asp triad to catalyze the hydrolysis of a C-C bond. BphD, the MCP hydrolase from the biphenyl degradation pathway, hydrolyzes 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid (HOPDA) to 2-hydroxypenta-2,4-dienoic acid (HPD) and benzoate. A 1.6 ? resolution crystal structure of BphD H265Q incubated with HOPDA revealed that the enzyme's catalytic serine was benzoylated. The acyl-enzyme is stabilized by hydrogen bonding from the amide backbone of 'oxyanion hole' residues, consistent with formation of a tetrahedral oxyanion during nucleophilic attack by Ser112. Chemical quench and mass spectrometry studies substantiated the formation and decay of a Ser112-benzoyl species in wild-type BphD on a time scale consistent with turnover and incorporation of a single equivalent of (18)O into the benzoate produced during hydrolysis in H(2)(18)O. Rapid-scanning kinetic studies indicated that the catalytic histidine contributes to the rate of acylation by only an order of magnitude, but affects the rate of deacylation by over 5 orders of magnitude. The orange-colored catalytic intermediate, ES(red), previously detected in the wild-type enzyme and proposed herein to be a carbanion, was not observed during hydrolysis by H265Q. In the newly proposed mechanism, the carbanion abstracts a proton from Ser112, thereby completing tautomerization and generating a serinate for nucleophilic attack on the C6-carbonyl. Finally, quantification of an observed pre-steady-state kinetic burst suggests that BphD is a half-site reactive enzyme. While the updated catalytic mechanism shares features with the serine proteases, MCP hydrolase-specific chemistry highlights the versatility of the Ser-His-Asp triad.     

磷酰化丝氨酸形成六配位磷中间体的理论研究

用MNDO方法对磷酰化丝氨酸仿生化反应机理中六配位磷中间体的形成过程进行了研究.磷酰化丝氨酸(1)形成分子内磷酸-羧酸分子内混酐的五配位磷中间体(2)后,其酸性质子解离,分子经过具有氢桥键结构的过渡态,使氨基酸侧链羟基上的氢通过氢键作用向磷上的O₁进行转移,然后再经过构型由三角双锥向八面体的转变,形成六配位磷中间体(3).氢桥键的存在使反应过渡态能量降低,其相对能量为148.5kJ/mol.理论计算较成功的解释了六配位磷中间体的形成机理以及磷酰化丝氨酸仿生化反应中羧基和侧链羟基共同参与的实验结果.     

Theoretical perspectives on the reaction mechanism of serine proteases: the reaction free energy profiles of the acylation process

The reaction mechanism of serine proteases (trypsin), which catalyze peptide hydrolysis, is studied theoretically by ab initio QM/MM electronic structure calculations combined with Molecular Dynamics-Free Energy Perturbation calculations. We have calculated the entire reaction free energy profiles of the first reaction step of this enzyme (acylation process). The present calculations show that the rate-determining step of the acylation is the formation of the tetrahedral intermediate, and the breakdown of this intermediate has a small energy barrier. The calculated activation free energy for the acylation is approximately 17.8 kcal/mol at QM/MM MP2/(aug)-cc-pVDZ//HF/6-31(+)G/AMBER level, and this reaction is an exothermic process. MD simulations of the enzyme-substrate (ES) complex and the free enzyme in aqueous phase show that the substrate binding induces slight conformational changes around the active site, which favor the alignment of the reactive fragments (His57, Asp102, and Ser195) together in a reactive orientation. It is also shown that the proton transfer from Ser195 to His57 and the nucleophilic attack of Ser195 to the carbonyl carbon of the scissile bond of the substrate occur in a concerted manner. In this reaction, protein environment plays a crucial role to lowering the activation free energy by stabilizing the tetrahedral intermediate compared to the ES complex. The polarization energy calculations show that the enzyme active site is in a very polar environment because of the polar main chain contributions of protein. Also, the ground-state destabilization effect (steric strain) is not a major catalytic factor. The most important catalytic factor of stabilizing the tetrahedral intermediate is the electrostatic interaction between the active site and particular regions of protein: the main chain NH groups in Gly193 and Ser195 (so-called oxyanion hole region) stabilize negative charge generated on the carbonyl oxygen of the scissile bond, and the main chain carbonyl groups in Ile212 approximately Ser214 stabilize a positive charge generated on the imidazole ring of His57.     

咔咯锰(Ⅲ)配合物催化RNA磷酸二酯类似物HpPNP的水解断裂反应机理

采用密度泛函B3LYP方法研究了咔咯锰(Ⅲ)配合物催化水解断裂RNA磷酸二酯类似物2-羟丙基-4-硝基苯基磷酸酯(HpPNP)的反应机理以及中位取代基的性质和数目对反应能垒的影响。计算结果表明:断裂反应以特殊碱催化(SBC)机理进行,咔咯锰(Ⅲ)配合物与HpPNP形成双氢键和双配位独特的过渡态结构,经由P-O键断裂后形成产物。与无催化剂时相比,带吸电子取代基的咔咯锰(Ⅲ)配合物的催化能使反应能垒下降4%~34%。咔咯锰(Ⅲ)配合物中位的吸电子取代基效应能显著降低反应能垒,促进水解断裂反应的进行。     

Low‐Barrier and Canonical Hydrogen Bonds Modulate Activity and Specificity of a Catalytic Triad

The position, bonding and dynamics of hydrogen atoms in the catalytic centers of proteins are essential for catalysis. The role of short hydrogen bonds in catalysis has remained highly debated and led to establishment of several distinctive geometrical arrangements of hydrogen atoms vis‐à‐vis the heavier donor and acceptor counterparts, that is, low‐barrier, single‐well or short canonical hydrogen bonds. Here we demonstrate how the position of a hydrogen atom in the catalytic triad of an aminoglycoside inactivating enzyme leads to a thirty‐fold increase in catalytic turnover. A low‐barrier hydrogen bond is present in the enzyme active site for the substrates that are turned over the best, whereas a canonical hydrogen bond is found with the least preferred substrate. This is the first comparison of these hydrogen bonds involving an identical catalytic network, while directly demonstrating how active site electrostatics adapt to the electronic nature of substrates to tune catalysis.     

(19)F-encoded combinatorial libraries: discovery of selective metal binding and catalytic peptoids

A (19)F NMR method for encoding of combinatorial libraries has been developed. Aryl fluorides whose chemical shifts are modified by aromatic substituents were prepared and attached to resin support beads that were used in the split-pool synthesis of peptoids. The detection of the (19)F NMR signal of tags derived from a single "big bead" was demonstrated. The library diversity arises from peptoid amines and the cyclic anhydrides used in their acylation. The resulting 90-compound library was examined for metal ion binding, and novel ligands for iron and copper were discovered. Their binding constants were determined to be in the low micromolar range using conventional methods. The library was also examined for autocatalysis of acylation, and a molecule possessing the catalytic triad of serine proteases was deduced.