High resolution digital holography

In digital Fresnel holography, present specifications of charge-coupled device cameras require the incident beams to be quasi-parallel. That implies large speckle grain size and low lateral resolution in reconstructed images. Better lateral resolutions are demonstrated in our work, down to 8 μm, allowing the observation of sub-millimetre objects by digital holography. The experimental set-up built samples the incident light distribution with a definition of 500 pixels mm⁻¹. The maximum acceptable angle is then widened and the hologram recording and reconstruction distances are drastically reduced, as well as the speckle size. Interferometric holography was implemented for the measurement of the deformation of a sub-millimetre silicon cantilever and results in phase-contrasts imaging are also reported. The design of dedicated complementary metal-oxide-semiconductor active pixel sensor cameras is also discussed.     

基于空间光调制器的非相干数字全息单次曝光研究

菲涅耳非相干相关全息术(Fresnel incoherent correlation holography,FINCH)利用在空间光调制器(spatial light modulator,SLM)上加载双透镜模式对同一物点光分束自相干,并通过改变加载的相位因子得到不同的相移全息图.本系统利用SLM可分区编码调制特性,将FINCH成像中SLM上分三次加载的0°,120°,240°相位双透镜掩模各提取1/3组成一幅复合相移模式加载,并研究了三种相位分布方式对FINCH成像质量的影响.结果表明:三个相位在SLM上分布间隔越大,再现像越清晰.在此基础上,提出了一种新的掩模加载方式,在SLM加载透镜阵列,每一个相位因子对应一个双透镜,具有一个光轴.实验表明,通过这种加载方式,通过SLM后形成的三个相移图能够一次在电荷耦合器上记录,并且三个相移图不重叠,然后通过MATLAB编程计算将不同相移角度的全息图分别提取出来,通过三步相移计算合成一幅包含有物光波的复值全息图,最后通过数值再现算法重建待测样品.此系统可用于对光源相干性较低的实时成像系统,也为微小形变测量、动态物体的观测提供了新方法,为非相干数字全息术的发展提供了新思路.     

Optical encryption of gray-level image using on-axis and 2-f digital holography with two-step phase-shifting method

In this paper we propose an encryption/decryption technique of gray-level image information using an on-axis 2-f digital holographic optical encrypting system with two-step phase-shifting method. This technique reduces the number of holograms in phase-shifting digital holography and minimizes the setup of the encryption system more than multistep phase-shifting technique. We are able to get the complete decrypted image by controlling the K-ratio which is defined as the reference beam intensity versus the object beam intensity. We remove the DC-term of the phase-shifting digital hologram to reconstruct and decrypt the original image information. Simulation results show that the proposed method can be used for encryption and decryption of a 256 gray-level image. Also, the result shows some errors of the decrypted image according to K-ratio.     

Image encryption based on pure intensity random coding and digital holography technique

We propose a novel image encryption method that combines the pure intensity random encoding and the digital holography technique. A phase-shifting interferometer records both phase and amplitude information of a complex object with a CCD sensor array. The encryption is performed by placing two pure intensity random masks between the image to be encrypted and an intensity recording device. Electronic decryption can be performed with fast Fresnel reconstruction procedure. Numerical simulation results show the validity of the algorithm and an optoelectronic implementation setup is also presented.     

Use of digital color holography for crack investigation in electronic components

This paper presents the experimental optical analysis of the crack inside an electronic component. The optical setup is used to carry out multidimensional deformation measurements using digital color holography and the spatial multiplexing of holograms. Since the Fresnel transform method depends on wavelength, a wavelength-dependent-zero-padding algorithm is described and results in a rigorous sizing of each reconstructed monochrome image. The criterion to optimize the parameters is presented and is based on minimizing the widening of the impulse response of the full recording/reconstruction process. The application of the proposed method is illustrated through the analysis of the mechanical deformation of the electronic component, and offers keys to understand its failure mode in industrial conditions.     

An encryption scheme based on phase-shifting digital holography and amplitude-phase disturbance

In this paper, we propose an encryption scheme based on phase-shifting digital interferometry. According to the original system framework, we add a random amplitude mask and replace the Fourier transform by the Fresnel transform.We develop a mathematical model and give a discrete formula based on the scheme, which makes it easy to implement the scheme in computer programming. The experimental results show that the improved system has a better performance in security than the original encryption method. Moreover, it demonstrates a good capability of anti-noise and anti-shear robustness.     

Spatial and temporal coherence effects in interference microscopy and full‐field optical coherence tomography

Low‐coherence optical microscopy or optical coherence microscopy uses light with short coherence length. The well‐known case is: “white‐light interferometry”, which became recently more known as: “optical coherence tomography”. However, when lenses and microscope objectives are used to create interferometric images, in what is known classically as “interference microscopy” or today as “full‐field optical coherence tomography” the spatial coherence starts to play a critical role. In this article the coherence effects in low‐coherence optical microscopy are reviewed. As this technology is becoming increasingly publicized due to its importance in three‐dimensional imaging, particularly of scattering biological media and optical metrology, the understanding of the fundamental physics behind it is essential. The interplay between longitudinal spatial coherence and temporal coherence and the effects associated with them are discussed in detail particularly when high numerical apertures are used. An important conclusion of this study is that a high‐contrast, high‐resolution system for imaging of multilayered samples is the one that uses narrowband illumination and high‐NA objectives with an index‐matching fluid. Such a system, when combined with frequency‐domain operation, can reveal nearly real‐time three‐dimensional images, and is thus competitive with confocal microscopy.     

基于位相变更的非相干数字全息自适应成像

菲涅耳非相干数字全息作为一种非扫描的三维成像技术具有其独特的优势,但其成像过程中会受到各种像差的影响,导致成像分辨率、再现像的质量降低.为了解决这一问题,可以结合适当的自适应光学技术对波前像差进行探测和校正.位相变更是一种基于两幅具有已知位相差的强度图像实现波前探测和像差校正的技术.本文发展了基于位相变更的非相干数字全息自适应成像技术,不需要引入引导星,利用全息记录过程中的两幅相移全息图,实现波前像差的探测.本文给出了所发展技术的数值仿真和实验结果,结合位相变更算法求解出系统像差的位相分布,将像差的共轭位相加载到光瞳面上,在全息图记录的同时校正像差,从而提高重建像的质量.     

数字全息成像技术测量侧边抛磨光纤包层剩余厚度

测量侧边抛磨光纤（side polished fiber,SPF）的包层剩余厚度对其应用有重要的指导意义,现今的测量方法均有所不足,现提出一种基于数字全息技术的测量方法。利用单模光纤纤芯折射率比包层折射率高的特点,基于数字全息成像技术,通过角谱传播法对二维全息图进行相位重构,并通过精确最小二乘法解相位包裹,得到侧边抛磨光纤的相位分布图。根据重构的相位分布图,进一步运用相关的边缘提取算法处理得到侧边抛磨光纤包层剩余厚度。实验测量结果与电子扫描电镜（SEM）测量结果相比,测量相对误差小于0.5%。这种测量方法是一种直接测量方法,减小了间接测量法中由于光纤不对称以及SPF轮廓边缘衍射所带来的测量误差,为侧边抛磨光纤包层剩余厚度的无损、在线测量提供了一种新的途径。同时,此方法还可应用于测量其他特种光纤,例如光子晶体光纤、微纳光纤等。     

光学扫描全息术的推广

给出了光学扫描全息术的基本原理。记录时用实时 FZP与物体强度透射率发生卷积从而产生扫描全息图 ;再现时用与记录时相对应的 FZP与全息图信号发生卷积即可再现出物体的信息。推广了光学扫描全息术 ,提出只要某一实时的光场强度分布函数具有如下性质 :(l)该函数中含有 x,y,z参量且相对于 z参量具有圆对称性 ;(2 )对于某一确定的 z参量 ,该函数的自相关是δ函数 ,就可以把该光场作为光学扫描全息术中的照明光场对物体进行扫描记录以得到扫描全息图。     

光场空间相干性的测量方法及比较

本文归纳了基于分波前干涉原理的具有代表性的干涉测量方法——杨氏双孔干涉法、逆波前杨氏干涉法和非冗余孔径阵列干涉测量法,以及基于分振幅干涉原理的干涉测量方法——自参考干涉测量法;介绍了各种测量方法的工作原理、实验配置;比较了4种测量方法的优缺点,并给出每种方法的最佳应用领域。本文结论可为根据对空间相干性测量的不同要求,选择合适的测量方法提供初步参考。     

Twin-image elimination in optical scanning holography

We propose a novel multiplexing technique to solve the twin image problem in optical scanning holography without the use of a spatial carrier, as commonly used in conventional off-axis holography. The technique involves simultaneously acquiring sine and cosine Fresnel zone-lens plate coded images by optical scanning. A complex addition of the two coded images will then be performed and decoded to give a twin-image rejection reconstruction. Computer simulations will be presented to demonstrate the validity of the idea.     

Measuring spatial coherence by using a mask with multiple apertures

A simple method to measure the complex degree of spatial coherence of a partially coherent quasi-monochromatic light field is presented. The Fourier spectrum of the far-field interferogram generated by a mask with multiple apertures (small circular holes) is analyzed in terms of classes of aperture pairs. A class of aperture pairs is defined as the set of aperture pairs with the same separation vector. The height of the peaks in the magnitude spectrum determines the modulus of the complex degree of spatial coherence and the corresponding value in the phase spectrum determines the phase of the complex degree of spatial coherence. The method is illustrated with experimental results.     

点源参考光数字全息的频谱和记录能力分析

基于最高空间频率分析法,对点源参考光数字全息的空间频谱进行了分析,得出了使空间频谱分离的条件。结合全息成像系统的分辨率,推导出了同时满足采样和再现像分离的记录条件以及CCD对被记录物体的数据记录能力。结果表明,对给定的物体和CCD来说,采用点源参考光比采用平面参考光更容易满足采样和分离的条件,并可以记录到更多的物体信息,从而可使再现像获得更高的分辨率。     

基于数字全息的热透镜效应测量

提出一种数字全息定量测量半导体激光二极管侧面泵浦Nd∶YAG晶体热透镜效应的方法。CCD采集Nd∶YAG晶体在不同泵浦电流下的数字全息图,通过数值重建得到热透镜效应引起的相位分布及其变化过程。再由相位分布计算得到对应的热透镜焦距。实验结果表明,利用数字全息技术可以准确和有效测量热透镜效应及热透镜焦距。     

光源对相干层析系统特性的影响

在分析相干层析系统成像机理的基础上，从理论上研究了光源对系统成像特性的影响，在考虑干涉条纹的强度用概率函数处理的条件下，由分析得出相干层析成像系统相当于一个复振幅的线性空间不变系统，从而给出相干函数和光源的功率谱密度之间的关系。通过对使用不同光源的系统相干传递函数比较，得出了采用具有较大线宽的低相干光源，系统的空间分辨率更好，可使测量更精确的结论。本文的工作为光学相干层析成像系统的优化设计提供了理论依据。     

孪生光束干涉法测量光源的空间相干性

定量测定光源空间相干性在部分相干光成像, 非相干全息术及光信息处理领域具有重要的研究价值. 本文基于三角全息干涉光路提出了一种测量光源空间相干性的新方法. 利用三角干涉全息光路系统中分束镜产生的孪生光束进行干涉获得干涉图, 通过调整光源中心位置在写入平面内偏离光轴的量, 改变两孪生光束空间分离量的大小, 采集对应的一系列干涉图, 计算干涉图样的对比度, 从而对光源照明空间的波前上一系列不同距离的点对之间的空间复相干度进行测量. 实验系统光路配置较为简单且不需要使用特殊加工的光学元件. 针对一个准单色的扩展光源设计并进行实验, 结果表明利用文中提出的方法可以准确的测量光源的空间相干性, 实验结果相对于理论计算值的误差仅为3.8%. 关键词： 相干性 全息干涉 干涉仪 光学应用     

散射光彩色数字全息光学系统及波面重建算法研究

令物体表面为散射面,参考光及重建光为球面波,详细研究了离轴数字全息物光场重建平面的光波场.导出物光、共轭物光及零级衍射光分布与光学系统参数的关系.根据彩色数字全息的特点,提出抑制零级衍射干扰的光学系统设计方法,并且对一种能够避免插值误差的波面重建算法进行了优化研究,给出了相应的实验证明.     

CG光学扫描全息术和FZP光学扫描全息术分辨率比较

本文通过计算机仿真对ＦＺＰ 光学扫描全息术和ＣＧ 光学扫描全息术的横向和纵向分辨率进行了比较。无论是ＦＺＰ 还是ＣＧ 光学扫描全息术,其系统的分辨率与它们的环数有关,当环数越多时,分辨率越高。对于同样大小的ＦＺＰ 和ＣＧ,ＣＧ 光学扫描全息系统的分辨率比ＦＺＰ 光学扫描全息系统的分辨率要好     

Influences of control coherence and decay coherence on optical bistability in a semiconductor quantum well

We discuss the influences of two different types of mechanisms of quantum coherence on optical bistability in a semiconductor quantum well structure.In the first mechanism,only quantum coherence induced by the resonant coupling of a strong control laser is considered.In the second mechanism,the decay coherence is taken into account under the condition where the control field is weak.In two different cases,optical bistability can be obtained through choosing appropriate physical parameters.Our studies show quantum coherence makes the optical nonlinear effect of the system become stronger,which takes an important role in the process of generating optical bistability.A semiconductor quantum well with flexibility and easy integration in design could potentially be exploited in real solid-state devices.